DLPX-91747 Merge conflict in linux-kernel-generic #36
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit b0af4bc ] When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. Provide wrapper functions for spin_[un]lock*(port->lock) invocations so that the console mechanics can be applied later on at a single place and does not require to copy the same logic all over the drivers. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: John Ogness <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 54c4ec5 ("serial: mxs-auart: add spinlock around changing cts state") Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 54c4ec5 ] The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: [email protected] Fixes: 4d90bb1 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <[email protected]> Signed-off-by: Emil Kronborg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 95a77b6 ] drm_print defines all of these: drm_dbg_{core,kms,prime,atomic,vbl,lease,_dp,_drmres} but not drm_dbg_driver itself, since it was the original drm_dbg. To improve namespace symmetry, change the drm_dbg defn to drm_dbg_driver, and redef grandfathered name to symmetric one. This will help with nouveau, which uses its own stack of macros to construct calls to dev_info, dev_dbg, etc, for which adaptation means drm_dbg_##driver constructs. Signed-off-by: Jim Cromie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: a60ccad ("drm/vmwgfx: Fix crtc's atomic check conditional") Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit a60ccad ] The conditional was supposed to prevent enabling of a crtc state without a set primary plane. Accidently it also prevented disabling crtc state with a set primary plane. Neither is correct. Fix the conditional and just driver-warn when a crtc state has been enabled without a primary plane which will help debug broken userspace. Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests. Signed-off-by: Zack Rusin <[email protected]> Fixes: 06ec419 ("drm/vmwgfx: Add and connect CRTC helper functions") Cc: Broadcom internal kernel review list <[email protected]> Cc: [email protected] Cc: <[email protected]> # v4.12+ Reviewed-by: Ian Forbes <[email protected]> Reviewed-by: Martin Krastev <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 This reverts commit a6fec6324f518991d63360693224b42e0ea3144f which is commit 27016f7 upstream. It is reported to cause problems in older kernels due to some crypto drivers having the same name, so revert it here to fix the problems. Link: https://lore.kernel.org/r/[email protected] Reported-by: Guenter Roeck <[email protected]> Cc: Ovidiu Panait <[email protected]> Cc: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 8f5100d upstream. Fix a cmd->ent use after free due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process allocated a ent->idx but didn't set ent to cmd->ent_arr in cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into the spin lock. [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 [70013.081968] [70013.082028] Workqueue: events aer_isr [70013.082053] Call Trace: [70013.082067] dump_stack+0x8b/0xbb [70013.082086] print_address_description+0x6a/0x270 [70013.082102] kasan_report+0x179/0x2c0 [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] [70013.082409] pci_device_remove+0xf3/0x280 [70013.082439] device_release_driver_internal+0x1c3/0x470 [70013.082453] pci_stop_bus_device+0x109/0x160 [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 [70013.082485] pcie_do_fatal_recovery+0x167/0x550 [70013.082493] aer_isr+0x7d2/0x960 [70013.082543] process_one_work+0x65f/0x12d0 [70013.082556] worker_thread+0x87/0xb50 [70013.082571] kthread+0x2e9/0x3a0 [70013.082592] ret_from_fork+0x1f/0x40 The logical relationship of this error is as follows: aer_recover_work | ent->work -------------------------------------------+------------------------------ aer_recover_work_func | |- pcie_do_recovery | |- report_error_detected | |- mlx5_pci_err_detected |cmd_work_handler |- mlx5_enter_error_state | |- cmd_alloc_index |- enter_error_state | |- lock cmd->alloc_lock |- mlx5_cmd_flush | |- clear_bit |- mlx5_cmd_trigger_completions| |- unlock cmd->alloc_lock |- lock cmd->alloc_lock | |- vector = ~dev->cmd.vars.bitmask |- for_each_set_bit | |- cmd_ent_get(cmd->ent_arr[i]) (UAF) |- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx]=ent The cmd->ent_arr[ent->idx] assignment and the bit clearing are not protected by the cmd->alloc_lock in cmd_work_handler(). Fixes: 50b2412 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Samasth Norway Ananda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit a90afe8 upstream. If the perf buffer isn't large enough, provide a hint about how large it needs to be for whatever is running. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Robin H. Johnson <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
…together BugLink: https://bugs.launchpad.net/bugs/2067974 commit e531e90 upstream. Running endpoint security solutions like Sentinel1 that use perf-based tracing heavily lead to this repeated dump complaining about dockerd. The default value of 2048 is nowhere near not large enough. Using the prior patch "tracing: show size of requested buffer", we get "perf buffer not large enough, wanted 6644, have 6144", after repeated up-sizing (I did 2/4/6/8K). With 8K, the problem doesn't occur at all, so below is the trace for 6K. I'm wondering if this value should be selectable at boot time, but this is a good starting point. ``` ------------[ cut here ]------------ perf buffer not large enough, wanted 6644, have 6144 WARNING: CPU: 1 PID: 4997 at kernel/trace/trace_event_perf.c:402 perf_trace_buf_alloc+0x8c/0xa0 Modules linked in: [..] CPU: 1 PID: 4997 Comm: sh Tainted: G T 5.13.13-x86_64-00039-gb3959163488e #63 Hardware name: LENOVO 20KH002JUS/20KH002JUS, BIOS N23ET66W (1.41 ) 09/02/2019 RIP: 0010:perf_trace_buf_alloc+0x8c/0xa0 Code: 80 3d 43 97 d0 01 00 74 07 31 c0 5b 5d 41 5c c3 ba 00 18 00 00 89 ee 48 c7 c7 00 82 7d 91 c6 05 25 97 d0 01 01 e8 22 ee bc 00 <0f> 0b 31 c0 eb db 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 55 89 RSP: 0018:ffffb922026b7d58 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9da5ee012000 RCX: 0000000000000027 RDX: ffff9da881657828 RSI: 0000000000000001 RDI: ffff9da881657820 RBP: 00000000000019f4 R08: 0000000000000000 R09: ffffb922026b7b80 R10: ffffb922026b7b78 R11: ffffffff91dda688 R12: 000000000000000f R13: ffff9da5ee012108 R14: ffff9da8816570a0 R15: ffffb922026b7e30 FS: 00007f420db1a080(0000) GS:ffff9da881640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 00000002504a8006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kprobe_perf_func+0x11e/0x270 ? do_execveat_common.isra.0+0x1/0x1c0 ? do_execveat_common.isra.0+0x5/0x1c0 kprobe_ftrace_handler+0x10e/0x1d0 0xffffffffc03aa0c8 ? do_execveat_common.isra.0+0x1/0x1c0 do_execveat_common.isra.0+0x5/0x1c0 __x64_sys_execve+0x33/0x40 do_syscall_64+0x6b/0xc0 ? do_syscall_64+0x11/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f420dc1db37 Code: ff ff 76 e7 f7 d8 64 41 89 00 eb df 0f 1f 80 00 00 00 00 f7 d8 64 41 89 00 eb dc 0f 1f 84 00 00 00 00 00 b8 3b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 01 43 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd4e8b4e38 EFLAGS: 00000246 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f420dc1db37 RDX: 0000564338d1e740 RSI: 0000564338d32d50 RDI: 0000564338d28f00 RBP: 0000564338d28f00 R08: 0000564338d32d50 R09: 0000000000000020 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000564338d28f00 R13: 0000564338d32d50 R14: 0000564338d1e740 R15: 0000564338d28c60 ---[ end trace 83ab3e8e16275e49 ]--- ``` Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Robin H. Johnson <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit b53c6bd upstream. cpu_feature_enabled(X86_FEATURE_OSPKE) does not necessarily reflect whether CR4.PKE is set on the CPU. In particular, they may differ on non-BSP CPUs before setup_pku() is executed. In this scenario, RDPKRU will #UD causing the system to hang. Fix by checking CR4 for PKE enablement which is always correct for the current CPU. The scenario happens by inserting a WARN* before setup_pku() in identiy_cpu() or some other diagnostic which would lead to calling __show_regs(). [ bp: Massage commit message. ] Signed-off-by: David Kaplan <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 9bf4e91 upstream. After an innocuous optimization change in LLVM main (19.0.0), x86_64 allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to build due to the checks in check_copy_size(): In file included from net/bluetooth/sco.c:27: In file included from include/linux/module.h:13: In file included from include/linux/stat.h:19: In file included from include/linux/time.h:60: In file included from include/linux/time32.h:13: In file included from include/linux/timex.h:67: In file included from arch/x86/include/asm/timex.h:6: In file included from arch/x86/include/asm/tsc.h:10: In file included from arch/x86/include/asm/msr.h:15: In file included from include/linux/percpu.h:7: In file included from include/linux/smp.h:118: include/linux/thread_info.h:244:4: error: call to '__bad_copy_from' declared with 'error' attribute: copy source size is too small 244 | __bad_copy_from(); | ^ The same exact error occurs in l2cap_sock.c. The copy_to_user() statements that are failing come from l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This does not occur with GCC with or without KCSAN or Clang without KCSAN enabled. len is defined as an 'int' because it is assigned from '__user int *optlen'. However, it is clamped against the result of sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit platforms). This is done with min_t() because min() requires compatible types, which results in both len and the result of sizeof() being casted to 'unsigned int', meaning len changes signs and the result of sizeof() is truncated. From there, len is passed to copy_to_user(), which has a third parameter type of 'unsigned long', so it is widened and changes signs again. This excessive casting in combination with the KCSAN instrumentation causes LLVM to fail to eliminate the __bad_copy_from() call, failing the build. The official recommendation from LLVM developers is to consistently use long types for all size variables to avoid the unnecessary casting in the first place. Change the type of len to size_t in both l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears up the error while allowing min_t() to be replaced with min(), resulting in simpler code with no casts and fewer implicit conversions. While len is a different type than optlen now, it should result in no functional change because the result of sizeof() will clamp all values of optlen in the same manner as before. Cc: [email protected] Closes: ClangBuiltLinux/linux#2007 Link: llvm/llvm-project#85647 Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Justin Stitt <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit d1a5a7e upstream. Add the support ID(0x0bda, 0x4853) to usb_device_id table for Realtek RTL8852BE. Without this change the device utilizes an obsolete version of the firmware that is encoded in it rather than the updated Realtek firmware and config files from the firmware directory. The latter files implement many new features. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: [email protected] Signed-off-by: Larry Finger <[email protected]> Signed-off-by: WangYuli <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 73e87c0 upstream. Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time. Fixes: c1a7416 ("Bluetooth: hci_qca: Add device_may_wakeup support") Cc: [email protected] # 5.13 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit f8def10 upstream. Generic sdhci code registers LED device and uses host->runtime_suspended flag to protect access to it. The sdhci-msm driver doesn't set this flag, which causes a crash when LED is accessed while controller is runtime suspended. Fix this by setting the flag correctly. Cc: [email protected] Fixes: 67e6db1 ("mmc: sdhci-msm: Add pm_runtime and system PM support") Signed-off-by: Mantas Pucka <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 2f7ef5b upstream. Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation. CC: [email protected] # 4.14+ Reported-by: <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit fe42754 upstream. Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. Fixes: f337a6a ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n") Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au Reported-by: Stephen Rothwell <[email protected]> Reported-by: Michael Ellerman <[email protected]> Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Acked-by: Borislav Petkov (AMD) <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 SPECULATION_MITIGATIONS has been split into ARCH_CONFIGURES_CPU_MITIGATIONS and CPU_MITIGATIONS. Update configs accordingly. Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
…Puma BugLink: https://bugs.launchpad.net/bugs/2067974 commit 0ac417b upstream. Q7_THRM# pin is connected to a diode on the module which is used as a level shifter, and the pin have a pull-down enabled by default. We need to configure it to internal pull-up, other- wise whenever the pin is configured as INPUT and we try to control it externally the value will always remain zero. Signed-off-by: Iskander Amara <[email protected]> Fixes: 2c66fc3 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Reviewed-by: Quentin Schulz <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 9792b7c upstream. This avoids a potential conflict with firmwares with the newer HDP flush mechanism. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 25e9227 upstream. Free the sync object if the memory allocation fails for any reason. Signed-off-by: Mukul Joshi <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit c26591a upstream. The error handling path in its_vpe_irq_domain_alloc() causes a double free when its_vpe_init() fails after successfully allocating at least one interrupt. This happens because its_vpe_irq_domain_free() frees the interrupts along with the area bitmap and the vprop_page and its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the vprop_page again. Fix this by unconditionally invoking its_vpe_irq_domain_free() which handles all cases correctly and by removing the bitmap/vprop_page freeing from its_vpe_irq_domain_alloc(). [ tglx: Massaged change log ] Fixes: 7d75bbb ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Guanrui Huang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Zenghui Yu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
… not match device address BugLink: https://bugs.launchpad.net/bugs/2067974 commit 6e159fd upstream. Enable reuse of logic in eth_type_trans for determining packet type. Suggested-by: Sabrina Dubroca <[email protected]> Cc: [email protected] Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit e3eb7dd upstream. b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers) unconditionally, but b44::rx_buffers is only valid when the device is up (they get allocated in b44_open(), and deallocated again in b44_close()), any other time these are just a NULL pointers. So if you try to change the pause params while the network interface is disabled/administratively down, everything explodes (which likely netifd tries to do). Link: openwrt/openwrt#13789 Fixes: 1da177e (Linux-2.6.12-rc2) Cc: [email protected] Reported-by: Peter Münster <[email protected]> Suggested-by: Jonas Gorski <[email protected]> Signed-off-by: Vaclav Svoboda <[email protected]> Tested-by: Peter Münster <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Peter Münster <[email protected]> Reviewed-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ #49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/[email protected] Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <[email protected]> Reported-by: Xiubo Li <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: Damien Le Moal <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Suggested-by: Dave Chinner <[email protected]> Tested-by: Xiubo Li <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 21c9fb6 upstream. I ran into a randconfig build failure with UBSAN using gcc-13.2: arm-linux-gnueabi-ld: error: unplaced orphan section `.bss..Lubsan_data31' from `drivers/mtd/nand/raw/diskonchip.o' I'm not entirely sure what is going on here, but I suspect this has something to do with the check for the end of the doc_locations[] array that contains an (unsigned long)0xffffffff element, which is compared against the signed (int)0xffffffff. If this is the case, we should get a runtime check for undefined behavior, but we instead get an unexpected build-time error. I would have expected this to work fine on 32-bit architectures despite the signed integer overflow, though on 64-bit architectures this likely won't ever work. Changing the contition to instead check for the size of the array makes the code safe everywhere and avoids the ubsan check that leads to the link error. The loop code goes back to before 2.6.12. Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 740ea3c upstream. Eric Dumazet reported a use-after-free related to the per-netns ehash series. [0] When we create a TCP socket from userspace, the socket always holds a refcnt of the netns. This guarantees that a reqsk timer is always fired before netns dismantle. Each reqsk has a refcnt of its listener, so the listener is not freed before the reqsk, and the net is not freed before the listener as well. OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt of its netns. Thus, a reqsk timer can be fired after the netns dismantle and access freed per-netns ehash. To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets in inet_twsk_purge() if the netns uses a per-netns ehash. [0]: https://lore.kernel.org/netdev/CANn89iLXMup0dRD_Ov79Xt8N9FM0XdhCHEN05sf3eLwxKweM6w@mail.gmail.com/ BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline] BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913 Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301 CPU: 1 PID: 8301 Comm: syz-executor.2 Not tainted 6.0.0-syzkaller-02757-gaf7d23f9d96a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline] reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913 inet_csk_reqsk_queue_drop net/ipv4/inet_connection_sock.c:927 [inline] inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:939 [inline] reqsk_timer_handler+0x724/0x1160 net/ipv4/inet_connection_sock.c:1053 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1107 </IRQ> Fixes: d1e5e64 ("tcp: Introduce optional per-netns ehash.") Reported-by: syzbot <[email protected]> Reported-by: Eric Dumazet <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> [shaozhengchao: resolved conflicts in 5.15] Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 commit 1c4e97d upstream. inet_twsk_purge() uses rcu to find TIME_WAIT and NEW_SYN_RECV objects to purge. These objects use SLAB_TYPESAFE_BY_RCU semantic and need special care. We need to use refcount_inc_not_zero(&sk->sk_refcnt). Reuse the existing correct logic I wrote for TIME_WAIT, because both structures have common locations for sk_state, sk_family, and netns pointer. If after the refcount_inc_not_zero() the object fields longer match the keys, use sock_gen_put(sk) to release the refcount. Then we can call inet_twsk_deschedule_put() for TIME_WAIT, inet_csk_reqsk_queue_drop_and_put() for NEW_SYN_RECV sockets, with BH disabled. Then we need to restart the loop because we had drop rcu_read_lock(). Fixes: 740ea3c ("tcp: Clean up kernel listener's reqsk in inet_twsk_purge()") Link: https://lore.kernel.org/netdev/CANn89iLvFuuihCtt9PME2uS1WJATnf5fKjDToa1WzVnRzHnPfg@mail.gmail.com/T/#u Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Zhengchao Shao <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 43c633e ] When building with 'make W=1', clang notices that the computed register values are never actually written back but instead the wrong variable is set: drivers/dma/owl-dma.c:244:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable] 244 | u32 regval; | ^ drivers/dma/owl-dma.c:268:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable] 268 | u32 regval; | ^ Change these to what was most likely intended. Fixes: 47e2057 ("dmaengine: Add Actions Semi Owl family S900 DMA driver") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Peter Korsgaard <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 9140ce4 ] When iDMA 64-bit device is powered off, the IRQ status register is all 1:s. This is never happen in real case and signalling that the device is simply powered off. Don't try to serve interrupts that are not ours. Fixes: 667dfed ("dmaengine: add a driver for Intel integrated DMA 64-bit") Reported-by: Heiner Kallweit <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Tested-by: Heiner Kallweit <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit 244296c ] There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] hardirqs last disabled at (64549): [<ffffffc081adf010>] _raw_spin_lock_irqsave+0xc0/0xdc [ 31.085277] softirqs last enabled at (64503): [<ffffffc08001071c>] __do_softirq+0x47c/0x500 [ 31.085390] softirqs last disabled at (64498): [<ffffffc080017134>] ____do_softirq+0x10/0x1c [ 31.085501] ---[ end trace 0000000000000000 ]--- Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2067974 [ Upstream commit f221033 ] During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target. Fixes: 81dd4d4 ("dmaengine: idxd: Add IDXD performance monitor support") Reported-by: Terrence Xu <[email protected]> Tested-by: Terrence Xu <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/1786013 The script is gone now and cranky open will fail. Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2059681 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Roxana Nicolescu <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2061483 Properties: no-test-build Signed-off-by: Roxana Nicolescu <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2061810 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2063633 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Roxana Nicolescu <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2065897 Properties: no-test-build Signed-off-by: Roxana Nicolescu <[email protected]>
Signed-off-by: Roxana Nicolescu <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2068240 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2071602 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
…el-versions (main/2024.06.10) BugLink: https://bugs.launchpad.net/bugs/1786013 Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
mmaybee
approved these changes
Jul 26, 2024
sebroy
approved these changes
Jul 26, 2024
delphix-devops-bot
pushed a commit
that referenced
this pull request
Aug 22, 2024
BugLink: https://bugs.launchpad.net/bugs/2070028 [ Upstream commit adf0398 ] There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Nov 1, 2025
BugLink: https://bugs.launchpad.net/bugs/2120812 [ Upstream commit eedf3e3c2f2af55dca42b0ea81dffb808211d269 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Tamir Duberstein <[email protected]> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Conflicts
Take upstream
Take upstream version of zfs, and remove iwl and v4l2 line
This file was extensively reworked upstream in a37f08b, 43d1d00, c658797, 12ece15 and d66bb42.
Taking the upstream version of all changes.
In DLPX-82827, we bumped NFSD_MAX_OPS_PER_COMPOUND from 16 to 40.
Upstream just bumped it to 50 for the same reason. Take upstream.
Testing Done
http://selfservice.jenkins.delphix.com/job/appliance-build-orchestrator-pre-push/9009/
The ZFS failures were only in zloop, with a checkpoint_after_rewind failure in ZTS. That is an historically flaky test.