Skip to content

dgorohov/LilyPad_MP3_Player

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

The LilyPad MP3 Player is an amazing little board that contains everything you need to play almost any audio file you wish. You can use it to create MP3-playing hoodies, talking teddy bears, or anything else your imagination can come up with!

Installation:

You should install the latest version of the Arduino IDE, available at http://www.arduino.cc.

This software requires several nonstandard libraries:
	SdFat (by William Greiman)
	SFEMP3Shield (by Bill Porter)
	pinChangeInt (by Lex Talionis)
	
	The current version of these libraries as of this date are included in this archive.

TL;DR: The one-step procedure is to drag the contents of the Arduino folder to your personal Arduino sketch folder. This will create a "libraries" folder (containing support libraries), and a "LilyPad MP3 Player" folder (containing example sketches).

To install the libraries manually, copy the "libraries" folder to your personal Arduino sketch directory. (If there is already a "libraries" folder there, go ahead and add the included libraries to it.) You'll need to restart the Arduino IDE to get it to recognize the new libraries.

To install the example sketches, copy the "LilyPad MP3 Player" folder to your personal Arduino sketch folder.

Loading the sketches:

To load a sketch onto the LilyPad MP3 Player:

1. Connect the LilyPad MP3 Player to your computer using a 5V FTDI board or cable (available at http://www.sparkfun.com). Turn the LilyPad MP3 Player ON. The red LED should light up. Note that a Lipo battery or external power source is required to run the LilyPad MP3 Player.

2. Start the Arduino IDE.

3. Select the correct board type from the menu: Tools / Board / "Arduino Pro or Pro Mini (3.3V, 8MHz) w/ATmega328"

4. Select the correct serial port from the menu: Tools / Serial Port / (the port that your FTDI board or cable has created, usually the highest number)

5. Load the desired sketch into the Arduino IDE.

6. Click on the Upload (right arrow) button at the top of the window. The code should compile then upload to the LilyPad MP3 Player. If you have errors, double-check that you installed the required libraries to the correct place, and restarted the Arduino IDE.

See the tutorials at www.sparkfun.com for more information on using and hacking the LilyPad MP3 Player.

About

Example code and board files for the LilyPad MP3 Player

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Eagle 59.2%
  • C++ 23.8%
  • Other 11.8%
  • C 3.7%
  • Processing 1.5%