[bitnami/discourse] discourse helm chart

LICENSE

@@ -1,3 +1,4 @@
+Copyright (c) 2020 Paul Czarkowski <username.taken@gmail.com>
 Copyright (c) 2019 Bitnami
 
 Licensed under the Apache License, Version 2.0 (the "License");

bitnami/discourse/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

bitnami/discourse/Chart.yaml

@@ -0,0 +1,17 @@
+apiVersion: v2
+name: discourse
+description: A Helm chart for deploying Discourse to Kubernetes
+type: application
+version: 0.1.0
+appVersion: 2.4.1
+engine: gotpl
+home: https://www.discourse.org/
+icon: https://bitnami.com/assets/stacks/wordpress/img/discourse-stack-220x234.png
+sources:
+  - https://github.com/bitnami/bitnami-docker-discourse
+  - https://github.com/spinnaker
+maintainers:
+  - name: Bitnami
+    email: containers@bitnami.com
+  - name: paulczar
+  email: username.taken@gmail.com

bitnami/discourse/LICENSE

@@ -0,0 +1,13 @@
+Copyright 2020 Paul Czarkowski <username.taken@gmail.com>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

bitnami/discourse/README.md

@@ -0,0 +1,111 @@
+# Discourse
+
+[Discourse](https://www.discourse.org/) is an open source discussion platform. It can be used as a mailing list, discussion forum, long-form chat room, and more.
+
+## TL;DR;
+
+```console
+$ helm repo add bitnami https://charts.bitnami.com/bitnami
+$ helm install my-release bitnami/discourse
+```
+
+## Introduction
+
+This chart bootstraps a [Discourse](https://www.discourse.org/) deployment on a [Kubernetes](http://kubernetes.io) cluster using the [Helm](https://helm.sh) package manager.
+
+It also packages [Bitnami Postgresql](https://github.com/bitnami/charts/tree/master/bitnami/postgresql) and [Bitnami Redis](https://github.com/bitnami/charts/tree/master/bitnami/redis) which are required as a database for the Discourse application.
+
+Bitnami charts can be used with [Kubeapps](https://kubeapps.com/) for deployment and management of Helm Charts in clusters. This chart has been tested to work with NGINX Ingress, cert-manager, fluentd and Prometheus on top of the [BKPR](https://kubeprod.io/).
+
+## Prerequisites
+
+- Kubernetes 1.12+
+- Helm 2.11+ or Helm 3.0-beta3+
+- PV provisioner support in the underlying infrastructure
+- ReadWriteMany volumes for deployment scaling
+
+## Installing the Chart
+
+To install the chart with the release name `my-release`:
+
+```console
+$ helm install my-release bitnami/discourse
+```
+
+The command deploys Discourse on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
+
+> **Tip**: List all releases using `helm list`
+
+## Uninstalling the Chart
+
+To uninstall/delete the `my-release` deployment:
+
+```console
+$ helm delete my-release
+```
+
+The command removes all the Kubernetes components associated with the chart and deletes the release.
+
+## Parameters
+
+The following table lists the configurable parameters of the Discourse chart and their default values.
+
+| Parameter                          | Description                                           | Default                                                      |
+| ---------------------------------- | ----------------------------------------------------- | ------------------------------------------------------------ |
+**TBD after other patches get merged**
+
+The above parameters map to the env variables defined in [bitnami/discourse](https://github.com/bitnami/bitnami-docker-discourse). For more information please refer to the [bitnami/discourse](https://github.com/bitnami/bitnami-docker-discourse) image documentation.
+
+Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
+
+```console
+$ helm install my-release \
+  --set discourseUsername=admin,discoursePassword=password,mariadb.mariadbRootPassword=secretpassword \
+    bitnami/discourse
+```
+
+The above command sets the Discourse administrator account username and password to `admin` and `password` respectively. Additionally, it sets the MariaDB `root` user password to `secretpassword`.
+
+Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
+
+```console
+$ helm install my-release -f values.yaml bitnami/discourse
+```
+
+> **Tip**: You can use the default [values.yaml](values.yaml)
+
+## Configuration and installation details
+
+### [Rolling VS Immutable tags](https://docs.bitnami.com/containers/how-to/understand-rolling-tags-containers/)
+
+It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.
+
+Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.
+
+### Local development and binding to port 80
+
+Discourse is pretty insistent on giving access via port 80 or 443.
+This is fine if you're hosting it on a public cluster, but it's not while testing the chart locally.
+The easiest [but horribly insecure] way to do it is to simply allow kubectl to bind to privileged ports and then use a `port-forward`:
+
+```console
+sudo setcap CAP_NET_BIND_SERVICE=+eip $(which kubectl)
+kubectl portforward svc/discourse 80:3000
+```
+
+### Image
+
+The `image` parameter allows specifying which image will be pulled for the chart.
+
+#### Private registry
+
+If you configure the `image` value to one in a private registry, you will need to [specify an image pull secret](https://kubernetes.io/docs/concepts/containers/images/#specifying-imagepullsecrets-on-a-pod).
+
+1. Manually create image pull secret(s) in the namespace. See [this YAML example reference](https://kubernetes.io/docs/concepts/containers/images/#creating-a-secret-with-a-docker-config). Consult your image registry's documentation about getting the appropriate secret.
+2. Note that the `imagePullSecrets` configuration value cannot currently be passed to helm using the `--set` parameter, so you must supply these using a `values.yaml` file, such as:
+
+```yaml
+imagePullSecrets:
+  - name: SECRET_NAME
+```
+3. Install the chart

bitnami/discourse/requirements.lock

@@ -0,0 +1,9 @@
+dependencies:
+- name: postgresql
+  repository: https://charts.bitnami.com/bitnami
+  version: 8.6.4
+- name: redis
+  repository: https://charts.bitnami.com/bitnami
+  version: 10.5.11
+digest: sha256:a8c674729c5c688f9e3799891d47e04606888c6ab54d2fc2159b03644c322bd0
+generated: "2020-03-14T10:12:55.307197087-05:00"

bitnami/discourse/requirements.yaml

@@ -0,0 +1,9 @@
+dependencies:
+- name: postgresql
+  repository: https://charts.bitnami.com/bitnami
+  version: 8.6.4
+  condition: postgresql.enabled
+- name: redis
+  repository: https://charts.bitnami.com/bitnami
+  version: 10.5.11
+  condition: redis.enabled

bitnami/discourse/templates/NOTES.txt

@@ -0,0 +1,21 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ . }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "discourse.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "discourse.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "discourse.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "discourse.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:80 to use your application"
+  sudo kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 80:3000
+{{- end }}

bitnami/discourse/templates/_helpers.tpl

@@ -0,0 +1,63 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "discourse.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "discourse.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "discourse.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "discourse.labels" -}}
+helm.sh/chart: {{ include "discourse.chart" . }}
+{{ include "discourse.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "discourse.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "discourse.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
+
+{{/*
+Create the name of the service account to use
+*/}}
+{{- define "discourse.serviceAccountName" -}}
+{{- if .Values.serviceAccount.create -}}
+    {{ default (include "discourse.fullname" .) .Values.serviceAccount.name }}
+{{- else -}}
+    {{ default "default" .Values.serviceAccount.name }}
+{{- end -}}
+{{- end -}}

bitnami/discourse/templates/configmap-envs.yaml

@@ -0,0 +1,22 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "discourse.fullname" . }}-envs
+  labels:
+    {{- include "discourse.labels" . | nindent 4 }}
+data:
+  DISCOURSE_HOSTNAME: {{ .Values.hostname }}
+  DISCOURSE_USERNAME: {{ .Values.admin.username }}
+  DISCOURSE_EMAIL: {{ .Values.admin.email }}
+  DISCOURSE_SITENAME: {{ .Values.sitename }}
+  POSTGRESQL_HOST: {{ include "discourse.fullname" . }}-postgresql
+  DISCOURSE_POSTGRESQL_NAME: "{{ .Values.postgresql.postgresqlDatabase }}"
+  DISCOURSE_POSTGRESQL_USERNAME: "{{ .Values.postgresql.postgresqlUsername }}"
+  POSTGRESQL_ROOT_USER: "postgres"
+  POSTGRESQL_CLIENT_CREATE_DATABASE_NAME: "{{ .Values.postgresql.postgresqlDatabase }}"
+  POSTGRESQL_CLIENT_CREATE_DATABASE_USERNAME: "{{ .Values.postgresql.postgresqlUsername }}"
+  REDIS_HOST: {{ include "discourse.fullname" . }}-redis-master
+  REDIS_PORT_NUMBER: "6379"
+  {{- if .Release.IsUpgrade }}
+  DISCOURSE_SKIP_INSTALL: "yes"
+  {{- end }}

bitnami/discourse/templates/deployment-sidekiq.yaml

@@ -0,0 +1,72 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "discourse.fullname" . }}-sidekiq
+  labels:
+    {{- include "discourse.labels" . | nindent 4 }}
+    app.kubernetes.io/component: sidekiq
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      {{- include "discourse.selectorLabels" . | nindent 6 }}
+      component: sidekiq
+  template:
+    metadata:
+      labels:
+        {{- include "discourse.selectorLabels" . | nindent 8 }}
+        component: sidekiq
+    spec:
+    {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+      serviceAccountName: {{ include "discourse.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default "latest" }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          command: ["/app-entrypoint.sh"]
+          args:
+            - nami
+            - start
+            - --foreground
+            - discourse-sidekiq
+          env:
+            - name: DISCOURSE_HOST
+              value: {{ include "discourse.fullname" . }}
+            - name: DISCOURSE_PORT
+              value: "3000"
+          envFrom:
+            - configMapRef:
+                name: {{ include "discourse.fullname" . }}-envs
+            - secretRef:
+                name: {{ include "discourse.fullname" . }}-envs
+            # {{ .Values.additionalEnvs | toYaml | indent 6 }}
+          # livenessProbe:
+          #   httpGet:
+          #     path: /
+          #     port: http
+          readinessProbe:
+            exec:
+              command: [nami status discourse-sidekiqa]
+            initialDelaySeconds: 60
+            periodSeconds: 60
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+    {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}
+    {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+    {{- end }}