This is the software for Bugblat's PIF_2 Raspberry Pi FPGA board.
The PIF_2 is 100% compatible with all Pi boards with a 40-pin connector - all reasonably recent Raspberry Pi models. It is bigger than the very small Pi Zero, a PIF_Z could be a better solution for that Pi model.
A pif board, which plugs into a Raspberry Pi, carries a non-volatile Lattice Semiconductor MachXO2 FPGA.
To program the FPGA, you start by writing a firmware program, usually in VHDL or Verilog though there are other options. The firmware program can be simulated and compiled to a JEDEC bitstream with Lattice's free Diamond software.
Then you have to inject the bitstream into the pif's FPGA, and that's the job of the software in this repo. Primarily in Python, there are programs to
- program the onboard FPGA with a compiled bitstream
- control the FPGA firmware from the Raspberry Pi processor
Example FPGA firmware programs are also included, plus an example of controlling the FPGA from a web application.
Many flavors of Linux are available for the Raspberry Pi. This software is written for the Raspbian/jessie distribution.
The pif product pages, including links to the full documentation, are here.