Fix remoteproc to work with the PRU GNU Binutils port #120
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
This reverts commit 00f0ea7. Signed-off-by: Robert Nelson <[email protected]>
This is a hack to change the USB class/subclass/protocol for the RNDIS USB gadget function. According to [1], this is "RNDIS over Ethernet". This configuration is recognized by rndiscmp.inf in Windows so that the correct driver loads without the need for a custom signed .inf. Furthermore, it is ignored on macOS and Linux (so we can use CDC/ECM instead). [1]: http://www.usb.org/developers/defined_class/#BaseClassEFh
This driver is also useful on e.g. TI SoCs.
This reverts commit 956b200. Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN. This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0. Signed-off-by: Matt Ranostay <[email protected]>
TPS65217 MFD driver supports the IRQ domain to handle the charger input interrupts and push button status event. The interrupt controller enables corresponding IRQ handling in the charger[*] and power button driver[**]. [*] drivers/power/supply/tps65217_charger.c [**] drivers/input/misc/tps65218-pwrbutton.c Signed-off-by: Milo Kim <[email protected]>
Support the charger driver and disable it by default. Signed-off-by: Milo Kim <[email protected]>
Support the power button driver and disable it by default. Signed-off-by: Milo Kim <[email protected]>
AM335x bone based boards have the PMIC interrupt named NMI which is connected to TPS65217 device. AM335x main interrupt controller provides it and the number is 7. Signed-off-by: Milo Kim <[email protected]>
TPS65217 supports three interrupt sources. This patch enables assigning each IRQ number in the charger and power button node. Then corresponding IRQ will be requested by each driver. Signed-off-by: Milo Kim <[email protected]>
This enables the charger driver gets corresponding IRQ number by using platform_get_irq_byname() helper. Signed-off-by: Milo Kim <[email protected]>
This enables the power button driver gets corresponding IRQ number by using platform_get_irq(). Signed-off-by: Milo Kim <[email protected]>
Enum value of 'tps65217_irq_type' is not matched with DT parsed hwirq number[*]. The MFD driver gets the IRQ data by referencing hwirq, but the value is different. So, irq_to_tps65217_irq() returns mismatched IRQ data. Eventually, the power button driver enables not PB but USB interrupt when it is probed. According to the TPS65217 register map[**], USB interrupt is the LSB. This patch defines synchronized IRQ value. [*] include/dt-bindings/mfd/tps65217.h [**] http://www.ti.com/lit/ds/symlink/tps65217.pdf Signed-off-by: Milo Kim <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Pantelis Antoniou <[email protected]>
When disabling an omap device (not when removing the driver), the device is removed but the hwmod's linger. Fix the resource leak and the crash when calling omap_device_idle() after the device's omap data have been removed. Signed-off-by: Pantelis Antoniou <[email protected]>
Having an omap serial device without a serial aliases doesn't work. For now fallback to using the hwmod instance. Signed-off-by: Pantelis Antoniou <[email protected]>
When using DT the driver devm_kalloc's platform data and assigns them directly to the pdev->dev.platform variable. This is wrong since device de-registration expects the data to be kmalloc'ed instead, resulting in a crash. Fix by copying the platform data to a kmalloc buffer. Signed-off-by: Pantelis Antoniou <[email protected]>
90% of the usage of device node's full_name is printing it out
in a kernel message. Preparing for the eventual delayed allocation
introduce a custom printk format specifier that is both more
compact and more pleasant to the eye.
For instance typical use is:
pr_info("Frobbing node %s\n", node->full_name);
Which can be written now as:
pr_info("Frobbing node %pO\n", node);
More fine-grained control of formatting includes printing the name,
flag, path-spec name, reference count and others, explained in the
documentation entry.
Signed-off-by: Pantelis Antoniou <[email protected]>
We are going to need the overlays to appear on sysfs with runtime global properties (like master enable) so turn them into kobjects. They have to be in sysfs so that people can have information about the overlays applied in the system, i.e. where their targets are and whether removal is possible. In a future more attributes can be added in a backwards compatible manner. Signed-off-by: Pantelis Antoniou <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]>
A throw once master enable switch to protect against any further overlay applications if the administrator desires so. A kernel command line option is provided as well. Signed-off-by: Pantelis Antoniou <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]>
Documentation ABI entry for overlays sysfs entries. Signed-off-by: Pantelis Antoniou <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]>
Rewritten using includes, v3.16.1 Signed-off-by: Dave Lambert <[email protected]> Signed-off-by: Robert Nelson <[email protected]>
Add support for the WL1835MOD cape. This cape conflicts with the eMMC and HDMI on board the BeagleBone Black. This change requires that the board be booted from the SD card slot by holding the user/boot button down at power on and reset. Signed-off-by: Eyal Reizer <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
4.9 TI Delta: RobertCNelson/ti-linux-kernel@275e74d...ecbbb5c Signed-off-by: Robert Nelson <[email protected]>
PRU IRAM addresses need to be masked before being handled to remoteproc. This is due to PRU Binutils' lack of separate address spaces for IRAM and DRAM. Signed-off-by: Dimitar Dimitrov <[email protected]>
|
I tested this patch on top of Linux beaglebone 4.9.13-ti-r24, using https://github.com/dinuxbg/pru-gcc-examples/tree/master/blinking-led/pru . |
|
Will this break PRU firmware compiled with the TI compiler? |
|
it hasn't in the past (v4.1.x-ti and v4.4.x-ti). ;) |
|
Patch is safe - it does not break TI CGT. |
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this pull request
Mar 16, 2017
merge: beagleboard/linux#120 Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
added a commit
to RobertCNelson/ti-linux-kernel-dev
that referenced
this pull request
Mar 16, 2017
merge: beagleboard/linux#120 Signed-off-by: Robert Nelson <[email protected]>
|
@dinuxbg sorry for the delay, pushed out as part of r25 |
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 31, 2018
[ Upstream commit 994ec64 ] The probe function is not allowed to fail after registering the RTC because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Also, the interrupt handler: ac100_rtc_irq() is dereferencing chip->rtc but this may still be NULL when it is called, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 00000194 pgd = (ptrval) [00000194] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 72 Comm: irq/71-ac100-rt Not tainted 4.15.0-rc1-next-20171201-dirty #120 Hardware name: Allwinner sun8i Family task: (ptrval) task.stack: (ptrval) PC is at mutex_lock+0x14/0x3c LR is at ac100_rtc_irq+0x38/0xc8 pc : [<c06543a4>] lr : [<c04d9a2c>] psr: 60000053 sp : ee9c9f28 ip : 00000000 fp : ee9adfdc r10: 00000000 r9 : c0a04c48 r8 : c015ed18 r7 : ee9bd600 r6 : ee9c9f28 r5 : ee9af590 r4 : c0a04c48 r3 : ef3cb3c0 r2 : 00000000 r1 : ee9af590 r0 : 00000194 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process irq/71-ac100-rt (pid: 72, stack limit = 0x(ptrval)) Stack: (0xee9c9f28 to 0xee9ca000) 9f20: 00000000 7c2fd1be c015ed18 ee9adf40 ee9c0400 ee9c0400 9f40: ee9adf40 c015ed34 ee9c8000 ee9adf64 ee9c0400 c015f040 ee9adf80 00000000 9f60: c015ee24 7c2fd1be ee9adfc0 ee9adf80 00000000 ee9c8000 ee9adf40 c015eef4 9f80: ef1eba34 c0138f14 ee9c8000 ee9adf80 c0138df4 00000000 00000000 00000000 9fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [<c06543a4>] (mutex_lock) from [<c04d9a2c>] (ac100_rtc_irq+0x38/0xc8) [<c04d9a2c>] (ac100_rtc_irq) from [<c015ed34>] (irq_thread_fn+0x1c/0x54) [<c015ed34>] (irq_thread_fn) from [<c015f040>] (irq_thread+0x14c/0x214) [<c015f040>] (irq_thread) from [<c0138f14>] (kthread+0x120/0x150) [<c0138f14>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Solve both issues by moving to devm_rtc_allocate_device()/rtc_register_device() Reported-by: Quentin Schulz <[email protected]> Tested-by: Quentin Schulz <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
crow-misia
pushed a commit
to crow-misia/linux
that referenced
this pull request
Nov 17, 2018
commit 5c4c450 upstream. The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ beagleboard#120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 26, 2018
commit 5c4c450 upstream. The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
fhgwright
pushed a commit
to fhgwright/bb-linux
that referenced
this pull request
Jan 20, 2019
commit 5c4c450 upstream. The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ beagleboard#120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 15, 2020
commit 1413ef6 upstream. The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09 ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09 to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: Ben Hutchings <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
nmenon
pushed a commit
to nmenon/nm-beagle-linux
that referenced
this pull request
May 22, 2023
[ Upstream commit 031af50 ] The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960b ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // beagleboard#18 | 10: d2800681 mov x1, #0x34 // beagleboard#52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // beagleboard#86 | 20: d2800f03 mov x3, #0x78 // beagleboard#120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // beagleboard#18 | 44: d2800681 mov x1, #0x34 // beagleboard#52 | 48: d2800ac2 mov x2, #0x56 // beagleboard#86 | 4c: d2800f03 mov x3, #0x78 // beagleboard#120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, beagleboard#8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // beagleboard#18 | 14: d2800681 mov x1, #0x34 // beagleboard#52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // beagleboard#86 | 24: d2800f03 mov x3, #0x78 // beagleboard#120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, beagleboard#8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // beagleboard#18 | 4c: d2800681 mov x1, #0x34 // beagleboard#52 | 50: d2800ac2 mov x2, #0x56 // beagleboard#86 | 54: d2800f03 mov x3, #0x78 // beagleboard#120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, beagleboard#8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b79 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng <[email protected]> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Mark Rutland <[email protected]> Cc: [email protected] Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Steve Capper <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
PRU IRAM addresses need to be masked before being handled to
remoteproc. This is due to PRU Binutils' lack of separate address
spaces for IRAM and DRAM.
Signed-off-by: Dimitar Dimitrov [email protected]