Sends and recieves X10 commands and events to/from pimatic using mochad (an X10-controller controller) for X10 devices and sensors.
This plugin allows you to recieve and send command to/from X10 devices.
pimatic-mochad-simple gives you the abililty to monitor activity of your X-10 connected devices and sensors via RF (433 Mhz) and powerline (PL) interfaces. Mochad already translates the X10 activity to plain text format, this plugin simply sets a device attribute to reflect the commands. You can then use the excellent pimatic rules engine to drive other things using this attribute.
This plugin also allows you to send commands to X10 - however it doesn't directly attempt to preserve the X10 states, simply passes the commands down to X10, and lets pimatic do the state management. So for example if your X-10 light is initially turned on by pimatic, the pimatic UI will show the light as on, if you use another controller to turn it off, that status will not be reflected in Pimatic. However if you want to see accurate status in pimatic you can do this by creating a rule. The reason for this compromise is that most X-10 devices are natively one-way and status can impossible hard to track. In a future version I will create a new device type which will be a buttons only, to match X10 remotes behaviour.
X-10 has been around forever, I have used X-10 equipment for over 20 years. and there is lot inexpensive X-10 equipment in circulation. However, mantaining true state of X-10 devices in software has always been challenging and buggy. There are also connectivity issues and endless frustration with getting the X-10 signals especially over powerline to the right devices. There is one area where X-10 shines and that is in RF remotes and sensors, the RF remotes last forever, signal can usually cover most mid-sized houses, repeaters are abundantly available. Their motion sensors have been time tested and battries last for a year or so.
Examples:
- Use inexpensive X-10 rf remotes to control devices
- Use X-10 motion sensors and integrate them to trigger other devices or log the data
RF Antenna (433 Mhz)
\ / \ /
Network - o - - o -
+---------+ +---------+ USB | |
| RPi |-----| RPi [1] |════════╗ | `-- X10 devices (sensors, remotes, ..)
| Pimatic | | Mochad | ║ |
+---------+ +---------+ +-----+
| |
_OR_ | X10 |
| |
+-------------+ USB | |
| RPi Pimatic |═══════════════════| | X10 controllor (CM15A/CM19A/CM15Pro)
| and Mochad | +-----+
+-------------+ |
`----- Powerline ------> X10 devices
(switches, dimmers, blinds, ..)
[1] Or even OpenWrt (, etc) running Mochad
Under "plugins" add:
{
"plugin": "mochad-simple",
"host": "192.168.1.11",
"port": 1099
}
This plugin has two devices
- MochadSimpleController - used to recieve X10 commands
- MochadSimpleSwitch - used to send on/off commands to X10 switches and dimmers
Add them under the devices section -
{
"id": "CM15Pro",
"name": "CM15Pro",
"class": "MochadSimpleController"
},
{
"id": "router",
"class": "MochadSimpleSwitch",
"name": "Den Light",
"housecode": "A", - X10 house code [A-P]
"unitcode": 1, - X10 unit code [1-16]
"protocol": "rf" - X10 protocol rf/pl
}
The MochadSimpleController device is used to recieve X10 commands - this device exposes attribute 'lastX10Message' which contains the last X10 command. This attribute can then be used in rules.
The format of data in 'lastX10Message' attribute is a string:
- Individual units - [housecode][unitcode]-[on/off]
- All lights - [housecode]-[on/off]
"when lastX10Message of CM15Pro equals \"b1-on\" then turn Bedroom Fan on"
"when lastX10Message of CM15Pro equals \"b1-off\" then turn Bedroom Fan off"
"when lastX10Message of CM15Pro equals \"b-off\" then turn All Lights off"
0.6.0
- Added support for security devices (door/windows sensors, security remotes)
- Changed MochadSimpleController to Sensor
###Some interesting lines from mochad logs
Handling all-units-on/off
# example: 05/22 00:34:04 Rx PL House: P Func: All units on
# example: 05/22 00:34:04 Rx PL House: P Func: All units off
# example2: 00:04:29.391 [pimatic-mochad] 09/02 00:04:29 Rx PL House: P Func: All units off
# example2: 00:04:29.391 [pimatic-mochad]>
Handling simple on/off (RF-style)
# 11/30 17:57:12 Tx RF HouseUnit: A10 Func: On
# 11/30 17:57:24 Tx RF HouseUnit: A10 Func: Off
Handling simple on/off (PL-style)
# example: 05/30 20:59:20 Tx PL HouseUnit: P1
# example: 05/30 20:59:20 Tx PL House: P Func: On
# example2: 23:42:03.196 [pimatic-mochad] 09/01 23:42:03 Tx PL HouseUnit: P1
# example2: 23:42:03.196 [pimatic-mochad]>
# example2: 23:42:03.198 [pimatic-mochad] 09/01 23:42:03 Tx PL House: P Func: On
Handling security devices
# example: 07/04 02:07:52 Rx RFSEC Addr: 0xFE Func: Lights_On_SH624
# example: 07/04 02:46:46 07/04 02:46:47 Rx RFSEC Addr: 0xFE Func: Arm_Home_min_SH624
# example: 07/04 02:46:46 07/04 02:46:48 Rx RFSEC Addr: 0xFE Func: Disarm_SH624
# example: 07/04 02:46:46 07/04 02:46:49 Rx RFSEC Addr: 0xFE Func: Arm_Away_min_SH624
# example: 07/04 02:46:46 07/04 02:46:50 Rx RFSEC Addr: 0xFE Func: Disarm_SH624
# example: 07/04 02:46:46 07/04 02:46:51 Rx RFSEC Addr: 0xFE Func: Lights_On_SH624
# example: 07/04 02:46:46 07/04 02:46:52 Rx RFSEC Addr: 0xFE Func: Lights_Off_SH624
This plugin has been derived from pimatic-mochad plugin by Patrick Kuijvenhoven