build(deps): bump the dev-dependencies group across 1 directory with 3 updates

[dependabot]

Updates the requirements on hypothesis, ruff and coverage to permit the latest version.
Updates hypothesis to 6.121.0

Release notes

Sourced from hypothesis's releases.

Hypothesis for Python - version 6.121.0

This release adds "BackgroundWriteDatabase", a new database backend which defers writes on the wrapped database to a background thread. This allows for low-overhead writes in performance-critical environments like fuzz_one_input.

The canonical version of these notes (with links) is on readthedocs.

Commits

• c274b1e Bump hypothesis-python version to 6.121.0 and update changelog
• 65bd569 Merge pull request #4188 from tybug/background-db
• c078ef1 reword and fix docs
• 6f57508 Merge branch 'master' into background-db
• 79ca435 reword, skip emscripten test
• 32817c5 Bump hypothesis-python version to 6.120.0 and update changelog
• bb098c7 deflake stateful test
• 12072f4 add BackgroundWriteDatabase
• 89d58f2 Merge pull request #4186 from tybug/smaller-examples-batch
• b5b08c1 remove hard small cap lower bound
• Additional commits viewable in compare view

Updates ruff to 0.8.0

Release notes

Sourced from ruff's releases.

0.8.0

Release Notes

Check out the blog post for a migration guide and overview of the changes!

Breaking changes

See also, the "Remapped rules" section which may result in disabled rules.

• Default to Python 3.9

  Ruff now defaults to Python 3.9 instead of 3.8 if no explicit Python version is configured using ruff.target-version or project.requires-python (#13896)

• Changed location of pydoclint diagnostics

  pydoclint diagnostics now point to the first-line of the problematic docstring. Previously, this was not the case.

  If you've opted into these preview rules but have them suppressed using noqa comments in some places, this change may mean that you need to move the noqa suppression comments. Most users should be unaffected by this change.

• Use XDG (i.e. ~/.local/bin) instead of the Cargo home directory in the standalone installer

  Previously, Ruff's installer used $CARGO_HOME or ~/.cargo/bin for its target install directory. Now, Ruff will be installed into $XDG_BIN_HOME, $XDG_DATA_HOME/../bin, or ~/.local/bin (in that order).

  This change is only relevant to users of the standalone Ruff installer (using the shell or PowerShell script). If you installed Ruff using uv or pip, you should be unaffected.

• Changes to the line width calculation

  Ruff now uses a new version of the unicode-width Rust crate to calculate the line width. In very rare cases, this may lead to lines containing Unicode characters being reformatted, or being considered too long when they were not before (E501).

Removed Rules

The following deprecated rules have been removed:

• missing-type-self (ANN101)
• missing-type-cls (ANN102)
• syntax-error (E999)
• pytest-missing-fixture-name-underscore (PT004)
• pytest-incorrect-fixture-name-underscore (PT005)
• unpacked-list-comprehension (UP027)

Remapped rules

The following rules have been remapped to new rule codes:

• flake8-type-checking: TCH to TC

Stabilization

... (truncated)

Changelog

Sourced from ruff's changelog.

0.8.0

Check out the blog post for a migration guide and overview of the changes!

Breaking changes

See also, the "Remapped rules" section which may result in disabled rules.

• Default to Python 3.9

  Ruff now defaults to Python 3.9 instead of 3.8 if no explicit Python version is configured using ruff.target-version or project.requires-python (#13896)

• Changed location of pydoclint diagnostics

  pydoclint diagnostics now point to the first-line of the problematic docstring. Previously, this was not the case.

  If you've opted into these preview rules but have them suppressed using noqa comments in some places, this change may mean that you need to move the noqa suppression comments. Most users should be unaffected by this change.

• Use XDG (i.e. ~/.local/bin) instead of the Cargo home directory in the standalone installer

  Previously, Ruff's installer used $CARGO_HOME or ~/.cargo/bin for its target install directory. Now, Ruff will be installed into $XDG_BIN_HOME, $XDG_DATA_HOME/../bin, or ~/.local/bin (in that order).

  This change is only relevant to users of the standalone Ruff installer (using the shell or PowerShell script). If you installed Ruff using uv or pip, you should be unaffected.

• Changes to the line width calculation

  Ruff now uses a new version of the unicode-width Rust crate to calculate the line width. In very rare cases, this may lead to lines containing Unicode characters being reformatted, or being considered too long when they were not before (E501).

Removed Rules

The following deprecated rules have been removed:

• missing-type-self (ANN101)
• missing-type-cls (ANN102)
• syntax-error (E999)
• pytest-missing-fixture-name-underscore (PT004)
• pytest-incorrect-fixture-name-underscore (PT005)
• unpacked-list-comprehension (UP027)

Remapped rules

The following rules have been remapped to new rule codes:

• flake8-type-checking: TCH to TC

Stabilization

... (truncated)

Commits

• a90e404 [red-knot] PEP 695 type aliases (#14357)
• 8358ad8 Ruff 0.8 release (#14486)
• 2b8b1ef Improve docs for some pycodestyle rules (#14517)
• 2efa3fb [flake8-import-conventions] Syntax check aliases supplied in configuration ...
• b9da430 doc(B024): #14455 add annotated but unassgined class variables (#14502)
• 87043a2 Limit type size assertion to 64bit (#14514)
• f684b6f [red-knot] Fix: Infer type for typing.Union[..] tuple expression (#14510)
• 47f39ed [red-knot] Meta data for Type::Todo (#14500)
• aecdb8c [red-knot] support typing.Union in type annotations (#14499)
• 3c52d2d Improve the performance of the formatter instability check job (#14471)
• Additional commits viewable in compare view

Updates coverage to 7.6.8

Changelog

Sourced from coverage's changelog.

Version 7.6.8 — 2024-11-23

• Fix: the LCOV report code assumed that a branch line that took no branches meant that the entire line was unexecuted. This isn't true in a few cases: the line might always raise an exception, or might have been optimized away. Fixes issue 1896_.

• Fix: similarly, the HTML report will now explain that a line that jumps to none of its expected destinations must have always raised an exception. Previously, it would say something nonsensical like, "line 4 didn't jump to line 5 because line 4 was never true, and it didn't jump to line 7 because line 4 was always true." This was also shown in issue 1896_.

.. _issue 1896: nedbat/coveragepy#1896

.. _changes_7-6-7:

Version 7.6.7 — 2024-11-15

• Fix: ugh, the other assert from 7.6.5 can also be encountered in the wild, so it's been restored to a conditional. Sorry for the churn.

.. _changes_7-6-6:

Version 7.6.6 — 2024-11-15

• One of the new asserts from 7.6.5 caused problems in real projects, as reported in issue 1891_. The assert has been removed.

.. _issue 1891: nedbat/coveragepy#1891

.. _changes_7-6-5:

Version 7.6.5 — 2024-11-14

• Fix: fine-tuned the exact Python version (3.12.6) when exiting from with statements changed how they traced. This affected whether people saw the fix for issue 1880_.

• Fix: isolate our code more from mocking in the os module that in rare cases can cause bizarre behavior <pytest-cov-666_>_.

• Refactor: some code unreachable code paths in parser.py were changed to

... (truncated)

Commits

• 6134266 docs: sample HTML for 7.6.8
• 041f963 docs: prep for 7.6.8
• 7fe48b6 build: don't search generated report files
• f219144 docs: start changelog entries with capital letters
• d1a916a fix: a line that branches nowhere must always raise an exception
• 2ace7a2 fix: don't assume 'no branches' means 'not executed' #1896
• 3ed5915 style: all of ci should use underscores
• 0db86f2 build: automate updating readthedocs
• 2a89551 chore: make upgrade (not sure why files became absolute)
• ba9c157 chore: make doc_upgrade
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

Summary by Sourcery

Build:

• Update dev-dependencies in pyproject.toml to allow the latest versions of hypothesis, ruff, and coverage.

[sourcery-ai]

Reviewer's Guide by Sourcery

This PR updates three development dependencies in the project's pyproject.toml file. The changes involve updating the version constraints for hypothesis, ruff, and coverage packages to allow for their latest versions while maintaining the lower bounds.

No diagrams generated as the changes look simple and do not need a visual representation.

File-Level Changes

Change	Details	Files
Update version constraints for development dependencies	Update hypothesis upper bound from 6.119.1 to 6.121.0 Update ruff upper bound from 0.7.4 to 0.8.0 Update coverage upper bound from 7.6.7 to 7.6.8	pyproject.toml

---

Tips and commands

Interacting with Sourcery

• Trigger a new review: Comment @sourcery-ai review on the pull request.
• Continue discussions: Reply directly to Sourcery's review comments.
• Generate a GitHub issue from a review comment: Ask Sourcery to create an
  issue from a review comment by replying to it.
• Generate a pull request title: Write @sourcery-ai anywhere in the pull
  request title to generate a title at any time.
• Generate a pull request summary: Write @sourcery-ai summary anywhere in
  the pull request body to generate a PR summary at any time. You can also use
  this command to specify where the summary should be inserted.

Customizing Your Experience

Access your dashboard to:

• Enable or disable review features such as the Sourcery-generated pull request
  summary, the reviewer's guide, and others.
• Change the review language.
• Add, remove or edit custom review instructions.
• Adjust other review settings.

Getting Help

• Contact our support team for questions or feedback.
• Visit our documentation for detailed guides and information.
• Keep in touch with the Sourcery team by following us on X/Twitter, LinkedIn or GitHub.

[sourcery-ai]

We have skipped reviewing this pull request. Here's why:

• It seems to have been created by a bot (hey, dependabot[bot]!). We assume it knows what it's doing!
• We don't review packaging changes - Let us know if you'd like us to change this.