This project aims to support cameras in different ports in micropython, starting with the ESP32-Port and omnivision (OV2640 & OV5640) cameras. The project implements a general API for cameras in micropython (such as circuitpython have done). At the moment, this is a micropython user module, but it might get in the micropython repo in the future. The API is stable, but it might change without previous anounce.
To build the project, follow the following instructions:
- ESP-IDF: I used version 5.2.2, but it might work with other versions.
- Clone the micropython repo and this repo in a folder, e.g. "MyESPCam". I used the actual micropython master branch (between v1.23 and before 1.24).
- You will have to add the ESP32-Camera driver (I used v2.0.12). To do this, add the following to the respective idf_component.yml file (e.g. in micropython/ports/esp32/main_esp32s3/idf_component.yml):
espressif/esp32-camera:
git: https://github.com/espressif/esp32-camera
Note: Im am trying to figure out a more elegant way to do this.
To make things easier, add the following lines to your board config-file "mpconfigboard.h" with the respective pins and camera parameters. Otherwise you will need to pass all parameters during construction. Don't forget the empty line at the buttom. Example for xiao sense:
#define MICROPY_CAMERA_PIN_D0 (15)
#define MICROPY_CAMERA_PIN_D1 (17)
#define MICROPY_CAMERA_PIN_D2 (18)
#define MICROPY_CAMERA_PIN_D3 (16)
#define MICROPY_CAMERA_PIN_D4 (14)
#define MICROPY_CAMERA_PIN_D5 (12)
#define MICROPY_CAMERA_PIN_D6 (11)
#define MICROPY_CAMERA_PIN_D7 (48)
#define MICROPY_CAMERA_PIN_PCLK (13)
#define MICROPY_CAMERA_PIN_VSYNC (38)
#define MICROPY_CAMERA_PIN_HREF (47)
#define MICROPY_CAMERA_PIN_XCLK (10)
#define MICROPY_CAMERA_PIN_PWDN (-1)
#define MICROPY_CAMERA_PIN_RESET (-1)
#define MICROPY_CAMERA_PIN_SIOD (40)
#define MICROPY_CAMERA_PIN_SIOC (39)
#define MICROPY_CAMERA_XCLK_FREQ (20000000)
#define MICROPY_CAMERA_FB_COUNT (2)
#define MICROPY_CAMERA_JPEG_QUALITY (10)
#define MICROPY_CAMERA_GRAB_MODE (1)
To build the project, you could do it the following way:
$ . <path2esp-idf>/esp-idf/export.sh
$ cd MyESPCam/micropython/ports/esp32
$ make USER_C_MODULES=../../../../mp_camera/src/micropython.cmake BOARD=<Your-Board> clean
$ make USER_C_MODULES=../../../../mp_camera/src/micropython.cmake BOARD=<Your-Board> submodules
$ make USER_C_MODULES=../../../../mp_camera/src/micropython.cmake BOARD=<Your-Board> all
if you experience problems, visit MicroPython external C modules.
from camera import Camera, GrabMode, PixelFormat, FrameSize, GainCeiling
# Camera construction and initialization
camera = Camera(
data_pins=[1,2,3,4,5,6,7,8],
vsync_pin=9,
href_pin=10,
sda_pin=11,
scl_pin=12,
pclk_pin=13,
xclk_pin=14,
xclk_freq=20000000,
powerdown_pin=-1,
reset_pin=-1,
pixel_format=PixelFormat.RGB565,
frame_size=FrameSize.QVGA,
jpeg_quality=15,
fb_count=1,
grab_mode=GrabMode.WHEN_EMPTY
)
#Camera construction using defaults (if you specified them in mpconfigboard.h)
camera = Camera()
# Capture image
img = camera.capture()
# Camera reconfiguration
camera.reconfigure(pixel_format=PixelFormat.JPEG,frame_size=FrameSize.QVGA,grab_mode=GrabMode.LATEST, fb_count=2)
camera.set_quality(10)
You can get and set sensor properties by the respective methods (e.g. camera.get_brightness() or camera.set_vflip(True). See autocompletitions in Thonny in order to see the list of methods. If you want more insides in the methods and what they actually do, you can find a very good documentation here. Notice that for the methods in here you need to prefix a get/set, depending that you want to do.