Repository navigation
feat: adopt upstream Firstmate updates and surface blocked secondmates - #85
Merged
Merged
Conversation
…tension log opt-in (kunchenguid#5489) * Fix Pi watcher successor-gap confirmations and add extension log Accept an already-acknowledged handling confirmation as a no-op when the generation matches, confirm the restoration's own recovery token with a superseded (not rejected) outcome on generation mismatch, retire an arm on confirm failure only when the failed token names that exact pid, and record restore attempts, readiness timeouts, and confirm results in the bounded state/.watch-extension.log. Regression tests: already-acked no-op plus mismatch/dead-pid/lock-mismatch rejections and the manual-restart churn contract in fm-watch-arm.test.sh, and a mid-restore marker advance with no rejection appendix in fm-pi-watch-extension.test.sh. * Treat a dead arm child as an empty slot so repair and retry recover startArm and scheduleRetry answered unchanged while holding a ChildProcess whose OS process was already gone but whose close had not fired, so neither the repair tool nor the retry timer started anything until that close fired. Gate slot occupancy on a liveness check (exit/signal codes plus pid probe) and start a fresh arm instead, with a regression test driving the repair tool against a dead-but-unclosed child. * no-mistakes(document): Document new Pi extension log knob * no-mistakes(review): Fix confirm-failure retire token match, add distinct-pid test * no-mistakes(document): Clarify retire guard needs pid and generation * Make the Pi extension diagnostic log opt-in and default-off Only a positive FM_WATCH_EXTENSION_LOG_KEEP_LINES enables state/.watch-extension.log. Unset, empty, non-numeric, zero, and negative values disable logging entirely, so the default run writes nothing and never creates the file. The shared positiveInteger fallback semantics stay untouched for the retry and timeout knobs. docs/configuration.md owns the knob contract and docs/watcher-continuity.md points at it. Tests: the superseded-delivery case runs opted in, and a new case proves unset, zero, and non-numeric values create no log file while delivery still succeeds. * no-mistakes(document): Qualify extension-log coverage bullet as opt-in * no-mistakes(ci): The two reported checks (CI run 36372002913, Require no-mistakes run 36372069208) show conclusion action_required with 0 jobs and no logs because this is a fork PR (RibatTRW/firstmate) and GitHub is holding the workflow runs awaiting maintainer approval; that gate is external to the code and needs a maintainer to approve the runs. While verifying the change locally I found a real defect the approved CI run would hit: the PR's new test test_handling_delivered_rejects_a_superseded_generation failed deterministically. Invariant violated: reopen-announced (a non-successor/manual arm start) mints a fresh recovery generation only when the durable wake queue holds unrecovered work; an announced episode with an empty queue must be left untouched so idle arm starts never churn generations (the [ -s queue ] guard from kunchenguid#4819, relied on by bin/fm-watch.sh:2413 and covered by the append-reopens and announcement-bound sibling tests). The test called reopen with an empty queue and expected churn, so the fix establishes the queued-work precondition (append one wake, re-announce, re-read the generation) before asserting the reopen mints and the old confirmation mismatches. Test-only change, 14 lines in tests/fm-watch-arm.test.sh. Verified: fm-watch-arm.test.sh 25/25 ok on two consecutive runs, fm-pi-watch-extension.test.sh 55/55 ok, and shellcheck reports only one pre-existing warning outside the edited region * no-mistakes(document): Restore blank line in watcher-continuity docs * Route superseded Pi deliveries like confirmed ones and cover the retire guard A superseded handling confirmation now falls through to the normal delivery path, so an accepting supervision branch owns the wake instead of main. Scope the watcher-continuity token-pinned confirmation and narrowed retire rule to Pi, since omp and OpenCode still confirm against the current successor. Add tests that fail when the retire guard, the scheduled-retry gate, or the deferred-close gate is reverted, relabel the churned-generation characterization test, and use a reaped pid for the dead-pid rejection.
…es (kunchenguid#5863) * fix(pi): silence unacknowledged processing retry replies Suppress autonomous processing prose before persistence and during streaming while retaining tool calls, signed reasoning, and retryable outcomes. Restore ordinary output after acknowledgement or a user message. Fixes kunchenguid#4954 * no-mistakes(review): Silence only processing retries, keep first presentation visible * fix(pi): preserve differing processing retry replies
…henguid#6530) Pi 1.0.1's createToolHtmlRenderer reads getToolRenderers and ignores getToolDefinition. Calm /export still includes stock grep HTML; the fixture has to pass the lookup key the installed Pi actually reads.
* fix(procevent-quota): tolerate consecutive slow quota-axi reads The quota allowance poll treated any quota_json failure as terminal, so one slow quota-axi --json (measured max ~29s under a 48s derived bound) shut the watch down until someone re-armed it, and the detail always said "missing/incompatible". Tolerate three consecutive failed or timed-out reads before going terminal, reset the streak on any good read, and report a timeout distinctly from a missing or incompatible tool. Each timed poll runs exactly one bounded --version and one bounded --json: validate the captured version text through fm_quota_axi_version_compatible rather than launching a second probe, and describe a mixed failure streak by count plus last cause. * no-mistakes(document): Document quota polling failure tolerance * no-mistakes(ci): Fixed ci-2 and ci-3. Permanent quota read failures (rc 2 missing, rc 3 incompatible) now report on the first poll, while transient rc 1/4 failures retain the existing three-failure retry behavior. The missing-binary test now uses an isolated PATH without quota-axi and asserts both permanent failures stop at condition_polls: 1. Verification passed: tests/fm-procevent-quota.test.sh, canonical fast lint for both changed files, bash syntax checks, and git diff --check * no-mistakes(review): Classify untimed quota version failures as transient * no-mistakes(document): Clarify quota polling failure budget
…enguid#6505) * fix(teardown): clarify scratch guidance and dirty worktree refusals Keep ship proof material outside the task worktree and distinguish untracked-only leftovers from tracked edits without changing cleanup guards. Fixes kunchenguid#6319 * fix(ci): Fixed ci-3 only. Both promotion outputs now replace the scout restriction and require external scratch storage and a clean worktree before done. Verification: 27 delivery tests passed, five mutations caught, restored test passed, pinned ShellCheck and syntax/whitespace checks passed. ci-1, ci-2, and ci-4 remain untouched
…nguid#6518) * Escalate inbox instructions stuck behind a busy worker Count consecutive busy-deferred due doorbells durably and escalate at the configured bound without typing into the worker pane. Fixes kunchenguid#6445 * fix(review): Fix inbox escalation deduplication and busy streak resets * fix(review): Preserve busy inbox escalations through daemon supervision * fix(document): Correct busy-inbox escalation documentation * fix(ci): Fixed SC2034 in tests/fm-task-inbox.test.sh by including the loop counter in the failure diagnostic. Source-aware lint, all 34 inbox tests, and git diff --check pass. Behavior portable serial 6 reproduces identically on base 1f3e769 and target 78156b8 with Pi 1.0.1: an unrelated renderer API change breaks the unchanged Calm test. No Calm changes made; that failure is addressed separately by kunchenguid#6516. Logs retained in scratchpad-ci/ * fix(ci): Fixed ci-2, ci-3, and ci-4: successor failures surface, reset alerts deduplicate, and oversized busy limits fall back to two. Passed 47 inbox tests, 7 focused daemon checks, all 13 mutation checks, lint, documentation checks, and diff checks. Evidence: scratchpad-ci-selected/summary.json. ci-1 remains unchanged and unwaived. Fresh live Herdr proof remains with the outer driver
* fix: prevent healthy remote job worker turnover * no-mistakes(review): Serialize full LaunchAgent repair and verify launchd-tracked owners * no-mistakes(review): Let launchd-tracked unpublished spawns start before reloading * no-mistakes(document): Document remote worker heartbeat and serialized LaunchAgent recovery * no-mistakes(ci): Full CI log showed the idle-worker regression exceeded its outdated command budget (82 versus 80) after independent heartbeat ownership checks were added. Raised the budget to 120 while retaining the separate busy-poll sleep limit. Remote-job and LaunchAgent executable tests passed, as did bash syntax validation and git diff --check. No production behavior changed * no-mistakes(ci): Fixed missing readiness recovery under verified live ownership, preserving the serving PID and private file mode. Added executable regressions for deletion during a blocked sweep and stale readiness diagnostics without LaunchAgent reload. Deletion regression failed before the fix. Both remote-job test suites, bash syntax validation, and git diff --check passed * no-mistakes(ci): Full CI log identified a flaky ownership-loss test racing an already-authorized heartbeat refresh. Replaced backdating and a fixed sleep with bounded observation of readiness expiry through the public probe. Production behavior unchanged. Remote-job and LaunchAgent executable suites passed; bash syntax validation and git diff --check passed * fix: wait for launchd bootout cleanup * no-mistakes(document): Document remote worker recovery and read-only turnover verification * no-mistakes(review): Publish worker identity before lock owner records * no-mistakes(document): Document worker identity publication safety invariant * no-mistakes(ci): Fixed ci-1: replacement workers discard predecessor readiness before publishing identity and roll back identity if lock-owner recording fails. Added executable regressions reproducing both defects. LaunchAgent and orphan-reap suites, shell syntax checks, and git diff --check passed. No live service state was modified * no-mistakes(ci): Restored lock-owner-before-identity publication and removed the identity rollback and reordering-only tests. Retained an executable regression proving predecessor readiness is rejected until replacement startup completes. LaunchAgent and orphan-reap suites, shell syntax checks, and git diff --check passed. Other changes remain intact; the retained-identity interrupted-repair edge remains out of scope. No live service state was modified
* fix(remote-job): reap expired seq claims with one directory walk The hourly claim sweep forked uname+stat per .seq-claims entry and blocked serving for ~85s at ~17k dirs. Delete expired empty claim dirs with a single find -exec rmdir batch and cache the host uname for remaining mtime reads. * no-mistakes(review): Restore original path mtime helper and drop uname cache * no-mistakes(test): Restore claim retention eligibility; focused retention and serving tests pass * no-mistakes(document): Document single-walk claim cleanup and regression entrypoints * no-mistakes(ci): Fixed Lint 2’s reproduced SC1091 by adding the tests/lib.sh ShellCheck source directive to the retention test. Runtime behavior is unchanged. ShellCheck passed for both new claim tests; Bash syntax, the retention behavior test, and git diff --check passed * fix(tests): keep fixture registries out of git worktree roots A TMPDIR pointed at a repository root placed live .fm-test-* registries beside tracked files, and a concurrent git add during the claim-walk CI fix round committed three of them. Route registries and fixture roots through a TMPDIR that refuses git worktree roots, remove the stray files, and pin the escape with a behavioral cleanup test. * no-mistakes(review): Preserve whole-second claim expiry in single-walk sweep * no-mistakes(document): Correct temporary-directory resolution documentation * no-mistakes(ci): Fixed ci-3 by changing only the stale, fresh, and read-only orphan fixture paths in tests/fm-test-fixture-cleanup.test.sh to use $FM_TEST_TMPDIR. All seven tests passed both normally and with TMPDIR set to the worktree root. Shell syntax and git diff --check passed
…t-in (kunchenguid#5354) * feat(bin): record each task's no-mistakes pipeline spend at cleanup no-mistakes keeps every pipeline agent invocation's token usage only in its local agent_invocations records, and cold pipeline agents (review, test, document) leave no session log, so a task's review-loop cost never reached Firstmate's records and could not be attributed after cleanup. bin/fm-pipeline-spend.sh attributes a task's runs by the repository no-mistakes resolves for the task copy, the task branch, and the branch's creation (a relaunch mints a new spawn_gen while the branch keeps validating), then sums every invocation, failed and cancelled included. Token fields use no-mistakes' per-round deltas so resumed review rounds are not counted twice, and unrecorded values stay unknown rather than zero. show prints the record read-only; record appends it once per task incarnation to data/pipeline-spend.jsonl. Teardown records it for every ship task it cleans up, before deleting the branch and the task record. fm_nm_state_db becomes the one owner of where no-mistakes' state database lives, shared with the capped run-inventory reader. * no-mistakes(review): Drop spend show command and timeout override * style(bin): rewrap fm-pipeline-spend header comment * Make pipeline spend recording opt-in * feat(bin): record each task's no-mistakes pipeline spend at cleanup no-mistakes keeps every pipeline agent invocation's token usage only in its local agent_invocations records, and cold pipeline agents (review, test, document) leave no session log, so a task's review-loop cost never reached Firstmate's records and could not be attributed after cleanup. bin/fm-pipeline-spend.sh attributes a task's runs by the repository no-mistakes resolves for the task copy, the task branch, and the branch's creation (a relaunch mints a new spawn_gen while the branch keeps validating), then sums every invocation, failed and cancelled included. Token fields use no-mistakes' per-round deltas so resumed review rounds are not counted twice, and unrecorded values stay unknown rather than zero. show prints the record read-only; record appends it once per task incarnation to data/pipeline-spend.jsonl. Teardown records it for every ship task it cleans up, before deleting the branch and the task record. fm_nm_state_db becomes the one owner of where no-mistakes' state database lives, shared with the capped run-inventory reader. * no-mistakes(review): Drop spend show command and timeout override * style(bin): rewrap fm-pipeline-spend header comment * Make pipeline spend recording opt-in * no-mistakes(document): Note pipeline-spend opt-in gate in teardown comments * no-mistakes(ci): I fixed all three Greptile findings following your decision. Both test suites pass: tests/fm-teardown.test.sh (105 ok, exit 0) and tests/fm-pipeline-spend.test.sh (8 ok). I didn't run either new test against the old code, so the claim that they fail before the fix is from reading the code, not a run. Nothing was committed or pushed. **ci-1 / ci-2 (bin/fm-teardown.sh):** The rule is that every owned ship task in a home that has opted in gets a durable spend record before its task record is deleted. The `[ -d "$WT" ]` check skipped the recorder when the worktree folder was already gone, so no record was written. I removed that check and kept the other conditions: the task must be a ship task, teardown must own its worktree, and `config/pipeline-spend` must exist. `bin/fm-pipeline-spend.sh` already writes an unavailable-source line when the worktree is missing. The new test `test_teardown_records_unavailable_spend_for_a_gone_worktree` in tests/fm-teardown.test.sh sets up an owned ship task whose worktree is missing, with recording turned on. It checks that teardown succeeds, writes a line with `source=="unavailable"`, `total==null` and a reason saying the task copy is gone, and still removes the task record. Under the old check no ledger would have been written. **ci-3 (bin/fm-nm-run-lib.sh):** When `NM_HOME` and `HOME` were both unset, `fm_nm_state_db` fell back to `${HOME:-}/.no-mistakes`, which resolves to `/.no-mistakes`. It now uses `root=~/.no-mistakes`. Bash expands `~` to the account's home directory even when `HOME` is unset, which matches the previous Python `Path.home()` lookup. The new test `test_state_db_without_nm_home_or_home_uses_the_account_home` in tests/fm-pipeline-spend.test.sh runs the function with both variables unset and compares the result to the home directory from the system's password database. The old code would have returned `/.no-mistakes/state.sqlite`. shellcheck reports nothing new on the changed files. I added one `disable=SC2016` comment in the new test, where the single-quoted `$1` is meant to expand in the child shell
* feat(bin): start tasks from a named base branch Spawns always reset a task's pooled copy to origin's default branch, so work that belongs on a feature, integration, or release branch started from the wrong code and opened its PR against the default. fm-brief.sh --base-branch records the base in the brief, fm-spawn.sh resets the copy to origin/<base> and records base_branch= in task meta, and the worker targets its PR at that branch. Review diffs, the cleanup content check, and scout promotion read the recorded base. local-only and Gerrit deliveries refuse a named base. * no-mistakes(review): Anchor brief base-branch parse on scaffold Setup line * no-mistakes(review): Require explicit --base-branch on spawn, matching brief lines * no-mistakes(document): Note base-branch reset in fm-spawn freshness header * no-mistakes(ci): I fixed all four Greptile findings the way you specified. The affected suites pass locally: fm-brief, fm-dod-lib, fm-spawn-pool-base-freshen, fm-review-diff, fm-teardown and fm-task-delivery. shellcheck on the changed files reports only info-level notes, no warnings or errors. I didn't revert the code to watch each new test fail before the fix. - **ci-1 (brief text blocked or redirected spawns):** In bin/fm-dod-lib.sh, `fm_brief_base_branches` now only accepts a `Base branch: <value>` line that comes directly after the base-variant Setup sentence fm-brief.sh writes. Any other `Base branch:` line is ignored. `--base-branch` is still the only authority, and the existing checks in fm-spawn.sh are unchanged. With the flag, the spawn is refused unless a matching pair exists and no pair names a different branch. Without the flag, it is refused only if such a pair exists. The header comment in fm-spawn.sh is updated to match. - The `brief_with_base` test helper now writes the real two-line pair. - The decoy refusal case now uses a full decoy pair in the captain's intent. - New test `test_prose_base_branch_line_is_ignored`: a brief with no base whose intent quotes `Base branch: release/1.2` spawns normally with no `base_branch=` recorded. A spawn with `--base-branch feature/hub` whose intent names release/1.2 starts from `origin/feature/hub` and records it. - **ci-2 (scout base not checked against the forge):** fm-spawn.sh now looks up the project's registered forge with `bin/fm-project-mode.sh --forge`, like the ship path does, before `fm_base_branch_valid` runs. Previously it passed `none`. New test `test_scout_base_branch_refused_on_gerrit_forge`: a scout with a base on a forge=gerrit project is refused at spawn and no meta file is written. - **ci-3 (base not shell-quoted in worker commands):** `fm_dod_block` now quotes the base with `printf %q` in the `--base` and `--base-branch` arguments, and the branch name in the prose stays readable. The test in fm-brief.test.sh uses the base `release/$HOTFIX` and checks that both direct-PR and no-mistakes briefs render `release/\$HOTFIX` in the commands. - **ci-4 (ambiguous PR sentence):** The direct-PR sentence now reads "open a PR with `gh-axi` that is ready for review, not a draft, against the base branch `X` (`--base X`), not the repository default." A brief with no base renders exactly as before. The existing assertion in fm-brief.test.sh is updated * no-mistakes(ci): Both real failures on PR 6442 (run 37064756768) come from CI tooling and a Pi version bump, not from the base-branch feature. Fixes for both already exist on upstream main, so I applied those two commits to the working tree with `git cherry-pick --no-commit`. Nothing is committed or pushed, and no feature file changed. - **Lint 2:** ShellCheck ran out of memory on `bin/fm-teardown.sh` (rss about 8 GB, exit 251, "shellcheck: out of memory"). The rule that broke is that the lint gate must finish on any valid shell root without exceeding the runner's memory ceiling. Upstream commit d719ef3 (kunchenguid#6443) fixes this in `bin/fm-lint.sh`: a root that hits the memory ceiling is retried without `--external-sources`. It also updates `tests/fm-lint.test.sh` and `docs/fm-test-portable-shards.md`. - **Behavior portable serial 6:** `tests/fm-calm-pi-extension.test.sh` failed with "grep disappeared from /export calm.html HTML while calm mode was on". Pi 1.0.1 renamed its HTML export renderer lookup, and upstream commit fede619 (kunchenguid#6530) updates the test to accept the new name. This change is test-only. Both commits applied cleanly. The four touched files are `bin/fm-lint.sh`, `docs/fm-test-portable-shards.md`, `tests/fm-lint.test.sh` and `tests/fm-calm-pi-extension.test.sh`. None of them is in the feature diff, so the feature contract is unchanged. **Local checks:** - `tests/fm-lint.test.sh` passes. - `bin/fm-lint.sh` on `bin/fm-teardown.sh`, `bin/fm-spawn.sh` and `bin/fm-dod-lib.sh` exits 0 with full ShellCheck analysis. - `tests/fm-calm-pi-extension.test.sh` exits 0 with 7 ok and 0 not ok. One case skipped because the Pi package isn't installed locally, so the Pi 1.0.1 export path that failed in CI couldn't be reproduced here. CI needs to confirm it. - I didn't reproduce the 8 GB OOM locally. The PR has to be updated through the pipeline with a normal push: no force push, no replacement PR, no merge
…ole (kunchenguid#6647) * fix(bin): point project workers at the Firstmate skill file The Skill tool cannot resolve a Firstmate skill from another project's worktree, so the launch role names the readable skill file instead. * no-mistakes(review): fix(bin): name Firstmate skill file as fallback only
…ne (kunchenguid#6655) * feat(bin): retire a contribution whose forge object is permanently gone Add fm-contributions.sh retire <task> <url> <captain|fleet> <reason>, which records actor, reason and time on the saved record and removes that task/url pair from known, poll rotation and coverage even while a backlog link remains. Repeating a retire keeps the first provenance; an unrecorded pair, unknown actor, empty reason or unacknowledged pending signal is refused. * no-mistakes(review): Keep retirement per task when settling final owners * no-mistakes(ci): Made the three Greptile fixes the captain chose. ci-1, retirement needs the captain's word: `retire` now accepts only the actor `captain`. Any other actor is refused, including `fleet`. I removed `fleet` from the usage line, the script header (`bin/fm-contributions.sh`), the check in `bin/fm-contributions.sh` and the retired-record validation in `bin/fm-contributions.jq`, which now requires `.actor == "captain"`. The script header now says a retirement always records the captain's word, because the script cannot verify who runs it and the authority to retire is the captain's. The Bearings skill line in `.agents/skills/bearings/SKILL.md` now says `retire` records the captain's word. In the tests, a `fleet` retire is now a refusal case and must leave the record unretired. Every other retire call in the tests uses `captain`. The PR description has not been changed yet: the ruling asks for the same captain's-word statement there, and that belongs to the PR phase. ci-2, blank reasons: the reason check is now `[ -n "${5//[[:space:]]/}" ]`, so a reason made only of spaces or tabs is refused. I added a refusal test that passes a space-tab-space reason. The header also lists a blank reason among the refusals. ci-3, the gone-object test: the test forge wrapper has a new `not-found` fault that returns HTTP 404 for every `api repos/o/r/...` read. The happy-path test `test_retire_ends_observation_of_a_gone_contribution` now uses it in place of the 502 `down` fault, so it models a permanently gone repository rather than an outage. Verification: `bash tests/fm-contributions.test.sh` passed with exit 0. The last lines of its output include the three retire tests passing and no failures. `shellcheck` flagged only SC2034 (`FM_WAKE_QUEUE` unused) and SC1091 (an unfollowed source of `bin/fm-path-lib.sh`), neither on a line this round changed
* test: give the remote-reply whole-log recapture a longer wait * no-mistakes(review): Extend both recapture waits and simplify retry handling
…nguid#6654) * fix(bin): reopen a pending-reply escalation after its resolve A retry of an open decision still appends nothing. A later same-kind escalation after a resolved line for that key appends again, so the next loss is visible. * no-mistakes(ci): Both Greptile findings are fixed in the working tree; the four directly affected test suites pass, and a wider run of related suites had not finished when I returned this result. Invariant: a line already in the status file is recorded, and only a caller with its own evidence of a new episode may append it again. It must hold for every caller of status_event_recorded: the continuity break and the other call in bin/fm-procevent-remote-reply.sh, fm_parent_channel_append_once, and the pending-reply escalation. Changes: - bin/fm-classify-lib.sh: status_event_recorded is back to the idempotent retry check. It returns at the first matching line, and a later resolved line no longer makes that line look new. This fixes ci-1 for every caller and restores the early exit for ci-2, with no separate scan optimization. - bin/fm-pending-reply-lib.sh: _fm_pending_reply_maybe_escalate_locked now owns the reopen. It appends a new blocked line when the record already has an escalated_epoch (it escalated before and was reset) and the keyed decision is no longer open. Otherwise it uses status_event_recorded, so a retry or a resend that leaves the decision open appends nothing. - Comments on status_event_recorded and the pending-reply header describe this scope. Tests: - tests/fm-pending-reply.test.sh: the regression for escalate, operator resolve, second escalate is unchanged and passes. - tests/fm-remote-reply.test.sh: new regression drives the real reader. After an operator resolve of remote-reply-continuity-ios, a repeated handle and ingest of the same break appends nothing and leaves the decision closed. I placed it beside the existing continuity-break test, not in the pending-reply file, because only that file has the reader harness. - tests/fm-classify-corr-token.test.sh and tests/fm-classify-decision-key.test.sh: the cases that expected a blocked line to append again after a resolve now assert it stays recorded. Verification: - fm-classify-decision-key, fm-classify-corr-token, fm-pending-reply and fm-remote-reply test suites all exit 0 with the fix. - With the two bin files reverted to the commit under review, the new continuity regression and the updated parent-publisher case both fail, so they reproduce ci-1. - shellcheck -x on the changed files reports nothing. - Not finished: a background run of every other suite that mentions the parent channel or pending replies had produced no output, pass or fail, when I returned. One known gap: the escalation writes escalated_epoch before phase. If the process dies between those two writes and an operator resolves the key before the next tick, that tick appends a blocked line for the same episode. I left it, because closing it needs new state. Issue 4755 and other escalation behavior are untouched. Nothing is committed
…ker (kunchenguid#6666) * fix: refuse a confirming Enter on the Claude exit picker The background-task picker still classifies as pending, so a retried Enter confirms "Exit and stop tasks". Stop after the Enter that opened it, and raise the existing stale wake with the dialog name. A non-paused secondmate still skips that wake, so a secondmate parked on the picker still looks idle. Model-downgrade confirmation, MCP approval, and any other Claude exit confirmation are not covered, because there is no recorded screen for them. * no-mistakes(review): fix: anchor exit picker match and wake second mates * fix: refuse a typed submit while the Claude exit picker is open A pane that already shows the picker must not receive the message or a confirming Enter. The match requires the recorded heading and footer lines, and it is skipped when no dialog name is being recorded. * no-mistakes(review): restore watcher to main behaviour, drop dialog wake * no-mistakes(test): test: align Herdr picker fixtures with the preflight read * no-mistakes(document): document exit refusal on a recognised dialog * fix: remove the dialog file when exit runs in a subshell do_exit is invoked from a command substitution, so the parent cleanup never saw the path it is supposed to delete. * no-mistakes(review): fix: set the dialog file path after the control lock * no-mistakes(document): document why the dialog file path follows the lock * no-mistakes(ci): The exit cleanup in bin/fm-control.sh now deletes the dialog file first and releases the control lock second. The changes are in the worktree and are not committed. Invariant: only the process that holds the control lock for a task may write or delete that task's dialog file ($STATE/<id>.composer-dialog, the file that carries the picker name from the composer read to the Enter checks). The old cleanup released the lock and then deleted the file, so the delete ran outside the lock. Places where this invariant must hold: control_cleanup is the only place that deletes the file, and the single assignment after CONTROL_LOCK_HELD=1 is the only place that names it. do_exit only truncates the file, and it runs while the parent holds the lock. A process that loses the lock never sets the path, so it deletes nothing (earlier fix, unchanged). No sibling site needed a change. Fix: in control_cleanup, the rm of the dialog file moved above the fm_lock_release call, with a two-line comment that gives the reason. No dialog recognition or supervision code changed. Test: added test_exit_removes_the_dialog_file_before_releasing_the_lock in tests/fm-control-relaunch.test.sh. It runs one `fm-control exit` with a recording rm on PATH. The lock release removes paths at or under the control lock with rm, so the recording rm writes whether the dialog file exists at that moment. The test asserts the last record is "absent". It starts no second command. Verification, all run locally: - Before the fix, the new test failed with "the dialog file must be gone when the control lock is released, got: present". - After the fix, tests/fm-control-relaunch.test.sh exits 0 with 75 ok lines and no "not ok" line, including the new test and the existing test that the file is gone after exit and after relaunch. - tests/fm-control.test.sh exits 0 with 44 ok lines. - shellcheck -x on both changed files exits 0 with no output. One thing I noticed and did not change: tests/fm-control-relaunch.test.sh prints 615 "rm: cannot remove ... Permission denied" lines during its temp-directory teardown. The count is the same with my change reverted, so this change does not cause it, and the suite still exits 0. I could not read the Greptile check log (the check run was not found), so I worked from the finding text and the user instructions
…henguid#6028) * fix: support stock macOS Bash in timeout watchdog * no-mistakes(ci): Fixed ci-1 in tests/fm-timeout-lib.test.sh: both startup-owner failure paths now kill the bounded command group before killing the watchdog. Fault injection reproduced both leaks before the fix and confirmed cleanup afterward. Bash 3.2 suite, syntax check, ShellCheck, and diff checks passed; GNU timeout coverage skipped because the binary is unavailable. Production code unchanged
…nchenguid#6699) Wrap the cd command in a subshell to comply with the cd-guard policy that blocks persistent top-level directory changes in the primary firstmate checkout. The subshell form (cd projects/<name> && ...) is accepted by the policy as documented in issue kunchenguid#6502. Fixes kunchenguid#6502
* Add daily startup growth check
* no-mistakes(review): watch printed startup memory, retain growth baselines, drop knobs
* no-mistakes(review): delegate budget verdict, report before publish, pin shim home
* no-mistakes(review): baseline first sightings silently, drop mtime, spare secondmates
* no-mistakes(review): cap the wake line, validate budget verdict fields
* no-mistakes(review): guard record schema, check appends, tighten assertions
* no-mistakes(review): drop arbitrary tracked library, make re-arm idempotent
* no-mistakes(review): correct tracked-set wording, restore shim guards, register artifacts
* no-mistakes(review): exit on signal instead of publishing partial record
* no-mistakes(document): correct startup-growth record removal cost in state registry
* no-mistakes(test): sweep orphaned empty startup-growth temp records on due evaluation
* no-mistakes(document): note watcher need for armed startup growth check
* no-mistakes(ci): Diagnosed "Behavior portable serial 5": the shard failed on tests/fm-contributions.test.sh in test_arm_plumbs_a_configured_budget_into_the_check_shim (inherited mode) with "generated check did not attempt a read" and a missing forge/calls file. Root cause: bin/fm-contributions.sh:379-382 computes DEADLINE=$(date +%s)+BUDGET and then gates each read on DEADLINE-$(date +%s) >= OBSERVATION_RESERVE (= min(BUDGET,15)). At the one-second budget this test uses, that gate demands zero elapsed whole seconds, so a wall-clock second boundary crossing between the two date calls makes the poll loop break before any forge read. The test calls wrap_forge (which installs a fake date reading $FORGE/clock only when that file exists) but never seeded forge/clock, so it ran against the real clock. The repo already documents this exact hazard at tests/fm-contributions.test.sh:675-677 and freezes the clock in every other budget-constrained test: test_budget_exhaustion_keeps_prior_record (both modes), test_genuine_failure_near_deadline_is_unavailable, test_reservation_defers_later_url_when_fifteen_seconds_do_not_remain, test_slow_read_deadline_kill_is_budget_refusal, test_budget_is_cut_down_to_the_watcher_check_bound. test_arm_plumbs was the only omission; its single loop body covers both the configured and inherited modes. The remaining wrap_forge users run the default 20-second budget (5 seconds of slack above the reserve) and are not reachable by this race. Fix (smallest, matching the sibling idiom): added the clock freeze `/bin/date +%s > "$home/forge/clock"` plus a two-line comment inside that test's loop, before the poll. Three added lines in tests/fm-contributions.test.sh; no production code and no other file touched. Verification: reproduced the exact CI failure message by running a scratch copy whose fake date advances one second per read (worst case of the unfrozen clock) - missing forge/calls, "not ok - generated check did not attempt a read". With the fix, the single test passes 10/10 standalone and the full tests/fm-contributions.test.sh passes all 46 assertions with exit 0. tests/fm-startup-growth-check.test.sh still exits 0. bash -n and shellcheck -S warning are clean on the edited file; scratch repro files were removed, leaving only the intended three-line change. Note for the author: this flake is not caused by this branch - tests/fm-contributions.test.sh is untouched by the PR and the race is pre-existing, surfacing only on a loaded runner (the shard's neighbouring assertions show 80+ second gaps). It was fixed because it is genuine nondeterminism with an established in-repo remedy and the check cannot otherwise go green. No work was done on the unselected greptile findings (ci-2..ci-5) or the cancelled "Behavior portable serial 2" check (ci-6)
* no-mistakes(ci): Diagnosed "Behavior portable serial 6": the omitted log section (fetched with gh api) shows the shard failed on tests/fm-calm-pi-extension.test.sh in test_hidden_block_geometry_e2e with "Pi Calm hidden-block geometry E2E did not complete the /reload viewport transition" (exit=1, duration_ms=23437; the family line pure-contract-unit count=3 duration_ms=51193 failed=1 matches devin-harness 3203 + calm-pi 23437 + task-delivery 24553). Root cause: tests/fm-calm-pi-extension.test.sh:2831 wait_for_geometry_transition detected the /reload by SAMPLING a single intermediate frame - it polled tmux capture-pane for Pi's transient "Reloading keybindings, extensions, skills, prompts, themes, and context files..." box and only accepted the rebuilt transcript afterwards (elif gated on saw_transient). Pi shows that box only while the reload runs and replaces it via dismissReloadBox when done, so on a loaded runner the box can live entirely between two polls; saw_transient then stays 0 forever and the 600-attempt wait times out although the reload fully succeeded. Reproduced locally under CPU oversubscription with CI's Pi 1.0.4: 1 failure in 8 runs, diagnostics proving the mechanism ("DIAG: transition timeout saw_transient=0 attempt=600") while the captured viewport already showed the completed reload status row and the intact collapsed transcript. Not a Pi-version regression: 1.0.4's handleReloadCommand and both banner strings are identical to the installed 0.85.1, and shard 6 of the previous pipeline run (job 112490351105) passed this same script on Pi 1.0.4. Invariant violated: a TUI E2E assertion must key off a durable state the UI retains, never off one intermediate frame polling may miss. Sibling enumeration: the helper was defined once and called once; grep for transient/saw_/two-stage waits across tests/, bin/ and .pi/ found no other one-shot-frame wait - every other wait in the file keys off durable text presence/absence or off continuously repeating animation frames (the working-ship motion checks) where sampling eventually connects; no doc or other test referenced the helper. Fix (smallest, one helper): renamed it wait_for_geometry_reload and made it wait for the durable status row Pi appends once the reload completed and the chat was rebuilt ("Reloaded keybindings, extensions, skills, prompts, themes, and context files", a persistent chat child via showStatus, present in both 0.85.1 and 1.0.4) together with CALM_GEOMETRY_FINAL. That marker is absent before the reload and never appears if the reload throws, so the check is strictly stronger than before (a failed reload now fails the test instead of passing on transient-then-final). One file changed: tests/fm-calm-pi-extension.test.sh, 2 hunks, no production code. Verification: deterministic before/after - with polls spaced 0.4s apart (the loaded-runner worst case) the pre-fix helper fails with exactly the CI message and the post-fix helper passes; 12/12 consecutive passes of the isolated test under load with Pi 1.0.4; full file 15/15 ok exit 0 under LANG=C.utf8 (matching the runner locale); bash -n, shellcheck -S warning and bin/fm-lint.sh clean; scratch repro files and the temp Pi 1.0.4 install removed, git status shows only the one intended modification. Notes: (1) the flake is not caused by this branch - that test file is untouched by the PR and the race is pre-existing; fixed because it is genuine nondeterminism and the check cannot otherwise go green. (2) Under far harsher load than CI applies a separate unrelated flake appeared in the same test: Pi's "Warning: tmux extended-keys is off..." row occasionally lands between the collapsed [skill] ahoy row and the final response, making assert_geometry_gap see 5 rows instead of 2. Different cause, never seen in CI, and its plausible remedies would change key delivery for the other TUI tests in the file, so it was left alone rather than growing this fix
---------
Co-authored-by: Quartermaster <quartermaster@users.noreply.github.com>
kunchenguid#6708) * fix: reopen a remote-reply continuity break after repair A later break for the same route and reason was swallowed after the operator resolved the first one, because the status line matched for the life of the log. The continuity ingest now appends again when the cursor has moved or retirement has reset that episode, and an unchanged re-read still appends nothing. status_event_recorded is unchanged. Its other callers are the pending-reply escalation, which already decides its own episode, the parent-channel note append, and the remote document transfer note. * no-mistakes(review): seed continuity episode for already recorded break line * no-mistakes(document): document when a remote-reply continuity break reopens * no-mistakes(ci): The adapter now stores the continuity episode record before it appends the `blocked` line, so a failed store appends nothing. The changes are uncommitted in the worktree, in `bin/fm-procevent-remote-reply.sh` and `tests/fm-remote-reply.test.sh`. **Invariant:** a continuity `blocked` line is on the parent status log only when the episode record for that break is already stored. Only the `continuity-broken` branch of `cmd_ingest` appends that line, so the fix is at that one place. **What changed in `cmd_ingest`:** - It decides first whether the break needs a line, then stores the episode record, then appends. - If storing the record fails, it stops with "cannot record continuity episode" and appends nothing. - If the line is already on the log and no episode record exists, it stores the record and does not append. **One addition you did not ask for:** if the append fails after the record is stored, the adapter puts the earlier record back (or deletes the new one when none existed). Without that, the retry would read as the unchanged repeat and append nothing, which is the issue 6701 failure again. **Deviation from your test instruction:** the test does not use `chmod` on the cursor directory. `write_continuity_episode` runs `chmod 700` on that directory before every write, so a read-only directory is made writable again. The test instead makes `mktemp` fail for the episode's temporary file in that directory, the same way the existing receipt-failure test does. **Tests added to `tests/fm-remote-reply.test.sh`:** - Store failure: the second break exits 1, appends no `blocked` line and opens no decision. One retry after storage recovers exits 3 and appends a single line. - Append failure: with the status log read-only, the third break exits 1 and appends nothing. One retry after the log is writable exits 3 and appends a single line. **Verification:** `bash tests/fm-remote-reply.test.sh` ends with "ALL TESTS PASSED" with the fix. Against the script at commit b750c828 the same test file fails at "a continuity break appended its line before its episode was stored". `shellcheck -S warning` reports only an unused loop variable at line 667 of the test file, which this change does not touch. I ran no other test files. The Greptile Review check log could not be retrieved, so I worked from the finding text alone * fix: record a continuity break's reader position on its status line A later break at another cursor is then a different line, so the existing duplicate check appends it and reopens the decision. An unchanged re-read builds the same line and appends nothing. * fix: reopen a continuity break after an identical restore A retirement that puts the same bytes back used to rebuild the recorded line, so the later break stayed closed. The retirement count on that line makes the later break distinct. * no-mistakes(review): remove continuity match for full-prefix line without retirement count * no-mistakes(document): clarify what a continuity break status line records * fix: remove the reply cursor before recording retirement A stop between those steps must leave the count unchanged, so an unchanged continuity break still builds the same line.
…is retired (kunchenguid#6733) * fix(control): drop busy_gen when an incarnation is retired A deliberate exit removed the busy sidecar and left busy_gen in the task record, so the two records disagreed about whether that incarnation was still observable. * no-mistakes(review): drop GNU-only chmod and unreached sidecar-absent branch * no-mistakes(review): correct lock comment to name the deadlock * no-mistakes(ci): The test `test_exit_drops_meta_busy_gen_with_the_sidecar` in tests/fm-control.test.sh now compares the whole task record (the `state/<id>.meta` file), so the Greptile finding is fixed. Invariant: after `exit` retires an incarnation, the task record must equal the record from before `exit` with only the `busy_gen` line removed. This test is the only place in the change that asserts the record survives the rewrite, so it is the only site to fix. The other `busy_gen` tests assert that the line stays, and they do not go through the rewrite. What changed: before `exit`, the test writes the record without its `busy_gen` line to `expected.meta`. After `exit`, the test runs `diff` between that expected copy and the real record, and fails with the diff output if they differ. This one comparison replaces the two earlier checks (no `busy_gen` line left, and the `window` line present), because it covers both. I did not change bin/fm-control.sh or any other file. How I know it works: - I ran `bash tests/fm-control.test.sh`: exit code 0, 45 lines starting with `ok`, no other lines. - I temporarily changed the rewrite in bin/fm-control.sh to also drop the `harness` line. The test then failed with `not ok - exit should drop only busy_gen from the task record:` and the diff `< harness=codex`. The earlier `window`-only check would have passed that rewrite. I restored bin/fm-control.sh afterwards; `git status` shows only tests/fm-control.test.sh modified. - `bash -n` and `shellcheck` on the test file report no new warnings from the edit. The change is not committed; the working tree holds it
…#6484) * test(secondmate-harness): scope fake ps -codex label for pid 5252 to the liveness probe Closes kunchenguid#6456 * no-mistakes(ci): Updated the collision test to log and assert that PID 5252 was queried before selecting 4242. Full fm-secondmate harness suite passes --------- Co-authored-by: YifuGu <ironerumi@users.noreply.github.com>
* fix(calm): share the standalone Pi Calm working-ship widget slot Firstmate Calm and the user-global standalone Pi Calm both install an animated working-ship widget during agent runs. Each claimed its own Pi widget key, so a session loading both (the main Firstmate home) rendered two boats. Pi replaces widgets under one key, so claiming the shared "calm-working-ship" slot keeps dual-install sessions to a single boat while a Firstmate-only session is unchanged. Pins the shared slot contract in the working-ship module test so the key cannot silently diverge again. * test(calm): pin the shared working-ship widget key in CI, document dual-install The key-parity assertion inside the Pi fixture only runs where the @earendil-works/pi-coding-agent package is installed, so CI never exercised it. Add a source-level twin that needs nothing but the tracked file, and note in docs/calm.md that the boat shares the standalone Pi Calm working-row widget slot. * no-mistakes(review): Add executable dual-install widget replacement coverage * no-mistakes(review): Guard shared widget cleanup with disposal ownership * no-mistakes(document): Document shared Calm working-ship slot behavior * test(calm): read the standalone Calm slot from its own module The dual-install check registered both boats itself under the shared slot, so it could only prove that Pi replaces a widget under one key: it would still pass if the standalone Pi Calm extension installed its boat under a different key, which is the two-boat regression the check exists to prevent. Read the standalone extension's own working-ship module when it is installed - FM_STANDALONE_CALM_SHIP, else ~/.pi/agent/extensions/calm - and drive the check with the key that module exports, so a rename on either side registers two widgets and fails naming both keys. A pinned shared-slot contract still covers a machine without the extension, and the run reports which side it used instead of passing silently over an absent extension. Verified: the touched Pi Calm suite passes and reads the installed standalone extension; with a copy of it whose key is renamed to calm-working-ship-v2 the suite fails naming the drift. * no-mistakes(review): Gate stock-row restoration by shared-widget ownership * no-mistakes(review): Removed redundant widget-key source assertions * no-mistakes(document): Document shared Calm working-ship widget ownership
…id#6649) * fix(herdr): make exact-resume presentation-lock wait instead of a bounded timeout The exact-resume path in bin/fm-spawn.sh used the same 50-attempt-then- give-up lock acquire as the new-task-create path, but the two paths are not equivalent on contention: a create has no prior state to strand and can safely fall back to a flat layout, while a resume is recovering a specific existing identity that a concurrent recovery may legitimately be holding the lock for. Giving up there does not degrade gracefully, it hard-fails the resume outright. The suite's own concurrent cross-home recoveries test already asserts both concurrent recoveries succeed with a genuine reclaim, and the file's header comment already (inaccurately) claimed lock contention falls back to the ordinary flat layout for both paths alike, so the intended contract was always that recoveries serialize and both succeed, not that either one refuses under a short bound. Give spawn_herdr_presentation_order_lock_acquire a wait mode that uses this file's own established fm_lock_acquire_wait idiom (already used for its other fleet-shared locks) instead of the bounded loop, and use it only at the exact-resume call site. The new-task-create call site is unchanged and keeps its bounded-then-flat-fallback behavior, which is already covered by its own passing test. Dead-owner PID-liveness reclaim inside fm_lock_try_acquire still bounds the wait against a holder that crashed mid-hold. Adds a deterministic regression test that holds the shared session lock from an unrelated process for well past the old bound, then asserts the resume succeeds with a genuine reclaim and took close to the full hold duration, so a fix that merely widens the bound rather than genuinely waiting is still caught. The existing concurrent cross-home recovery test exercises this under real timing but does not reliably outlast a fixed bound on its own. Corrects the header comment's claim that create and resume share one bounded-then-flat-fallback behavior on lock contention; they no longer do. * no-mistakes(document): Document Herdr recovery waiting for presentation lock * no-mistakes(document): Update stale hard-refusal claim in verification log * no-mistakes(ci): Fixed the Greptile finding on tests/fm-backend-herdr-presentation-e2e.test.sh:1389 by bounding the resume lock-wait regression's spawn_task call. Added an optional 4th `deadline_seconds` arg to the `spawn_task` helper (defaults to empty, so all ~20 other existing call sites are unaffected and unwrapped by `timeout`). The lock-wait test now passes `LOCK_WAIT_HOLD_SECONDS + 60` (90s) as the deadline, and a dedicated check for exit code 124 emits a clear "hung for over Xs instead of waiting out a Ys lock hold" diagnostic before falling through to the existing pass/fail assertions, which are unchanged. No product code was touched. Verified with `bash -n`, `shellcheck -x` (no warnings), a standalone reproduction of the timeout/no-timeout/success paths, the project's `bin/fm-lint.sh --fast` on the file (clean), and the full `tests/fm-lint.test.sh` suite (all 46 assertions pass) * no-mistakes(ci): Replaced the direct `timeout "$deadline_seconds"` call in `spawn_task()` (tests/fm-backend-herdr-presentation-e2e.test.sh) with the repo's portable bounded-execution helper: sourced `bin/fm-timeout-lib.sh` at the top of the file and changed `deadline_cmd=(timeout "$deadline_seconds")` to `deadline_cmd=(fm_run_timed "$deadline_seconds")`. This removes the GNU/BSD `timeout` dependency that would fail with exit 127 on a stock macOS host without coreutils, while preserving identical semantics (exit 124 on bound-hit, command's own exit otherwise), which the existing `[ "$LOCK_WAIT_STATUS" -eq 124 ]` diagnostic check already relies on. Verified: `bash -n` syntax check, `bin/fm-lint.sh --fast` clean, full `tests/fm-lint.test.sh` suite (46/46 pass), and a standalone repro confirming `fm_run_timed` returns 124 on timeout and 0 on success identically to the prior `timeout` call. No other direct `timeout` calls exist in this file or elsewhere in the PR's diff, so no sibling sites remain * fix(herdr): gate exact-resume lock wait behind --herdr-resume-lock-wait Keep refuse-by-default on presentation-order lock contention for Herdr exact resume. Callers that need concurrent recoveries to serialize must pass --herdr-resume-lock-wait; unbounded blocking on a third-party session lock is never the default. Update docs and the real-Herdr e2e suite so the default path asserts the refusal and the opt-in path asserts the wait. * no-mistakes(test): Fix e2e test's lost exit status after if/fi with no else branch * docs(herdr): stop advertising --herdr-resume-lock-wait on --relaunch The relaunch path reuses the recorded endpoint and never takes the presentation-order lock, so the flag is inert there. Drop it from the --relaunch usage line and state where the flag applies. * no-mistakes(review): Clarify lock-wait docs; simplify bash-3.2-safe spawn_task helper * no-mistakes(ci): Fixed ci-1 (Greptile P2). In tests/fm-backend-herdr-presentation-e2e.test.sh, the failure cleanup `cleanup_all` stopped only `LOCK_CONTENTION_OWNER_PID`. It now also stops `LOCK_REFUSE_HOLDER_PID` and `LOCK_WAIT_HOLDER_PID`, the holders of the two new contention cases, so a `fail` before their explicit `wait` no longer leaves them running. Both new PIDs are initialised empty next to the existing one, and each is cleared right after its successful `wait` so cleanup never touches a finished PID. I changed nothing else. `bash -n` passes. The real Herdr e2e run passed both new cases ("default resumed identity refuses session lock contention" and "--herdr-resume-lock-wait waits out session lock contention instead of refusing"). The full run hit my 550s timeout in a later, unrelated case, after the new cases passed
….2 (kunchenguid#6762) * fix(bin): let TERM stop a watcher blocked in a pane capture on bash 3.2 Stock macOS bash 3.2 holds a HUP or TERM until a running command substitution's child exits, and the watcher read every pane through $(fm_backend_capture ...). A blocked backend read therefore held the watcher's stop for as long as the read lasted, and a stopped watcher left the hung read orphaned. tests/fm-watch-triage.test.sh test_term_stops_a_watcher_blocked_inside_a_poll failed on /bin/bash 3.2 for this reason while passing on bash 5. Pane captures now go through watcher_capture, which runs the read as a waited background process group recorded like a check's, so the stop is honored at once and watcher_cleanup stops a read still in flight along with its per-call output file. * no-mistakes(review): Run drain-ring idle capture in watcher shell, add regression test * no-mistakes(document): Document watcher TERM handling for blocked checks and captures * no-mistakes(test): Silence bash 3.2 setpgid race noise from watcher captures * fix(bin): verify the capture group and scope the stop claim to pane reads watcher_capture now confirms its background read leads its own process group, as run_check_capture already does, so watcher_cleanup never relies on a group that set -m failed to create. The comment and continuity doc now say only fm_backend_capture pane reads go through watcher_capture; agent-state and composer-state reads still run inside command substitutions.
* feat(spawn): add per-home worker tool exclusions Add an optional per-home config/crew-exclude-tools file listing tool names to hide from workers, one per line, with blank lines and # comments allowed. It applies to every ship and scout launch and relaunch in that home, is never inherited by another home, and does not affect secondmate agents. Pi and pi-signed apply it through --exclude-tools, which also covers MCP tool names. Any other runtime, and a raw launch command, refuses the launch when the list is non-empty rather than ignoring it. Malformed entries are refused before provisioning, and before a relaunch stops a running worker. Exclusions that match no tool in the worker's loaded registry are reported as unverified warnings in its status record instead of refusing the worker. Closes kunchenguid#6744 * no-mistakes(review): Preserve UTF-8 exclusion paths and verify Pi lifecycle behavior * no-mistakes(document): Clarify worker tool exclusion documentation * no-mistakes(ci): Fixed ci-1 in bin/fm-exclude-tools-lib.sh: a failed read now returns an error before printing names, so all shared launch and relaunch callers refuse rather than silently dropping exclusions. Added deterministic regression coverage for a file disappearing after readability checks across Pi/pi-signed ship and scout launches. Reproduced the original failure; verified 83 spawn checks, 77 relaunch checks, direct parser/runtime failure cases, full targeted lint, Bash syntax, and git diff --check. Relaunch tests passed with existing fixture-cleanup permission warnings. ci-2 remains unchanged per the user's decision; the outer executor owns the fresh CI run
kunchenguid#5343) * refactor(bin): share the local Firstmate home walk from the wake library Teardown's walk over the root home and its registered local secondmate homes moves into bin/fm-wake-lib.sh as fm_local_firstmate_state_dirs, next to fm_firstmate_root_home, so a second consumer can count task records across this machine's homes without a copy. Teardown keeps its exact refusal wording through a thin wrapper. * feat(bin): defer spawns beyond a project's declared machine capacity A project whose machine-local resource only serves a few workers at once had no way to tell Firstmate so: every queued item was launched, and the surplus workers spent full-context turns retrying the resource. config/project-capacity in the root home now declares how many workers each named project admits at once on this machine. bin/fm-spawn.sh counts the ship and scout records on the same project origin across the root and its local secondmate homes, skipping ones whose ready PR is recorded, while holding the shared project lock through publication. A spawn with every place held exits 75 before any brief render, endpoint, worktree, record, or backlog move, so the item stays queued; batches report it as deferred. Undeclared projects keep today's uncapped dispatch, and an unreadable declaration refuses rather than guessing the limit. Refs kunchenguid#4237 * no-mistakes(review): Document that capacity matches the clone directory name * no-mistakes(document): Rewrap stale fm-wake-lib root-home doc comment * no-mistakes(review): Dedupe local state dirs by identity to avoid double-counting * no-mistakes(document): Rewrap fm_local_firstmate_state_dirs error doc comment * no-mistakes(ci): I fixed all four Greptile findings. All 14 tests in tests/fm-project-capacity.test.sh pass, and shellcheck at warning level is clean on the changed files. Each new test failed against the old code and passes now. - **ci-1 (spaced names):** a declaration line must give a name its capacity whenever the name is a valid clone directory name. `fm_project_capacity_lookup` now trims each line, skips blank lines and lines whose first non-blank character is `#`, and takes the last field as the capacity. Everything before that field is the name, so it may contain spaces. The old error cases still refuse: a single field is rejected, and trailing text leaves a last field that is not an integer. The library header and docs/configuration.md now say a name starting with `#` cannot be declared. New test `test_spaced_project_name_is_declared` declares `my heavy project 1` next to an indented comment line and gets a deferral. - **ci-2 (unreadable records):** the holder count must never silently leave out a holder. `fm_project_capacity_occupants` now refuses when a local home's state directory exists but cannot be read or listed, or when a `.meta` file cannot be read. The error names the path, and `fm-spawn.sh` shows it in its existing refusal message. New test `test_unreadable_holders_refuse_admission` covers an unreadable record in the root home and an unreadable state directory in a registered local secondmate home, then checks that the spawn is admitted once both are readable. The test is skipped when run as root. - **ci-3 (Orca lock):** any spawn that can become a holder for a capped project must take that project's lock. The lookup now also reports whether the declaration caps any project at all, and an Orca spawn takes the per-origin lock whenever it does. This covers every capped same-origin clone. It also covers some cases where no same-origin clone is capped, because a spawn cannot find clones under other directory names without searching for them. With no declaration file, Orca still skips the lock. The comments in the library and in the `fm-spawn.sh` header are updated. The Orca test now clones the origin as `project-2`, which has no declaration, and checks that its Orca spawn refuses while the lock is held and publishes no record. - **ci-4 (worktrees):** `assert_nothing_created` now also compares the project's `git worktree list` from before and after a deferred spawn. Both tests that call it take that snapshot first. Files changed: bin/fm-project-capacity-lib.sh, bin/fm-spawn.sh, docs/configuration.md, tests/fm-project-capacity.test.sh * fix(bin): declare capacity for a project name that begins with # A clone directory whose name begins with # was skipped as a comment, so that project stayed uncapped. A line is a declaration when the # is written against the rest of the name and the line ends with a capacity; a # followed by whitespace stays a comment. * no-mistakes(document): Rewrap project-capacity library header comment * no-mistakes(ci): Lint 2 fails because this PR's code pushes ShellCheck past its memory cap. ShellCheck ran out of memory analyzing bin/fm-teardown.sh in CI (reason=memory, rc=251, peak about 8.39 GB). On current main the same file passes at about 7.29 GB. **Cause:** the new `fm_local_firstmate_state_dirs` function in bin/fm-wake-lib.sh had a conditional `. fm-secondmate-registry-lib.sh` with a `# shellcheck source=` directive inside the function. ShellCheck followed that source again, inside a function scope, wherever fm-wake-lib.sh is sourced, and bin/fm-teardown.sh is the heaviest root that sources it. Measured locally with `shellcheck --norc --external-sources bin/fm-teardown.sh`: - current main (fd325b1): 7.29 GB - main merged with this PR: 7.86 GB - the same merge without the in-function source: 7.27 GB **Rule this restores:** this change must not make any lint root heavier than it is on main. That function holds the only new nested source in the change. **Fix:** I removed the in-function source, which no caller needs. Both callers already load the registry library at top level before calling the function: - bin/fm-teardown.sh sources it directly. - bin/fm-spawn.sh, the only user of bin/fm-project-capacity-lib.sh, gets it through bin/fm-ff-lib.sh. I also documented the requirement in the function's comment and in the "Requires" note in bin/fm-project-capacity-lib.sh. No behaviour changes. **Verification:** - ShellCheck on head: bin/fm-teardown.sh peaks at 7.12 GB and bin/fm-spawn.sh at 6.68 GB, both with rc=0. bin/fm-wake-lib.sh and bin/fm-project-capacity-lib.sh lint clean. - tests/fm-project-capacity.test.sh, tests/fm-teardown.test.sh (102 ok) and tests/fm-teardown-endpoint-safety.test.sh all pass. Files changed: bin/fm-wake-lib.sh, bin/fm-project-capacity-lib.sh * fix(bin): release the Herdr session lock when reclaim finishes A concurrent resume in another home waits five seconds for that lock. Reclaim is the last presentation change on the recovery path, so holding the lock through the launch tail made the waiter time out. The contributions arm check also freezes its one-second clock, the same way the budget tests do, because an unfrozen clock can tick past before the first forge read. * no-mistakes(review): Keep Herdr session lock through launch handoff after reclaim * no-mistakes(review): Skip the spawning task's own record in capacity count * no-mistakes(review): Restore release test comment above its test * docs: scope PR-ready re-evaluation to a declared project capacity A ready pull request frees a place only when that project declares capacity, so the always-loaded backlog contract should re-evaluate on that handoff only in that case.
… section (kunchenguid#6785) fm-procevent-lavish.sh read labels tag=message rows SESSION-ENDING MESSAGE only when session_ended is true and CAPTAIN MESSAGE otherwise, but the count line always said session_ending_message_count. Several composer messages on a still-open board were therefore counted as session-ending. The count line now follows the same session_ended switch: session_ending_message_count once the session ended, captain_message_count otherwise. Message rows stay out of the annotation count, per triage. Fixes kunchenguid#6743
…henguid#6780) The Herdr presentation lock namespace was the fixed machine-global /tmp/firstmate-herdr-presentation, so on a host where two OS users run Firstmate on Herdr the first account to create it owned it and every teardown from the other account was refused with no way to clear it. Suffix the namespace with the account uid. The owner-uid and mode-700 checks are unchanged, so a foreign-owned or wrong-mode name at this account's path is still refused and never adopted, chowned, or removed. Fixes kunchenguid#4716.
…te (kunchenguid#6809) The OpenCode session plugin's shouldArm kept its own copy of the need test that only looked for in-flight task records, while the turn-end guard decides with fm_supervision_needed in bin/fm-supervision-lib.sh, which also counts registered process-event sources and trusted custom checks. With an empty fleet but any registered source or check, the guard blocked every turn end while the plugin declined to arm - a loop the guard's own repair line could not resolve because it names the plugin as the fix. The plugin now delegates the decision to the shared predicate through bash, keeping the local away-record decline and the x-mode.env arm override. OpenCode plugin test fixtures now carry the real predicate their arming path sources, and the arm suite gains six cases asserting the plugin's decision against the shared verdict over the same synthetic state directories. Co-authored-by: Mia Sun <mia@Bigs-Mac-mini.localdomain>
kunchenguid#6792) * fix(bin): resolve a pending reply only from its own task's status line Remote reply ingestion handed every corr= token in a mate's payload to fm_pending_reply_try_resolve together with that mate's own status log, so one mate echoing another mate's token resolved the other request. Honor a status-file override only when it is the record's own parent_status, and match the corr= token as a whole word. Fixes kunchenguid#6538 * no-mistakes(document): docs: scope remote reply settlement to the asked mate
…nguid#6784) agent-skill-trigger-index claims to be the complete agent-only trigger index but omitted operational-home-layout, session-start-recovery, validation-supervision, ship-landing, scout-completion, and away-quiet-supervision. Add each with its own description's trigger, placed beside the related entries. The decision-hold-lifecycle redirect stub stays out, per triage. Fixes kunchenguid#6503
…nchenguid#6814) * test: share a rename-safe agent stand-in across liveness suites On Ubuntu 26.04, `sleep` is the uutils multicall binary, which refuses to run when invoked through a symlink named after another utility. The Herdr descendant process-walk tests built their agent-named process as a `pi` symlink to the host `sleep`, so the process exited at once, its parent shell was gone before the walk ran, and both cases read `unknown unreadable` and failed on that host. The suite stops at its first failure, so every later case went unrun. The Herdr control smoke test's `claude` symlink has the same construction. The tmux liveness suite already solved this with a host-compiled spinner and a survival-checked `sleep` fallback. That builder moves into tests/lib.sh as fm_agent_standin, and the tmux suite, both Herdr descendant cases, and the Herdr control smoke test now use it. When no stand-in can survive a foreign name, a case skips with the reason instead of failing. tests/fm-test-fixtures.test.sh gains a portable regression with a fake multicall `sleep`, so it bites on hosts whose own `sleep` is single-purpose. * no-mistakes(document): Correct Herdr verification fixture reference * ci: retrigger cancelled shard
…he Stop hook's group is torn down (kunchenguid#6787) * fix(bin): keep the supervision host's pass-through successor out of the hook's process group The successor a main-only pass-through leaves for main shared the Stop hook's process group, so the harness tearing that group down after the exit-2 rewake stopped it. The stop published downtime and the next park's first cycle announced an empty check: rearm-resurface, which woke main again in a loop. Start that successor in a process group of its own, as the hook's own handling successor already is. * no-mistakes(review): Give the at-turn successor left for main its own group * no-mistakes(document): Document own-group successor for turn-start hand-back too * no-mistakes(ci): I made the change you asked for: both new teardown tests in tests/fm-supervision-host.test.sh now call the existing `stop_home_processes "$home"` just before `pass`. The tests are `test_successor_left_at_the_turn_survives_the_hook_process_group_teardown` and `test_pass_through_successor_survives_the_hook_process_group_teardown`. No production code and no other tests changed. The rule broken was that a test must not leave a home's watcher or arm processes running after it passes. These two were the only cases in the changed area that broke it. The other host+hook tests already stop their home, and `test_successor_close_during_main_turn_is_delivered_at_the_next_turn_end` leaves its watcher behind too, but it is an older test you said not to touch. The only reason anything was left over is that the successor's arm now sits in its own process group, outside the hook's teardown. `stop_home_processes` kills the watcher by the pid in its lock file, which stops it no matter which group it is in. **Checks run:** - I ran just these two tests from a scratch copy of the suite (since deleted). Both pass in about 13 seconds. - After each test, a process listing filtered to that test's home directory came back empty once the processes had about a second to exit after TERM. - `bash -n` on the test file passes. - `shellcheck` is not installed here, so I did not lint the file. - I did not run the full serial-2 suite locally. Whether it now finishes under its 30-minute limit will only show on the next CI run
…ters (kunchenguid#6823) * test: use idle composer readiness for Claude tmux guards * no-mistakes(test): Fix attended supervision test expectations and isolate worker state * no-mistakes(document): Correct live guard coverage and readiness documentation * no-mistakes(ci): Captain, fixed SC2100 by quoting the cursor-agent assignment in tests/fm-host-mirror-live-e2e.test.sh. Reproduced the failure before editing; pinned ShellCheck lint on both PR test files, bash syntax checks, and git diff --check now pass * test: preserve attended successor close assertions * no-mistakes(test): Fix attended live test watcher takeover expectations * no-mistakes(document): Correct stale attended guard documentation * Revert "no-mistakes(document): Correct stale attended guard documentation" This reverts commit 8e59d89. * Revert "no-mistakes(test): Fix attended live test watcher takeover expectations" This reverts commit c0b8510.
Merge kunchenguid/firstmate main b062eb9 (35 commits) into the fork at 44d9295, from merge-base d719ef3 (the PR 50 upstream point). 16 paths conflicted, all content conflicts; each keeps both sides. Upstream fixes adopted: watcher survives the Stop hook group teardown (kunchenguid#6787), interruptible pane capture (kunchenguid#6762), busy-inbox escalation (kunchenguid#6518), Claude exit picker refusal (kunchenguid#6666), pending-reply fixes (kunchenguid#6792, kunchenguid#6708, kunchenguid#6654), remote job churn (kunchenguid#6431, kunchenguid#6575), quota read hiccups (kunchenguid#6490), opt-in per-project capacity (kunchenguid#5343), base-branch tasks (kunchenguid#6442), and worker tool exclusions (kunchenguid#6750). Fork additions kept: lane caps and memory admission, preparation records with surgical preps and nav-prep install, ordered dispatch router and Grok bot dispatch, navigation-mate consult, heartbeat deploy-health and served-version check, CI map in learnings, lanes line, push skill, walk claims, checkpoint deadlines, and prompt-waiting wakes. Notable resolutions: - fm-spawn takes the shared project lock for upstream capacity admission and for the fork's relaunch pool-slot reclaim. - watcher_capture keeps upstream's interruptible read and runs it through the fork's checkpoint_read, so the checkpoint deadline still bounds it. - Upstream test fixes for the Pi reload wait and the timeout caller pid are adopted. Left out: the daily startup growth check (kunchenguid#6725). It sources the startup memory budget the fork removed in #72, so it cannot run here. Upstream tests adjusted to fork contracts: the base-branch brief case reads the rendered worker contract, and project-capacity fixtures write the preparation record every fork ship spawn requires.
A Codex launch that cannot join the shared background server stops on "Background server has incompatible feature settings" with Run without daemon, Restart with these settings, and Cancel. The composer reads it as pending text, so doorbells were skipped, and an idle secondmate is exempt from pane staleness, so a mate sat on it for about an hour unseen. fm_composer_blocking_dialog (upstream kunchenguid#6666) now also names this dialog by its recorded structure, so submit retries and exit refuse a confirming Enter on it; option 2 would restart the shared server for every Codex client. The watcher reads each secondmate pane for a recognised dialog and wakes once per episode with its name. Worker panes keep ordinary stale triage. Recorded on codex-cli 0.160.1; idle, typed, and cleared controls on 0.161.0 do not match.
…one line aligning the named-base ship’s preparation record with its direct-PR command. Reproduced the CI failure before fixing; the full affected test, repository lint, Bash syntax, and diff checks now pass. Inventory and receipts: scratchpad-ci-serial4/inventory.md. Hosted CI remains for the outer executor
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Intent
FINAL C1/C3: merge Kun main b062eb9 into the fork the way PRs31,37 and50 did, keeping the eight fork additions in Main captain.md standing2026-10-06 02:16.
Use upstream fixes where Kun has them; only add the missing stuck-dialog secondmate check at the existing pane-state reader.
Then Main runs updatefirstmate after Q install and chat-fix workers report.
MAIN1420 removes the PC restart wait after captain cleared interop11:06Z; this PC-bound catch-up starts under ordinary3GiB/no-sustained-swap-in admission.
Stable-base supports.
The eight fork additions in captain.md's 2026-10-06 02:16 STANDING line: lane caps and memory admission, surgical preps and nav-prep install, dispatch router and Grok bot dispatch, navigation-mate consult, heartbeat deploy-health and served-version check, CI map in learnings, lanes line, push skill.
PRs 31 and 50 brought upstream Firstmate into the fork as one normal merge that keeps both sides, never a reset or rebase.
The stuck-dialog secondmate check is the 10-08 lesson: a Codex second mate sat about an hour on the "Background server has incompatible feature settings" choice (1. Run without daemon this time / 2. Restart with these settings / 3. Cancel) while doorbells were skipped as pending text and replies went missed.
MAIN1431: stop this Opus worker cleanly now with fm-control exit, preserve its copy, and relaunch after2026-10-08T13:40Z. No new Claude worker until then; current router stays unchanged and new starts must be stable-base-critical.
MAIN1434: QUOTA NOTICE UPDATE (captain 04:28 PDT; REPLACES my 'Codex last, no new Claude until 13:40Z' notice): keep working, no top-up. Use Codex first as your router says until the current Codex account empties; Main then switches everyone to the tegris Codex account; when that empties, Claude is used to the end (new features and UI/UX on Fable instead of Astra), then the second Claude account. Stable-base work first, no wasted tokens: no idle long reviews, no duplicate runs. The Kun catch-up may keep running on Opus.
Accepted specification from the preparation record (not the captain's words):
Expected outcomes and how to check each
2. Behaviour spec
Upstream already-supported supervision/start/stop/dispatch behavior adopts through normal non-forced Git merge with conflict resolutions preserving fork contracts. Startup and recovery still own one session lock, one supervision cycle and only recorded work; dialogs are classified at the existing pane-state owner with a specific stopped/dialog state rather than false work. Unknown evidence remains unknown; active workers retain custody.
11. Definition of done
Exact Kunb062eb94 is merged into a clean isolated fork PR with named additions retained, C3 classified as upstream-covered or narrowly fixed with real harness evidence; native no-mistakes completes, non-draft current-head required CI passes, actual PR URL and head reported. Only guarded supervisor merge; post-main CI must pass before task landing cleanup. Main all-home update remains owned separately.
What Changed
b062eb94, adding opt-in project capacity limits, worker tool exclusions, named task base branches, and pipeline-spend recording.Risk Assessment
✅ Low: The authorized fix restores both files exactly to a8ba9c2 without introducing new machinery; this assessment covers only that restore and its evidence handoff.
Testing
Ancestry and restore checks, focused regressions, real harness controls, remote-worker serving and named Herdr E2E passed. Retained terminal HTML and product-state evidence, repaired fixture cleanup, and removed disposable labs. Herdr ran detached without a GUI screenshot. CI and installed adoption remain with the outer executor.
Evidence: Rendered captures of nine real terminal surfaces
Source: Rendered captures of nine real terminal surfaces
Evidence: Codex dialog submission refusal
Source: Codex dialog submission refusal
Evidence: Claude dialog submission refusal
Source: Claude dialog submission refusal
Evidence: Actual supervision escalation
Source: Actual supervision escalation
Evidence: Remote worker completion and claim state
Source: Remote worker completion and claim state
Evidence: Ordered dispatch CLI results
Source: Ordered dispatch CLI results
Evidence: Fork preservation matrix and evidence boundaries
Source: Fork preservation matrix and evidence boundaries
Evidence: Cleanup repair verification
Source: Cleanup repair verification
Pipeline
Updates from git push no-mistakes
✅ **intent** - passed
✅ No issues found.
✅ **Rebase** - passed
✅ No issues found.
🔧 **Review** - 2 issues found → auto-fixed (3) ✅
bin/fm-composer-lib.sh:1838- Standards: .agents/skills/firstmate-coding-guidelines/SKILL.md:101-106 requires a live guard that exercises installed harnesses, identifies their versions, and refuses a pass that checked nothing. Both new dialog recognizers lack that guard: bin/fm-composer-lib.sh:1838 (Codex) and bin/fm-composer-lib.sh:1824 (Claude). tests/fm-composer-lib.test.sh:1264, tests/fm-composer-lib.test.sh:1108, and tests/fm-watch-triage.test.sh:6725 use constructed screens; docs/verification/runtime-backends.md:1364 and docs/verification/runtime-backends.md:1382 contain manual observations without a repeatable refresh guard. Add executable live coverage with ordinary composer controls and explicit unavailable/version diagnostics. Dependent changed paths are bin/fm-backend.sh:846 (pre-submit), bin/fm-composer-lib.sh:2044 and bin/fm-tmux-lib.sh:254 (retry), bin/backends/herdr.sh:3614 and bin/backends/herdr.sh:3626 (Herdr retry), bin/fm-control.sh:758, bin/fm-control.sh:797, and bin/fm-control.sh:807 (exit), and bin/fm-watch.sh:2431 (secondmate detection).bin/fm-watch.sh:2437- Spec: "Secondmate dialogs classified at pane-state seam" still loses the alarm under away or quiet supervision. Relaunch a secondmate whose last done: status was already consumed, then stop its launch on the recorded Codex dialog. The new stale wake enters bin/fm-supervise-daemon.sh:1568, which discards its dialog detail; classify_stale at bin/fm-supervise-daemon.sh:462 returns self for the old terminal status. bin/fm-supervise-daemon.sh:1666 clears wedge tracking, and bin/fm-supervise-daemon.sh:1726 acknowledges the wake. Meanwhile bin/fm-watch.sh:2435 and bin/fm-watch.sh:2438 suppress further dialog alarms, and bin/fm-watch.sh:3800 exempts the mate from ordinary pane staleness. The original parked-dialog failure therefore remains reachable indefinitely. Both dialog recognizers, bin/fm-composer-lib.sh:1824 and bin/fm-composer-lib.sh:1838, share this path in both daemon modes. Route recognized dialog wakes directly to escalation at the existing daemon dispatch boundary, analogous to bin/fm-supervise-daemon.sh:1566, preserving the dialog name.🔧 Fix applied.
5 issues (2 errors, 3 warnings) still open:
bin/fm-watch.sh:2437- Spec: "Secondmate dialogs classified at pane-state seam" still loses the alarm under away or quiet supervision. Relaunch a secondmate whose last done: status was already consumed, then stop its launch on the recorded Codex dialog. The new stale wake enters bin/fm-supervise-daemon.sh:1568, which discards its dialog detail; classify_stale at bin/fm-supervise-daemon.sh:462 returns self for the old terminal status. bin/fm-supervise-daemon.sh:1666 clears wedge tracking, and bin/fm-supervise-daemon.sh:1726 acknowledges the wake. Meanwhile bin/fm-watch.sh:2435 and bin/fm-watch.sh:2438 suppress further dialog alarms, and bin/fm-watch.sh:3800 exempts the mate from ordinary pane staleness. The original parked-dialog failure therefore remains reachable indefinitely. Both dialog recognizers, bin/fm-composer-lib.sh:1824 and bin/fm-composer-lib.sh:1838, share this path in both daemon modes. Route recognized dialog wakes directly to escalation at the existing daemon dispatch boundary, analogous to bin/fm-supervise-daemon.sh:1566, preserving the dialog name.bin/fm-remote-job-lib.sh:865- Standards: firstmate-coding-guidelines/SKILL.md:78 requires compatibility across supported platforms. The new claim reaper unconditionally uses GNU-style touch -d. On stock macOS it fails, clears stamp, skips expired-claim removal and the hourly marker update, then returns success. Claims accumulate and subsequent sweeps repeat the failure. The same assumption appears at tests/fm-remote-job-claim-retention.test.sh:29, making that regression fail before exercising retention. Use portable timestamp creation at both sites while preserving the fractional cutoff.tests/fm-composer-dialog-live-e2e.test.sh:42- Standards: firstmate-coding-guidelines/SKILL.md:103 requires token-free live guards to run by default wherever their tools are installed. Round 1's new guard instead exits successfully with a skip when tmux and a harness are installed but operator-prepared panes are missing, checking no surface. Both harnesses share tests/fm-composer-dialog-live-e2e.test.sh:31-42; the unknown control shares line 38. After default-on admission, report missing required inputs as failure rather than capability-skip. Explicit disable and absent-harness handling can remain.bin/fm-dod-lib.sh:1384- Standards: bin/fm-dod-lib.sh:1382-1384 requires this re-review to consume the exact class inventory retained before fixing. No retained inventory reference was supplied or found in the worktree; the named evidence root also has no directory for this worktree ID. Round 1's occurrence inventory, search scope, negative evidence and regression receipts therefore remain unverified. Provide the existing retained artifact or explicitly accept this evidence gap; commit contents and prompt delivery do not establish the required handoff.bin/fm-watch.sh:2435- Spec: "Secondmate dialogs classified at pane-state seam" still loses a replacement's dialog. Surface the Codex dialog, acknowledge the wake, choose Cancel, then relaunch the secondmate on the same pane before another watcher capture. The replacement encounters the same mismatch, but the old name-only marker suppresses its alarm indefinitely. Round 1 fixed daemon routing but left this watcher lifecycle sibling. Deduplicate by the existing task spawn_gen plus dialog name at this reader. Related sites: bin/fm-watch.sh:2438 marker write, :3788 dialog dispatch, :3800 stale exemption and :1217 automatic relaunch; bin/fm-control.sh:1208 manual relaunch; bin/fm-spawn.sh:5551 replacement generation. Both recognizers at bin/fm-composer-lib.sh:1824 and :1838 share the suppression path.🔧 Fix applied.
4 warnings still open:
bin/fm-remote-job-lib.sh:865- Standards: firstmate-coding-guidelines/SKILL.md:78 requires compatibility across supported platforms. The new claim reaper unconditionally uses GNU-style touch -d. On stock macOS it fails, clears stamp, skips expired-claim removal and the hourly marker update, then returns success. Claims accumulate and subsequent sweeps repeat the failure. The same assumption appears at tests/fm-remote-job-claim-retention.test.sh:29, making that regression fail before exercising retention. Use portable timestamp creation at both sites while preserving the fractional cutoff.bin/fm-dod-lib.sh:1384- Standards: bin/fm-dod-lib.sh:1382-1384 requires this re-review to consume the exact class inventory retained before fixing. No retained inventory reference was supplied or found in the worktree; the named evidence root also has no directory for this worktree ID. Round 1's occurrence inventory, search scope, negative evidence and regression receipts therefore remain unverified. Provide the existing retained artifact or explicitly accept this evidence gap; commit contents and prompt delivery do not establish the required handoff.bin/fm-remote-job-lib.sh:855- Standards: the supported-backend review rule in .agents/skills/firstmate-coding-guidelines/SKILL.md:78-79 applies here. Round 2 replaced GNU touch with mandatory python3, which docs/remote-secondmates.md:323-325 does not require. A remote worker without Python skips expired-claim removal and never advances the sweep marker, repeatedly accumulating claims. Related sites: bin/fm-remote-job-lib.sh:864-870, marker publication and removal; bin/fm-remote-job-worker.sh:1244, ignored sweep failure; tests/fm-remote-job-claim-retention.test.sh:31, the same dependency. Remove this added dependency and reduce Round 2 to a portable timestamp fix using the existing toolchain. The scope extension, rather than the defect, needs authorization.bin/fm-dod-lib.sh:1384- Standards: bin/fm-dod-lib.sh:1382-1384 requires re-review to consume the exact inventory retained before fixing. No inventory reference was supplied or found in this worktree, and the evidence root has no directory for this worktree ID. The inventories and regression receipts for both fix rounds remain unverified. Provide the retained artifacts or explicitly accept this evidence gap; the commits and prior finding descriptions do not establish the required handoff.🔧 Fix applied.
✅ Re-checked - no issues remain.
✅ **Test** - passed
✅ No issues found.
git merge-base --is-ancestor b062eb94 HEAD; fork-base ancestry and merge-parent readsgit diff a8ba9c2b -- bin/fm-remote-job-lib.sh tests/fm-remote-job-claim-retention.test.sh- emptybash tests/fm-remote-job-claim-retention.test.shbash tests/fm-composer-lib.test.shFM_TEST_ONLY=test_secondmate_dialog_generation_round bash tests/fm-watch-triage.test.shFM_TEST_ONLY=test_dialog_dispatch_round bash tests/fm-daemon.test.shbash tests/fm-dispatch-select.test.sh;bash tests/fm-project-capacity.test.shbash tests/fm-prep-install.test.sh;bash tests/fm-grok-bot-dispatch.test.shbash tests/fm-remote-job-claim-reap.test.shand retained evidence driver against the real workerbash tests/fm-backend-herdr-presentation-e2e.test.shthrough guarded named-session labsPrivate 120x40 tmux: actual Codex and Claude dialogs, composer controls, submission refusal, watcher deduplication and generation replacementRealbin/fm-dispatch-select.shwith disposable ordered-dispatch and quota-fact configurationFocused cleanup_all RED/GREEN execution, symlink-boundary check, lab teardown and final diff review✅ **Document** - passed
✅ No issues found.
🔧 **Lint** - 1 issue found → auto-fixed ✅
🔧 Fix applied.
✅ Re-checked - no issues remain.
✅ **Push** - passed
✅ No issues found.