- ZigBee协议实现的WSN，由ZigBee协议的传感节点组成，完成数据采集、处理、上传，执行控制命令。项目文件
- JavaWeb实现的服务端，由RS232通信，数据解析，持久化层，面向移动终端的Web通信等模块组成。web部分包括了HTTP及XMPP协议的推送服务。项目文件
- Android平台上的WSN监控软件。项目文件
- 兼容TI CC2530DK的所有CC2530评估板上
- 运行ZigBee协议协议栈Z-Stack协议栈的CC2530芯片节点
- 构建于基于ZigBee协议实现的Z-Stack协议栈上，在AP层上实现所有功能逻辑。
- 熟悉IAR以及Z-Stack协议栈忽略该部分
- 在IAR Embedd Workbench ID编译调试<br / >
- 用IAR 打开..\WSNMonitorApp\CC2530DB 目录中的WSNMonitorApp.eww项目文件，右键项目名option中找到C/C++Compile中
的preprocessor选项，将addtional include dir的选项框中根据项目文件在文件系统中的目录位置，导入Z-Stack的其他层的源文件。
如果直接在pull到源码文件中打开WSNMonitorApp.eww并没有改动过默认的目录结构，就在选项框中直接贴入下面的文件结构即可：<br / >
$PROJ_DIR$ <br / >$PROJ_DIR$ \..\SOURCE$PROJ_DIR$ \..\ZMAIN\TI2530DB$PROJ_DIR$ \..\COMPONENTS\MT$PROJ_DIR$ \..\COMPONENTS\HAL\INCLUDE$PROJ_DIR$ \..\COMPONENTS\HAL\TARGET\CC2530EB$PROJ_DIR$ \..\COMPONENTS\OSAL\MCU\CCSOC$PROJ_DIR$ \..\COMPONENTS\OSAL\INCLUDE$PROJ_DIR$ \..\COMPONENTS\STACK\AF$PROJ_DIR$ \..\COMPONENTS\STACK\NWK$PROJ_DIR$ \..\COMPONENTS\STACK\SEC$PROJ_DIR$ \..\COMPONENTS\STACK\SAPI$PROJ_DIR$ \..\COMPONENTS\STACK\SYS$PROJ_DIR$ \..\COMPONENTS\STACK\ZDO$PROJ_DIR$ \..\COMPONENTS\ZMAC\F8W$PROJ_DIR$ \..\COMPONENTS\ZMAC$PROJ_DIR$ \..\COMPONENTS\SERVICES\SADDR$PROJ_DIR$ \..\COMPONENTS\SERVICES\SDATA$PROJ_DIR$ \..\COMPONENTS\MAC\INCLUDE$PROJ_DIR$ \..\COMPONENTS\MAC\HIGH_LEVEL$PROJ_DIR$ \..\�COMPONENTS\MAC\LOW_LEVEL\srf04$PROJ_DIR$ \..\COMPONENTS\MAC\LOW_LEVEL\srf04\SINGLE_CHIP - 编译宏<br / > ZTOOL_P1<br / > MT_TASK<br / > MT_SYS_FUNC<br / > MT_ZDO_FUNC<br / > LCD_SUPPORTED=DEBUG
- 之后在IAR workspace下方选择对应节点类型的项目文件，完成编译后， 通过debug按钮使用CC Debugger就能将程序烧写进对应节点硬件平台。
- ZigBee协议所规定三种不同类型节点的基础功能 (默认你已了解ZigBee协议和Z-Stack协议栈)
- EndDevice节点实现了DS18B20传感器的环境温度获取，处理，报告及报告周期设置，报警温度设置，开关控制等。
- 通信功能，RS232，点对点，组播，广播。
- 其他功能参考源码。
/***************************************************************************************************
Filename: MTEL.c
Revised:
Description: MonitorTest Event Loop functions. Everything in the MonitorTest Task (except the serial driver).
Copyright 2007 Texas Instruments Incorporated. All rights reserved.
IMPORTANT: Your use of this Software is limited to those specific rights granted under the terms of a software license agreement between the user who downloaded the software, his/her employer (which must be your employer) and Texas Instruments Incorporated (the "License"). You may not use this Software unless you agree to abide by the terms of the License. The License limits your use, and you acknowledge, that the Software may not be modified, copied or distributed unless embedded on a Texas Instruments microcontroller or used solely and exclusively in conjunction with a Texas Instruments radio frequency transceiver, which is integrated into your product. Other than for the foregoing purpose, you may not use, reproduce, copy, prepare derivative works of, modify, distribute, perform, display or sell this Software and/or its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE PROVIDED “AS IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
Should you have any questions regarding your right to use this Software, contact Texas Instruments Incorporated at www.TI.com.
***************************************************************************************************/
- Win7 32bit
- JDK 1.6.0_24
- JavaEE 6
- Tomcat7.0 for win32
- [Mysql 5.0+ for win32] (http://dev.mysql.com/downloads/mysql/5.6.html)
- Struts2 v2.2 、Spring v2.5、Hibernate v3.3、Androidpn
- 首先要完成这部分配置！
- 与WSN进行RS232通信,由于使用Java实现，windows中运行Java 串口通信，先进行配置。
RXTX包下载地址：http://rxtx.qbang.org/pub/rxtx/rxtx-2.1-7-bins-r2.zip
下载解压后，其配置环境如下：
把下载包中rxtx-2.1-7-bins-r2\Windows\i368-mingw32\rxtxSerial.dll 放到你%java_home%\jre\bin下面（%java_home%\jre\bin\rxtxSerial.dll）和C:\Windows\System32下面(C:\Windows\System32\rxtxSerial.dll)
下载包中rxtx-2.1-7-bins-r2\RXTXcomm.jar放到%java_home%\jre\lib\ext下面(%java_home%\jre\lib\ext\RXTXcomm.jar)
注：%java_home%为你安装JDK的路径，如：C:\Program Files\Java\jdk1.6.0_23
- web部分所需要的框架 jar包 都已经包含在了webroot/WEB-INF/lib目录下。
- 在%Tomcat HOME%\conf中server.xml文件Host标签增加Context子标签如： <Context path="/wsnmonitor" docBase="..\WSNServicePlatform\WebRoot" reloadable="true"/>。
- path属性表示浏览器中的访问路径，docBase属性表示项目文件在文件系统中的目录。
- 运行%Tomcat HOME%\bin中startup.bat启动tomcat,如果在command line 中打印出该服务端的启动日志，并可以访问http://127.0.0.1:8080/wsnmonitor/index.do,则部署成功。
- 基于Androidpn框架的XMPP协议的推送服务通过整合也部署在Tomcat里
- Hibernate ORM构建的持久层，数据库表会在首次启动服务端程序时自动构建，可以在Spring配置文件中修改
- 与WSN里协调器通过RS232数据交换
- 对数据进行解析，并持久化到数据库里
- HTTP 接受来自Android终端的数据请求，并返回对应数据。
- XMPP服务保持与Aandroid终端的持久连接，将WSN中解析到的紧急数据(可设定)实时推送给终端。
- 更多参见源码
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. http://fsf.org/
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
- Android 2.2及以上
libs
├ fastjson.jar
├ ormlite-android-4.41
├ ormlite-core-4.41
├ universal-image-loader-1.7.0-with-src.jar
- 根据服务端的ip，修改URL
- WSN数据，节点信息查询
- 实时拓扑结构变化查看
- 节点控制
- 推送消息接收等功能
- 推送规则设置
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. http://fsf.org/
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.