treesit-fold

Code-folding using treesit

treesit-fold builds on top of treesit.el to provide code folding based on the tree-sitter syntax tree.

Table of Contents

💾 Installation
- 🔍 Method 1. with straight.el and use-package:
- 🔍 Method 2. Manual
🖥 Usage
- 📇 Commands
- 🔨 Supported languages
  - 🚀 Add support for non-ts modes
📝 Customization
- ⚪ Folding on new nodes
  - ❔ Example
  - ↔ Offset
- 🔍 Writing new fold functions
🔌 Plugins
🔰 Contribute
⚜️ License

💾 Installation

🔍 Method 1. with `straight.el` and `use-package`:

(use-package treesit-fold
  :straight (treesit-fold :type git :host github :repo "emacs-tree-sitter/treesit-fold"))

🔍 Method 2. Manual

git clone https://github.com/emacs-tree-sitter/treesit-fold /path/to/lib

then in Emacs:

(add-to-list 'load-path "/path/to/lib")
(require treesit-fold)

or

(use-package treesit-fold
  :load-path "/path/to/lib")

🖥 Usage

📇 Commands

The following are the functions provided by treesit-fold-mode

Commands for enabling treesit-fold:

Commands	Description
`treesit-fold-mode`	enable `treesit-fold-mode` in the current buffer.
`global-treesit-fold-mode`	enable `treesit-fold-mode` whenever tree-sitter is turned on and the major mode is supported by treesit-fold.
`treesit-fold-indicators-mode`	enable `treesit-fold` with indicators in the current buffer. See plugins section.
`global-treesit-fold-indicators-mode`	enable `treesit-fold` with indicators globally. See plugins section.
`treesit-fold-line-comment-mode`	enable line comment folding.

Commands for using treesit-fold.

Commands	Description
`treesit-fold-close`	fold the current syntax node.
`treesit-fold-open`	open the outermost fold of the current syntax node. Keep the sub-folds close.
`treesit-fold-open-recursively`	open all folds inside the current syntax node.
`treesit-fold-close-all`	close all foldable syntax nodes in the current buffer.
`treesit-fold-open-all`	open all folded syntax nodes in the current buffer.
`treesit-fold-toggle`	toggle the syntax node at `point'.

If evil mode is loaded, then these commands are also added to the evil folding list.

🔨 Supported languages

⚠️ Please sort these two lists alphabetically!

These languages are fairly complete:

ActionScript / Arduino / Assembly
Bash / Beancount
C / C++ / C# / Clojure / CMake / CSS
Dart
Elisp / Elixir / Erlang
Fish
GDScript / Gleam / GLSL / Go / Groovy (Jenkinsfile)
Haskell / Haxe / HEEx / HLSL / HTML
Jai / Java / JavaScript / JSX / JSON / Jsonnet / Julia
Kotlin
LaTex / Lisp / Lua
Make / MATLAB / Markdown / Mermaid
Ninja / Nix / Noir
OCaml / Org
Perl / PHP / Python
R / Ruby / Rust / reStructuredText
Scala / Scheme / SQL / Svelte / Swift
TOML / TypeScript / TSX
Verilog / VHDL / Vimscript
XML
YAML
Zig

These languages are in development:

Ada
Agda
Elm
Fortran
Pascal
Smithy

P.S. We don't list trivial languages here. e.g., LLVM IR (.ll) files, etc. Please see the variable treesit-fold-range-alist for the fully supported list!

🚀 Add support for non-ts modes

You can add folding support for non-ts modes (such as c-mode or emacs-lisp-mode), this requires you have the parser library for the mode. After, you can enable folding adding these code snippets to your configuration:

;; For `treesit-parser-create' you need to ensure the language fits with
;; the parser library (e.g `libtree-sitter-cpp.dll' is 'cpp).

(add-hook 'emacs-lisp-mode-hook (lambda () (treesit-parser-create 'elisp)))

;; For use-package users
(use-package treesit-fold
  :hook (c-mode . (lambda () (treesit-parser-create 'c)))
  ...)

📝 Customization

Although treesit-fold aims to have good folding out of the box for all supported definitions, people will indubitably have their own preferences or desired functionality. The following section outlines how to add your own folding definitions and folding functions to make treesit-fold work for you. If there are any improvements you find for existing or new languages, please do raise a PR so that others may benefit from better folding in the future!

⚪ Folding on new nodes

Treesit-fold defines all its folding definitions in the variable treesit-fold-range-alist which is an alist with the key of the alist being the mode and the value being another alist of fold definitions.

;; Example of treesit-fold-range-alist's structure
'((c-mode     . c-folding-definitions) ;; <language>-folding-definitions is structured as shown below
  (css-mode   . css-folding-definitions)
  (go-mode    . go-folding-definitions)
  (scala-mode . scala-folding-definitions)
  ...)

;; Examle of a folding definition alist
(setq css-folding-definitions
    (block   . treesit-fold-range-seq)
    (comment . treesit-fold-range-c-like-comment))

So you can select whatever node that you want to fold on it.

To find what node you'll want to fold closed, refer to the Emacs tree-sitter documentation about viewing nodes. treesit-inspect-mode and treesit-explore-mode are both very useful for this.

For the folding functions, treesit-fold provides some default

treesit-fold-range-seq - Folds from the start of the node to the end of the node leaving a buffer of one character on each side. Usually used for code blocks that have bracketing delimiters.

int main() { // <-- start of tree-sitter block node
    printf("Hello, World\n");
    return 0;
} // <-- end of tree-sitter block node

// |
// | '(block . treesit-fold-range-seq)
// V

int main() {...} // Folded node

treesit-fold-range-markers - Folds the node starting from a giving delimiter character. Useful if tree-sitter's node definition doesn't align with the start of the desired folding section.

NOTE: This folding function requires a lambda (or an externally defined function wrapper) so that the delimiter can be specified. You usually don't need to worry about the node and offset variables, so just pass them through.

type Dog interface {
    Bark() (string, error)
    Beg() (bool, error)
}

/* | Note: The tree-sitter node starts at the word interface, not at the '{'.
 * | '(interface_type . (lambda (node offset)
 * |                      (treesit-fold-range-markers node offset "{" "}")))
 * V
 */

type Dog interface {...}

treesit-fold-range-block-comment - Folds multi-line comments that are of the form /*...*/. Should show a summary if the commentary plugin is turned on.

/*
 * The main function that gets run after program is compiled
 * Doesn't take any parameters
 */
int main() {
    printf("Hello, World\n");
    return 0;
}

// |
// | '(comment . treesit-fold-range-block-comment)
// V

/* <S> The main function that gets run after program is compiled */
int main() {
    printf("Hello, World\n");
    return 0;

treesit-fold-range-line-comment - For languages that have one line comment blocks with the comment delimiter starting each line. Condenses all the comment nodes into a single fold.

Note: This folding function requires a lambda (or an externally defined function wrapper) so that the delimiter can be specified. You usually don't need to worry about the node and offset variables, so just pass them through.
```
# show the long form of ls
# and also display hidden files
alias ll='ls -lah'

# |
# | (comment (lambda (node offset) (treesit-fold-range-line-comment node offset "#"))))
# V

# show the long form of ls...
alias ll='ls -lah'
```

treesit-fold-range-c-like-comment - A shortcut for the large number of languages that have the c style comment structures /*...*/ and // .... Smartly picks the correct folding style for the comment on the line.

/*
 * The main function that gets run after program is compiled
 * Doesn't take any parameters
 */
int main() {
    // print hello world
    // and a new line
    printf("Hello, World\n");
    return 0;
}

// |
// | '(comment . treesit-fold-range-c-like-comment)
// V

/* <S> The main function that gets run after program is compiled */
int main() {
    // <S> print hello world
    printf("Hello, World\n");
    return 0;

Now that you know what kinds of folds are easily available in treesit-fold, you can go ahead and add new fold definitions to treesit-fold-range-alist and be good to go!

❔ Example

Let's look at a quick example of adding a new folding definition. Let's say you want to add folding to go-mode's field_declaration_list. The folding definition that is needed will be '(field_declaration_list . treesit-fold-range-seq). To add this to the treesit-fold-range-alist, you can do something like the following.

(push '(field_declaration_list . treesit-fold-range-seq) (alist-get 'go-mode treesit-fold-range-alist))

Now the new fold definition should be usable by treesit-fold!

↔ Offset

With the functions listed above you'll be able to define most folding behavior that you'll want for most languages. However, sometimes you'll have a language where the delimiter is a word instead of a single character bracket and you want to offset your fold by a certain amount to accommodate it. That's where offsets come in. When adding a fold definition to a a language's fold alist, you can either provide the folding function directly as you've seen so far:

'(block . treesit-fold-range-seq)

Or you can provide the folding function with an offset:

'(block . (treesit-fold-range-seq 1 -3))

When a range is provided, it provides extra room on the ends of a fold. The way this works is most easily shown using an example. Lets say we want to write a fold for bash's for...do...done construct to look something like this:

for i in 1 2 3 4 5
do
   echo "Welcome $i times"
done

# |
# | '(do_group . <some folding function>)
# V

for i in 1 2 3 4 5
do...done

The do...done block is represented in tree-sitter as the node named do_group. However, if we just use '(do_group . treesit-fold-range-seq), then we'll get results like the following:

for i in 1 2 3 4 5
d...e

which is hard to read. Instead, we can use the definition '(do_group . (treesit-fold-range-seq 1 -3)) to offset the fold a bit to get our desired result!

🔍 Writing new fold functions

If the built in functions don't fit your needs, you can write your own fold parser! Folding functions take two parameters:

node - the targeted tree-sitter node; in this example, block will be the targeting node.
offset - (optional) a cons of two integers. This is handy when you have a similar rule with little of positioning adjustment.

Then the function needs to return a position range for the fold overlay in the form '(start-of-fold . end-of-fold). If nil is returned instead of a range, then no fold is created. This can be useful if you want to add extra conditional logic onto your fold.

As an example of a folding function, take a look at the definition of the basic treesit-fold-range-seq.

(defun treesit-fold-range-seq (node offset)
  "..."
  (let ((beg (1+ (treesit-node-start node)))  ; node beginning position
        (end (1- (treesit-node-end node))))   ; node end position
    (treesit-fold--cons-add (cons beg end) offset)))    ; return fold range

🔌 Plugins

treesit-fold comes with a couple of useful little additions that can be used or turned off as desired.

⚖ Indicators Mode

This plugin adds interactive visual markers in the gutter that show where folds can be made. They can be clicked on to fold or unfold given nodes.

💾 Installation

treesit-fold-indicator-mode is loaded when treesit-fold-mode is and the functionality should be auto-loaded in, however if that's not working then you may want to explicitly declare the package in in your config.

use-package

(use-package treesit-fold-indicators
:straight (treesit-fold-indicators :type git :host github :repo "emacs-tree-sitter/treesit-fold"))

(add-to-list 'load-path "/path/to/lib")
(require treesit-fold)

or

(use-package treesit-fold-indicators
   :load-path "/path/to/lib")

🖥 Usage

You can then enable this manually by doing either of the following:

M-x treesit-fold-indicators-mode

M-x global-treesit-fold-indicators-mode

Please note that turning on treesit-fold-indicators-mode automatically turns on treesit-fold-mode as well. Though, turning off treesit-fold-indicators-mode does not turn off treesit-fold-mode

To enable this automatically whenever a buffer has a tree-sitter parser, use the global indicator mode:
```
(global-treesit-fold-indicators-mode 1)
```
Else, you can add a hook directly.
```
(add-hook 'c-ts-mode-hook #'treesit-fold-indicators-mode)
```
To switch to left/right fringe: (Default is left-fringe)
```
(setq treesit-fold-indicators-fringe 'right-fringe)
```
To lower/higher the fringe overlay's priority: (Default is 30)
```
(setq treesit-fold-indicators-priority 30)
```

To apply different faces depending on some conditions: (Default is nil)

For example, to coordinate line-reminder with this plugin.

(setq treesit-fold-indicators-face-function
      (lambda (pos &rest _)
        ;; Return the face of it's function.
        (line-reminder--get-face (line-number-at-pos pos t))))

(setq line-reminder-add-line-function
      (lambda (&rest _)
        (null (treesit-fold--overlays-in treesit-fold-indicators-window (selected-window)
                                    (line-beginning-position) (line-end-position)))))

📝 Summary

This plugin automatically extracts summary from the comment/document string, so you can have a nice way to peek at what's inside the fold range.

🖥 Usage

If you don't want this to happen, do: (Default is t)
```
(setq treesit-fold-summary-show nil)
```
Summary are truncated by length: (Default is 60)
```
(setq treesit-fold-summary-max-length 60)
```
The exceeding string are replace by: (Default is "...")
```
(setq treesit-fold-summary-exceeded-string "...")
```

To change summary format: (Default is " <S> %s ")

(setq treesit-fold-summary-format " <S> %s ")

📝 Customization

Just like with fold definitions, you can create your own summary definitions. Summary definitions are defined in treesit-fold-summary-parsers-alist and has one summary function per major mode '(java-mode . fold-summary-function). The summary function takes in the doc string which is all the text from a doc node and then returns a string to be displayed in its stead. Unlike with the folding functions, there aren't a set of general summary functions to fall back on. However, there are lots of examples and helper functions present in treesit-fold-summary.el. Let's look at one example here.

(defun treesit-fold-summary-javadoc (doc-str)
  "Extract summary from DOC-STR in Javadoc."
  (treesit-fold-summary--generic doc-str "*")) ;; strip the '*' and returns the first line

As can be seen treesit-fold-summary--generic is a very helpful function since it removes the provided delimiter and returns the first line. often this will be enough.

🌫 Line-Comment folding

This plugin makes line comment into foldable range.

🖥 Usage

M-x treesit-fold-line-comment-mode

🔰 Contribute

Ensure your buffer has a tree-sitter parser first, then treesit-explore-mode is useful to test out queries that determine what syntax nodes should be foldable and how to fold them. Emacs repository and Emacs tree-sitter manual has an excellent documentation on how to write tree-sitter queries.

🔬 Development

To run the test locally, you will need the following tools:

Eask
Make (optional)

Install all dependencies and development dependencies:

$ eask install-deps --dev

To test the package's installation:

$ eask package
$ eask install

To test compilation:

$ eask compile

🪧 The following steps are optional, but we recommend you follow these lint results!

The built-in checkdoc linter:

$ eask lint checkdoc

The standard package linter:

$ eask lint package

📝 P.S. For more information, find the Eask manual at https://emacs-eask.github.io/.

❓ How to add a folding parser?

When adding a new folding parser, add the folding definition function to treesit-fold.el itself near where the other range functions live and then add the parser to treesit-fold-parsers.el file. Finally, if you are adding support for a new language, remember to add it to the treesit-fold-range-alist variable.

When creating a new parser, name it treesit-fold-parsers-<language>.

When creating a new folding function, name it treesit-fold-range-<language>-<feature> or something similar.

🔍 Where can I look for tree-sitter node?

Here are some techniques for finding your desired nodes in tree-sitter.

To look for the correct node you have three options:

look at the tree-sitter-[lang]/grammar.js implementation. In the above example, block node is defined in the tree-sitter-c-sharp's grammar.js file.
open a file of your language choice (ensure that it has a tree-sitter parser) in emacs and M-x treesit-explore-mode. This will display a buffer with the whole s-expr representing nodes at point from the current file/buffer.
M-x treesit-inspect-node-at-point in your function to display what your function is seeing.
use M-x treesit-inspect-mode which diplay in the mode-line the current node at point.

Warning

Make sure you look into the correct repository. Some repositories are managed under https://github.com/tree-sitter/[lang].

❓ How to create a summary parser?

treesit-fold-summary.el module is used to extract and display a short description from the comment/docstring.

To create a summary parser, you just have to create a function that could extract comment syntax correctly then register this function to treesit-fold-summary-parsers-alist defined in treesit-fold-summary.el. The display and shortening will be handled by the module itself.

Functions should be named with the prefix treesit-fold-summary- followed by style name. For example, to create a summary parser for Javadoc style, then it should be named treesit-fold-summary-javadoc.

⚜️ License

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

See LICENSE for details.

Name		Name	Last commit message	Last commit date
Latest commit History 438 Commits
.github		.github
_scripts		_scripts
etc		etc
.dir-locals.el		.dir-locals.el
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
Eask		Eask
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
treesit-fold-indicators.el		treesit-fold-indicators.el
treesit-fold-parsers.el		treesit-fold-parsers.el
treesit-fold-summary.el		treesit-fold-summary.el
treesit-fold-util.el		treesit-fold-util.el
treesit-fold.el		treesit-fold.el

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

treesit-fold

💾 Installation

🔍 Method 1. with `straight.el` and `use-package`:

🔍 Method 2. Manual

🖥 Usage

📇 Commands

🔨 Supported languages

🚀 Add support for non-ts modes

📝 Customization

⚪ Folding on new nodes

❔ Example

↔ Offset

🔍 Writing new fold functions

🔌 Plugins

⚖ Indicators Mode

💾 Installation

🖥 Usage

📝 Summary

🖥 Usage

📝 Customization

🌫 Line-Comment folding

🖥 Usage

🔰 Contribute

🔬 Development

❓ How to add a folding parser?

🔍 Where can I look for tree-sitter node?

❓ How to create a summary parser?

⚜️ License

About

Releases 1

Sponsor this project

Packages

Contributors 23

Languages

License

emacs-tree-sitter/treesit-fold

Folders and files

Latest commit

History

Repository files navigation

treesit-fold

💾 Installation

🔍 Method 1. with straight.el and use-package:

🔍 Method 2. Manual

🖥 Usage

📇 Commands

🔨 Supported languages

🚀 Add support for non-ts modes

📝 Customization

⚪ Folding on new nodes

❔ Example

↔ Offset

🔍 Writing new fold functions

🔌 Plugins

⚖ Indicators Mode

💾 Installation

🖥 Usage

📝 Summary

🖥 Usage

📝 Customization

🌫 Line-Comment folding

🖥 Usage

🔰 Contribute

🔬 Development

❓ How to add a folding parser?

🔍 Where can I look for tree-sitter node?

❓ How to create a summary parser?

⚜️ License

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 1

Sponsor this project

Packages 0

Contributors 23

Languages

🔍 Method 1. with `straight.el` and `use-package`:

Packages