3.8.13 bone69 bb view 7 #33

efargas · 2015-06-17T13:31:08Z

update

When booting with device-tree, retrieve GPMC settings for ONENAND from the device-tree blob. This will allow us to remove all static settings stored in the gpmc-nand.c in the future once the migration to device-tree is complete. The user must now specify the ONENAND device width in the device-tree binding so that the GPMC can be programmed correctly. Therefore, update the device-tree binding documentation for ONENAND devices connected to the GPMC to reflect this. Please note that this does not include GPMC timings for ONENAND. The timings are being calculated at runtime. There is some legacy code that only enables read wait monitoring for non-OMAP3 devices. There are no known OMAP3 device issues that prevent this feature being enabled and so when booting with device-tree use the wait-monitoring settings described in the device-tree blob. Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]>

Each GPMC chip-select can be configured to map 16MB, 32MB, 64MB or 128MB of address space. The physical base address where a chip-select starts is also configurable and must be aligned on a boundary that is equal to or greater than the size of the address space mapped bt the chip-select. When enabling a GPMC chip-select, ensure that the base address is aligned to the appropriate boundary. Reported-by: Mark Jackson <[email protected]> Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]>

With commit 21cc2bd (ARM: OMAP2+: Remove apollon board support) the variable "boot_rom_space" is now not needed and the code surrounding this variable can be cleaned up and simplified. Remove unnecessary definitions and clean-up the comment as well. Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]>

When the GPMC driver is probed, we call gpmc_mem_init() to see which chip-selects have already been configured and enabled by the boot-loader and allocate space for them. If we fail to allocate space for one chip-select, then we return failure from the probe and the GPMC driver will not be available. Rather than render the GPMC useless for all GPMC devices, if we fail to allocate space for one chip-select print a warning and disable the chip-select. This way other GPMC clients can still be used. There is no downside to this approach, because all GPMC clients need to request a chip-select before they can use the GPMC and on requesting a chip-select, if memory has not already been reserved for the chip-select then it will be. Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]>

gpmc_probe_nor_child() calls of_platform_device_create() to create a platform device for the NOR child. If this function fails the value of ret is returned to the caller but this value is zero since it was assigned the return of a previous call to gpmc_cs_program_settings() that had to succeed or otherwise gpmc_probe_nor_child() would have returned before. This means that if of_platform_device_create() fails, 0 will be returned to the caller instead of an appropriate error code. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]>

The gpmc_probe_nor_child() function is used in the GPMC driver to configure the GPMC for a NOR child device node. But this function is quite generic and all the NOR specific configuration is made by the driver of the actual NOR flash memory used. Other Pseudo-SRAM devices such as ethernet controllers need a similar setup so by making this function generic it can be used for those too. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Jon Hunter <[email protected]>

Besides being used to interface with external memory devices, the General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices such as ethernet controllers to OMAP2+ processors using the TI GPMC as a data bus. This patch allows an ethernet chip to be defined as an GPMC child device node. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Jon Hunter <[email protected]>

Pass an optional device_node pointer in the platform data, which in turn will be put into a mtd_part_parser_data. This way, code that sets up the platform devices can pass along the node from DT so that the partitions can be parsed. For non-DT boards, this change has no effect. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Grant Likely <[email protected]> Acked-by: Artem Bityutskiy <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

gpmc_nand_init() will be called from another driver's probe() function, so the easiest way to prevent section mismatches is to drop the annotation here. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

The am33xx is capable of handling bch error correction modes, so enable that feature in the driver. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

On DT driven boards, the gpmc node will match the driver. Hence, there's no need to do that unconditionally from the initcall. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

gpmc_onenand_init() will be called from another driver's probe() function, so drop the __init annotation, in order to prevent section mismatches. Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

Signed-off-by: Pantelis Antoniou <[email protected]>

Pass an optional device_node pointer in the platform data, which in turn will be put into a mtd_part_parser_data. This way, code that sets up the platform devices can pass along the node from DT so that the partitions can be parsed. For non-DT boards, this change has no effect. Acked-by: Artem Bityutskiy <[email protected]> Signed-off-by: Ezequiel Garcia <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

Convert the OMAP2+ ONENAND code to use the gpmc_cs_program_settings() function for configuring the various GPMC options instead of directly programming the CONFIG1 register. Signed-off-by: Jon Hunter <[email protected]> Tested-by: Ezequiel Garcia <[email protected]> Conflicts: arch/arm/mach-omap2/gpmc-onenand.c

Various fixes: * clk_activation option added * pinctrl support add * Add camera device * Fix child node handling Signed-off-by: Pantelis Antoniou <[email protected]>

Add am33xx gpmc device. Signed-off-by: Pantelis Antoniou <[email protected]>

A recent patch refactored i2c error handling in the register read/write path. This adds similar handling to the other i2c paths used in fw_update and bootloader state detection. The generic i2c layer can return values indicating a partial transaction. From the atmel_mxt driver's perspective, this is an IO error, so we use some helper functions to convert these partial transfers to -EIO in a uniform way. Other error codes might still be useful, though, so we pass them up unmodified. Signed-off-by: Daniel Kurtz <[email protected]> Change-Id: I59eabbb80dea610a89c01a3be06f0d165f4b4431

As soon as the irq is request, input event interrupts could occur that the isr should handle. Similarly, if there are input events queued up in the device output buffer, it will send them immediately when we drain the message buffer with mxt_handle_messages. Therefore, register the input device before enabling the irq (or handling messages). Signed-off-by: Daniel Kurtz <[email protected]> BUG=chromium-os:27713 TEST=cat /sys/bus/i2c/drivers/atmel_mxt_ts/2-004b/object Change-Id: I16172901d963cd2e60533e12e455012cb62cdfe5 Reviewed-on: https://gerrit.chromium.org/gerrit/21061 Commit-Ready: Daniel Kurtz <[email protected]> Reviewed-by: Daniel Kurtz <[email protected]> Tested-by: Daniel Kurtz <[email protected]> [djkurtz: v3.8 rebase]

Move input device initialization to its own helper function. This is in preparation of a future patch that makes input device conditional on the device not being in its bootloader. Signed-off-by: Daniel Kurtz <[email protected]> BUG=chrome-os-partner:9103 TEST=builds clean; input device created as before. Change-Id: Ife128dc63a4c23c162ed116c21cc0dd3d076a559 Reviewed-on: https://gerrit.chromium.org/gerrit/20844 Commit-Ready: Daniel Kurtz <[email protected]> Reviewed-by: Daniel Kurtz <[email protected]> Tested-by: Daniel Kurtz <[email protected]> [djkurtz: v3.8-rc3 rebase]

In some cases it is possible for a device to be in its bootloader at driver probe time. This is detected by the driver when probe() is called with an i2c_client which has one of the Atmel Bootloader i2c addresses. In this case, we should load enough driver functionality to still loading new firmware using: echo 1 > update_fw However, we must be very careful not to follow any code paths that would try to access the as-yet uninitialized object table or input device. In particular: 1) mxt_remove calls input_unregister_device on input_dev. 2) mxt_suspend/resume reads and writes from the object table. 3) Spurious or bootloader induced interrupts Signed-off-by: Benson Leung <[email protected]> Signed-off-by: Daniel Kurtz <[email protected]> BUG=chrome-os-partner:8733, chrome-os-partner:16507 TEST=Interrupt a firmware update. Boot the system. Ensure that the atmel_mxt_ts driver brings up the device using one of the two MXT_BOOT i2c addresses. From there, it should be possible to echo 1 > update_fw and recover. TEST=First, get the touch device into a bad state by doing the following: 1. Modify chromeos/config/base.config and set CONFIG_TOUCHSCREEN_ATMEL_MXT=m 2. Build, boot this kernel, and make sure that the touch device works. 3. /opt/google/touch/firmware/chromeos-touch-firmwareupdate.sh \ -d atmel_mxt_ts -n maxtouch-ts.fw -f 4. Before it can finish, CTRL-C to interrupt the firmware update. This will ensure that the touch device is stuck in bootloader mode. TEST=No crash on mxt_remove: 1. rmmod atmel_mxt_ts 2. check that the system does not reboot. 3. modprobe chromeos_mxt_ts TEST=No crash on suspend/resume: 1. Close the lid to suspend the system. 2. Open the lid to suspend the system. 3. Check that the system did not reboot. Original-Change-Id: If86e6f0065bb24a5da340ac69adca4ac61d675c9 Reviewed-on: https://gerrit.chromium.org/gerrit/19637 Original-Change-Id: I83e517d21738cb75d0c2b0ab8bf16398044e52f3 Reviewed-on: https://gerrit.chromium.org/gerrit/39022 Reviewed-by: Yufeng Shen <[email protected]> Commit-Ready: Benson Leung <[email protected]> Tested-by: Benson Leung <[email protected]> v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]> Change-Id: I2b65ec6cc3c9506372499785f4f8599faf4aa353

If there are any (i2c) errors during fw update, abort the update, but leave the i2c address assigned to the bootloader address. Note that an error when trying to reset the device into the bootloader will leave the i2c address assigned to the application address. Signed-off-by: Benson Leung <[email protected]> Signed-off-by: Daniel Kurtz <[email protected]> Change-Id: I2933505115dd55aa4dcf07e333f0e1d56e9e246e

…store after After firmware update, the device may have a completely different object table which corresponds to an input device with different properties. So, destroy the old state before firmware update, and completely reinitialize the driver afterward. Two benefits of this: 1) Since there is no input device during fw update, no need to worry about device open/close events. 2) If firmware update fails, the device and driver will still be in bootloader mode and an improperly configured input device will not exist. Change-Id: I42e6b946e2206b4957c313be00b9b45b9dd02b60 Signed-off-by: Daniel Kurtz <[email protected]>

Refactor bootloading into a three parts: 1) bl enter that only happens when device is not yet in bl. bl enter frees old driver state and switches to BL i2c addr. 2) the actual fw_update 3) bl exit that only happens if fw update is successful. bl exit switches to APP i2c addr and reloads object table and creates a new input device. Signed-off-by: Benson Leung <[email protected]> Signed-off-by: Daniel Kurtz <[email protected]> Signed-off-by: Yufeng Shen <[email protected]> BUG=chrome-os-partner:8716,chrome-os-partner:9103,chrome-os-partner:10688 TEST=Place an firmware file at /lib/firmware/maxtouch.fw echo 1 > update_fw Ensure that a normal firmware update works. TEST=update the firmware and then check that the input device is still working, by using evtest/xinput. TEST=The following instructions will write the wrong firmware to the touchpad device. 1. cd /sys/bus/i2c/devices/1-004b 2. echo maxtouch-ts.fw > fw_file 3. echo 1 > update_fw 4. dmesg | tail This will result in a failed touchpad update. Check that dmesg shows: [ 158.495164] atmel_mxt_ts 1-004b: bootloader version: 32 [ 170.563491] atmel_mxt_ts 1-004b: mxt_read_reg: i2c read failed [ 170.563513] atmel_mxt_ts 1-004b: Failed to initialize on exit bl. error = -6 Check that the system does not panic in this situation. To recover from this state, simply shut the machine down completely using sudo shutdown -P now Original-Change-Id: I49bf582be90ffc8c4dd2696413ceff060fd8926e Reviewed-on: https://gerrit.chromium.org/gerrit/21831 Original-Change-Id: I2ec8b4c96954151495238c450301eddd48085e18 Reviewed-on: https://gerrit.chromium.org/gerrit/23256 Reviewed-by: Daniel Kurtz <[email protected]> Tested-by: Yufeng Shen <[email protected]> Commit-Ready: Yufeng Shen <[email protected]> Original-Change-Id: Ib773efd8b76aced9f5faab0b51745db7192e78f9 Reviewed-on: https://gerrit.chromium.org/gerrit/37860 v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]>

…loader The driver should not immediately read bootloader status when in Application Update Mode. The CHG line will assert when the device has made a state transition and is ready to report a new status via i2c. This change adds a wait for completion in mxt_check_bootloader, and changes the mxt_interrupt handler to signal the completion. This will allow this commit in the intel_i2c driver to be reverted, as the time is no longer spent waiting for i2c read: 3414f39 CHROMIUM: drm/i915/intel_i2c: Increase bitbang fallback timeout for atmel_mx Signed-off-by: Benson Leung <[email protected]> BUG=chrome-os-partner:8730 TEST=(a) Verify when device not in BL (normal case), no functional change. TEST=(b) Verify fw update works, and device is initialized properly after. Change-Id: I5d20a9d63361fb91cb59aa7351e581f55422b924 Reviewed-on: https://gerrit.chromium.org/gerrit/21173 v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]>

Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. This improves firmware update time at 300ms as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung <[email protected]> BUG=chrome-os-partner:8716,chrome-os-partner:8732 TEST=Verify fw update works, and device is initialized properly after. Change-Id: Id8982144d3966ccd8227da2a2ea47f9e73115d8e Reviewed-on: https://gerrit.chromium.org/gerrit/21832 v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]>

Changed to support address on new part. This is contrary to Atmel documentation, and we are still working with them to clear up this inconsistency. In the meantime, change it for now to allow existing systems to update. BUG=chrome-os-partner:8734 TEST=Firmware update works. Change-Id: Ib2db2a066126df291c7a85208743c80c5357d55d Signed-off-by: Benson Leung <[email protected]> Reviewed-on: https://gerrit.chromium.org/gerrit/19639 Reviewed-by: Daniel Kurtz <[email protected]>

175ms is not enough time to update the firmware. Set to 500ms. BUG=chrome-os-partner:8731 TEST=firmware update. ensure that transitions back to app mode at the end. Change-Id: Idaec72cb4f326a10d3513ffb82bf4b144c68b30c Signed-off-by: Benson Leung <[email protected]> Reviewed-on: https://gerrit.chromium.org/gerrit/19640 Reviewed-by: Daniel Kurtz <[email protected]>

In some situations, a touch surface may get out of calibration. It is useful to provide a means for userspace to trigger a recal, so add a calibrate sysfs entry. Signed-off-by: Daniel Kurtz <[email protected]> BUG=chrome-os-partner:9148 TEST=echo 1 > /sys/bus/i2c/drivers/atmel_mxt_ts/<dev>/calibrate Change-Id: Idbdd7bf4f412f03e36604a2a1fae162f059234d3 Reviewed-on: https://gerrit.chromium.org/gerrit/20812 Reviewed-by: Daniel Kurtz <[email protected]> Tested-by: Daniel Kurtz <[email protected]> Commit-Ready: Daniel Kurtz <[email protected]> v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]>

Config checksum is returned in the T6 message at every boot, and when the config changes. Cache its value and add sysfs entry for userspace to read it. Signed-off-by: Daniel Kurtz <[email protected]> BUG=chrome-os-partner:9103 TEST=cat /sys/bus/i2c/drivers/atmel_mxt_ts/2-004b/config_csum Change-Id: Ic546d1671e9f6a3da598f06a31f76a6ca96ce235 Reviewed-on: https://gerrit.chromium.org/gerrit/20597 Commit-Ready: Daniel Kurtz <[email protected]> Reviewed-by: Daniel Kurtz <[email protected]> Tested-by: Daniel Kurtz <[email protected]> Reviewed-by: Benson Leung <[email protected]> v3.7 rebase: Signed-off-by: Daniel Kurtz <[email protected]>

http://beagleboard.org/Community/Forums?place=msg%2Fbeagleboard%2FU3-4wh9yook%2Fgfc81YXrH6kJ Signed-off-by: James Johnson <[email protected]> Signed-off-by: Robert Nelson <[email protected]>

Signed-off-by: Charles Steinkuehler <[email protected]>

Signed-off-by: Robert Nelson <[email protected]>

Software came from http://www.element14.com/community/docs/DOC-67958?ICID=BBB-feature-viewpanel Hints came from http://armsdr.blogspot.com/2014/01/element14-bb-view-and-debian-beta.html Testing on BB-VIEW 7" LCD display

Picking up some additional changes

RobertCNelson · 2015-06-17T13:58:40Z

NAK, merging 3.8.x into 3.14.x is a no-no...

Regards,

commit 0f4f2af upstream. While proving lock, the following warning happens and it is fixed after initializing lock in the setup function INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.27-02861-g39df285-dirty #33 [<c00154ac>] (unwind_backtrace+0x0/0xf4) from [<c0011b50>] (show_stack+0x10/0x14) [<c0011b50>] (show_stack+0x10/0x14) from [<c00689ac>] (__lock_acquire+0x900/0xb14) [<c00689ac>] (__lock_acquire+0x900/0xb14) from [<c0069394>] (lock_acquire+0x68/0x7c) [<c0069394>] (lock_acquire+0x68/0x7c) from [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<c0381e6c>] (clk_gate_endisable+0x28/0x88) [<c0381e6c>] (clk_gate_endisable+0x28/0x88) from [<c0381ee0>] (clk_gate_enable+0xc/0x14) [<c0381ee0>] (clk_gate_enable+0xc/0x14) from [<c0386c68>] (flexgen_enable+0x28/0x40) [<c0386c68>] (flexgen_enable+0x28/0x40) from [<c037f260>] (__clk_enable+0x5c/0x9c) [<c037f260>] (__clk_enable+0x5c/0x9c) from [<c037f558>] (clk_enable+0x18/0x2c) [<c037f558>] (clk_enable+0x18/0x2c) from [<c064a1dc>] (st_lpc_of_register+0xc0/0x248) [<c064a1dc>] (st_lpc_of_register+0xc0/0x248) from [<c0649e44>] (clocksource_of_init+0x34/0x58) [<c0649e44>] (clocksource_of_init+0x34/0x58) from [<c0637ddc>] (sti_timer_init+0x10/0x18) [<c0637ddc>] (sti_timer_init+0x10/0x18) from [<c06343f8>] (time_init+0x20/0x30) [<c06343f8>] (time_init+0x20/0x30) from [<c0632984>] (start_kernel+0x20c/0x2e8) [<c0632984>] (start_kernel+0x20c/0x2e8) from [<40008074>] (0x40008074) Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: Gabriel Fernandez <[email protected]> Fixes: b116517 ("clk: st: STiH407: Support for Flexgen Clocks") Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ecf5fc6 upstream. Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: [email protected] # 3.9+ [[email protected]: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <[email protected]> Signed-off-by: Michal Hocko <[email protected]> Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ecf5fc6 upstream. Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. [[email protected]: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <[email protected]> Signed-off-by: Michal Hocko <[email protected]> Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Eric Dumazet <[email protected]> Cc: David Ahern <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit e669b86 ] In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ beagleboard#33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Eric Dumazet <[email protected]> Cc: David Ahern <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Benc <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 9f41631 ] do_task_stat() calls get_wchan(), which further does unwind_frame(). unwind_frame() restores frame->pc to original value in case function graph tracer has modified a return address (LR) in a stack frame to hook a function return. However, if function graph tracer has hit a filtered function, then we can't unwind it as ftrace_push_return_trace() has biased the index(frame->graph) with a 'huge negative' offset(-FTRACE_NOTRACE_DEPTH). Moreover, arm64 stack walker defines index(frame->graph) as unsigned int, which can not compare a -ve number. Similar problem we can have with calling of walk_stackframe() from save_stack_trace_tsk() or dump_backtrace(). This patch fixes unwind_frame() to test the index for -ve value and restore index accordingly before we can restore frame->pc. Reproducer: cd /sys/kernel/debug/tracing/ echo schedule > set_graph_notrace echo 1 > options/display-graph echo wakeup > current_tracer ps -ef | grep -i agent Above commands result in: Unable to handle kernel paging request at virtual address ffff801bd3d1e000 pgd = ffff8003cbe97c00 [ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000006 [#1] SMP [...] CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33 [...] task: ffff8003c21ba000 task.stack: ffff8003cc6c0000 PC is at unwind_frame+0x12c/0x180 LR is at get_wchan+0xd4/0x134 pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145 sp : ffff8003cc6c3ab0 x29: ffff8003cc6c3ab0 x28: 0000000000000001 x27: 0000000000000026 x26: 0000000000000026 x25: 00000000000012d8 x24: 0000000000000000 x23: ffff8003c1c04000 x22: ffff000008c83000 x21: ffff8003c1c00000 x20: 000000000000000f x19: ffff8003c1bc0000 x18: 0000fffffc593690 x17: 0000000000000000 x16: 0000000000000001 x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f x13: 0000000000000001 x12: 0000000000000000 x11: 00000000e8f4883e x10: 0000000154f47ec8 x9 : 0000000070f367c0 x8 : 0000000000000000 x7 : 00008003f7290000 x6 : 0000000000000018 x5 : 0000000000000000 x4 : ffff8003c1c03cb0 x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000 x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000 Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000) Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000) [...] [<ffff00000808892c>] unwind_frame+0x12c/0x180 [<ffff000008305008>] do_task_stat+0x864/0x870 [<ffff000008305c44>] proc_tgid_stat+0x3c/0x48 [<ffff0000082fde0c>] proc_single_show+0x5c/0xb8 [<ffff0000082b27e0>] seq_read+0x160/0x414 [<ffff000008289e6c>] __vfs_read+0x58/0x164 [<ffff00000828b164>] vfs_read+0x88/0x144 [<ffff00000828c2e8>] SyS_read+0x60/0xc0 [<ffff0000080834a0>] __sys_trace_return+0x0/0x4 Fixes: 20380bb (arm64: ftrace: fix a stack tracer's output under function graph tracer) Signed-off-by: Pratyush Anand <[email protected]> Signed-off-by: Jerome Marchand <[email protected]> [[email protected]: replace WARN_ON with WARN_ON_ONCE] Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit d455f29 ] Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ beagleboard#33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ beagleboard#33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a2fcd5c upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [beagleboard#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ beagleboard#33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by: Tina Zhang <[email protected]> Cc: Adam Jackson <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> [danvet: Add additional explanations + cc: stable.] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a2fcd5c upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by: Tina Zhang <[email protected]> Cc: Adam Jackson <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> [danvet: Add additional explanations + cc: stable.] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 68be930 ] BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [beagleboard#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ beagleboard#33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a314777 ] BUG: unable to handle kernel paging request at ffffffffa016a270 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0 Oops: 0000 [beagleboard#1 CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ beagleboard#33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:atomic_notifier_chain_register+0x24/0x60 Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08 RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086 RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278 RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240 RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260 R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78 FS: 00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0 Call Trace: register_inet6addr_notifier+0x13/0x20 cxgb4_init_module+0x6c/0x1000 [cxgb4 ? 0xffffffffa01d7000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If pci_register_driver fails, register inet6addr_notifier is pointless. This patch fix the error path in cxgb4_init_module. Fixes: b5a02f5 ("cxgb4 : Update ipv6 address handling api") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7749112 ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic beagleboard#33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6b6382a ] When multiple adapters are present in the system, pci hot-removing second adapter leads to the following warning as both the adapters registered thermal zone device with same thermal zone name/type. Therefore, use unique thermal zone name during thermal zone device initialization. Also mark thermal zone dev NULL once unregistered. [ 414.370143] ------------[ cut here ]------------ [ 414.370944] sysfs group 'power' not found for kobject 'hwmon0' [ 414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281 sysfs_remove_group+0x76/0x80 [ 414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33 [ 414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016 [ 414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54 [ 414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286 [ 414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510 [ 414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000 [ 414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008 [ 414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020 [ 414.395661] FS: 00007fd2a7171740(0000) GS:ffff8ee2de200000(0000) knlGS:0000000000000000 [ 414.396825] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0 [ 414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 414.401473] Call Trace: [ 414.402685] device_del+0x89/0x400 [ 414.403819] device_unregister+0x16/0x60 [ 414.405024] hwmon_device_unregister+0x44/0xa0 [ 414.406112] thermal_remove_hwmon_sysfs+0x196/0x200 [ 414.407256] thermal_zone_device_unregister+0x1b5/0x1f0 [ 414.408415] cxgb4_thermal_remove+0x3c/0x4f [cxgb4] [ 414.409668] remove_one+0x212/0x290 [cxgb4] [ 414.410875] pci_device_remove+0x36/0xb0 [ 414.412004] device_release_driver_internal+0xe2/0x1c0 [ 414.413276] pci_stop_bus_device+0x64/0x90 [ 414.414433] pci_stop_and_remove_bus_device_locked+0x16/0x30 [ 414.415609] remove_store+0x75/0x90 [ 414.416790] kernfs_fop_write+0x114/0x1b0 [ 414.417930] vfs_write+0xcf/0x210 [ 414.419059] ksys_write+0xa7/0xe0 [ 414.420120] do_syscall_64+0x4c/0xa0 [ 414.421278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 414.422335] RIP: 0033:0x7fd2a686afd0 [ 414.423396] Code: Bad RIP value. [ 414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0 [ 414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001 [ 414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740 [ 414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400 [ 414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 414.431027] irq event stamp: 76300 [ 414.435678] ---[ end trace 13865acb4d5ab00f ]--- Fixes: b187191 ("cxgb4: Add thermal zone support") Signed-off-by: Potnuri Bharat Teja <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 23c2d49 upstream. The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Patrick Wang <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit bcd7026 ] By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Jon Hunter and others added 30 commits January 1, 2015 16:25

ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs

d9cfcf3

The am33xx is capable of handling bch error correction modes, so enable that feature in the driver. Signed-off-by: Daniel Mack <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>

gpmc: Add missing gpmc includes.

a4c045c

Signed-off-by: Pantelis Antoniou <[email protected]>

omap: gpmc: Various driver fixes

3b0f80a

Various fixes: * clk_activation option added * pinctrl support add * Add camera device * Fix child node handling Signed-off-by: Pantelis Antoniou <[email protected]>

gpmc: Add DT node for gpmc on am33xx

e757eee

Add am33xx gpmc device. Signed-off-by: Pantelis Antoniou <[email protected]>

JamesWJohnson and others added 9 commits January 1, 2015 16:25

backport: am335x: ti,omap4-rng: from ti v3.12 bsp

09206a7

http://beagleboard.org/Community/Forums?place=msg%2Fbeagleboard%2FU3-4wh9yook%2Fgfc81YXrH6kJ Signed-off-by: James Johnson <[email protected]> Signed-off-by: Robert Nelson <[email protected]>

Add Probotix custom LCD device tree overlay

cfde7d4

Signed-off-by: Charles Steinkuehler <[email protected]>

packaging: sync with mainline

7a53e53

Signed-off-by: Robert Nelson <[email protected]>

deb-pkg: install dtbs in linux-image package

b06d81b

Signed-off-by: Robert Nelson <[email protected]>

deb-pkg: no dtbs_install

d292ca5

Signed-off-by: Robert Nelson <[email protected]>

3.8.13-bone69 patchset

d9898ba

3.8.13-bone69 bb.org_defconfig

41b0051

Signed-off-by: Robert Nelson <[email protected]>

BeagleBone: Add support for Element14 BB-VIEW LCD touchscreens

bc8f3d7

Software came from http://www.element14.com/community/docs/DOC-67958?ICID=BBB-feature-viewpanel Hints came from http://armsdr.blogspot.com/2014/01/element14-bb-view-and-debian-beta.html Testing on BB-VIEW 7" LCD display

BeagleBone: Add support for Element14 BB-VIEW LCD touchscreens

a4b6aff

Picking up some additional changes

RobertCNelson closed this Jun 17, 2015

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

3.8.13 bone69 bb view 7 #33

3.8.13 bone69 bb view 7 #33

efargas commented Jun 17, 2015

RobertCNelson commented Jun 17, 2015

3.8.13 bone69 bb view 7 #33

3.8.13 bone69 bb view 7 #33

Conversation

efargas commented Jun 17, 2015

RobertCNelson commented Jun 17, 2015