ssh-audit

ssh-audit is a tool for ssh server & client configuration auditing.

jtesta/ssh-audit (v2.0+) is the updated and maintained version of ssh-audit forked from arthepsy/ssh-audit (v1.x) due to inactivity.

Features
Usage
Screenshots
Hardening Guides
Pre-Built Packages
Web Front-End
ChangeLog

Features

SSH1 and SSH2 protocol server support;
analyze SSH client configuration;
grab banner, recognize device or software and operating system, detect compression;
gather key-exchange, host-key, encryption and message authentication code algorithms;
output algorithm information (available since, removed/disabled, unsafe/weak/legacy, etc);
output algorithm recommendations (append or remove based on recognized software version);
output security information (related issues, assigned CVE list, etc);
analyze SSH version compatibility based on algorithm information;
historical information from OpenSSH, Dropbear SSH and libssh;
policy scans to ensure adherence to a hardened/standard configuration;
runs on Linux and Windows;
supports Python 3.8 - 3.12;
no dependencies

Usage

usage: ssh-audit.py [options] <host>

   -h,  --help             print this help
   -1,  --ssh1             force ssh version 1 only
   -2,  --ssh2             force ssh version 2 only
   -4,  --ipv4             enable IPv4 (order of precedence)
   -6,  --ipv6             enable IPv6 (order of precedence)
   -b,  --batch            batch output
   -c,  --client-audit     starts a server on port 2222 to audit client
                               software config (use -p to change port;
                               use -t to change timeout)
        --conn-rate-test=N[:max_rate]  perform a connection rate test (useful
                                       for collecting metrics related to
                                       susceptibility of the DHEat vuln).
                                       Testing is conducted with N concurrent
                                       sockets with an optional maximum rate
                                       of connections per second.
   -d,  --debug            Enable debug output.
        --dheat=N[:kex[:e_len]]    continuously perform the DHEat DoS attack
                                   (CVE-2002-20001) against the target using N
                                   concurrent sockets.  Optionally, a specific
                                   key exchange algorithm can be specified
                                   instead of allowing it to be automatically
                                   chosen.  Additionally, a small length of
                                   the fake e value sent to the server can
                                   be chosen for a more efficient attack (such
                                   as 4).
   -g,  --gex-test=<x[,y,...]>  dh gex modulus size test
                   <min1:pref1:max1[,min2:pref2:max2,...]>
                   <x-y[:step]>
   -j,  --json             JSON output (use -jj to enable indents)
   -l,  --level=<level>    minimum output level (info|warn|fail)
   -L,  --list-policies    list all the official, built-in policies. Use with -v
                               to view policy change logs.
        --lookup=<alg1,alg2,...>    looks up an algorithm(s) without
                                    connecting to a server
   -m,  --manual           print the man page (Docker, PyPI, Snap, and Windows
                                    builds only)
   -M,  --make-policy=<policy.txt>  creates a policy based on the target server
                                    (i.e.: the target server has the ideal
                                    configuration that other servers should
                                    adhere to)
   -n,  --no-colors        disable colors
   -p,  --port=<port>      port to connect
   -P,  --policy=<"policy name" | policy.txt>  run a policy test using the
                                                   specified policy
        --skip-rate-test   skip the connection rate test during standard audits
                               (used to safely infer whether the DHEat attack
                               is viable)
   -t,  --timeout=<secs>   timeout (in seconds) for connection and reading
                               (default: 5)
   -T,  --targets=<hosts.txt>  a file containing a list of target hosts (one
                                   per line, format HOST[:PORT])
        --threads=<threads>    number of threads to use when scanning multiple
                                   targets (-T/--targets) (default: 32)
   -v,  --verbose          verbose output

if both IPv4 and IPv6 are used, order of precedence can be set by using either -46 or -64.
batch flag -b will output sections without header and without empty lines (implies verbose flag).
verbose flag -v will prefix each line with section type and algorithm name.
an exit code of 0 is returned when all algorithms are considered secure (for a standard audit), or when a policy check passes (for a policy audit).

Basic server auditing:

ssh-audit localhost
ssh-audit 127.0.0.1
ssh-audit 127.0.0.1:222
ssh-audit ::1
ssh-audit [::1]:222

To run a standard audit against many servers (place targets into servers.txt, one on each line in the format of HOST[:PORT]):

ssh-audit -T servers.txt

To audit a client configuration (listens on port 2222 by default; connect using ssh -p 2222 anything@localhost):

ssh-audit -c

To audit a client configuration, with a listener on port 4567:

ssh-audit -c -p 4567

To list all official built-in policies (hint: use resulting policy names with -P/--policy):

ssh-audit -L

To run a policy audit against a server:

ssh-audit -P ["policy name" | path/to/server_policy.txt] targetserver

To run a policy audit against a client:

ssh-audit -c -P ["policy name" | path/to/client_policy.txt]

To run a policy audit against many servers:

ssh-audit -T servers.txt -P ["policy name" | path/to/server_policy.txt]

To create a policy based on a target server (which can be manually edited):

ssh-audit -M new_policy.txt targetserver

To run the DHEat CPU exhaustion DoS attack (CVE-2002-20001) against a target using 10 concurrent sockets:

ssh-audit --dheat=10 targetserver

To run the DHEat attack using the diffie-hellman-group-exchange-sha256 key exchange algorithm:

ssh-audit --dheat=10:diffie-hellman-group-exchange-sha256 targetserver

To run the DHEat attack using the diffie-hellman-group-exchange-sha256 key exchange algorithm along with very small but non-standard packet lengths (this may result in the same CPU exhaustion, but with many less bytes per second being sent):

ssh-audit --dheat=10:diffie-hellman-group-exchange-sha256:4 targetserver

Screenshots

Server Standard Audit Example

Below is a screen shot of the standard server-auditing output when connecting to an unhardened OpenSSH v5.3 service:

Server Policy Audit Example

Below is a screen shot of the policy auditing output when connecting to an un-hardened Ubuntu Server 20.04 machine (hint: use -L/--list-policies to see names of built-in policies to use with -P/--policy):

After applying the steps in the hardening guide (see below), the output changes to the following:

Client Standard Audit Example

Below is a screen shot of the client-auditing output when an unhardened OpenSSH v7.2 client connects:

Hardening Guides

Guides to harden server & client configuration can be found here: https://www.ssh-audit.com/hardening_guides.html

Pre-Built Packages

Pre-built packages are available for Windows (see the Releases page), PyPI, Snap, and Docker:

To install from PyPI:

$ pip3 install ssh-audit

To install the Snap package:

$ snap install ssh-audit

To install from Dockerhub:

$ docker pull positronsecurity/ssh-audit

(Then run with: docker run -it --rm -p 2222:2222 positronsecurity/ssh-audit 10.1.1.1)

The status of various other platform packages can be found below (via Repology):

Web Front-End

For convenience, a web front-end on top of the command-line tool is available at https://www.ssh-audit.com/.

ChangeLog

v3.3.0-dev (???)

Added built-in policies for Ubuntu 24.04 LTS server and client, and OpenSSH 9.8.
Added IPv6 support for DHEat and connection rate tests.
Added TCP port information to JSON policy scan results; credit Fabian Malte Kopp.
Added LANcom LCOS server recognition and Ed448 key extraction; credit Daniel Lenski.
Fixed crash when running with -P and -T options simultaneously.
Fixed host key tests from only reporting a key type at most once despite multiple hosts supporting it; credit Daniel Lenski.

v3.2.0 (2024-04-22)

Added implementation of the DHEat denial-of-service attack (see --dheat option; CVE-2002-20001).
Expanded filter of CBC ciphers to flag for the Terrapin vulnerability. It now includes more rarely found ciphers.
Fixed parsing of ecdsa-sha2-nistp* CA signatures on host keys. Additionally, they are now flagged as potentially back-doored, just as standard host keys are.
Gracefully handle rare exceptions (i.e.: crashes) while performing GEX tests.
The built-in man page (-m, --manual) is now available on Docker, PyPI, and Snap builds, in addition to the Windows build.
Snap builds are now architecture-independent.
Changed Docker base image from python:3-slim to python:3-alpine, resulting in a 59% reduction in image size; credit Daniel Thamdrup.
Added built-in policies for Amazon Linux 2023, Debian 12, OpenSSH 9.7, and Rocky Linux 9.
Built-in policies now include a change log (use -L -v to view them).
Custom policies now support the allow_algorithm_subset_and_reordering directive to allow targets to pass with a subset and/or re-ordered list of host keys, kex, ciphers, and MACs. This allows for the creation of a baseline policy where targets can optionally implement stricter controls; partial credit yannik1015.
Custom policies now support the allow_larger_keys directive to allow targets to pass with larger host keys, CA keys, and Diffie-Hellman keys. This allows for the creation of a baseline policy where targets can optionally implement stricter controls; partial credit Damian Szuberski.
Color output is disabled if the NO_COLOR environment variable is set (see https://no-color.org/).
Added 1 new key exchange algorithm: gss-nistp384-sha384-*.
Added 1 new cipher: [email protected].

v3.1.0 (2023-12-20)

Added test for the Terrapin message prefix truncation vulnerability (CVE-2023-48795).
Dropped support for Python 3.7 (EOL was reached in June 2023).
Added Python 3.12 support.
In server policies, reduced expected DH modulus sizes from 4096 to 3072 to match the online hardening guides (note that 3072-bit moduli provide the equivalent of 128-bit symmetric security).
In Ubuntu 22.04 client policy, moved host key types [email protected] and ssh-ed25519 to the end of all certificate types.
Updated Ubuntu Server & Client policies for 20.04 and 22.04 to account for key exchange list changes due to Terrapin vulnerability patches.
Re-organized option host key types for OpenSSH 9.2 server policy to correspond with updated Debian 12 hardening guide.
Added built-in policies for OpenSSH 9.5 and 9.6.
Added an additional_notes field to the JSON output.

v3.0.0 (2023-09-07)

Results from concurrent scans against multiple hosts are no longer improperly combined; bug discovered by Adam Russell.
Hostname resolution failure no longer causes scans against multiple hosts to terminate unexpectedly; credit Dani Cuesta.
Algorithm recommendations resulting from warnings are now printed in yellow instead of red; credit Adam Russell.
Added failure, warning, and info notes to JSON output (note that this results in a breaking change to the banner protocol, "enc", and "mac" fields); credit Bareq Al-Azzawi.
Docker Makefile now creates multi-arch builds for amd64, arm64, and armv7; credit Sebastian Cohnen.
Fixed crash during GEX tests.
Refined GEX testing against OpenSSH servers: when the fallback mechanism is suspected of being triggered, perform an additional test to obtain more accurate results.
The color of all notes will be printed in green when the related algorithm is rated good.
Prioritized host key certificate algorithms for Ubuntu 22.04 LTS client policy.
Marked all NIST K-, B-, and T-curves as unproven since they are so rarely used.
Added built-in policy for OpenSSH 9.4.
Added 12 new host keys: ecdsa-sha2-curve25519, ecdsa-sha2-nistb233, ecdsa-sha2-nistb409, ecdsa-sha2-nistk163, ecdsa-sha2-nistk233, ecdsa-sha2-nistk283, ecdsa-sha2-nistk409, ecdsa-sha2-nistp224, ecdsa-sha2-nistp192, ecdsa-sha2-nistt571, ssh-dsa, x509v3-sign-rsa-sha256.
Added 15 new key exchanges: [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], kexAlgoDH14SHA1, kexAlgoDH1SHA1, kexAlgoECDH256, kexAlgoECDH384, kexAlgoECDH521, sm2kep-sha2-nistp256, [email protected], [email protected].
Added 8 new ciphers: [email protected], cast128-12-cbc, cast128-12-cfb, cast128-12-ecb, cast128-12-ofb, des-cfb, des-ecb, des-ofb.
Added 14 new MACs: cbcmac-3des, cbcmac-aes, cbcmac-blowfish, cbcmac-des, cbcmac-rijndael, cbcmac-twofish, hmac-sha256-96, md5, md5-8, ripemd160, ripemd160-8, sha1, sha1-8, umac-128.

v2.9.0 (2023-04-29)

Dropped support for Python 3.6, as it reached EOL at the end of 2021.
Added Ubuntu Server & Client 22.04 hardening policies.
Removed experimental warning tag from [email protected].
Updated CVE database; credit Alexandre Zanni.
Added -g and --gex-test for granular GEX modulus size tests; credit Adam Russell.
Snap packages now print more user-friendly error messages when permission errors are encountered.
JSON 'target' field now always includes port number; credit tomatohater1337.
JSON output now includes recommendations and CVE data.
Mixed host key/CA key types (i.e.: RSA host keys signed with ED25519 CAs, etc.) are now properly handled.
Warnings are now printed for 2048-bit moduli; partial credit Adam Russell.
SHA-1 algorithms now cause failures.
CBC mode ciphers are now warnings instead of failures.
Generic failure/warning messages replaced with more specific reasons (i.e.: 'using weak cipher' => 'using broken RC4 cipher').
Updated built-in policies to include missing host key size information.
Added built-in policies for OpenSSH 8.8, 8.9, 9.0, 9.1, 9.2, and 9.3.
Added 33 new host keys: [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], null, pgp-sign-dss, pgp-sign-rsa, spki-sign-dss, spki-sign-rsa, [email protected], [email protected], [email protected], [email protected], [email protected], ssh-rsa-sha2-256, ssh-rsa-sha2-512, [email protected], [email protected], [email protected], [email protected], [email protected], x509v3-ecdsa-sha2-1.3.132.0.10, x509v3-sign-dss-sha1, [email protected], [email protected], [email protected], [email protected], x509v3-sign-rsa-sha1, [email protected], [email protected], [email protected].
Added 46 new key exchanges: [email protected], diffie-hellman_group17-sha512, [email protected], [email protected], ecdh-sha2-1.2.840.10045.3.1.1, ecdh-sha2-1.2.840.10045.3.1.7, ecdh-sha2-1.3.132.0.1, ecdh-sha2-1.3.132.0.16, ecdh-sha2-1.3.132.0.26, ecdh-sha2-1.3.132.0.27, ecdh-sha2-1.3.132.0.33, ecdh-sha2-1.3.132.0.34, ecdh-sha2-1.3.132.0.35, ecdh-sha2-1.3.132.0.36, ecdh-sha2-1.3.132.0.37, ecdh-sha2-1.3.132.0.38, ecdh-sha2-4MHB+NBt3AlaSRQ7MnB4cg==, ecdh-sha2-5pPrSUQtIaTjUSt5VZNBjg==, ecdh-sha2-9UzNcgwTlEnSCECZa7V1mw==, ecdh-sha2-D3FefCjYoJ/kfXgAyLddYA==, ecdh-sha2-h/SsxnLCtRBh7I9ATyeB3A==, ecdh-sha2-m/FtSAmrV4j/Wy6RVUaK7A==, ecdh-sha2-mNVwCXAoS1HGmHpLvBC94w==, ecdh-sha2-qCbG5Cn/jjsZ7nBeR7EnOA==, ecdh-sha2-qcFQaMAMGhTziMT0z+Tuzw==, ecdh-sha2-VqBg4QRPjxx1EXZdV0GdWQ==, ecdh-sha2-wiRIU8TKjMZ418sMqlqtvQ==, ecdh-sha2-zD/b3hu/71952ArpUG4OjQ==, ecmqv-sha2, gss-13.3.132.0.10-sha256-*, gss-curve25519-sha256-*, gss-curve448-sha512-*, gss-gex-sha1-*, gss-gex-sha256-*, gss-group14-sha1-*, gss-group14-sha256-*, gss-group15-sha512-*, gss-group16-sha512-*, gss-group17-sha512-*, gss-group18-sha512-*, gss-group1-sha1-*, gss-nistp256-sha256-*, gss-nistp384-sha256-*, gss-nistp521-sha512-*, [email protected], [email protected].
Added 28 new ciphers: 3des-cfb, 3des-ecb, 3des-ofb, blowfish-cfb, blowfish-ecb, blowfish-ofb, [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], cast128-cfb, cast128-ecb, cast128-ofb, [email protected], idea-cfb, idea-ecb, idea-ofb, [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], twofish-cfb, twofish-ecb, twofish-ofb
Added 5 new MACs: [email protected], [email protected], [email protected], [email protected], hmac-whirlpool.

v2.5.0 (2021-08-26)

Fixed crash when running host key tests.
Handles server connection failures more gracefully.
Now prints JSON with indents when -jj is used (useful for debugging).
Added MD5 fingerprints to verbose output.
Added -d/--debug option for getting debugging output; credit Adam Russell.
Updated JSON output to include MD5 fingerprints. Note that this results in a breaking change in the 'fingerprints' dictionary format.
Updated OpenSSH 8.1 (and earlier) policies to include rsa-sha2-512 and rsa-sha2-256.
Added OpenSSH v8.6 & v8.7 policies.
Added 3 new key exchanges: gss-gex-sha1-eipGX3TCiQSrx573bT1o1Q==, gss-group1-sha1-eipGX3TCiQSrx573bT1o1Q==, and gss-group14-sha1-eipGX3TCiQSrx573bT1o1Q==.
Added 3 new MACs: hmac-ripemd160-96, AEAD_AES_128_GCM, and AEAD_AES_256_GCM.

v2.4.0 (2021-02-23)

Added multi-threaded scanning support.
Added built-in Windows manual page (see -m/--manual); credit Adam Russell.
Added version check for OpenSSH user enumeration (CVE-2018-15473).
Added deprecation note to host key types based on SHA-1.
Added extra warnings for SSHv1.
Added built-in hardened OpenSSH v8.5 policy.
Upgraded warnings to failures for host key types based on SHA-1.
Fixed crash when receiving unexpected response during host key test.
Fixed hang against older Cisco devices during host key test & gex test.
Fixed improper termination while scanning multiple targets when one target returns an error.
Dropped support for Python 3.5 (which reached EOL in Sept. 2020).
Added 1 new key exchange: [email protected].

v2.3.1 (2020-10-28)

Now parses public key sizes for [email protected] and [email protected] host key types.
Flag [email protected] as a failure due to SHA-1 hash.
Fixed bug in recommendation output which suppressed some algorithms inappropriately.
Built-in policies now include CA key requirements (if certificates are in use).
Lookup function (--lookup) now performs case-insensitive lookups of similar algorithms; credit Adam Russell.
Migrated pre-made policies from external files to internal database.
Split single 3,500 line script into many files (by class).
Added setup.py support; credit Ganden Schaffner.
Added 1 new cipher: [email protected].

v2.3.0 (2020-09-27)

Added new policy auditing functionality to test adherence to a hardening guide/standard configuration (see -L/--list-policies, -M/--make-policy and -P/--policy). For an in-depth tutorial, see https://www.positronsecurity.com/blog/2020-09-27-ssh-policy-configuration-checks-with-ssh-audit/.
Created new man page (see ssh-audit.1 file).
1024-bit moduli upgraded from warnings to failures.
Many Python 2 code clean-ups, testing framework improvements, pylint & flake8 fixes, and mypy type comments; credit Jürgen Gmach.
Added feature to look up algorithms in internal database (see --lookup); credit Adam Russell.
Suppress recommendation of token host key types.
Added check for use-after-free vulnerability in PuTTY v0.73.
Added 11 new host key types: ssh-rsa1, [email protected], ssh-gost2001, ssh-gost2012-256, ssh-gost2012-512, spki-sign-rsa, ssh-ed448, x509v3-ecdsa-sha2-nistp256, x509v3-ecdsa-sha2-nistp384, x509v3-ecdsa-sha2-nistp521, x509v3-rsa2048-sha256.
Added 8 new key exchanges: diffie-hellman-group1-sha256, kexAlgoCurve25519SHA256, Curve25519SHA256, gss-group14-sha256-, gss-group15-sha512-, gss-group16-sha512-, gss-nistp256-sha256-, gss-curve25519-sha256-.
Added 5 new ciphers: blowfish, AEAD_AES_128_GCM, AEAD_AES_256_GCM, [email protected], [email protected].
Added 3 new MACs: [email protected], hmac-sha3-224, [email protected].

v2.2.0 (2020-03-11)

Marked host key type ssh-rsa as weak due to practical SHA-1 collisions.
Added Windows builds.
Added 10 new host key types: ecdsa-sha2-1.3.132.0.10, x509v3-sign-dss, x509v3-sign-rsa, [email protected], x509v3-ssh-dss, x509v3-ssh-rsa, [email protected], [email protected], [email protected], and [email protected].
Added 18 new key exchanges: [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], ecdh-sha2-curve25519, ecdh-sha2-nistb233, ecdh-sha2-nistb409, ecdh-sha2-nistk163, ecdh-sha2-nistk233, ecdh-sha2-nistk283, ecdh-sha2-nistk409, ecdh-sha2-nistp192, ecdh-sha2-nistp224, ecdh-sha2-nistt571, gss-gex-sha1-, and gss-group1-sha1-.
Added 9 new ciphers: camellia128-cbc, camellia128-ctr, camellia192-cbc, camellia192-ctr, camellia256-cbc, camellia256-ctr, aes128-gcm, aes256-gcm, and chacha20-poly1305.
Added 2 new MACs: aes128-gcm and aes256-gcm.

v2.1.1 (2019-11-26)

Added 2 new host key types: [email protected], [email protected].
Added 2 new ciphers: des, 3des.
Added 3 new PuTTY vulnerabilities.
During client testing, client IP address is now listed in output.

v2.1.0 (2019-11-14)

Added client software auditing functionality (see -c / --client-audit option).
Added JSON output option (see -j / --json option; credit Andreas Jaggi).
Fixed crash while scanning Solaris Sun_SSH.
Added 9 new key exchanges: gss-group1-sha1-toWM5Slw5Ew8Mqkay+al2g==, gss-gex-sha1-toWM5Slw5Ew8Mqkay+al2g==, gss-group14-sha1-, gss-group14-sha1-toWM5Slw5Ew8Mqkay+al2g==, gss-group14-sha256-toWM5Slw5Ew8Mqkay+al2g==, gss-group15-sha512-toWM5Slw5Ew8Mqkay+al2g==, diffie-hellman-group15-sha256, ecdh-sha2-1.3.132.0.10, curve448-sha512.
Added 1 new host key type: ecdsa-sha2-1.3.132.0.10.
Added 4 new ciphers: idea-cbc, serpent128-cbc, serpent192-cbc, serpent256-cbc.
Added 6 new MACs: [email protected], [email protected], hmac-ripemd, [email protected], [email protected], [email protected].

v2.0.0 (2019-08-29)

Forked from https://github.com/arthepsy/ssh-audit (development was stalled, and developer went MIA).
Added RSA host key length test.
Added RSA certificate key length test.
Added Diffie-Hellman modulus size test.
Now outputs host key fingerprints for RSA and ED25519.
Added 5 new key exchanges: [email protected], [email protected], [email protected], diffie-hellman-group16-sha256, diffie-hellman-group17-sha512.
Added 3 new encryption algorithms: des-cbc-ssh1, blowfish-ctr, twofish-ctr.
Added 10 new MACs: hmac-sha2-56, hmac-sha2-224, hmac-sha2-384, hmac-sha3-256, hmac-sha3-384, hmac-sha3-512, hmac-sha256, [email protected], hmac-sha512, [email protected].
Added command line argument (-t / --timeout) for connection & reading timeouts.
Updated CVEs for libssh & Dropbear.

v1.7.0 (2016-10-26)

implement options to allow specify IPv4/IPv6 usage and order of precedence
implement option to specify remote port (old behavior kept for compatibility)
add colors support for Microsoft Windows via optional colorama dependency
fix encoding and decoding issues, add tests, do not crash on encoding errors
use mypy-lang for static type checking and verify all code

v1.6.0 (2016-10-14)

implement algorithm recommendations section (based on recognized software)
implement full libssh support (version history, algorithms, security, etc)
fix SSH-1.99 banner recognition and version comparison functionality
do not output empty algorithms (happens for misconfigured servers)
make consistent output for Python 3.x versions
add a lot more tests (conf, banner, software, SSH1/SSH2, output, etc)
use Travis CI to test for multiple Python versions (2.6-3.5, pypy, pypy3)

v1.5.0 (2016-09-20)

create security section for related security information
match and output assigned CVE list and security issues for Dropbear SSH
implement full SSH1 support with fingerprint information
automatically fallback to SSH1 on protocol mismatch
add new options to force SSH1 or SSH2 (both allowed by default)
parse banner information and convert it to specific software and OS version
do not use padding in batch mode
several fixes (Cisco sshd, rare hangs, error handling, etc)

v1.0.20160902

implement batch output option
implement minimum output level option
fix compatibility with Python 2.6

v1.0.20160812

implement SSH version compatibility feature
fix wrong mac algorithm warning
fix Dropbear SSH version typo
parse pre-banner header
better errors handling

v1.0.20160803

use OpenSSH 7.3 banner
add new key-exchange algorithms

v1.0.20160207

use OpenSSH 7.2 banner
additional warnings for OpenSSH 7.2
fix OpenSSH 7.0 failure messages
add rijndael-cbc failure message from OpenSSH 6.7

v1.0.20160105

multiple additional warnings
support for none algorithm
better compression handling
ensure reading enough data (fixes few Linux SSH)

v1.0.20151230

Dropbear SSH support

v1.0.20151223

initial version

Name		Name	Last commit message	Last commit date
Latest commit History 639 Commits
.github/workflows		.github/workflows
src/ssh_audit		src/ssh_audit
test		test
.dockerignore		.dockerignore
.gitignore		.gitignore
CONTRIBUTING.md		CONTRIBUTING.md
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile.docker		Makefile.docker
Makefile.pypi		Makefile.pypi
PACKAGING.md		PACKAGING.md
README.md		README.md
add_builtin_man_page.sh		add_builtin_man_page.sh
build_snap.sh		build_snap.sh
build_windows_executable.sh		build_windows_executable.sh
docker_test.sh		docker_test.sh
pyproject.toml		pyproject.toml
setup.cfg		setup.cfg
setup.py		setup.py
snapcraft.yaml		snapcraft.yaml
ssh-audit.1		ssh-audit.1
ssh-audit.py		ssh-audit.py
tox.ini		tox.ini
windows_icon.ico		windows_icon.ico

License

dlenskiSB/ssh-audit

Folders and files

Latest commit

History

Repository files navigation