TEST: 1.12.x + blas variants by h-vetinari · Pull Request #267 · conda-forge/scipy-feedstock

h-vetinari · 2024-01-23T13:40:40Z

Following the same scheme as #242, #224, #223, #199, #172, #153 & #130.

conda-forge-webservices · 2024-01-23T13:40:48Z

Hi! This is the friendly automated conda-forge-linting service.

I just wanted to let you know that I linted all conda-recipes in your PR (recipe) and found it was in an excellent condition.

isuruf · 2024-01-23T16:20:05Z

@h-vetinari, azure is backed up at the moment. Is it okay to cancel the builds right now and restart a few hours later?

h-vetinari · 2024-01-23T19:55:37Z

@h-vetinari, azure is backed up at the moment. Is it okay to cancel the builds right now and restart a few hours later?

Sorry, I didn't notice that and had started the job just before going to bed. It's nonessential, so please feel free to cancel these if we're ever congested

…nda-forge-pinning 2024.01.23.02.50.07

h-vetinari · 2024-03-18T00:47:58Z

Scipy 1.12.0

TL;DR: Cautiously improving, but OpenBLAS-related problems remain (new ones on windows)

From 45 failures out of 113 runs for 1.11.4, we're now at 35 failures out of 113 CI runs (not counting the failure of test_multiple_ellipsis_slicing absolutely everywhere)

Notable

MKL dropped support for osx; CI still running with last supported version
The curious case of BUG: test failure in test_x0_equals_Mb with bicgstab scipy/scipy#15533 becomes curiouser still

Good News

TST: new errors on linux-{aarch64,ppc64le} related to cdf with fft in TestLevyStable scipy/scipy#19337 has been fixed

Bad News

Complete failure of test_multiple_ellipsis_slicing on all platforms
Many new failures on win+openblas
Apparently emulation-related failures on aarch remain

Restrictions

due to test_multiple_ellipsis_slicing failing everywhere, these 20 tests failures were discounted from the failure matrix
test on aarch64/ppc64le resp. for PyPy only run tests with label='fast', not the full test suite
the following test skips:

# on the slowest agents, these tests take more than 20min in emulation
{% set tests_to_skip = tests_to_skip + " or test_mixed_threads_processes" %}                      # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (test_lsq_linear and test_large_rank_deficient)" %}   # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (test_iterative and test_precond_inverse[case1])" %}  # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (test_multiprocess and fft)" %}                       # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (test_optimize and TestBrute and test_workers)" %}    # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (TestLevyStable and test_location_scale)" %}          # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (TestShgoArguments and test_19_parallelization)" %}   # [aarch64 or ppc64le]
{% set tests_to_skip = tests_to_skip + " or (TestDifferentialEvolutionSolver and (test_immediate_updating or test_parallel))" %}    # [aarch64 or ppc64le]
# tests that run into timeouts (set in scipy test suite) in emulation
{% set tests_to_skip = tests_to_skip + " or (test_propack and test_examples)" %}                  # [aarch64 or ppc64le]
# occasionally runs out of memory on windows + pypy
{% set tests_to_skip = tests_to_skip + " or test_bootstrap_against_" %}                           # [(python_impl == "pypy") and win]
{% set tests_to_skip = tests_to_skip + " or test_more_converged" %}                               # [(python_impl == "pypy") and win]
# fails on windows + pypy due to some file access race
{% set tests_to_skip = tests_to_skip + " or (test_read_over64bit and _fast_matrix_market)" %}     # [(python_impl == "pypy") and win]
# very slow tests for pypy in emulation
[several]

Details

lib	for 1.11.4	now	updated version	updated build
`scipy`	`1.11.4`	`1.12.0`	X
`numpy`	`1.26.3`	`1.26.4`	X
`libblas`	`3.9.0-20`	`3.9.0-21`		X
`blis`	`0.9.0-1`	`0.9.0-1`
`openblas`	`0.3.25-0`	`0.3.26-0`	X
`mkl`	`2023.2.0-50496` (linux) `2023.2.0-50500` (osx) `2023.2.0-50497` (win)	`2024.0.0-49657` (linux) `2023.2.0-50500` (osx) `2024.0.0-49657` (win)	X
`netlib`	`3.9.0-5`	`3.9.0-5`
`pypy`	`7.3.13-1`	`7.3.15-1`	X
`pythran`	`0.15.0-0`	`0.15.0-1`		X
`qemu-user-static`	`8.1.3-1`	`8.1.3-1`

Excludes scipy/scipy#15533 now, as it's too much of a hassle to track in this matrix; see section below.

variant	1.11.4	now
linux + x64 + blis	-	new failure: `test_x0_working[tfqmr]`
linux + aarch64 + openblas	60 failures, mostly QR-related; apparently due to emulation	remain
linux + {aarch64,ppc64le}	6 failures in `test_distribution_outside_support`	gone 🥳
osx + x64 + accelerate	1 flaky test failure (minor tolerance violation)	remains (non-flaky)
osx + x64 + mkl + PyPy	1-2 test failures	remain
win + openblas	1 failure	9-12 failures

variant	accelerate	blis	mkl w/ avx512	mkl w/o avx512	netlib	openblas w/ avx512	openblas w/o avx512	sum**
linux / x64	➖	❌	✔️	❌	✔️	✔️	✔️	10F
linux / aarch64	➖	➖	➖	➖	✔️	➖	❌	4F
linux / ppc64le	➖	➖	➖	➖	✔️	➖	✔️	-
osx / arm	❔	➖	➖	➖	❔	➖	❔	-
osx / x64	❌	✔️	➖	✔️/ ❌(PyPy)	✔️	➖	✔️	6F
win / x64	➖	✔️	✔️	❌	✔️	❌	❌	15F
sum**	5F	5F	-	11F	-	5F	9F	35F

** sum of Segfaults (S), Failures (F), resp. Timeouts (T); out of a total of 113 CI combinations being tested

Build logs:
Azure

The curious case of `test_x0_equals_Mb[nonsymposdef-bicgstab]`

For main discussion see scipy/scipy#15533.

	1.11.0	1.11.4	1.12.0
linux + x64 + blis + avx2	✔️	✔️	✔️
linux + x64 + blis + avx512	✔️	✔️	✔️
linux + x64 + mkl + avx2	✔️	✔️	❌
linux + x64 + mkl + avx512	❌	❌	✔️
linux + x64 + netlib + avx2	✔️	✔️	✔️
linux + x64 + netlib + avx512	✔️	✔️	✔️
linux + x64 + openblas + avx2	✔️	✔️	✔️
linux + x64 + openblas + avx512	✔️	❌	✔️
linux + aarch64 + netlib	✔️	✔️	✔️
linux + aarch64 + openblas	✔️	✔️	❌
osx + x64 + accelerate	✔️	✔️	✔️/❌
win + x64 + blis + avx2	✔️	❌	✔️
win + x64 + blis + avx512	✔️	❌	✔️
win + x64 + mkl + avx2	✔️	✔️	❌
win + x64 + mkl + avx512	❌	✔️	✔️
win + x64 + openblas + avx2	✔️	✔️	✔️
win + x64 + openblas + avx512	✔️	✔️	✔️

everywhere: 20 failures for test_multiple_ellipsis_slicing

FAILED sparse/tests/test_base.py::Test64Bit::test_no_64[TestBSR-test_multiple_ellipsis_slicing] - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::Test64Bit::test_no_64[TestCOO-test_multiple_ellipsis_slicing] - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_no_64[TestDIA-test_multiple_ellipsis_slicing] - Failed: TypeError: 'dia_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_32[TestBSR-test_multiple_ellipsis_slicing] - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_32[TestCOO-test_multiple_ellipsis_slicing] - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_32[TestDIA-test_multiple_ellipsis_slicing] - Failed: TypeError: 'dia_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_64[TestBSR-test_multiple_ellipsis_slicing] - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_64[TestCOO-test_multiple_ellipsis_slicing] - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_all_64[TestDIA-test_multiple_ellipsis_slicing] - Failed: TypeError: 'dia_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_limit_10[TestBSR-test_multiple_ellipsis_slicing] - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_limit_10[TestCOO-test_multiple_ellipsis_slicing] - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_limit_10[TestDIA-test_multiple_ellipsis_slicing] - Failed: TypeError: 'dia_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_random[TestBSR-test_multiple_ellipsis_slicing] - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_random[TestCOO-test_multiple_ellipsis_slicing] - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::Test64Bit::test_resiliency_random[TestDIA-test_multiple_ellipsis_slicing] - Failed: TypeError: 'dia_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::TestBSR::test_multiple_ellipsis_slicing - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::TestBSRNonCanonical::test_multiple_ellipsis_slicing - Failed: NotImplementedError
FAILED sparse/tests/test_base.py::TestCOO::test_multiple_ellipsis_slicing - Failed: TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::TestCOONonCanonical::test_multiple_ellipsis_slicing - TypeError: 'coo_matrix' object is not subscriptable
FAILED sparse/tests/test_base.py::TestDIA::test_multiple_ellipsis_slicing - Failed: TypeError: 'dia_matrix' object is not subscriptable

linux + x64 + blis: 1 failure

____________________________ test_x0_working[tfqmr] ____________________________
[gw1] linux -- Python 3.10.13 $PREFIX/bin/python
$PREFIX/lib/python3.10/site-packages/scipy/sparse/linalg/_isolve/tests/test_iterative.py:507: in test_x0_working
    assert norm(A @ x - b) <= 2e-6*norm(b)
E   assert 3.5355292454346426e-06 <= (2e-06 * 1.240298651028214)
E    +  where 3.5355292454346426e-06 = norm(((array([[3.68514493, 2.22433683, 2.80424149, 2.06524296, 2.82772901,\n        1.70134349, 2.98806253, 2.88379072, 1.9578..., 2.29515724, 2.77591422, 1.55001596, 1.93969785,\n        1.88091968, 2.24894423, 2.49791763, 1.66944017, 2.12310297]]) @ array([ -1.22142941, -23.52880604,  -4.72398545, -21.36850239,\n       -12.68971238,  -0.96740459,  32.8587725 , -11.40286367,\n        10.993623  ,  30.93083318])) - array([0.55127821, 0.22828434, 0.09135873, 0.07249963, 0.11693987,\n       0.74246847, 0.72216603, 0.1607452 , 0.15471589, 0.18022921])))
E    +  and   1.240298651028214 = norm(array([0.55127821, 0.22828434, 0.09135873, 0.07249963, 0.11693987,\n       0.74246847, 0.72216603, 0.1607452 , 0.15471589, 0.18022921]))
        A          = array([[3.68514493, 2.22433683, 2.80424149, 2.06524296, 2.82772901,
        1.70134349, 2.98806253, 2.88379072, 1.9578..., 2.29515724, 2.77591422, 1.55001596, 1.93969785,
        1.88091968, 2.24894423, 2.49791763, 1.66944017, 2.12310297]])
        b          = array([0.55127821, 0.22828434, 0.09135873, 0.07249963, 0.11693987,
       0.74246847, 0.72216603, 0.1607452 , 0.15471589, 0.18022921])
        info       = 0
        kw         = {'atol': 0, 'rtol': 1e-06}
        n          = 10
        rng        = Generator(PCG64) at 0x7F5F881FF680
        solver     = <function tfqmr at 0x7f5f8ef58ee0>
        x          = array([ -1.22142941, -23.52880604,  -4.72398545, -21.36850239,
       -12.68971238,  -0.96740459,  32.8587725 , -11.40286367,
        10.993623  ,  30.93083318])
        x0         = array([0.63685093, 0.46836296, 0.0677924 , 0.52832101, 0.49467215,
       0.68333247, 0.3392967 , 0.57867322, 0.25729156, 0.60952728])

linux + x64 + mkl + non-avx512 / linux + aarch64 + openblas / osx + x64 + accelerate: 1 failure

___________________ test_x0_equals_Mb[nonsymposdef-bicgstab] ___________________
[gw0] linux -- Python 3.9.18 $PREFIX/bin/python
$PREFIX/lib/python3.9/site-packages/scipy/sparse/linalg/_isolve/tests/test_iterative.py:520: in test_x0_equals_Mb
    assert info == 0
E   assert -11 == 0
        A          = <10x10 sparse matrix of type '<class 'numpy.float64'>'
	with 19 stored elements in Compressed Sparse Row format>
        b          = array([0., 1., 2., 3., 4., 5., 6., 7., 8., 9.])
        case       = <nonsymposdef-bicgstab>
        info       = -11
        rtol       = 1e-08
        x          = array([0.        , 0.52361589, 1.32356787, 2.15281624, 3.        ,
       4.        , 5.        , 6.        , 7.        , 8.        ])
        x0         = 'Mb'

on aarch, we get assert -10 == 0 instead of assert -11 == 0...

linux + aarch64: 60 failures

FAILED linalg/tests/test_basic.py::TestLstsq::test_random_overdet - AssertionError: 
Not equal to tolerance rtol=2.98023e-06, atol=2.98023e-06
driver: gelsd
Mismatched elements: 45 / 45 (100%)
Max absolute difference: 23.948622
Max relative difference: 1.0819286
 x: array([[-2.175595e-02,  1.430921e-01,  1.740819e-02],
       [ 2.515154e-02,  2.834489e-02, -6.470084e-03],
       [-5.744661e-05,  1.434425e-02,  4.162818e-02],...
 y: array([[  4.199296,   5.158111,   2.723422],
       [ 11.47436 ,  11.579989,   5.939486],
       [  0.678561,   0.932052,   0.4389  ],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_tall_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.35266802
Max relative difference: 1.35266802
 x: array([[ 0.51534 , -0.066137, -0.282195, -0.078835,  0.126846,  0.063667,
         0.254653,  0.145272,  0.297032, -0.312945,  0.047386, -0.375106],
       [-0.066137,  0.058695,  0.107405, -0.020373, -0.37564 , -0.306869,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_tall_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.38513473
Max relative difference: 1.38513473
 x: array([[ 0.194025,  0.271456,  0.193257, -0.103866,  0.639289,  0.325098,
        -0.308913,  0.225063,  0.009908,  0.531324,  0.418844,  0.486349],
       [ 0.271456, -0.024757,  0.531958, -0.127783,  0.087164,  0.124488,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_delete_last_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.39604267
Max relative difference: 1.39604267
 x: array([[ 7.312894e-01,  2.936634e-02, -2.486336e-01, -3.261323e-01,
         4.044664e-03, -1.884397e-02,  4.260744e-01,  4.652548e-01,
         4.959358e-02,  2.202561e-04, -5.590688e-01, -1.013507e-04],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_unit_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.35266802
Max relative difference: 1.35266802
 x: array([[ 0.51534 , -0.066137, -0.282195, -0.078835,  0.126846,  0.063667,
         0.254653,  0.145272,  0.297032, -0.312945,  0.047386, -0.375106],
       [-0.066137,  0.058695,  0.107405, -0.020373, -0.37564 , -0.306869,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_unit_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.37619865
Max relative difference: 1.37619865
 x: array([[ 1.469219e-01,  5.787525e-01,  5.345633e-02, -4.102918e-01,
         5.512089e-01, -6.510306e-02, -3.209547e-01, -2.358620e-01,
         2.342797e-01,  2.828279e-01,  3.863396e-01,  1.333238e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_neg_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.35266802
Max relative difference: 1.35266802
 x: array([[ 0.51534 , -0.066137, -0.282195, -0.078835,  0.126846,  0.063667,
         0.254653,  0.145272,  0.297032, -0.312945,  0.047386, -0.375106],
       [-0.066137,  0.058695,  0.107405, -0.020373, -0.37564 , -0.306869,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_neg_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.37619865
Max relative difference: 1.37619865
 x: array([[ 1.469219e-01,  5.787525e-01,  5.345633e-02, -4.102918e-01,
         5.512089e-01, -6.510306e-02, -3.209547e-01, -2.358620e-01,
         2.342797e-01,  2.828279e-01,  3.863396e-01,  1.333238e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_itemize_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.35266802
Max relative difference: 1.35266802
 x: array([[ 0.51534 , -0.066137, -0.282195, -0.078835,  0.126846,  0.063667,
         0.254653,  0.145272,  0.297032, -0.312945,  0.047386, -0.375106],
       [-0.066137,  0.058695,  0.107405, -0.020373, -0.37564 , -0.306869,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_itemize_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.37619865
Max relative difference: 1.37619865
 x: array([[ 1.469219e-01,  5.787525e-01,  5.345633e-02, -4.102918e-01,
         5.512089e-01, -6.510306e-02, -3.209547e-01, -2.358620e-01,
         2.342797e-01,  2.828279e-01,  3.863396e-01,  1.333238e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_native_byte_order_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.35266802
Max relative difference: 1.35266802
 x: array([[ 0.51534 , -0.066137, -0.282195, -0.078835,  0.126846,  0.063667,
         0.254653,  0.145272,  0.297032, -0.312945,  0.047386, -0.375106],
       [-0.066137,  0.058695,  0.107405, -0.020373, -0.37564 , -0.306869,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRdelete_f::test_non_native_byte_order_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.37619865
Max relative difference: 1.37619865
 x: array([[ 1.469219e-01,  5.787525e-01,  5.345633e-02, -4.102918e-01,
         5.512089e-01, -6.510306e-02, -3.209547e-01, -2.358620e-01,
         2.342797e-01,  2.828279e-01,  3.863396e-01,  1.333238e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_sqr_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.47812065
Max relative difference: 1.47812065
 x: array([[ 0.427075,  0.052891,  0.034453,  0.178182,  0.20928 , -0.183314,
        -0.029952,  0.108337,  0.05796 ],
       [ 0.052891,  0.173273,  0.570958, -0.143117,  0.093308,  0.188859,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_sqr_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.49504468
Max relative difference: 1.49504468
 x: array([[ 0.025394,  0.222058,  0.609238,  0.497672,  0.354511,  0.041871,
         0.731882, -0.370673, -0.38842 , -0.11726 , -0.131466],
       [ 0.222058,  0.635692, -0.111061,  0.158848,  0.168521, -0.129045,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 169 / 169 (100%)
Max absolute difference: 1.47401035
Max relative difference: 1.47401035
 x: array([[ 0.522431, -0.118259, -0.003304,  0.450749, -0.030897,  0.1499  ,
         0.07167 , -0.145986, -0.025632, -0.278439, -0.021617, -0.100983,
        -0.252881],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 225 / 225 (100%)
Max absolute difference: 1.21126013
Max relative difference: 1.21126013
 x: array([[ 0.008006,  0.003634,  0.082993, -0.105183,  0.469302, -0.159896,
        -0.186092,  0.237852,  0.166177, -0.004724,  0.300496, -0.172572,
         0.054354,  0.01367 ,  0.251432],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.45033643
Max relative difference: 1.45033643
 x: array([[ 0.29902 ,  0.501335,  0.272783,  0.074555,  0.132249, -0.02093 ,
         0.245842, -0.023263,  0.475552,  0.064034, -0.186375,  0.20676 ],
       [ 0.501335,  0.219159, -0.362003, -0.375209, -0.100792, -0.299124,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_p_col_tall - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.52949911
Max relative difference: 1.52949911
 x: array([[ 0.396285, -0.118527,  0.404352,  0.024046,  0.185335,  0.491734,
        -0.084112,  0.179654, -0.282193,  0.263326, -0.229785, -0.033931],
       [-0.118527, -0.145312,  0.166583,  0.136687,  0.248487,  0.227176,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_p_col_sqr - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.29536363
Max relative difference: 1.29536363
 x: array([[ 1.839437e-01,  3.666864e-03,  5.269710e-01, -9.558372e-02,
         4.485931e-01, -1.068802e-01, -3.599494e-01,  2.523912e-01,
         5.202088e-01,  7.875285e-02, -2.388350e-01,  1.856074e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_tall_p_col_fat - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.22226353
Max relative difference: 1.22226353
 x: array([[ 0.30203 ,  0.289442,  0.491229,  0.232481,  0.069349, -0.017829,
         0.0731  , -0.101897, -0.061624,  0.032908, -0.294819, -0.209391],
       [ 0.289442, -0.027515, -0.225598, -0.00597 ,  0.261011,  0.194242,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_fat_p_row_fat - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 100 / 100 (100%)
Max absolute difference: 1.52807027
Max relative difference: 1.52807027
 x: array([[ 0.476516,  0.678434,  0.487398,  0.170842, -0.530036, -0.049983,
        -0.051561, -0.034272,  0.340691, -0.532899],
       [ 0.678434, -0.52807 , -0.086754,  0.512772,  0.126919,  0.114655,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_fat_p_row_sqr - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.33379635
Max relative difference: 1.33379635
 x: array([[ 0.407052,  0.457873, -0.2282  ,  0.20684 ,  0.335016, -0.217718,
         0.024833, -0.165538,  0.372844,  0.298751, -0.199244, -0.277085],
       [ 0.457873, -0.333796,  0.153424,  0.595791, -0.424009,  0.076896,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_fat_p_row_tall - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 196 / 196 (100%)
Max absolute difference: 1.45184031
Max relative difference: 1.45184031
 x: array([[ 1.306703e-01,  2.308598e-01,  1.503783e-02,  4.989481e-01,
         2.612073e-01, -6.566251e-02, -1.365806e-02, -4.439392e-01,
        -9.274840e-02, -3.816905e-02,  2.477478e-01,  1.054653e-01,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_economic_p_col_eco - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 100 / 100 (100%)
Max absolute difference: 1.37845999
Max relative difference: 1.37845999
 x: array([[ 0.488817,  0.293726,  0.560871, -0.452365,  0.316418,  0.060158,
         0.176355,  0.412072, -0.13077 ,  0.404673],
       [ 0.293726,  0.266032, -0.246029,  0.125679, -0.167877,  0.233249,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_economic_p_col_sqr - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.60243899
Max relative difference: 1.60243899
 x: array([[-3.211651e-01,  3.666854e-03,  5.269712e-01, -1.675753e-01,
         5.411102e-01, -1.068804e-01, -3.599494e-01,  1.086038e-02,
         4.765480e-01,  7.875297e-02, -2.388351e-01,  4.631867e-01],...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_economic_p_col_fat - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.22226353
Max relative difference: 1.22226353
 x: array([[ 0.038019,  0.289442,  0.491229,  0.232482,  0.065881, -0.01783 ,
         0.073099, -0.101897,  0.340713,  0.032909, -0.294819, -0.209391],
       [ 0.289442, -0.027515, -0.225598, -0.00597 ,  0.170632,  0.194242,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_Mx1_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.35482377
Max relative difference: 1.35482377
 x: array([[ 0.204203,  0.081063,  0.547405, -0.497832,  0.44612 , -0.364956,
         0.282041,  0.048404, -0.144208],
       [ 0.081063,  0.102958, -0.048356,  0.717492,  0.188318, -0.23341 ,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_Mx1_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.33370879
Max relative difference: 1.33370879
 x: array([[ 0.421005,  0.417547, -0.32667 , -0.29249 ,  0.282903,  0.253645,
        -0.110355, -0.220882, -0.263948, -0.180241,  0.751357],
       [ 0.417547, -0.047571, -0.367514, -0.214091, -0.303108, -0.364512,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_unit_strides_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.47812065
Max relative difference: 1.47812065
 x: array([[ 0.427075,  0.052891,  0.034453,  0.178182,  0.20928 , -0.183314,
        -0.029952,  0.108337,  0.05796 ],
       [ 0.052891,  0.173273,  0.570958, -0.143117,  0.093308,  0.188859,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_unit_strides_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.49504468
Max relative difference: 1.49504468
 x: array([[ 0.025394,  0.222058,  0.609238,  0.497672,  0.354511,  0.041871,
         0.731882, -0.370673, -0.38842 , -0.11726 , -0.131466],
       [ 0.222058,  0.635692, -0.111061,  0.158848,  0.168521, -0.129045,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_unit_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.45033643
Max relative difference: 1.45033643
 x: array([[ 0.29902 ,  0.501335,  0.272783,  0.074555,  0.132249, -0.02093 ,
         0.245842, -0.023263,  0.475552,  0.064034, -0.186375,  0.20676 ],
       [ 0.501335,  0.219159, -0.362003, -0.375209, -0.100792, -0.299124,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_unit_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.52949911
Max relative difference: 1.52949911
 x: array([[ 0.396285, -0.118527,  0.404352,  0.024046,  0.185335,  0.491734,
        -0.084112,  0.179654, -0.282193,  0.263326, -0.229785, -0.033931],
       [-0.118527, -0.145312,  0.166583,  0.136687,  0.248487,  0.227176,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_neg_strides_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.47812065
Max relative difference: 1.47812065
 x: array([[ 0.427075,  0.052891,  0.034453,  0.178182,  0.20928 , -0.183314,
        -0.029952,  0.108337,  0.05796 ],
       [ 0.052891,  0.173273,  0.570958, -0.143117,  0.093308,  0.188859,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_neg_strides_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.49504468
Max relative difference: 1.49504468
 x: array([[ 0.025394,  0.222058,  0.609238,  0.497672,  0.354511,  0.041871,
         0.731882, -0.370673, -0.38842 , -0.11726 , -0.131466],
       [ 0.222058,  0.635692, -0.111061,  0.158848,  0.168521, -0.129045,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_neg_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.45033643
Max relative difference: 1.45033643
 x: array([[ 0.29902 ,  0.501335,  0.272783,  0.074555,  0.132249, -0.02093 ,
         0.245842, -0.023263,  0.475552,  0.064034, -0.186375,  0.20676 ],
       [ 0.501335,  0.219159, -0.362003, -0.375209, -0.100792, -0.299124,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_neg_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.52949911
Max relative difference: 1.52949911
 x: array([[ 0.396285, -0.118527,  0.404352,  0.024046,  0.185335,  0.491734,
        -0.084112,  0.179654, -0.282193,  0.263326, -0.229785, -0.033931],
       [-0.118527, -0.145312,  0.166583,  0.136687,  0.248487,  0.227176,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_itemsize_strides_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.47812065
Max relative difference: 1.47812065
 x: array([[ 0.427075,  0.052891,  0.034453,  0.178182,  0.20928 , -0.183314,
        -0.029952,  0.108337,  0.05796 ],
       [ 0.052891,  0.173273,  0.570958, -0.143117,  0.093308,  0.188859,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_itemsize_strides_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.49504468
Max relative difference: 1.49504468
 x: array([[ 0.025394,  0.222058,  0.609238,  0.497672,  0.354511,  0.041871,
         0.731882, -0.370673, -0.38842 , -0.11726 , -0.131466],
       [ 0.222058,  0.635692, -0.111061,  0.158848,  0.168521, -0.129045,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_itemsize_strides_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.45033643
Max relative difference: 1.45033643
 x: array([[ 0.29902 ,  0.501335,  0.272783,  0.074555,  0.132249, -0.02093 ,
         0.245842, -0.023263,  0.475552,  0.064034, -0.186375,  0.20676 ],
       [ 0.501335,  0.219159, -0.362003, -0.375209, -0.100792, -0.299124,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_itemsize_strides_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.52949911
Max relative difference: 1.52949911
 x: array([[ 0.396285, -0.118527,  0.404352,  0.024046,  0.185335,  0.491734,
        -0.084112,  0.179654, -0.282193,  0.263326, -0.229785, -0.033931],
       [-0.118527, -0.145312,  0.166583,  0.136687,  0.248487,  0.227176,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_native_byte_order_1_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 81 / 81 (100%)
Max absolute difference: 1.47812065
Max relative difference: 1.47812065
 x: array([[ 0.427075,  0.052891,  0.034453,  0.178182,  0.20928 , -0.183314,
        -0.029952,  0.108337,  0.05796 ],
       [ 0.052891,  0.173273,  0.570958, -0.143117,  0.093308,  0.188859,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_native_byte_order_p_row - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 121 / 121 (100%)
Max absolute difference: 1.49504468
Max relative difference: 1.49504468
 x: array([[ 0.025394,  0.222058,  0.609238,  0.497672,  0.354511,  0.041871,
         0.731882, -0.370673, -0.38842 , -0.11726 , -0.131466],
       [ 0.222058,  0.635692, -0.111061,  0.158848,  0.168521, -0.129045,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_native_byte_order_1_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.45033643
Max relative difference: 1.45033643
 x: array([[ 0.29902 ,  0.501335,  0.272783,  0.074555,  0.132249, -0.02093 ,
         0.245842, -0.023263,  0.475552,  0.064034, -0.186375,  0.20676 ],
       [ 0.501335,  0.219159, -0.362003, -0.375209, -0.100792, -0.299124,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRinsert_f::test_non_native_byte_order_p_col - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.52949911
Max relative difference: 1.52949911
 x: array([[ 0.396285, -0.118527,  0.404352,  0.024046,  0.185335,  0.491734,
        -0.084112,  0.179654, -0.282193,  0.263326, -0.229785, -0.033931],
       [-0.118527, -0.145312,  0.166583,  0.136687,  0.248487,  0.227176,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_tall_rank_1 - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_tall_rank_p - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_unit_strides_rank_1 - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_unit_strides_rank_p - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.5197227
Max relative difference: 1.5197227
 x: array([[ 0.030667,  0.051494, -0.262698, -0.204111,  0.552454,  0.260673,
        -0.072537,  0.140756,  0.215893, -0.045971,  0.289605, -0.198233],
       [ 0.051494,  0.300886,  0.159218,  0.002972, -0.091647,  0.648182,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_neg_strides_rank_1 - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_neg_strides_rank_p - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.5197227
Max relative difference: 1.5197227
 x: array([[ 0.030667,  0.051494, -0.262698, -0.204111,  0.552454,  0.260673,
        -0.072537,  0.140756,  0.215893, -0.045971,  0.289605, -0.198233],
       [ 0.051494,  0.300886,  0.159218,  0.002972, -0.091647,  0.648182,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_itemsize_strides_rank_1 - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_itemsize_strides_rank_p - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.5197227
Max relative difference: 1.5197227
 x: array([[ 0.030667,  0.051494, -0.262698, -0.204111,  0.552454,  0.260673,
        -0.072537,  0.140756,  0.215893, -0.045971,  0.289605, -0.198233],
       [ 0.051494,  0.300886,  0.159218,  0.002972, -0.091647,  0.648182,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_native_byte_order_rank_1 - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.56318134
Max relative difference: 1.56318134
 x: array([[-0.054046,  0.205639, -0.123517,  0.260355,  0.474265, -0.249005,
         0.177618, -0.301207,  0.618385, -0.037394,  0.023149,  0.252298],
       [ 0.205639,  0.756895, -0.286572,  0.154587,  0.321836,  0.283857,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_decomp_update.py::TestQRupdate_f::test_non_native_byte_order_rank_p - AssertionError: 
Not equal to tolerance rtol=0.0001, atol=1.19209e-06

Mismatched elements: 144 / 144 (100%)
Max absolute difference: 1.5197227
Max relative difference: 1.5197227
 x: array([[ 0.030667,  0.051494, -0.262698, -0.204111,  0.552454,  0.260673,
        -0.072537,  0.140756,  0.215893, -0.045971,  0.289605, -0.198233],
       [ 0.051494,  0.300886,  0.159218,  0.002972, -0.091647,  0.648182,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.],
       [0., 0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0.],...
FAILED linalg/tests/test_lapack.py::test_pftri - AssertionError: 
Arrays are not almost equal to 4 decimals

Mismatched elements: 21 / 400 (5.25%)
Max absolute difference: 0.00037931
Max relative difference: 0.64988735
 x: array([[ 5.0451e-02, -1.1576e-03,  2.7290e-04, -1.5024e-03, -1.7656e-03,
        -1.3410e-03, -1.4870e-03, -7.1398e-04, -1.4734e-03, -2.5769e-03,
        -2.0850e-03, -9.8616e-04, -7.3829e-04, -1.9978e-03,  1.7069e-04,...
 y: array([[ 5.0565e-02, -1.0042e-03,  2.1366e-04, -1.5335e-03, -1.5981e-03,
        -1.4567e-03, -1.5799e-03, -5.9890e-04, -1.4266e-03, -2.5949e-03,
        -2.0850e-03, -9.8616e-04, -7.3829e-04, -1.9978e-03,  1.7069e-04,...
FAILED linalg/tests/test_lapack.py::test_sfrk_hfrk - AssertionError: 
Arrays are not almost equal to 4 decimals

Mismatched elements: 165 / 400 (41.2%)
Max absolute difference: 1.14951146
Max relative difference: 14.46566384
 x: array([[ 3.9575e+01,  1.3012e+00,  5.5721e-02,  1.6919e+00,  1.3906e+00,
         1.7789e+00,  8.5231e-01,  8.1178e-01,  1.2308e+00,  2.1547e+00,
         1.7334e+00,  6.0473e-01,  2.1888e-01,  2.0501e+00, -1.1836e-01,...
 y: array([[ 3.9575e+01,  1.3012e+00,  2.2163e-01,  1.2076e+00,  1.4051e+00,
         1.8348e+00,  1.0907e+00,  1.0859e+00,  1.3009e+00,  2.1895e+00,
         1.3301e+00,  1.5722e+00,  1.7302e-01,  1.5784e+00,  1.6231e-01,...
FAILED linalg/tests/test_lapack.py::TestBlockedQR::test_geqrt_gemqrt - AssertionError: 
Not equal to tolerance rtol=0, atol=1.19209e-05

Mismatched elements: 320 / 400 (80%)
Max absolute difference: 1.4186668
Max relative difference: 1.4186668
 x: array([[ 4.153938e-01,  3.214427e-01, -1.697152e-01, -2.782870e-01,
         2.549522e-01,  3.815206e-01, -1.836173e-01, -8.294257e-03,
         2.499608e-01,  1.465432e-02,  1.211796e-01, -2.663902e-01,...
 y: array([[1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.,
        0., 0., 0., 0.],
       [0., 1., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.,...
FAILED linalg/tests/test_lapack.py::TestBlockedQR::test_tpqrt_tpmqrt - AssertionError: 
Not equal to tolerance rtol=0, atol=1.19209e-05

Mismatched elements: 1024 / 1600 (64%)
Max absolute difference: 1.2731317
Max relative difference: 1.2731317
 x: array([[ 3.782889e-03,  1.856932e-02,  1.523624e-02, ..., -1.549972e-01,
         2.169387e-01, -3.143149e-01],
       [ 1.856932e-02,  4.894961e-02, -5.576465e-02, ...,  2.150272e-02,...
 y: array([[1., 0., 0., ..., 0., 0., 0.],
       [0., 1., 0., ..., 0., 0., 0.],
       [0., 0., 1., ..., 0., 0., 0.],...
FAILED linalg/tests/test_lapack.py::test_pstrf - AssertionError: 
Not equal to tolerance rtol=0, atol=0.000119209

Mismatched elements: 85 / 100 (85%)
Max absolute difference: 3.529682
Max relative difference: 1.4060138
 x: array([[3.487075, 2.2597  , 1.555289, 2.763015, 3.431685, 2.046993,
        2.797032, 2.700427, 3.422926, 2.103169],
       [2.2597  , 2.130606, 1.477844, 1.633565, 2.117459, 1.866201,...
 y: array([[3.487075, 2.2597  , 1.555289, 2.763015, 3.431685, 2.046993,
        2.797032, 2.700427, 0.      , 0.      ],
       [2.2597  , 2.38366 , 1.007861, 2.456765, 2.693789, 1.169568,...
FAILED linalg/tests/test_lapack.py::test_pstf2 - AssertionError: 
Not equal to tolerance rtol=0, atol=0.000119209

Mismatched elements: 85 / 100 (85%)
Max absolute difference: 3.529682
Max relative difference: 1.4060138
 x: array([[3.487075, 2.2597  , 1.555289, 2.763015, 3.431685, 2.046993,
        2.797032, 2.700427, 3.422926, 2.103169],
       [2.2597  , 2.130606, 1.477844, 1.633565, 2.117459, 1.866201,...
 y: array([[3.487075, 2.2597  , 1.555289, 2.763015, 3.431685, 2.046993,
        2.797032, 2.700427, 0.      , 0.      ],
       [2.2597  , 2.38366 , 1.007861, 2.456765, 2.693789, 1.169568,...

osx + x64 + accelerate: 1 failure

FAILED interpolate/tests/test_rbfinterp.py::TestRBFInterpolatorNeighbors20::test_pickleable - AssertionError: 
Arrays are not equal

Mismatched elements: 4 / 50 (8%)
Max absolute difference: 5.55111512e-17
Max relative difference: 9.28510161e-16
 x: array([-0.238461,  0.257024, -0.811244,  0.295313,  0.132623,  0.2038  ,
       -0.99615 ,  0.29755 , -0.019889,  0.230791, -0.516801,  0.279867,
        0.227767,  0.178071, -0.172756,  0.251327, -0.406818,  0.271919,...
 y: array([-0.238461,  0.257024, -0.811244,  0.295313,  0.132623,  0.2038  ,
       -0.99615 ,  0.29755 , -0.019889,  0.230791, -0.516801,  0.279867,
        0.227767,  0.178071, -0.172756,  0.251327, -0.406818,  0.271919,...

osx + x64 + mkl + pypy: 2 failures

FAILED linalg/tests/test_decomp_cossin.py::test_cossin[True-40-12-20-float32] - AssertionError: 
Not equal to tolerance rtol=0, atol=1.19209e-06

Mismatched elements: 166 / 1600 (10.4%)
Max absolute difference: 1.2262093
Max relative difference: 2.0001094
 x: array([[ 0.088203, -0.328941, -0.031064, ...,  0.      ,  0.      ,
         0.      ],
       [-0.233614, -0.048775, -0.223086, ...,  0.      ,  0.      ,...
 y: array([[ 0.088203, -0.328941, -0.031064, ...,  0.      ,  0.      ,
         0.      ],
       [ 0.233614,  0.048775,  0.223086, ...,  0.      ,  0.      ,...
FAILED linalg/tests/test_decomp_cossin.py::test_cossin[False-40-12-20-float32] - AssertionError: 
Not equal to tolerance rtol=0, atol=1.19209e-06

Mismatched elements: 156 / 1600 (9.75%)
Max absolute difference: 1.1218276
Max relative difference: 2.0000126
 x: array([[ 0.088203, -0.328941, -0.031064, ...,  0.      ,  0.      ,
         0.      ],
       [ 0.233614,  0.048776,  0.223085, ...,  0.      ,  0.      ,...
 y: array([[ 0.088203, -0.328941, -0.031065, ...,  0.      ,  0.      ,
         0.      ],
       [ 0.233614,  0.048776,  0.223085, ...,  0.      ,  0.      ,...

windows + openblas: 9-12 failures

FAILED _lib/tests/test_import_cycles.py::test_public_modules_importable - AssertionError: Failed to import scipy.cluster
assert 1 == 0
 +  where 1 = <bound method Popen.wait of <Popen: returncode: 1 args: ['C:\\bld\\scipy-split_1709763107552\\_test_env\...>>()
 +    where <bound method Popen.wait of <Popen: returncode: 1 args: ['C:\\bld\\scipy-split_1709763107552\\_test_env\...>> = <Popen: returncode: 1 args: ['C:\\bld\\scipy-split_1709763107552\\_test_env\...>.wait
FAILED interpolate/tests/test_interpnd.py::TestCloughTocher2DInterpolator::test_dense
FAILED linalg/tests/test_basic.py::TestLstsq::test_random_exact
FAILED linalg/tests/test_decomp.py::TestEig::test_bad_geneig - AssertionError: 
Not equal to tolerance rtol=1e-07, atol=1e-07

array([[ 1.    ,  0.    ,  0.    ,  0.    ],
       [ 0.    ,  1.    ,  0.    ,  0.    ],
       [ 0.    ,  0.    , -8.9975,  0.    ],
       [ 0.    ,  0.    ,  0.    , -8.9975]])
array([[ 0. ,  0. ,  1. ,  0. ],
       [ 0. ,  0. ,  0. ,  1. ],
       [ 1. ,  0. ,  0. , -0.1],
       [ 0. ,  1. ,  0.1,  0. ]])
Mismatched elements: 3 / 4 (75%)
Max absolute difference: 6.
Max relative difference: 2.03389831
 x: array([0.000000e+00-3.05j, 0.000000e+00+3.05j, 1.001943e-16-2.95j,
       1.001943e-16+2.95j])
 y: array([0.-3.05j, 0.-2.95j, 0.+2.95j, 0.+3.05j])
FAILED sparse/linalg/tests/test_propack.py::test_examples[False-float32]
FAILED sparse/linalg/tests/test_propack.py::test_examples[False-float64]
FAILED sparse/linalg/tests/test_propack.py::test_examples[False-complex64]
FAILED sparse/linalg/tests/test_propack.py::test_examples[True-float32]
FAILED sparse/linalg/tests/test_propack.py::test_examples[True-float64]
FAILED sparse/linalg/tests/test_propack.py::test_examples[True-complex64]
FAILED spatial/tests/test_qhull.py::TestUtilities::test_more_barycentric_transforms
FAILED spatial/tests/test_qhull.py::TestUtilities::test_degenerate_barycentric_transforms

h-vetinari · 2024-04-14T10:23:46Z

While preparing the update for 1.13, I noticed that I had failed to mention/count the new failures on linux+blis correctly; updated the previous comment accordingly.

h-vetinari · 2024-06-25T02:00:53Z

Closing as obsolete now that 1.14 is out (and 1.12 patch releases basically an impossibility)

h-vetinari mentioned this pull request Jan 23, 2024

Patch for openblas 0.3.26 compatibility #266

Closed

1 task

h-vetinari added 5 commits March 7, 2024 08:01

test for all blas variants

f806f46

distinguish mkl/openblas runs for avx512 presence/absence

a5871c4

enable setting pagefile size on windows

48a10fd

unskip some tests

89b1922

MNT: Re-rendered with conda-build 3.28.3, conda-smithy 3.30.4, and co…

56970e3

…nda-forge-pinning 2024.01.23.02.50.07

h-vetinari force-pushed the 1.12_blas_vars branch from 133b2e6 to 56970e3 Compare March 6, 2024 21:02

h-vetinari mentioned this pull request Mar 6, 2024

TST: linalg: fix complex sort in test_bad_geneig scipy/scipy#20197

Merged

h-vetinari added 2 commits March 18, 2024 09:29

show log for running tests on bare scipy in case of failure

a12fb8b

avoid flang 18 for now

3bd783d

h-vetinari mentioned this pull request Mar 18, 2024

TST: new test failures (mostly crashes) with scipy 1.12+ and OpenBLAS 0.3.26+ scipy/scipy#20271

Open

h-vetinari added 2 commits March 18, 2024 18:50

backport potential fix for test_bad_geneig

c0a0f48

use pytest <8

16fb6d3

h-vetinari mentioned this pull request Apr 12, 2024

TEST: 1.13.x + blas variants #273

Closed

h-vetinari closed this Jun 25, 2024

h-vetinari deleted the 1.12_blas_vars branch June 25, 2024 02:00

h-vetinari mentioned this pull request Jun 25, 2024

TEST: 1.14.x + blas variants #280

Closed

h-vetinari mentioned this pull request Jan 8, 2025

TEST: v1.15.x + blas variants #295

Closed

h-vetinari mentioned this pull request Jun 30, 2025

TEST: v1.16.x + blas variants #304

Closed

h-vetinari mentioned this pull request May 27, 2026

TEST: v1.17.x + blas variants #323

Draft

h-vetinari mentioned this pull request Jun 22, 2026

TEST: v1.18.x + blas variants #326

Draft

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

TEST: 1.12.x + blas variants#267

TEST: 1.12.x + blas variants#267
h-vetinari wants to merge 9 commits into
conda-forge:mainfrom
h-vetinari:1.12_blas_vars

h-vetinari commented Jan 23, 2024

Uh oh!

conda-forge-webservices Bot commented Jan 23, 2024

Uh oh!

isuruf commented Jan 23, 2024

Uh oh!

h-vetinari commented Jan 23, 2024

Uh oh!

h-vetinari commented Mar 18, 2024 •

edited

Loading

Uh oh!

h-vetinari commented Apr 14, 2024

Uh oh!

h-vetinari commented Jun 25, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Uh oh!

Uh oh!

Conversation

h-vetinari commented Jan 23, 2024

Uh oh!

conda-forge-webservices Bot commented Jan 23, 2024

Uh oh!

isuruf commented Jan 23, 2024

Uh oh!

h-vetinari commented Jan 23, 2024

Uh oh!

h-vetinari commented Mar 18, 2024 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Scipy 1.12.0

TL;DR: Cautiously improving, but OpenBLAS-related problems remain (new ones on windows)

Notable

Good News

Bad News

Restrictions

Details

The curious case of test_x0_equals_Mb[nonsymposdef-bicgstab]

Uh oh!

h-vetinari commented Apr 14, 2024

Uh oh!

h-vetinari commented Jun 25, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

h-vetinari commented Mar 18, 2024 •

edited

Loading

The curious case of `test_x0_equals_Mb[nonsymposdef-bicgstab]`