Update CodSpeedHQ/action action to v4.8.2

[renovate]

This PR contains the following updates:

Package	Type	Update	Change	Pending
CodSpeedHQ/action	action	minor	v4.7.0 → v4.8.2	v4.10.2 (+2)

---

Release Notes

CodSpeedHQ/action (CodSpeedHQ/action)

v4.8.2

Compare Source

Release Notes

🐛 Bug Fixes

• Check whether artifact contains any elements by @​not-matthias in #​204

⚙️ Internals

• chore: bump runner version to 4.8.2 by @​github-actions[bot] in #​174

Install codspeed-runner 4.8.2

Install prebuilt binaries via shell script

curl --proto '=https' --tlsv1.2 -LsSf https://github.com/CodSpeedHQ/runner/releases/download/v4.8.2/codspeed-runner-installer.sh | sh

Download codspeed-runner 4.8.2

File	Platform	Checksum
codspeed-runner-aarch64-unknown-linux-musl.tar.gz	ARM64 MUSL Linux	checksum
codspeed-runner-x86_64-unknown-linux-musl.tar.gz	x64 MUSL Linux	checksum

Full Runner Changelog: https://github.com/CodSpeedHQ/runner/blob/main/CHANGELOG.md

Full Changelog: CodSpeedHQ/action@v4.8.1...v4.8.2

v4.8.1

Compare Source

Release Notes

🚀 Features

• Check if memtrack produced artifacts by @​not-matthias in #​195
• Require minimum protocol version for memtrack by @​not-matthias

🐛 Bug Fixes

• Add explicit min version check for memory executor by @​not-matthias in #​203

⚙️ Internals

• chore: bump runner version to 4.8.1 by @​github-actions[bot] in #​173

Install codspeed-runner 4.8.1

Install prebuilt binaries via shell script

curl --proto '=https' --tlsv1.2 -LsSf https://github.com/CodSpeedHQ/runner/releases/download/v4.8.1/codspeed-runner-installer.sh | sh

Download codspeed-runner 4.8.1

File	Platform	Checksum
codspeed-runner-aarch64-unknown-linux-musl.tar.gz	ARM64 MUSL Linux	checksum
codspeed-runner-x86_64-unknown-linux-musl.tar.gz	x64 MUSL Linux	checksum

Full Runner Changelog: https://github.com/CodSpeedHQ/runner/blob/main/CHANGELOG.md

Full Changelog: CodSpeedHQ/action@v4.8.0...v4.8.1

v4.8.0

Compare Source

Release Notes

It is now possible to do consecutive CodSpeed run in the same GitHub job. This will allow using multiple instruments without having to spawn another job 🎉

jobs:
  codspeed:
    ...
    steps:
      ...
      - name: Build benchmarks
        run: cargo codspeed build -m analysis

      - name: Run benchmarks
        uses: CodSpeedHQ/action@v4
        with:
          run: cargo codspeed run
          mode: "simulation"

      - name: Run memory benchmarks
        uses: CodSpeedHQ/action@v4
        with:
          run: cargo codspeed run
          mode: "memory"

🚀 Features

• Allow defining targets in codspeed yaml by @​GuillaumeLagrange in #​197
• Add an stdin mode to provide multiple commands by @​GuillaumeLagrange
• Add a run index suffix by @​fargito in #​199
• Make the config less strict about its config by @​GuillaumeLagrange in #​198
• Add support for analysis mode with memory instrument by @​GuillaumeLagrange
• Reduce shared fifo timeout to end executor runs faster after the program has ended by @​GuillaumeLagrange in #​193
• Use a bufwriter to save unwind data by @​GuillaumeLagrange
• Support dynamically and statically linked allocators by @​not-matthias
• Track memalign calls by @​not-matthias
• Accept IPC before creating tracker to avoid timeouts by @​not-matthias
• Add integration tests for complex cli commands by @​GuillaumeLagrange
• Add the full command to the uri and handle hyphens better by @​GuillaumeLagrange
• Add yaml project config discovery and loading by @​GuillaumeLagrange in #​189
• Implement the walltime benchmarking algorithm by @​GuillaumeLagrange
• Use rayon to collect perf walltime data by @​GuillaumeLagrange
• Handle memory executor when displaying results by @​GuillaumeLagrange in #​190
• Do not draw a table if there is only one benchmark by @​GuillaumeLagrange
• Stop using the deprecated time field and use value instead by @​GuillaumeLagrange

🐛 Bug Fixes

• Fix behavior when multiple benchmarks are ran by @​GuillaumeLagrange
• Simplify run_part_id computation by @​fargito in #​200
• Write perf map all at once instead of line by line by @​GuillaumeLagrange
• Drop privileges when running commands under sudo by @​not-matthias
• Make walltime results stat computation the same as pytest-codspeed by @​GuillaumeLagrange in #​185

🏗️ Refactor

• Move project config structs to interfaces mod by @​GuillaumeLagrange
• Move all walltime benchmarking to its dedicated module by @​GuillaumeLagrange

⚙️ Internals

• chore: bump runner version to 4.8.0 by @​github-actions[bot] in #​172
• Bump memtrack version
• Ignore .codspeed for exec-harness output by @​GuillaumeLagrange
• Remove useless clone derive for project config by @​GuillaumeLagrange
• Cleanup output by @​not-matthias in #​196
• Use simulation in codspeed action by @​GuillaumeLagrange in #​194
• Cache benchmark executable by @​GuillaumeLagrange
• Add prelude and remove linter dead_code suppression by @​GuillaumeLagrange
• Reduce logs verbosity of debug info and perf file serialization by @​GuillaumeLagrange
• Remove unused execve event by @​not-matthias in #​192
• Add prelude by @​not-matthias
• Print number of events written to disk by @​not-matthias
• Switch to rust-cache to cache builds of the installed workspace binaries by @​GuillaumeLagrange in #​191
• Install exec-harness before runner tests tests by @​GuillaumeLagrange
• Remove double metadata information by @​GuillaumeLagrange
• Add link to relevant issue for codspeed-rust metadata by @​GuillaumeLagrange
• Use fork supporting compressed events for linux-perf-data by @​GuillaumeLagrange
• Run exec-harness tests in separate CI job to prevent fifo issues by @​GuillaumeLagrange
• Downgrade flate because 1.1.7 was yanked by @​GuillaumeLagrange

Install codspeed-runner 4.8.0

Install prebuilt binaries via shell script

curl --proto '=https' --tlsv1.2 -LsSf https://github.com/CodSpeedHQ/runner/releases/download/v4.8.0/codspeed-runner-installer.sh | sh

Download codspeed-runner 4.8.0

File	Platform	Checksum
codspeed-runner-aarch64-unknown-linux-musl.tar.gz	ARM64 MUSL Linux	checksum
codspeed-runner-x86_64-unknown-linux-musl.tar.gz	x64 MUSL Linux	checksum

Full Runner Changelog: https://github.com/CodSpeedHQ/runner/blob/main/CHANGELOG.md

Full Changelog: CodSpeedHQ/action@v4.7.0...v4.8.0

---

Configuration

📅 Schedule: Branch creation - "before 4am on Monday" (UTC), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[astral-sh-bot]

ruff-ecosystem results

Linter (stable)

✅ ecosystem check detected no linter changes.

Linter (preview)

✅ ecosystem check detected no linter changes.

Formatter (stable)

✅ ecosystem check detected no format changes.

Formatter (preview)

✅ ecosystem check detected no format changes.