feat: update L1 CloudFormation resource definitions

[aws-cdk-automation]

Updates the L1 CloudFormation resource definitions with the latest changes from @aws-cdk/aws-service-spec

L1 CloudFormation resource definition changes:

├[~] service aws-amazonmq
│ └ resources
│    └[~] resource AWS::AmazonMQ::Broker
│      └ attributes
│         ├ AmqpEndpoints: (documentation changed)
│         ├ IpAddresses: (documentation changed)
│         ├ MqttEndpoints: (documentation changed)
│         ├ OpenWireEndpoints: (documentation changed)
│         ├ StompEndpoints: (documentation changed)
│         └ WssEndpoints: (documentation changed)
├[~] service aws-amplify
│ └ resources
│    └[~] resource AWS::Amplify::Domain
│      └ attributes
│         └ AutoSubDomainCreationPatterns: (documentation changed)
├[~] service aws-appconfig
│ └ resources
│    ├[~] resource AWS::AppConfig::Environment
│    │ └ attributes
│    │    └[-] Id: string
│    └[~] resource AWS::AppConfig::HostedConfigurationVersion
│      └ attributes
│         └[-] Id: string
├[~] service aws-appstream
│ └ resources
│    ├[~] resource AWS::AppStream::Fleet
│    │ ├ properties
│    │ │  ├ IdleDisconnectTimeoutInSeconds: (documentation changed)
│    │ │  └ MaxSessionsPerInstance: (documentation changed)
│    │ └ types
│    │    └[~] type ComputeCapacity
│    │      └ properties
│    │         └ DesiredSessions: (documentation changed)
│    └[~] resource AWS::AppStream::Stack
│      └ types
│         └[~] type UserSetting
│           └ properties
│              └ MaximumLength: (documentation changed)
├[~] service aws-appsync
│ └ resources
│    ├[~] resource AWS::AppSync::ApiCache
│    │ └ properties
│    │    └[+] HealthMetricsConfig: string
│    ├[~] resource AWS::AppSync::DataSource
│    │ └ properties
│    │    └[+] MetricsConfig: string
│    ├[~] resource AWS::AppSync::GraphQLApi
│    │ ├ properties
│    │ │  ├[+] EnhancedMetricsConfig: EnhancedMetricsConfig
│    │ │  └ EnvironmentVariables: (documentation changed)
│    │ └ types
│    │    └[+] type EnhancedMetricsConfig
│    │      ├  documentation: Describes an enhanced metrics configuration.
│    │      │  name: EnhancedMetricsConfig
│    │      └ properties
│    │         ├OperationLevelMetricsConfig: string (required)
│    │         ├ResolverLevelMetricsBehavior: string (required)
│    │         └DataSourceLevelMetricsBehavior: string (required)
│    └[~] resource AWS::AppSync::Resolver
│      └ properties
│         └[+] MetricsConfig: string
├[~] service aws-autoscaling
│ └ resources
│    ├[~] resource AWS::AutoScaling::AutoScalingGroup
│    │ ├  - documentation: The `AWS::AutoScaling::AutoScalingGroup` resource defines an Amazon EC2 Auto Scaling group, which is a collection of Amazon EC2 instances that are treated as a logical grouping for the purposes of automatic scaling and management.
│    │ │  For more information about Amazon EC2 Auto Scaling, see the [Amazon EC2 Auto Scaling User Guide](https://docs.aws.amazon.com/autoscaling/ec2/userguide/what-is-amazon-ec2-auto-scaling.html) .
│    │ │  > Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a [launch template](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) or a launch configuration. We strongly recommend that you do not use launch configurations. They do not provide full functionality for Amazon EC2 Auto Scaling or Amazon EC2. For more information, see [Launch configurations](https://docs.aws.amazon.com/autoscaling/ec2/userguide/launch-configurations.html) and [Migrate AWS CloudFormation stacks from launch configurations to launch templates](https://docs.aws.amazon.com/autoscaling/ec2/userguide/migrate-launch-configurations-with-cloudformation.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │ │  + documentation: The `AWS::AutoScaling::AutoScalingGroup` resource defines an Amazon EC2 Auto Scaling group, which is a collection of Amazon EC2 instances that are treated as a logical grouping for the purposes of automatic scaling and management.
│    │ │  For more information about Amazon EC2 Auto Scaling, see the [Amazon EC2 Auto Scaling User Guide](https://docs.aws.amazon.com/autoscaling/ec2/userguide/what-is-amazon-ec2-auto-scaling.html) .
│    │ │  > Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a [launch template](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) or a launch configuration. We strongly recommend that you do not use launch configurations. For more information, see [Launch configurations](https://docs.aws.amazon.com/autoscaling/ec2/userguide/launch-configurations.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │ │  > 
│    │ │  > For help migrating from launch configurations to launch templates, see [Migrate AWS CloudFormation stacks from launch configurations to launch templates](https://docs.aws.amazon.com/autoscaling/ec2/userguide/migrate-launch-configurations-with-cloudformation.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │ └ types
│    │    ├[~] type InstanceRequirements
│    │    │ └  - documentation: The attributes for the instance types for a mixed instances policy. Amazon EC2 Auto Scaling uses your specified requirements to identify instance types. Then, it uses your On-Demand and Spot allocation strategies to launch instances from these instance types.
│    │    │    When you specify multiple attributes, you get instance types that satisfy all of the specified attributes. If you specify multiple values for an attribute, you get instance types that satisfy any of the specified values.
│    │    │    To limit the list of instance types from which Amazon EC2 Auto Scaling can identify matching instance types, you can use one of the following parameters, but not both in the same request:
│    │    │    - `AllowedInstanceTypes` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
│    │    │    - `ExcludedInstanceTypes` - The instance types to exclude from the list, even if they match your specified attributes.
│    │    │    > You must specify `VCpuCount` and `MemoryMiB` . All other attributes are optional. Any unspecified optional attribute is set to its default. 
│    │    │    For an example template, see [Auto scaling template snippets](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-autoscaling.html) .
│    │    │    For more information, see [Creating an Auto Scaling group using attribute-based instance type selection](https://docs.aws.amazon.com/autoscaling/ec2/userguide/create-asg-instance-type-requirements.html) in the *Amazon EC2 Auto Scaling User Guide* . For help determining which instance types match your attributes before you apply them to your Auto Scaling group, see [Preview instance types with specified attributes](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-attribute-based-instance-type-selection.html#ec2fleet-get-instance-types-from-instance-requirements) in the *Amazon EC2 User Guide for Linux Instances* .
│    │    │    `InstanceRequirements` is a property of the `LaunchTemplateOverrides` property of the [AWS::AutoScaling::AutoScalingGroup LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplate.html) property type.
│    │    │    + documentation: The attributes for the instance types for a mixed instances policy. Amazon EC2 Auto Scaling uses your specified requirements to identify instance types. Then, it uses your On-Demand and Spot allocation strategies to launch instances from these instance types.
│    │    │    When you specify multiple attributes, you get instance types that satisfy all of the specified attributes. If you specify multiple values for an attribute, you get instance types that satisfy any of the specified values.
│    │    │    To limit the list of instance types from which Amazon EC2 Auto Scaling can identify matching instance types, you can use one of the following parameters, but not both in the same request:
│    │    │    - `AllowedInstanceTypes` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
│    │    │    - `ExcludedInstanceTypes` - The instance types to exclude from the list, even if they match your specified attributes.
│    │    │    > You must specify `VCpuCount` and `MemoryMiB` . All other attributes are optional. Any unspecified optional attribute is set to its default. 
│    │    │    For an example template, see [Configure Amazon EC2 Auto Scaling resources](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-ec2-auto-scaling.html) .
│    │    │    For more information, see [Creating an Auto Scaling group using attribute-based instance type selection](https://docs.aws.amazon.com/autoscaling/ec2/userguide/create-asg-instance-type-requirements.html) in the *Amazon EC2 Auto Scaling User Guide* . For help determining which instance types match your attributes before you apply them to your Auto Scaling group, see [Preview instance types with specified attributes](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-attribute-based-instance-type-selection.html#ec2fleet-get-instance-types-from-instance-requirements) in the *Amazon EC2 User Guide for Linux Instances* .
│    │    │    `InstanceRequirements` is a property of the `LaunchTemplateOverrides` property of the [AWS::AutoScaling::AutoScalingGroup LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplate.html) property type.
│    │    ├[~] type LaunchTemplateSpecification
│    │    │ └  - documentation: Specifies a launch template to use when provisioning EC2 instances for an Auto Scaling group.
│    │    │    You must specify the following:
│    │    │    - The ID or the name of the launch template, but not both.
│    │    │    - The version of the launch template.
│    │    │    `LaunchTemplateSpecification` is property of the [AWS::AutoScaling::AutoScalingGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-autoscaling-autoscalinggroup.html) resource. It is also a property of the [AWS::AutoScaling::AutoScalingGroup LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplate.html) and [AWS::AutoScaling::AutoScalingGroup LaunchTemplateOverrides](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplateoverrides.html) property types.
│    │    │    For information about creating a launch template, see [AWS::EC2::LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) and [Create a launch template for an Auto Scaling group](https://docs.aws.amazon.com/autoscaling/ec2/userguide/create-launch-template.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │    │    For examples of launch templates, see [Auto scaling template snippets](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-autoscaling.html) and the [Examples](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html#aws-resource-ec2-launchtemplate--examples) section in the `AWS::EC2::LaunchTemplate` resource.
│    │    │    + documentation: Specifies a launch template to use when provisioning EC2 instances for an Auto Scaling group.
│    │    │    You must specify the following:
│    │    │    - The ID or the name of the launch template, but not both.
│    │    │    - The version of the launch template.
│    │    │    `LaunchTemplateSpecification` is property of the [AWS::AutoScaling::AutoScalingGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-autoscaling-autoscalinggroup.html) resource. It is also a property of the [AWS::AutoScaling::AutoScalingGroup LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplate.html) and [AWS::AutoScaling::AutoScalingGroup LaunchTemplateOverrides](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-autoscaling-autoscalinggroup-launchtemplateoverrides.html) property types.
│    │    │    For information about creating a launch template, see [AWS::EC2::LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) and [Create a launch template for an Auto Scaling group](https://docs.aws.amazon.com/autoscaling/ec2/userguide/create-launch-template.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │    │    For examples of launch templates, see [Create launch templates](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-ec2-launch-templates.html) .
│    │    └[~] type NotificationConfiguration
│    │      └  - documentation: A structure that specifies an Amazon SNS notification configuration for the `NotificationConfigurations` property of the [AWS::AutoScaling::AutoScalingGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-autoscaling-autoscalinggroup.html) resource.
│    │         For an example template snippet, see [Auto scaling template snippets](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-autoscaling.html) .
│    │         For more information, see [Get Amazon SNS notifications when your Auto Scaling group scales](https://docs.aws.amazon.com/autoscaling/ec2/userguide/ASGettingNotifications.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │         + documentation: A structure that specifies an Amazon SNS notification configuration for the `NotificationConfigurations` property of the [AWS::AutoScaling::AutoScalingGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-autoscaling-autoscalinggroup.html) resource.
│    │         For an example template snippet, see [Configure Amazon EC2 Auto Scaling resources](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-ec2-auto-scaling.html) .
│    │         For more information, see [Get Amazon SNS notifications when your Auto Scaling group scales](https://docs.aws.amazon.com/autoscaling/ec2/userguide/ASGettingNotifications.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    ├[~] resource AWS::AutoScaling::LaunchConfiguration
│    │ └  - documentation: The `AWS::AutoScaling::LaunchConfiguration` resource specifies the launch configuration that can be used by an Auto Scaling group to configure Amazon EC2 instances.
│    │    When you update the launch configuration for an Auto Scaling group, CloudFormation deletes that resource and creates a new launch configuration with the updated properties and a new name. Existing instances are not affected. To update existing instances when you update the `AWS::AutoScaling::LaunchConfiguration` resource, you can specify an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) for the group. You can find sample update policies for rolling updates in [Auto scaling template snippets](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-autoscaling.html) .
│    │    > Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a [launch template](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) or a launch configuration. We strongly recommend that you do not use launch configurations. They do not provide full functionality for Amazon EC2 Auto Scaling or Amazon EC2. For more information, see [Launch configurations](https://docs.aws.amazon.com/autoscaling/ec2/userguide/launch-configurations.html) and [Migrate AWS CloudFormation stacks from launch configurations to launch templates](https://docs.aws.amazon.com/autoscaling/ec2/userguide/migrate-launch-configurations-with-cloudformation.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │    + documentation: The `AWS::AutoScaling::LaunchConfiguration` resource specifies the launch configuration that can be used by an Auto Scaling group to configure Amazon EC2 instances.
│    │    When you update the launch configuration for an Auto Scaling group, CloudFormation deletes that resource and creates a new launch configuration with the updated properties and a new name. Existing instances are not affected. To update existing instances when you update the `AWS::AutoScaling::LaunchConfiguration` resource, you can specify an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) for the group. You can find sample update policies for rolling updates in [Configure Amazon EC2 Auto Scaling resources](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-ec2-auto-scaling.html) .
│    │    > Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a [launch template](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html) or a launch configuration. We strongly recommend that you do not use launch configurations. For more information, see [Launch configurations](https://docs.aws.amazon.com/autoscaling/ec2/userguide/launch-configurations.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    │    > 
│    │    > For help migrating from launch configurations to launch templates, see [Migrate AWS CloudFormation stacks from launch configurations to launch templates](https://docs.aws.amazon.com/autoscaling/ec2/userguide/migrate-launch-configurations-with-cloudformation.html) in the *Amazon EC2 Auto Scaling User Guide* .
│    └[~] resource AWS::AutoScaling::ScheduledAction
│      └  - documentation: The `AWS::AutoScaling::ScheduledAction` resource specifies an Amazon EC2 Auto Scaling scheduled action so that the Auto Scaling group can change the number of instances available for your application in response to predictable load changes.
│         When you update a stack with an Auto Scaling group and scheduled action, CloudFormation always sets the min size, max size, and desired capacity properties of your group to the values that are defined in the `AWS::AutoScaling::AutoScalingGroup` section of your template. However, you might not want CloudFormation to do that when you have a scheduled action in effect. You can use an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) to prevent CloudFormation from changing the min size, max size, or desired capacity property values during a stack update unless you modified the individual values in your template. If you have rolling updates enabled, before you can update the Auto Scaling group, you must suspend scheduled actions by specifying an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) for the Auto Scaling group. You can find a sample update policy for rolling updates in [Auto scaling template snippets](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-autoscaling.html) .
│         For more information, see [Scheduled scaling](https://docs.aws.amazon.com/autoscaling/ec2/userguide/schedule_time.html) and [Suspending and resuming scaling processes](https://docs.aws.amazon.com/autoscaling/ec2/userguide/as-suspend-resume-processes.html) in the *Amazon EC2 Auto Scaling User Guide* .
│         + documentation: The `AWS::AutoScaling::ScheduledAction` resource specifies an Amazon EC2 Auto Scaling scheduled action so that the Auto Scaling group can change the number of instances available for your application in response to predictable load changes.
│         When you update a stack with an Auto Scaling group and scheduled action, CloudFormation always sets the min size, max size, and desired capacity properties of your group to the values that are defined in the `AWS::AutoScaling::AutoScalingGroup` section of your template. However, you might not want CloudFormation to do that when you have a scheduled action in effect. You can use an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) to prevent CloudFormation from changing the min size, max size, or desired capacity property values during a stack update unless you modified the individual values in your template. If you have rolling updates enabled, before you can update the Auto Scaling group, you must suspend scheduled actions by specifying an [UpdatePolicy attribute](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html) for the Auto Scaling group. You can find a sample update policy for rolling updates in [Configure Amazon EC2 Auto Scaling resources](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/quickref-ec2-auto-scaling.html) .
│         For more information, see [Scheduled scaling](https://docs.aws.amazon.com/autoscaling/ec2/userguide/schedule_time.html) and [Suspending and resuming scaling processes](https://docs.aws.amazon.com/autoscaling/ec2/userguide/as-suspend-resume-processes.html) in the *Amazon EC2 Auto Scaling User Guide* .
├[~] service aws-batch
│ └ resources
│    └[~] resource AWS::Batch::JobDefinition
│      └ types
│         ├[~] type ContainerProperties
│         │ └ properties
│         │    └[+] RepositoryCredentials: RepositoryCredentials
│         ├[~] type Metadata
│         │ ├  - documentation: undefined
│         │ │  + documentation: Metadata about the Kubernetes pod. For more information, see [Understanding Kubernetes Objects](https://docs.aws.amazon.com/https://kubernetes.io/docs/concepts/overview/working-with-objects/kubernetes-objects/) in the *Kubernetes documentation* .
│         │ └ properties
│         │    └ Labels: (documentation changed)
│         ├[~] type PodProperties
│         │ ├  - documentation: undefined
│         │ │  + documentation: The properties for the pod.
│         │ └ properties
│         │    ├ Containers: (documentation changed)
│         │    ├ DnsPolicy: (documentation changed)
│         │    ├ HostNetwork: (documentation changed)
│         │    ├ Metadata: (documentation changed)
│         │    ├ ServiceAccountName: (documentation changed)
│         │    └ Volumes: (documentation changed)
│         └[+] type RepositoryCredentials
│           ├  documentation: The repository credentials for private registry authentication.
│           │  name: RepositoryCredentials
│           └ properties
│              └CredentialsParameter: string (required)
├[~] service aws-cleanrooms
│ └ resources
│    └[~] resource AWS::CleanRooms::AnalysisTemplate
│      └ attributes
│         └ Schema: (documentation changed)
├[~] service aws-cloudformation
│ └ resources
│    ├[~] resource AWS::CloudFormation::Stack
│    │ └ attributes
│    │    └ Outputs: (documentation changed)
│    └[~] resource AWS::CloudFormation::WaitCondition
│      └ attributes
│         └ Data: (documentation changed)
├[~] service aws-cloudfront
│ └ resources
│    ├[~] resource AWS::CloudFront::Distribution
│    │ └ types
│    │    ├[~] type DistributionConfig
│    │    │ └ properties
│    │    │    ├ CNAMEs: (documentation changed)
│    │    │    ├ CustomOrigin: (documentation changed)
│    │    │    ├ S3Origin: (documentation changed)
│    │    │    └ WebACLId: (documentation changed)
│    │    ├[~] type LegacyCustomOrigin
│    │    │ └ properties
│    │    │    ├ DNSName: (documentation changed)
│    │    │    ├ HTTPPort: (documentation changed)
│    │    │    ├ HTTPSPort: (documentation changed)
│    │    │    ├ OriginProtocolPolicy: (documentation changed)
│    │    │    └ OriginSSLProtocols: (documentation changed)
│    │    ├[~] type LegacyS3Origin
│    │    │ └ properties
│    │    │    ├ DNSName: (documentation changed)
│    │    │    └ OriginAccessIdentity: (documentation changed)
│    │    └[~] type S3OriginConfig
│    │      └ properties
│    │         └ OriginAccessIdentity: (documentation changed)
│    └[~] resource AWS::CloudFront::Function
│      └ attributes
│         └ FunctionMetadata.FunctionARN: (documentation changed)
├[~] service aws-cloudtrail
│ └ resources
│    ├[~] resource AWS::CloudTrail::EventDataStore
│    │ └ types
│    │    └[~] type AdvancedFieldSelector
│    │      └ properties
│    │         └ Field: (documentation changed)
│    └[~] resource AWS::CloudTrail::Trail
│      └ types
│         └[~] type AdvancedFieldSelector
│           └ properties
│              └ Field: (documentation changed)
├[~] service aws-cloudwatch
│ └ resources
│    └[~] resource AWS::CloudWatch::AnomalyDetector
│      ├  - documentation: The `AWS::CloudWatch::AnomalyDetector` type specifies an anomaly detection band for a certain metric and statistic. The band represents the expected "normal" range for the metric values. Anomaly detection bands can be used for visualization of a metric's expected values, and for alarms.
│      │  + documentation: The `AWS::CloudWatch::AnomalyDetector` type specifies an anomaly detection band for a certain metric and statistic. The band represents the expected "normal" range for the metric values. Anomaly detection bands can be used for visualization of a metric's expected values, and for alarms.
│      │  For more information see [Using CloudWatch anomaly detection.](https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch_Anomaly_Detection.html) .
│      └ types
│         └[~] type SingleMetricAnomalyDetector
│           └  - documentation: Designates the CloudWatch metric and statistic that provides the time series the anomaly detector uses as input.
│              + documentation: Designates the CloudWatch metric and statistic that provides the time series the anomaly detector uses as input. If you have enabled unified cross-account observability, and this account is a monitoring account, the metric can be in the same account or a source account.
├[~] service aws-codepipeline
│ └ resources
│    └[~] resource AWS::CodePipeline::Pipeline
│      ├  - documentation: The `AWS::CodePipeline::Pipeline` resource creates a CodePipeline pipeline that describes how software changes go through a release process. For more information, see [What Is CodePipeline?](https://docs.aws.amazon.com/codepipeline/latest/userguide/welcome.html) in the *AWS CodePipeline User Guide* .
│      │  + documentation: The `AWS::CodePipeline::Pipeline` resource creates a CodePipeline pipeline that describes how software changes go through a release process. For more information, see [What Is CodePipeline?](https://docs.aws.amazon.com/codepipeline/latest/userguide/welcome.html) in the *CodePipeline User Guide* .
│      │  For an example in YAML and JSON that contains the parameters in this reference, see [Examples](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-codepipeline-pipeline.html#aws-resource-codepipeline-pipeline--examples) .
│      ├ properties
│      │  ├[+] ExecutionMode: string
│      │  └ PipelineType: (documentation changed)
│      └ types
│         ├[~] type ActionDeclaration
│         │ └  - documentation: Represents information about an action declaration.
│         │    + documentation: Represents information about an action declaration.
│         │    > Documentation for the `timeoutInMinutes` parameter in the `ActionDeclaration` is not yet available for CloudFormation and CDK resources in CodePipeline. For more information about the configurable timeout for manual approval actions, see the [ActionDeclaration](https://docs.aws.amazon.com/codepipeline/latest/APIReference/API_ActionDeclaration.html) in the CodePipeline API Reference.
│         ├[+] type GitBranchFilterCriteria
│         │ ├  documentation: The Git repository branches specified as filter criteria to start the pipeline.
│         │ │  name: GitBranchFilterCriteria
│         │ └ properties
│         │    ├Includes: Array<string>
│         │    └Excludes: Array<string>
│         ├[~] type GitConfiguration
│         │ └ properties
│         │    ├[+] PullRequest: Array<GitPullRequestFilter>
│         │    └ Push: (documentation changed)
│         ├[+] type GitFilePathFilterCriteria
│         │ ├  documentation: The Git repository file paths specified as filter criteria to start the pipeline.
│         │ │  name: GitFilePathFilterCriteria
│         │ └ properties
│         │    ├Includes: Array<string>
│         │    └Excludes: Array<string>
│         ├[+] type GitPullRequestFilter
│         │ ├  documentation: The event criteria for the pull request trigger configuration, such as the lists of branches or file paths to include and exclude.
│         │ │  name: GitPullRequestFilter
│         │ └ properties
│         │    ├FilePaths: GitFilePathFilterCriteria
│         │    ├Events: Array<string>
│         │    └Branches: GitBranchFilterCriteria
│         └[~] type GitPushFilter
│           └ properties
│              ├[+] Branches: GitBranchFilterCriteria
│              └[+] FilePaths: GitFilePathFilterCriteria
├[~] service aws-cognito
│ └ resources
│    └[~] resource AWS::Cognito::UserPoolRiskConfigurationAttachment
│      └ attributes
│         └[-] Id: string
├[~] service aws-config
│ └ resources
│    └[~] resource AWS::Config::ConformancePack
│      └ types
│         └[~] type TemplateSSMDocumentDetails
│           └ properties
│              └ DocumentName: (documentation changed)
├[~] service aws-connect
│ └ resources
│    └[~] resource AWS::Connect::User
│      └ types
│         ├[~] type UserIdentityInfo
│         │ └  - documentation: Contains information about the identity of a user.
│         │    + documentation: Contains information about the identity of a user.
│         │    > For Amazon Connect instances that are created with the `EXISTING_DIRECTORY` identity management type, `FirstName` , `LastName` , and `Email` cannot be updated from within Amazon Connect because they are managed by the directory.
│         └[~] type UserPhoneConfig
│           └ properties
│              └ AfterContactWorkTimeLimit: (documentation changed)
├[~] service aws-controltower
│ └ resources
│    ├[+] resource AWS::ControlTower::EnabledBaseline
│    │ ├  name: EnabledBaseline
│    │ │  cloudFormationType: AWS::ControlTower::EnabledBaseline
│    │ │  documentation: This resource represents a `Baseline` that has been applied to a target.
│    │ │  tagInformation: {"tagPropertyName":"Tags","variant":"standard"}
│    │ ├ properties
│    │ │  ├BaselineIdentifier: string (required, immutable)
│    │ │  ├BaselineVersion: string (required)
│    │ │  ├TargetIdentifier: string (required, immutable)
│    │ │  ├Parameters: Array<Parameter>
│    │ │  └Tags: Array<tag>
│    │ ├ attributes
│    │ │  └EnabledBaselineIdentifier: string
│    │ └ types
│    │    └type Parameter
│    │     ├  documentation: A key-value parameter to an `EnabledBaseline` resource.
│    │     │  name: Parameter
│    │     └ properties
│    │        ├Key: string
│    │        └Value: string | json | number | Array<boolean | number | json | string> | boolean
│    ├[~] resource AWS::ControlTower::EnabledControl
│    │ ├  - tagInformation: undefined
│    │ │  + tagInformation: {"tagPropertyName":"Tags","variant":"standard"}
│    │ └ properties
│    │    ├ ControlIdentifier: (documentation changed)
│    │    └[+] Tags: Array<tag>
│    └[~] resource AWS::ControlTower::LandingZone
│      ├ properties
│      │  └ Manifest: (documentation changed)
│      └ attributes
│         └ Status: (documentation changed)
├[~] service aws-datasync
│ └ resources
│    └[~] resource AWS::DataSync::Task
│      └ attributes
│         ├ DestinationNetworkInterfaceArns: (documentation changed)
│         └ SourceNetworkInterfaceArns: (documentation changed)
├[~] service aws-directoryservice
│ └ resources
│    ├[~] resource AWS::DirectoryService::MicrosoftAD
│    │ └ attributes
│    │    └ DnsIpAddresses: (documentation changed)
│    └[~] resource AWS::DirectoryService::SimpleAD
│      └ attributes
│         └ DnsIpAddresses: (documentation changed)
├[~] service aws-ec2
│ └ resources
│    ├[~] resource AWS::EC2::EC2Fleet
│    │ └ types
│    │    └[~] type InstanceRequirementsRequest
│    │      └ properties
│    │         └[+] MaxSpotPriceAsPercentageOfOptimalOnDemandPrice: integer
│    ├[~] resource AWS::EC2::LaunchTemplate
│    │ └ types
│    │    └[~] type MaintenanceOptions
│    │      └ properties
│    │         └ RebootMigration: (documentation changed)
│    ├[~] resource AWS::EC2::NetworkInsightsAnalysis
│    │ └ attributes
│    │    ├ AlternatePathHints: (documentation changed)
│    │    ├ Explanations: (documentation changed)
│    │    ├ ForwardPathComponents: (documentation changed)
│    │    ├ ReturnPathComponents: (documentation changed)
│    │    └ SuggestedAccounts: (documentation changed)
│    ├[~] resource AWS::EC2::NetworkInterface
│    │ └ attributes
│    │    └ SecondaryPrivateIpAddresses: (documentation changed)
│    ├[~] resource AWS::EC2::PrefixList
│    │ └ properties
│    │    └ MaxEntries: - integer (required)
│    │                  + integer
│    ├[~] resource AWS::EC2::SecurityGroupEgress
│    │ └ attributes
│    │    └ Id: (documentation changed)
│    ├[~] resource AWS::EC2::SpotFleet
│    │ └ types
│    │    └[~] type InstanceRequirementsRequest
│    │      └ properties
│    │         └[+] MaxSpotPriceAsPercentageOfOptimalOnDemandPrice: integer
│    ├[~] resource AWS::EC2::TransitGatewayPeeringAttachment
│    │ └ attributes
│    │    └ Status: (documentation changed)
│    ├[~] resource AWS::EC2::VPC
│    │ └ attributes
│    │    ├ CidrBlockAssociations: (documentation changed)
│    │    └ Ipv6CidrBlocks: (documentation changed)
│    └[~] resource AWS::EC2::VPCEndpoint
│      └ attributes
│         ├ DnsEntries: (documentation changed)
│         └ NetworkInterfaceIds: (documentation changed)
├[~] service aws-ecs
│ └ resources
│    └[~] resource AWS::ECS::TaskDefinition
│      └ types
│         └[~] type KernelCapabilities
│           └  - documentation: The `KernelCapabilities` property specifies the Linux capabilities for the container that are added to or dropped from the default configuration that is provided by Docker. For more information on the default capabilities and the non-default available capabilities, see [Runtime privilege and Linux capabilities](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities) in the *Docker run reference* . For more detailed information on these Linux capabilities, see the [capabilities(7)](https://docs.aws.amazon.com/http://man7.org/linux/man-pages/man7/capabilities.7.html) Linux manual page.
│              + documentation: The Linux capabilities to add or remove from the default Docker configuration for a container defined in the task definition. For more information about the default capabilities and the non-default available capabilities, see [Runtime privilege and Linux capabilities](https://docs.aws.amazon.com/https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities) in the *Docker run reference* . For more detailed information about these Linux capabilities, see the [capabilities(7)](https://docs.aws.amazon.com/http://man7.org/linux/man-pages/man7/capabilities.7.html) Linux manual page.
├[~] service aws-eks
│ └ resources
│    └[~] resource AWS::EKS::Cluster
│      └ attributes
│         └ KubernetesNetworkConfig.ServiceIpv6Cidr: (documentation changed)
├[~] service aws-elasticache
│ └ resources
│    ├[~] resource AWS::ElastiCache::CacheCluster
│    │ └ properties
│    │    └ PreferredMaintenanceWindow: (documentation changed)
│    ├[~] resource AWS::ElastiCache::ParameterGroup
│    │ └ attributes
│    │    └[+] CacheParameterGroupName: string
│    ├[~] resource AWS::ElastiCache::ReplicationGroup
│    │ └ attributes
│    │    ├ ReadEndPoint.Addresses.List: (documentation changed)
│    │    └ ReadEndPoint.Ports.List: (documentation changed)
│    ├[~] resource AWS::ElastiCache::ServerlessCache
│    │ ├ properties
│    │ │  ├ Endpoint: (documentation changed)
│    │ │  └ ReaderEndpoint: (documentation changed)
│    │ └ types
│    │    └[~] type Endpoint
│    │      └  - documentation: Represents the information required for client programs to connect to a cache node.
│    │         + documentation: Represents the information required for client programs to connect to a cache node. This value is read-only.
│    └[~] resource AWS::ElastiCache::User
│      └ properties
│         └ AuthenticationMode: (documentation changed)
├[~] service aws-elasticloadbalancingv2
│ └ resources
│    ├[~] resource AWS::ElasticLoadBalancingV2::LoadBalancer
│    │ └ attributes
│    │    └ SecurityGroups: (documentation changed)
│    ├[~] resource AWS::ElasticLoadBalancingV2::TargetGroup
│    │ └ attributes
│    │    └ LoadBalancerArns: (documentation changed)
│    └[~] resource AWS::ElasticLoadBalancingV2::TrustStoreRevocation
│      └ attributes
│         └ TrustStoreRevocations: (documentation changed)
├[~] service aws-emr
│ └ resources
│    └[~] resource AWS::EMR::Cluster
│      └ types
│         └[~] type JobFlowInstancesConfig
│           └ properties
│              └[+] UnhealthyNodeReplacement: boolean
├[~] service aws-frauddetector
│ └ resources
│    └[~] resource AWS::FraudDetector::Detector
│      └ attributes
│         ├ EventType.Arn: (documentation changed)
│         ├ EventType.CreatedTime: (documentation changed)
│         └ EventType.LastUpdatedTime: (documentation changed)
├[~] service aws-globalaccelerator
│ └ resources
│    └[~] resource AWS::GlobalAccelerator::Accelerator
│      └ attributes
│         ├ Ipv4Addresses: (documentation changed)
│         └ Ipv6Addresses: (documentation changed)
├[~] service aws-glue
│ └ resources
│    ├[~] resource AWS::Glue::Classifier
│    │ └ types
│    │    └[~] type CsvClassifier
│    │      └ properties
│    │         ├ ContainsCustomDatatype: (documentation changed)
│    │         └ CustomDatatypeConfigured: (documentation changed)
│    ├[~] resource AWS::Glue::Crawler
│    │ └ types
│    │    ├[~] type IcebergTarget
│    │    │ ├  - documentation: Specifies an Apache Iceberg data source where Iceberg tables are stored in Amazon S3.
│    │    │ │  + documentation: Specifies Apache Iceberg data store targets.
│    │    │ └ properties
│    │    │    ├ Exclusions: (documentation changed)
│    │    │    └ Paths: (documentation changed)
│    │    └[~] type Targets
│    │      └ properties
│    │         └ IcebergTargets: (documentation changed)
│    ├[~] resource AWS::Glue::CustomEntityType
│    │ └ properties
│    │    └ Tags: (documentation changed)
│    ├[~] resource AWS::Glue::Database
│    │ └ types
│    │    └[~] type DatabaseIdentifier
│    │      └ properties
│    │         └ Region: (documentation changed)
│    ├[~] resource AWS::Glue::DataCatalogEncryptionSettings
│    │ └ types
│    │    └[~] type EncryptionAtRest
│    │      └ properties
│    │         └[+] CatalogEncryptionServiceRole: string
│    ├[~] resource AWS::Glue::Table
│    │ ├ properties
│    │ │  └ OpenTableFormatInput: (documentation changed)
│    │ └ types
│    │    ├[~] type IcebergInput
│    │    │ ├  - documentation: A structure that defines an Apache Iceberg metadata table to create in the catalog.
│    │    │ │  + documentation: Specifies an input structure that defines an Apache Iceberg metadata table.
│    │    │ └ properties
│    │    │    └ MetadataOperation: (documentation changed)
│    │    ├[~] type OpenTableFormatInput
│    │    │ └  - documentation: A structure representing an open format table.
│    │    │    + documentation: Specifies an `OpenTableFormatInput` structure when creating an open format table.
│    │    └[~] type TableIdentifier
│    │      └ properties
│    │         └ Region: (documentation changed)
│    └[~] resource AWS::Glue::TableOptimizer
│      ├  - documentation: Resource Type definition for AWS::Glue::TableOptimizer
│      │  + documentation: A resource that describes the AWS Glue resource for enabling compaction to improve read performance for open table formats.
│      ├ properties
│      │  ├ CatalogId: (documentation changed)
│      │  └ Type: (documentation changed)
│      └ types
│         └[~] type TableOptimizerConfiguration
│           ├  - documentation: undefined
│           │  + documentation: Specifies configuration details of a table optimizer.
│           └ properties
│              ├ Enabled: - boolean
│              │          + boolean (required)
│              │          (documentation changed)
│              └ RoleArn: - string
│                         + string (required)
│                         (documentation changed)
├[~] service aws-groundstation
│ └ resources
│    └[~] resource AWS::GroundStation::MissionProfile
│      └ properties
│         ├ ContactPostPassDurationSeconds: (documentation changed)
│         └ ContactPrePassDurationSeconds: (documentation changed)
├[~] service aws-guardduty
│ └ resources
│    ├[~] resource AWS::GuardDuty::Master
│    │ └ properties
│    │    └ MasterId: (documentation changed)
│    └[~] resource AWS::GuardDuty::Member
│      └ properties
│         ├ DetectorId: - string (required, immutable)
│         │             + string (immutable)
│         └ MemberId: - string (required, immutable)
│                     + string (immutable)
│                     (documentation changed)
├[~] service aws-imagebuilder
│ └ resources
│    ├[~] resource AWS::ImageBuilder::Image
│    │ ├  - documentation: An image build version. An image is a customized, secure, and up-to-date “golden” server image that is pre-installed and pre-configured with software and settings to meet specific IT standards.
│    │ │  + documentation: Creates a new image. This request will create a new image along with all of the configured output resources defined in the distribution configuration. You must specify exactly one recipe for your image, using either a ContainerRecipeArn or an ImageRecipeArn.
│    │ ├ properties
│    │ │  ├ ContainerRecipeArn: (documentation changed)
│    │ │  ├ DistributionConfigurationArn: (documentation changed)
│    │ │  ├ EnhancedImageMetadataEnabled: (documentation changed)
│    │ │  ├ ImageRecipeArn: (documentation changed)
│    │ │  ├ ImageTestsConfiguration: (documentation changed)
│    │ │  ├ InfrastructureConfigurationArn: (documentation changed)
│    │ │  └ Workflows: (documentation changed)
│    │ └ attributes
│    │    └ ImageUri: (documentation changed)
│    ├[~] resource AWS::ImageBuilder::LifecyclePolicy
│    │ ├  - documentation: The configuration details for a lifecycle policy resource.
│    │ │  + documentation: Create a lifecycle policy resource.
│    │ ├ properties
│    │ │  ├ ExecutionRole: (documentation changed)
│    │ │  ├ Name: (documentation changed)
│    │ │  ├ PolicyDetails: (documentation changed)
│    │ │  ├ ResourceSelection: (documentation changed)
│    │ │  ├ ResourceType: (documentation changed)
│    │ │  └ Tags: (documentation changed)
│    │ └ types
│    │    ├[~] type Action
│    │    │ ├  - documentation: The action of the policy detail.
│    │    │ │  + documentation: Contains selection criteria for the lifecycle policy.
│    │    │ └ properties
│    │    │    ├ IncludeResources: (documentation changed)
│    │    │    └ Type: (documentation changed)
│    │    ├[~] type AmiExclusionRules
│    │    │ ├  - documentation: The AMI exclusion rules for the policy detail.
│    │    │ │  + documentation: Defines criteria for AMIs that are excluded from lifecycle actions.
│    │    │ └ properties
│    │    │    ├ IsPublic: (documentation changed)
│    │    │    ├ LastLaunched: (documentation changed)
│    │    │    ├ Regions: (documentation changed)
│    │    │    ├ SharedAccounts: (documentation changed)
│    │    │    └ TagMap: (documentation changed)
│    │    ├[~] type ExclusionRules
│    │    │ ├  - documentation: The exclusion rules to apply of the policy detail.
│    │    │ │  + documentation: Specifies resources that lifecycle policy actions should not apply to.
│    │    │ └ properties
│    │    │    ├ Amis: (documentation changed)
│    │    │    └ TagMap: (documentation changed)
│    │    ├[~] type Filter
│    │    │ ├  - documentation: A filter name and value pair that is used to return a more specific list of results from a list operation. Filters can be used to match a set of resources by specific criteria, such as tags, attributes, or IDs.
│    │    │ │  + documentation: Defines filters that the lifecycle policy uses to determine impacted resource.
│    │    │ └ properties
│    │    │    ├ RetainAtLeast: (documentation changed)
│    │    │    ├ Type: (documentation changed)
│    │    │    ├ Unit: (documentation changed)
│    │    │    └ Value: (documentation changed)
│    │    ├[~] type IncludeResources
│    │    │ ├  - documentation: The included resources of the policy detail.
│    │    │ │  + documentation: Specifies how the lifecycle policy should apply actions to selected resources.
│    │    │ └ properties
│    │    │    ├ Amis: (documentation changed)
│    │    │    ├ Containers: (documentation changed)
│    │    │    └ Snapshots: (documentation changed)
│    │    ├[~] type LastLaunched
│    │    │ ├  - documentation: The last launched time of a resource.
│    │    │ │  + documentation: Defines criteria to exclude AMIs from lifecycle actions based on the last time they were used to launch an instance.
│    │    │ └ properties
│    │    │    ├ Unit: (documentation changed)
│    │    │    └ Value: (documentation changed)
│    │    ├[~] type PolicyDetail
│    │    │ ├  - documentation: The policy detail of the lifecycle policy.
│    │    │ │  + documentation: The configuration details for a lifecycle policy resource.
│    │    │ └ properties
│    │    │    ├ Action: (documentation changed)
│    │    │    ├ ExclusionRules: (documentation changed)
│    │    │    └ Filter: (documentation changed)
│    │    ├[~] type RecipeSelection
│    │    │ ├  - documentation: The recipe to apply the lifecycle policy for.
│    │    │ │  + documentation: Specifies an Image Builder recipe that the lifecycle policy uses for resource selection.
│    │    │ └ properties
│    │    │    ├ Name: (documentation changed)
│    │    │    └ SemanticVersion: (documentation changed)
│    │    └[~] type ResourceSelection
│    │      ├  - documentation: The resource selection for the lifecycle policy.
│    │      │  + documentation: Resource selection criteria for the lifecycle policy.
│    │      └ properties
│    │         ├ Recipes: (documentation changed)
│    │         └ TagMap: (documentation changed)
│    └[~] resource AWS::ImageBuilder::Workflow
│      └ properties
│         ├ Data: (documentation changed)
│         ├ Description: (documentation changed)
│         ├ KmsKeyId: (documentation changed)
│         ├ Name: (documentation changed)
│         ├ Tags: (documentation changed)
│         ├ Type: (documentation changed)
│         ├ Uri: (documentation changed)
│         └ Version: (documentation changed)
├[~] service aws-internetmonitor
│ └ resources
│    └[~] resource AWS::InternetMonitor::Monitor
│      └ types
│         ├[~] type InternetMeasurementsLogDelivery
│         │ └ properties
│         │    └ S3Config: (documentation changed)
│         └[~] type S3Config
│           ├  - documentation: The configuration for publishing Amazon CloudWatch Internet Monitor internet measurements to Amazon S3. The configuration includes the bucket name and (optionally) prefix for the S3 bucket to store the measurements, and the delivery status. The delivery status is `ENABLED` or `DISABLED` , depending on whether you choose to deliver internet measurements to S3 logs.
│           │  + documentation: The configuration for publishing Amazon CloudWatch Internet Monitor internet measurements to Amazon S3. The configuration includes the bucket name and (optionally) bucket prefix for the S3 bucket to store the measurements, and the delivery status. The delivery status is `ENABLED` if you choose to deliver internet measurements to S3 logs, and `DISABLED` otherwise.
│           │  The measurements are also published to Amazon CloudWatch Logs.
│           └ properties
│              ├ BucketName: (documentation changed)
│              ├ BucketPrefix: (documentation changed)
│              └ LogDeliveryStatus: (documentation changed)
├[~] service aws-iot
│ └ resources
│    └[~] resource AWS::IoT::DomainConfiguration
│      ├ properties
│      │  └ ServerCertificateConfig: (documentation changed)
│      ├ attributes
│      │  └ ServerCertificates: (documentation changed)
│      └ types
│         └[~] type ServerCertificateConfig
│           ├  - documentation: undefined
│           │  + documentation: The server certificate configuration.
│           │  For more information, see [Configurable endpoints](https://docs.aws.amazon.com//iot/latest/developerguide/iot-custom-endpoints-configurable.html) from the AWS IoT Core Developer Guide.
│           └ properties
│              └ EnableOCSPCheck: (documentation changed)
├[~] service aws-iotevents
│ └ resources
│    ├[~] resource AWS::IoTEvents::AlarmModel
│    │ └ types
│    │    └[~] type Firehose
│    │      └ properties
│    │         └ Payload: (documentation changed)
│    └[~] resource AWS::IoTEvents::DetectorModel
│      └ types
│         └[~] type Firehose
│           └ properties
│              └ Payload: (documentation changed)
├[~] service aws-iotfleetwise
│ └ resources
│    └[~] resource AWS::IoTFleetWise::SignalCatalog
│      └ attributes
│         ├ NodeCounts.TotalActuators: (documentation changed)
│         ├ NodeCounts.TotalAttributes: (documentation changed)
│         ├ NodeCounts.TotalBranches: (documentation changed)
│         ├ NodeCounts.TotalNodes: (documentation changed)
│         └ NodeCounts.TotalSensors: (documentation changed)
├[~] service aws-iottwinmaker
│ └ resources
│    ├[~] resource AWS::IoTTwinMaker::ComponentType
│    │ └ attributes
│    │    └ Status: (documentation changed)
│    ├[~] resource AWS::IoTTwinMaker::Entity
│    │ └ attributes
│    │    └ Status: (documentation changed)
│    └[~] resource AWS::IoTTwinMaker::Scene
│      └ attributes
│         └ GeneratedSceneMetadata: (documentation changed)
├[~] service aws-iotwireless
│ └ resources
│    ├[~] resource AWS::IoTWireless::FuotaTask
│    │ └ attributes
│    │    └ LoRaWAN.StartTime: (documentation changed)
│    ├[~] resource AWS::IoTWireless::MulticastGroup
│    │ └ attributes
│    │    ├ LoRaWAN.NumberOfDevicesInGroup: (documentation changed)
│    │    └ LoRaWAN.NumberOfDevicesRequested: (documentation changed)
│    └[~] resource AWS::IoTWireless::ServiceProfile
│      └ attributes
│         ├ LoRaWAN.ChannelMask: (documentation changed)
│         ├ LoRaWAN.DevStatusReqFreq: (documentation changed)
│         ├ LoRaWAN.DlBucketSize: (documentation changed)
│         ├ LoRaWAN.DlRate: (documentation changed)
│         ├ LoRaWAN.DlRatePolicy: (documentation changed)
│         ├ LoRaWAN.DrMax: (documentation changed)
│         ├ LoRaWAN.DrMin: (documentation changed)
│         ├ LoRaWAN.HrAllowed: (documentation changed)
│         ├ LoRaWAN.MinGwDiversity: (documentation changed)
│         ├ LoRaWAN.NwkGeoLoc: (documentation changed)
│         ├ LoRaWAN.ReportDevStatusBattery: (documentation changed)
│         ├ LoRaWAN.ReportDevStatusMargin: (documentation changed)
│         ├ LoRaWAN.TargetPer: (documentation changed)
│         ├ LoRaWAN.UlBucketSize: (documentation changed)
│         ├ LoRaWAN.UlRate: (documentation changed)
│         └ LoRaWAN.UlRatePolicy: (documentation changed)
├[~] service aws-kinesisfirehose
│ └ resources
│    └[~] resource AWS::KinesisFirehose::DeliveryStream
│      ├ properties
│      │  └ SnowflakeDestinationConfiguration: (documentation changed)
│      └ types
│         ├[~] type AmazonOpenSearchServerlessDestinationConfiguration
│         │ └ properties
│         │    ├ RetryOptions: (documentation changed)
│         │    ├ RoleARN: (documentation changed)
│         │    └ S3BackupMode: (documentation changed)
│         ├[~] type AmazonOpenSearchServerlessRetryOptions
│         │ ├  - documentation: Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to the Serverless offering for Amazon OpenSearch Service.
│         │ │  + documentation: Configures retry behavior in case Firehose is unable to deliver documents to the Serverless offering for Amazon OpenSearch Service.
│         │ └ properties
│         │    └ DurationInSeconds: (documentation changed)
│         ├[~] type AmazonopensearchserviceDestinationConfiguration
│         │ └ properties
│         │    └ DocumentIdOptions: (documentation changed)
│         ├[~] type DataFormatConversionConfiguration
│         │ └ properties
│         │    ├ InputFormatConfiguration: (documentation changed)
│         │    └ OutputFormatConfiguration: (documentation changed)
│         ├[~] type DeliveryStreamEncryptionConfigurationInput
│         │ └ properties
│         │    └ KeyARN: (documentation changed)
│         ├[~] type Deserializer
│         │ └ properties
│         │    ├ HiveJsonSerDe: (documentation changed)
│         │    └ OpenXJsonSerDe: (documentation changed)
│         ├[~] type DocumentIdOptions
│         │ ├  - documentation: Indicates the method for setting up document ID. The supported methods are Kinesis Data Firehose generated document ID and OpenSearch Service generated document ID.
│         │ │  + documentation: Indicates the method for setting up document ID. The supported methods are Firehose generated document ID and OpenSearch Service generated document ID.
│         │ └ properties
│         │    └ DefaultDocumentIdFormat: (documentation changed)
│         ├[~] type ElasticsearchDestinationConfiguration
│         │ └ properties
│         │    └ DocumentIdOptions: (documentation changed)
│         ├[~] type HiveJsonSerDe
│         │ ├  - documentation: The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
│         │ │  + documentation: The native Hive / HCatalog JsonSerDe. Used by Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
│         │ └ properties
│         │    └ TimestampFormats: (documentation changed)
│         ├[~] type OpenXJsonSerDe
│         │ ├  - documentation: The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
│         │ │  + documentation: The OpenX SerDe. Used by Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
│         │ └ properties
│         │    ├ CaseInsensitive: (documentation changed)
│         │    └ ConvertDotsInJsonKeysToUnderscores: (documentation changed)
│         ├[~] type OrcSerDe
│         │ └ properties
│         │    ├ BlockSizeBytes: (documentation changed)
│         │    └ BloomFilterColumns: (documentation changed)
│         ├[~] type OutputFormatConfiguration
│         │ └  - documentation: Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data before it writes it to Amazon S3. This parameter is required if `Enabled` is set to true.
│         │    + documentation: Specifies the serializer that you want Firehose to use to convert the format of your data before it writes it to Amazon S3. This parameter is required if `Enabled` is set to true.
│         ├[~] type ParquetSerDe
│         │ └ properties
│         │    └ BlockSizeBytes: (documentation changed)
│         ├[~] type RedshiftDestinationConfiguration
│         │ └ properties
│         │    └ RetryOptions: (documentation changed)
│         ├[~] type RedshiftRetryOptions
│         │ ├  - documentation: Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift.
│         │ │  + documentation: Configures retry behavior in case Firehose is unable to deliver documents to Amazon Redshift.
│         │ └ properties
│         │    └ DurationInSeconds: (documentation changed)
│         ├[~] type SchemaConfiguration
│         │ ├  - documentation: Specifies the schema to which you want Kinesis Data Firehose to configure your data before it writes it to Amazon S3. This parameter is required if `Enabled` is set to true.
│         │ │  + documentation: Specifies the schema to which you want Firehose to configure your data before it writes it to Amazon S3. This parameter is required if `Enabled` is set to true.
│         │ └ properties
│         │    ├ RoleARN: (documentation changed)
│         │    └ VersionId: (documentation changed)
│         ├[~] type Serializer
│         │ └  - documentation: The serializer that you want Kinesis Data Firehose to use to convert data to the target format before writing it to Amazon S3. Kinesis Data Firehose supports two types of serializers: the [ORC SerDe](https://docs.aws.amazon.com/https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/orc/OrcSerde.html) and the [Parquet SerDe](https://docs.aws.amazon.com/https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/parquet/serde/ParquetHiveSerDe.html) .
│         │    + documentation: The serializer that you want Firehose to use to convert data to the target format before writing it to Amazon S3. Firehose supports two types of serializers: the [ORC SerDe](https://docs.aws.amazon.com/https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/orc/OrcSerde.html) and the [Parquet SerDe](https://docs.aws.amazon.com/https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/parquet/serde/ParquetHiveSerDe.html) .
│         ├[~] type SnowflakeDestinationConfiguration
│         │ ├  - documentation: undefined
│         │ │  + documentation: Configure Snowflake destination
│         │ └ properties
│         │    ├ AccountUrl: (documentation changed)
│         │    ├ ContentColumnName: (documentation changed)
│         │    ├ Database: (documentation changed)
│         │    ├ DataLoadingOption: (documentation changed)
│         │    ├ KeyPassphrase: (documentation changed)
│         │    ├ MetaDataColumnName: (documentation changed)
│         │    ├ PrivateKey: (documentation changed)
│         │    ├ RetryOptions: (documentation changed)
│         │    ├ RoleARN: (documentation changed)
│         │    ├ S3BackupMode: (documentation changed)
│         │    ├ Schema: (documentation changed)
│         │    ├ SnowflakeRoleConfiguration: (documentation changed)
│         │    ├ SnowflakeVpcConfiguration: (documentation changed)
│         │    ├ Table: (documentation changed)
│         │    └ User: (documentation changed)
│         ├[~] type SnowflakeRetryOptions
│         │ ├  - documentation: undefined
│         │ │  + documentation: Specify how long Firehose retries sending data to the New Relic HTTP endpoint. After sending data, Firehose first waits for an acknowledgment from the HTTP endpoint. If an error occurs or the acknowledgment doesn’t arrive within the acknowledgment timeout period, Firehose starts the retry duration counter. It keeps retrying until the retry duration expires. After that, Firehose considers it a data delivery failure and backs up the data to your Amazon S3 bucket. Every time that Firehose sends data to the HTTP endpoint (either the initial attempt or a retry), it restarts the acknowledgement timeout counter and waits for an acknowledgement from the HTTP endpoint. Even if the retry duration expires, Firehose still waits for the acknowledgment until it receives it or the acknowledgement timeout period is reached. If the acknowledgment times out, Firehose determines whether there's time left in the retry counter. If there is time left, it retries again and repeats the logic until it receives an acknowledgment or determines that the retry time has expired. If you don't want Firehose to retry sending data, set this value to 0.
│         │ └ properties
│         │    └ DurationInSeconds: (documentation changed)
│         ├[~] type SnowflakeRoleConfiguration
│         │ ├  - documentation: undefined
│         │ │  + documentation: Optionally configure a Snowflake role. Otherwise the default user role will be used.
│         │ └ properties
│         │    ├ Enabled: (documentation changed)
│         │    └ SnowflakeRole: (documentation changed)
│         ├[~] type SnowflakeVpcConfiguration
│         │ ├  - documentation: undefined
│         │ │  + documentation: Configure a Snowflake VPC
│         │ └ properties
│         │    └ PrivateLinkVpceId: (documentation changed)
│         ├[~] type SplunkDestinationConfiguration
│         │ └ properties
│         │    ├ HECAcknowledgmentTimeoutInSeconds: (documentation changed)
│         │    ├ HECEndpoint: (documentation changed)
│         │    ├ RetryOptions: (documentation changed)
│         │    └ S3BackupMode: (documentation changed)
│         └[~] type SplunkRetryOptions
│           └ properties
│              └ DurationInSeconds: (documentation changed)
├[~] service aws-lambda
│ └ resources
│    └[~] resource AWS::Lambda::Permission
│      └ attributes
│         └ Id: (documentation changed)
├[~] service aws-lightsail
│ └ resources
│    ├[~] resource AWS::Lightsail::Container
│    │ ├ properties
│    │ │  └ PrivateRegistryAccess: (documentation changed)
│    │ ├ attributes
│    │ │  └ PrivateRegistryAccess.EcrImagePullerRole.PrincipalArn: (documentation changed)
│    │ └ types
│    │    └[~] type PrivateRegistryAccess
│    │      └  - documentation: Describes the configuration for an Amazon Lightsail container service to access private container image repositories, such as Amazon Elastic Container Registry ( Amazon ECR ) private repositories.
│    │         For more information, see [Configuring access to an Amazon ECR private repository for an Amazon Lightsail container service](https://docs.aws.amazon.com/latest/userguide/amazon-lightsail-container-service-ecr-private-repo-access) in the *Amazon Lightsail Developer Guide* .
│    │         + documentation: Describes the configuration for an Amazon Lightsail container service to access private container image repositories, such as Amazon Elastic Container Registry ( Amazon ECR ) private repositories.
│    │         For more information, see [Configuring access to an Amazon ECR private repository for an Amazon Lightsail container service](https://docs.aws.amazon.com/lightsail/latest/userguide/amazon-lightsail-container-service-ecr-private-repo-access) in the *Amazon Lightsail Developer Guide* .
│    ├[~] resource AWS::Lightsail::Disk
│    │ └ attributes
│    │    ├ Location.AvailabilityZone: (documentation changed)
│    │    └ Location.RegionName: (documentation changed)
│    └[~] resource AWS::Lightsail::Instance
│      └ attributes
│         ├ Hardware.CpuCount: (documentation changed)
│         ├ Hardware.RamSizeInGb: (documentation changed)
│         ├ Location.AvailabilityZone: (documentation changed)
│         ├ Location.RegionName: (documentation changed)
│         ├ Networking.MonthlyTransfer.GbPerMonthAllocated: (documentation changed)
│         ├ State.Code: (documentation changed)
│         └ State.Name: (documentation changed)
├[~] service aws-logs
│ └ resources
│    ├[~] resource AWS::Logs::AccountPolicy
│    │ ├  - documentation: Creates or updates an account-level data protection policy or subscription filter policy that applies to all log groups or a subset of log groups in the account.
│    │ │  *Data protection policy*
│    │ │  A data protection policy can help safeguard sensitive data that's ingested by your log groups by auditing and masking the sensitive log data. Each account can have only one account-level data protection policy.
│    │ │  > Sensitive data is detected and masked when it is ingested into a log group. When you set a data protection policy, log events ingested into the log groups before that time are not masked. 
│    │ │  If you create a data protection policy for your whole account, it applies to both existing log groups and all log groups that are created later in this account. The account policy is applied to existing log groups with eventual consistency. It migh

[aws-cdk-automation]

AWS CodeBuild CI Report

• CodeBuild project: AutoBuildv2Project1C6BFA3F-wQm2hXv2jqQv
• Commit ID: 073afe3
• Result: SUCCEEDED
• Build Logs (available for 30 days)

Powered by github-codebuild-logs, available on the AWS Serverless Application Repository