Merge tag 'input-for-v6.10-rc5' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - fixes for ili210x and elantech drivers

 - new products IDs added to xpad controller driver

 - a tweak to i8042 driver to always keep keyboard in Ayaneo Kun
   handheld in raw mode

 - populated "id_table" in ads7846 touchscreen driver to make sure
   non-OF instantiated devices can properly determine the model data.

* tag 'input-for-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - use spi_device_id table
  Input: xpad - add support for ASUS ROG RAIKIRI PRO
  Input: ili210x - fix ili251x_read_touch_data() return value
  Input: i8042 - add Ayaneo Kun to i8042 quirk table
  Input: elantech - fix touchpad state on resume for Lenovo N24

drivers/input/joystick/xpad.c

@@ -209,6 +209,7 @@ static const struct xpad_device {
 	{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
 	{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE },
+	{ 0x0b05, 0x1abb, "ASUS ROG RAIKIRI PRO", 0, XTYPE_XBOXONE },
 	{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },

drivers/input/mouse/elantech.c

@@ -1476,16 +1476,47 @@ static void elantech_disconnect(struct psmouse *psmouse)
 	psmouse->private = NULL;
 }
 
+/*
+ * Some hw_version 4 models fail to properly activate absolute mode on
+ * resume without going through disable/enable cycle.
+ */
+static const struct dmi_system_id elantech_needs_reenable[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Lenovo N24 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
+		},
+	},
+#endif
+	{ }
+};
+
 /*
  * Put the touchpad back into absolute mode when reconnecting
  */
 static int elantech_reconnect(struct psmouse *psmouse)
 {
+	int err;
+
 	psmouse_reset(psmouse);
 
 	if (elantech_detect(psmouse, 0))
 		return -1;
 
+	if (dmi_check_system(elantech_needs_reenable)) {
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad back into absolute mode.\n");

drivers/input/serio/i8042-acpipnpio.h

@@ -76,7 +76,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_PROBE_DEFER		BIT(5)
 #define SERIO_QUIRK_RESET_ALWAYS	BIT(6)
 #define SERIO_QUIRK_RESET_NEVER		BIT(7)
-#define SERIO_QUIRK_DIECT		BIT(8)
+#define SERIO_QUIRK_DIRECT		BIT(8)
 #define SERIO_QUIRK_DUMBKBD		BIT(9)
 #define SERIO_QUIRK_NOLOOP		BIT(10)
 #define SERIO_QUIRK_NOTIMEOUT		BIT(11)
@@ -1332,6 +1332,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		/*
+		 * The Ayaneo Kun is a handheld device where some the buttons
+		 * are handled by an AT keyboard. The keyboard is usually
+		 * detected as raw, but sometimes, usually after a cold boot,
+		 * it is detected as translated. Make sure that the keyboard
+		 * is always in raw mode.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_MATCH(DMI_BOARD_NAME, "KUN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DIRECT)
+	},
 	{ }
 };
 
@@ -1655,7 +1669,7 @@ static void __init i8042_check_quirks(void)
 		if (quirks & SERIO_QUIRK_RESET_NEVER)
 			i8042_reset = I8042_RESET_NEVER;
 	}
-	if (quirks & SERIO_QUIRK_DIECT)
+	if (quirks & SERIO_QUIRK_DIRECT)
 		i8042_direct = true;
 	if (quirks & SERIO_QUIRK_DUMBKBD)
 		i8042_dumbkbd = true;

drivers/input/touchscreen/ads7846.c

@@ -1111,6 +1111,16 @@ static const struct of_device_id ads7846_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
 
+static const struct spi_device_id ads7846_spi_ids[] = {
+	{ "tsc2046", 7846 },
+	{ "ads7843", 7843 },
+	{ "ads7845", 7845 },
+	{ "ads7846", 7846 },
+	{ "ads7873", 7873 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, ads7846_spi_ids);
+
 static const struct ads7846_platform_data *ads7846_get_props(struct device *dev)
 {
 	struct ads7846_platform_data *pdata;
@@ -1386,10 +1396,10 @@ static struct spi_driver ads7846_driver = {
 	},
 	.probe		= ads7846_probe,
 	.remove		= ads7846_remove,
+	.id_table	= ads7846_spi_ids,
 };
 
 module_spi_driver(ads7846_driver);
 
 MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:ads7846");

drivers/input/touchscreen/ili210x.c

@@ -261,8 +261,8 @@ static int ili251x_read_touch_data(struct i2c_client *client, u8 *data)
 	if (!error && data[0] == 2) {
 		error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1,
 					ILI251X_DATA_SIZE2);
-		if (error >= 0 && error != ILI251X_DATA_SIZE2)
-			error = -EIO;
+		if (error >= 0)
+			error = error == ILI251X_DATA_SIZE2 ? 0 : -EIO;
 	}
 
 	return error;