[bitnami/several] Adapt READMEs and helpers to Helm 3

bitnami/airflow/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
 name: airflow
-version: 4.3.0
+version: 4.3.1
 appVersion: 1.10.9
 description: Apache Airflow is a platform to programmatically author, schedule and monitor workflows.
 keywords:

bitnami/airflow/README.md

@@ -5,7 +5,7 @@
 ## TL;DR;
 
 ```console
-$ helm install bitnami/airflow
+$ helm install my-release bitnami/airflow
 ```
 
 ## Introduction
@@ -25,7 +25,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/airflow
+$ helm install my-release bitnami/airflow
 ```
 
 These commands deploy Airflow on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -160,7 +160,7 @@ The following tables lists the configurable parameters of the Kafka chart and th
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
                --set airflow.auth.username=my-user \
                --set airflow.auth.password=my-passsword \
                --set airflow.auth.fernetKey=my-fernet-key \
@@ -172,7 +172,7 @@ The above command sets the credentials to access the Airflow web UI.
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/airflow
+$ helm install my-release -f values.yaml bitnami/airflow
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/apache/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
 name: apache
-version: 7.3.4
+version: 7.3.5
 appVersion: 2.4.41
 description: Chart for Apache HTTP Server
 keywords:

bitnami/apache/README.md

@@ -8,7 +8,7 @@ The Apache HTTP Server ("httpd") was launched in 1995 and it has been the most p
 
 ```bash
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/apache
+$ helm install my-release bitnami/apache
 ```
 
 ## Introduction
@@ -30,7 +30,7 @@ To install the chart with the release name `my-release`:
 
 ```bash
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/apache
+$ helm install my-release bitnami/apache
 ```
 
 These commands deploy Apache on the Kubernetes cluster in the default configuration.
@@ -112,7 +112,7 @@ The following tables lists the configurable parameters of the Apache chart and t
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```bash
-$ helm install --name my-release \
+$ helm install my-release \
   --set imagePullPolicy=Always \
     bitnami/apache
 ```
@@ -122,7 +122,7 @@ The above command sets the `imagePullPolicy` to `Always`.
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```bash
-$ helm install --name my-release -f values.yaml bitnami/apache
+$ helm install my-release -f values.yaml bitnami/apache
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/cassandra/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/cassandra
+$ helm install my-release bitnami/cassandra
 ```
 
 ## Introduction
@@ -27,7 +27,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/cassandra
+$ helm install my-release bitnami/cassandra
 ```
 
 These commands deploy one node with Cassandra on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -141,15 +141,15 @@ The above parameters map to the env variables defined in [bitnami/cassandra](htt
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set dbUser.user=admin,dbUser.password=password\
     bitnami/cassandra
 ```
 
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/cassandra
+$ helm install my-release -f values.yaml bitnami/cassandra
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/consul/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/consul
+$ helm install my-release bitnami/consul
 ```
 
 ## Introduction
@@ -27,7 +27,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/consul
+$ helm install my-release bitnami/consul
 ```
 
 These commands deploy HashiCorp Consul on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -136,14 +136,14 @@ The following tables lists the configurable parameters of the HashiCorp Consul c
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release --set domain=consul-domain,gossipKey=secretkey bitnami/consul
+$ helm install my-release --set domain=consul-domain,gossipKey=secretkey bitnami/consul
 ```
 The above command sets the HashiCorp Consul domain to `consul-domain` and sets the gossip key to `secretkey`.
 
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/consul
+$ helm install my-release -f values.yaml bitnami/consul
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/elasticsearch/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/elasticsearch
+$ helm install my-release bitnami/elasticsearch
 ```
 
 ## Introduction
@@ -27,7 +27,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/elasticsearch
+$ helm install my-release bitnami/elasticsearch
 ```
 
 These commands deploy Elasticsearch on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -254,7 +254,7 @@ The following table lists the configurable parameters of the Elasticsearch chart
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set name=my-elastic,client.service.port=8080 \
   bitnami/elasticsearch
 ```
@@ -264,7 +264,7 @@ The above command sets the Elasticsearch cluster name to `my-elastic` and REST p
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/elasticsearch
+$ helm install my-release -f values.yaml bitnami/elasticsearch
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml).

bitnami/etcd/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
 name: etcd
-version: 4.4.13
+version: 4.4.14
 appVersion: 3.4.3
 description: etcd is a distributed key value store that provides a reliable way to store data across a cluster of machines
 keywords:

bitnami/etcd/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/etcd
+$ helm install my-release bitnami/etcd
 ```
 
 ## Introduction
@@ -27,7 +27,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/etcd
+$ helm install my-release bitnami/etcd
 ```
 
 These commands deploy etcd on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -140,7 +140,7 @@ The following tables lists the configurable parameters of the etcd chart and the
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set auth.rbac.rootPassword=secretpassword bitnami/etcd
 ```
 
@@ -149,7 +149,7 @@ The above command sets the etcd `root` account password to `secretpassword`.
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/etcd
+$ helm install my-release -f values.yaml bitnami/etcd
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)
@@ -305,7 +305,7 @@ To upgrade from previous charts versions, create a snapshot of the keyspace and
 You can use the command below to upgrade your chart by starting a new cluster using an existing snapshot, available in an existing PVC, to initialize the members:
 
 ```console
-$ helm install --name new-release bitnami/etcd \
+$ helm install new-release bitnami/etcd \
   --set statefulset.replicaCount=3 \
   --set persistence.enable=true \
   --set persistence.size=8Gi \

bitnami/fluentd/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
 name: fluentd
-version: 0.4.10
+version: 0.4.11
 appVersion: 1.9.1
 description: Fluentd is an open source data collector for unified logging layer
 keywords:

bitnami/fluentd/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/fluentd
+$ helm install my-release bitnami/fluentd
 ```
 
 ## Introduction
@@ -27,7 +27,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/fluentd --name my-release
+$ helm install my-release bitnami/fluentd
 ```
 
 These commands deploy Fluentd on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -150,7 +150,7 @@ The following tables lists the configurable parameters of the kibana chart and t
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set aggregator.port=24444 bitnami/fluentd
 ```
 
@@ -159,7 +159,7 @@ The above command sets the aggregators to listen on port 24444.
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/fluentd
+$ helm install my-release -f values.yaml bitnami/fluentd
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/grafana/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v1
 name: grafana
-version: 1.2.6
+version: 1.2.7
 appVersion: 6.6.1
 description: Grafana is an open source, feature rich metrics dashboard and graph editor for Graphite, Elasticsearch, OpenTSDB, Prometheus and InfluxDB.
 keywords:

bitnami/grafana/README.md

@@ -6,7 +6,7 @@
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/grafana
+$ helm install my-release bitnami/grafana
 ```
 
 ## Introduction
@@ -28,7 +28,7 @@ To install the chart with the release name `my-release`:
 
 ```console
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/grafana
+$ helm install my-release bitnami/grafana
 ```
 
 These commands deploy grafana on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -135,7 +135,7 @@ The following tables lists the configurable parameters of the grafana chart and
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set admin.user=admin-user bitnami/grafana
 ```
 
@@ -144,7 +144,7 @@ The above command sets the Grafana admin user to `admin-user`.
 Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/grafana
+$ helm install my-release -f values.yaml bitnami/grafana
 ```
 
 > **Tip**: You can use the default [values.yaml](values.yaml)

bitnami/harbor/README.md

@@ -16,7 +16,7 @@ For example, the following changes have been introduced:
 
 ```
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install bitnami/harbor
+$ helm install my-release bitnami/harbor
 ```
 
 ## Introduction
@@ -36,7 +36,7 @@ Install the Harbor helm chart with a release name `my-release`:
 
 ```bash
 $ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install --name my-release bitnami/harbor
+$ helm install my-release bitnami/harbor
 ```
 
 ## Uninstalling the Chart
@@ -292,7 +292,7 @@ The following table lists the configurable parameters of the Harbor chart and th
 Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`. For example,
 
 ```console
-$ helm install --name my-release \
+$ helm install my-release \
   --set harborAdminPassword=password \
     bitnami/harbor
 ```
@@ -302,7 +302,7 @@ The above command sets the Harbor administrator account password to `password`.
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,
 
 ```console
-$ helm install --name my-release -f values.yaml bitnami/harbor
+$ helm install my-release -f values.yaml bitnami/harbor
 ```
 
 ## Configuration and installation details