How-To Section

1. Setting up SaltStack Environment

1.1 Install salt-master

On the master machine execute the following to install the salt-master package:

sudo apt-get update && \
sudo apt-get upgrade -y && \
sudo add-apt-repository ppa:saltstack/salt -y && \
sudo apt-get update && \
sudo apt-get upgrade -y && \
sudo apt-get install salt-master -y

1.2 Configure salt-master

Clone the salt-openstack cloudbase git repository:

git clone https://github.com/cloudbase/salt-openstack.git

Inside the repository, two folders are found:

pillar_root - contains states with parameters needed for OpenStack;
file_root - contains states, which upon execution on the minion, it will install necessary packages and do the needed configurations.

Add / Update the following configuration options in /etc/salt/master

pillar_roots:
  openstack:
    - <absolute_path_to_pillar_root>
file_roots:
  openstack:
    - <absolute_path_to_file_root>
jinja_trim_blocks: True
jinja_lstrip_blocks: True

Restart the salt-master service:

sudo service salt-master restart

1.3 Install salt-minion(s)

On the minion machine(s) execute execute the following to install the salt-minion package:

sudo apt-get update && \
sudo apt-get upgrade -y && \
sudo add-apt-repository ppa:saltstack/salt -y && \
sudo apt-get update && \
sudo apt-get upgrade -y && \
sudo apt-get install salt-minion -y

1.4 Configure salt-minion(s)

As a requirement for OpenStack, Network Manager service must be disabled and salt-minion(s) must not depened on it.

It is recommended to change the minion’s id since any machine identification in SaltStack is based on the minion id, thus needed for deploying OpenStack. Minion id defaults to the FQDN of that machine.

Edit /etc/salt/minion_id and change the default value.

Add the salt-master ip address to /etc/salt/minion conf file by executing the following command:

sudo sh -c "echo 'master: <master_ip_address>' >> /etc/salt/minion"

Execute the following commands to enable logging to a file and debug level:

sudo sh -c "echo 'log_file: /var/log/salt/minion' >> /etc/salt/minion"
sudo sh -c "echo 'log_level_logfile: debug' >> /etc/salt/minion"

Restart the salt-minion service:

sudo service salt-minion restart

Instructions on how to set up Salt on a different operating system can be found at this link: http://docs.saltstack.com/en/latest/topics/installation/

1.5 Establish connectivity between salt-master and salt-minion

At this point minion machine tries to connect the the master machine. In order to allow this connection, the minion key has to be accepted by the master. On the master machine, execute the following command:

sudo salt-key -a '<minion_id>' -y

Execute sudo salt-key -L on master machine and the following output is given:

Accepted Keys:
<minion_id>
Denied Keys:
Unaccepted Keys:
Rejected Keys:

It means that the minion with the id <minion_id> is connected to the master.

Test the master - minion connectivity by trying to ping the minion machine from the master. On the salt master execute:

sudo salt '<minion_id>' test.ping

The following output is given:

'<minion_id>':
    True

This means that the minion machine successfully connected to the master machine.

2. Configure OpenStack parameters

Each OpenStack must have its own folder in the pillar_root with the necessary configurations. There is already a default_template folder in pillar_root with the skeleton of the pillar data, that each OpenStack environment must have set up.

On the master machine, change directory to pillar_root. Duplicate the folder default_template and give it the name of a new OpenStack environment that it will be created. Inside the pillar_root folder execute the following command:

cp -rf default_template <openstack_environment_name>

The following files from <openstack_environment_name> folder have to be edited before deploying OpenStack:

credentials.sls (passwords and keystone related data)
environment.sls (OpenStack environment information)
networking.sls (OpenStack networking configuration)

As official OpenStack documentation recommends, strong passwords and tokens can be generated using: openssl rand -hex 10

For each file inside <openstack_environment_name> folder from pillar_root, edit the following configurations and leave the other options to the default value.

2.1 Edit credentials.sls file

Password used by the MySQL root user
```
  mysql:root_password
```
RabbitMQ user used by the OpenStack services
```
  rabbitmq:user_name
```
Password used by the RabbitMQ user
```
  rabbitmq:user_password
```
MySQL database password for each OpenStack service
```
  databases:<service_name>:password
```

Databases section inside credentials.sls contains information about the database of each service within OpenStack. Six services are available to be installed with the current SaltStack scripts: nova, keystone, cinder, glance, neutron and heat. Edit the password for each one of them.

Metadata token used by neutron
```
  neutron:metadata_secret
```
Admin token used by keystone service
```
  keystone:admin_token
```

The password used by each tenant user

  keystone:tenants:<tenant_name>:users:<user_name>:password

The tenants section under keystone contains information about the tenants and users to be created. The template contains only admin and service tenants. You can define more tenants and users to be created here. Use the following structure:

    <tenant_name>: 
      users: 
        <user1_name>: 
          password: "<user1_password"
          roles:
            - "<user1_role>"
          email: "<user1_email>"
          keystonerc:
            create: <True/False>
            path: <keystonerc_path>
        <user2_name>: 
          password: "<user2_password"
          roles:
            - "<user2_role>"
          email: "<user2_email>"
          keystonerc:
            create: <True/False>
            path: <keystonerc_path>

2.2 Edit environment.sls file

OpenStack environment name
```
  environment_name
```

The environment is recommended to be named as the folder with the pillar data.

OpenStack series
```
  openstack_series
```

The OpenStack series which will be installed. At the moment only: juno, icehouse and kilo.

Reset type to be applied on the targeted minion(s)
```
  reset
```

Reset feature is used to remove or reconfigure a previously deployed OpenStack environment. This parameter accepts one of the following values: hard or soft, depending on the required reset type.

Reset types details:

hard reset: It should be used when a previously deployed OpenStack is broken / nonfunctional.

WARNING: Hard reset states will purge all OpenStack packages and their dependencies (MySQL, RabbitMQ, OpenvSwitch, Apache and Memcached). This MUST not be used if there are, on the minion, other services using these dependencies.
soft reset: It should be used when a previously deployed OpenStack is functional (all OpenStack services are up and running) and only reconfiguration is needed (based on the new pillar parameters).

WARNING:
- Soft reset states will NOT run, if all OpenStack services are not running.
- Soft reset states will execute commands on the controller node that will delete (from every tenant) the following elements: heat stacks, cinder volumes, nova instances, neutron networks / subnets / routers, glance images, etc.

NOTE: Reset feature will not reconfigure single NIC Openstack environment to multi-NIC OpenStack environment.

Boolean value to indicate whether all OpenStack services are set into debug and verbose mode:
```
  debug_mode
```
Boolean value which indicates whether system upgrade will be performed or not:
```
  system_upgrade
```
OpenStack nodes

Add the management ip address of all your OpenStack nodes under the hosts section. Use the following structure:

    hosts:
      "<minion_id>": "<management_ip_address>"

Mapping between roles and minion ids
```
  <role_name>:<minion_ids>
```

Add every minion id under the role you want that minion to have. There are four roles defined with the following names: controller, network, storage and compute.

When you define the nodes for each role use the following structure:

    controller: "<minion_id>"
    network: "<minion_id>"
    compute: 
      - "<minion_id_1>"
      - "<minion_id_2>"
    storage:
      - "<minion_id_1>"
      - "<minion_id_2>"

There is:

One to one mapping between the roles controller, network and minions;
One to many mapping between the roles compute, storage and minions.
Value of the total cinder volumes group size given in gigabytes.
```
  cinder:volumes_group_size
```
Value of the nova cpu allocation ratio configuration (defaults to 16).
```
  nova:cpu_allocation_ratio
```
Value of the nova ram allocation ratio configuration (defaults to 1.5).
```
  nova:ram_allocation_ratio
```
Custom glance images.
```
  glance:images
```

Add custom images that you want to upload to glance here. Use the following structure:

    <image_name>:
      user: "<user_name>"
      tenant: "<tenant_name>"
      parameters:
        min_disk: "<minimum_needed_disk_in_gigabytes>"
        min_ram: "<minimum_needed_ram_in_megabytes>"
        copy_from: "<image_url>"
        disk_format: "<raw,vhd,vmdk,vdi,iso,qcow2,aki,ari,ami>"
        container_format: "<bare,ovf,aki,ari,ami,ova>"
        is_public: "<True/False>"
        protected: "<True/False>"

After glance is installed, the image is downloaded from the given <image_url> and uploaded to glance into the tenant <tenant_name> using the user with username <user_name>.

2.3 Edit networking.sls file

Name of bridge used for external network traffic.
```
  neutron:external_bridge
```
Boolean value to enable / disable single NIC OpenStack deployment. This must be used only for all-in-one OpenStack deployments.
```
  single_nic:enable
```

In case this value is set to True, br-proxy needs to be set up as it is needed for single NIC OpenStack. Configuration is made and after the OpenStack deployment is done, networking service just needs to be restarted to have this set up.

NOTE: Due to a bug on Ubuntu 14.04 that networking service cannot be stopped / restarted, a bash script is created to set br-proxy up. At the end of salt-scripts execution, it can be found on the salt-minion at the default location /root/set-br-proxy.sh.

Name of the network interface used in the single NIC OpenStack deployment.
```
  single_nic:interface
```

Openvswitch physnets mappings.

  neutron:type_drivers:<network_type>:physnets

The physnet is a mapping between an arbitrary name and the network bridge from specified minion machine. Configuration is made that will map the arbitrary name with the network bridge. Current saltstack scripts support the following network types: vxlan, vlan, gre and flat.

Add flat, vxlan or gre physnets under neutron:type_drivers:<flat/vxlan/gre>:physnets section using the following structure:

    <physnet_name>: 
      bridge: "<bridge_name>"
      hosts:
        <minion_id>: "<interface_name>"

Add vlan physnets under neutron:type_drivers:vlan:physnets section using the following structure:

    <physnet_name>: 
      bridge: "<bridge_name>"
      vlan_range: "<start_vlan>:<end_vlan>"
      hosts:
        <minion_id>: "<interface_name>"

Boolean flag to enable tunneling for OpenStack
```
  neutron:tunneling:enable
```
The following settings will be applied only if neutron:tunneling:enable is set to True
- Neutron tunnel types. Array with the tunnel types that must be enabled for neutron. Valid elements are: gre or vxlan.
```
  neutron:tunneling:types
```
- VXLAN and GRE tunnels definitions
  
  VXLAN tunnels can be defined under neutron:type_drivers:vxlan:tunnels section using the following structure:
```
  tunnels:
    <tunnel_name>:
      tunnel_id_ranges: "<start_tunnel_id>:<end_tunnel_id>"
```
  VXLAN multicast group address
```
  neutron:type_drivers:vxlan:vxlan_group
```
  GRE tunnels can be defined under neutron:type_drivers:gre:tunnels section using the following structure:
```
  tunnels:
    <tunnel_name>:
      tunnel_id_ranges: "<start_tunnel_id>:<end_tunnel_id>"
```
Initial networks to be created within OpenStack
```
  neutron:networks:<network_name>
```

In the network definition you also have to specify the subnets. Define networks under neutron:networks section with the following structure:

    <network_name>:
      user: <user_name>
      tenant: <tenant_name>
      provider_physical_network: <physnet_name>
      provider_network_type: <network_type>
      shared: <True/False>          # It can be omitted and it defaults to False
      admin_state_up: <True/False>  # It can be omitted and it defaults to True
      router_external: <True/False> # It can be omitted and it defaults to False
      subnets:
        <subnet_name>:
          cidr: '<cidr>'
          allocation_pools:
            - start: '<start_ip>'
              end: '<end_ip>'
          enable_dhcp: <True/False> # It can be omitted and it defaults to True
          dns_nameservers:          # List of dns nameservers and it can be omitted
            - '8.8.8.8'

Initially created OpenStack routers
```
  neutron:routers:<router_name>
```

Add them under the neutron:routers section and use the following structure:

    routers:
      <router_name>:
        user: <user_name>
        tenant: <tenant_name>
        interfaces:         # list of subnets that will be connected to the router
          - <subnet_name_1>
          - <subnet_name_2>
        gateway_network: <network_name>

Initially created OpenStack security groups

  neutron:security_groups:<group_name>

Add them under neutron:security_groups section and use the following structure:

    <security_group_name>:
      user: <user_name>
      tenant: <tenant_name>
      description: '<short_description>'
      rules:
        - direction: "<egress/ingress>"
          ethertype: "<IPv4/IPv6>"
          protocol: "<icmp/tcp/udp>"
          port_range_min: "<start_port>"
          port_range_max: "<end_port>"
          remote_ip_prefix: "<cidr>"

NOTE: OpenStack pillar configuration samples can be found inside samples from pillar_root. Examples on how to configure OpenStack using: single_nic, vxlan networking, vlan networking or gre networking are given.

3. Install OpenStack

OpenStack parameters are configured and the environment is ready to be installed. Before running salt to install it, on the salt-master machine, edit top.sls file from pillar_root.

Top file determines which are the minions that will have OpenStack parameters available.

openstack: 
  "<minion_id_1>,<minion_id_2>":
    - match: list
    - {{ grains['os'] }}
    - <openstack_environment_name>.credentials
    - <openstack_environment_name>.environment
    - <openstack_environment_name>.networking

At line two from top.sls file, you specify the targeted minions. Give them as a comma separated list.

IMPORTANT: Here, you must specify only the minions ids defined in the environment.sls file at hosts section.

Also replace <openstack_environment_name> with the name of the folder from pillar_root that contains the OpenStack parameters.

OpenStack environment is ready to be installed.

On the salt master machine execute the following commands:

sudo salt -L '<minion_id_1>,<minion_id_2>' saltutil.refresh_pillar
# It will make the OpenStack parameters available on the targeted minion(s).

sudo salt -L '<minion_id_1>,<minion_id_2>' saltutil.sync_all
# It will upload all of the custom dynamic modules to the targeted minion(s). 
# Custom modules for OpenStack (network create, router create, security group create, etc.) have been defined.

Replace <environment_name> with the name of the OpenStack environment as defined in environment.sls file and run the following command:

sudo salt -C 'I@environment_name:<environment_name>' state.highstate
# It will install the OpenStack environment

At the end of the command execution, the following output is given:

Summary
--------------
Succeeded: <total_states> (changed=<states_caused_changes>)
Failed:      <failed_states>
--------------
Total states run:     <total_states>

A total number of <total_states> have been executed and <states_caused_changes> produced any change during the OpenStack installation.

<failed_states> should be zero. In case it is higher than zero, check the logs on the minion(s) for errors details.

OpenStack is installed using SaltStack. Horizon dashboard can be accessed at the URL:

http://<controller_ip_address>/dashboard

How-To Section

1. Run the SaltStack OpenStack states on a masterless minion

For scenarios when just a single OpenStack all-in-one is needed, it is prefered to run the salt-scripts locally on a masterless minion machine.

Steps on how to install and configure masterless minion machine:

Install and configure a simple minion machine following instructions from section 1.3 and section 1.4.
Instruct the minion to not look for a master machine when searching for file_root and pillar_root folders. This way, it searches locally for the salt-openstack states.
```
sudo sh -c "echo 'file_client: local' >> /etc/salt/minion"
```

Clone the salt-openstack cloudbase git repository:

git clone https://github.com/cloudbase/salt-openstack.git

Add / Update the following configuration options in /etc/salt/minion.

pillar_roots:
  openstack:
    - <absolute_path_to_pillar_root>
file_roots:
  openstack:
    - <absolute_path_to_file_root>
jinja_trim_blocks: True
jinja_lstrip_blocks: True

Stop the salt-minion daemon. Otherwise the minion attempts to connect to a master and it will fail.
```
sudo service salt-minion stop
```
Follow instructions from section 2 and set up OpenStack parameters, but on the masterless minion instead on the master machine.
Set up top.sls file from pillar_root as described at the beginning of the section 3. The masterless minion is the only one targeted when running the salt-openstack scripts.

Run the salt-scripts commands as described in section 3, but this time locally:

sudo salt-call --local saltutil.refresh_pillar
sudo salt-call --local saltutil.sync_all
sudo salt-call --local state.highstate

OpenStack all-in-one is now installed on the masterless salt-minion machine.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

1. Setting up SaltStack Environment

1.1 Install salt-master

1.2 Configure salt-master

1.3 Install salt-minion(s)

1.4 Configure salt-minion(s)

1.5 Establish connectivity between salt-master and salt-minion

2. Configure OpenStack parameters

2.1 Edit credentials.sls file

2.2 Edit environment.sls file

2.3 Edit networking.sls file

3. Install OpenStack

How-To Section

1. Run the SaltStack OpenStack states on a masterless minion

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 37 Commits
file_root		file_root
pillar_root		pillar_root
README.md		README.md

chekolyn/salt-openstack

Folders and files

Latest commit

History

Repository files navigation

1. Setting up SaltStack Environment

1.1 Install salt-master

1.2 Configure salt-master

1.3 Install salt-minion(s)

1.4 Configure salt-minion(s)

1.5 Establish connectivity between salt-master and salt-minion

2. Configure OpenStack parameters

2.1 Edit credentials.sls file

2.2 Edit environment.sls file

2.3 Edit networking.sls file

3. Install OpenStack

How-To Section

1. Run the SaltStack OpenStack states on a masterless minion

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages