Add support for Uno Q

[sebromero]

This PR adds support for RS485 on Arduino Uno Q with the SPE shield mounted.

[sebromero]

@manchoz If you happen to have an SPE shield, would you mind testing this?
e.g. sending data to Opta:

#include <ArduinoRS485.h>
int counter = 0;
void setup() {
  uint32_t baudRate = 9600;
  RS485.begin(baudRate);
  const auto bitduration { 1.f / baudRate };
  const auto wordlen { 9.6f }; // OR 10.0f depending on the channel configuration
  const auto preDelayBR { bitduration * wordlen * 3.5f * 1e6 };
  const auto postDelayBR { bitduration * wordlen * 3.5f * 1e6 };  
  RS485.setDelays(preDelayBR, postDelayBR);
}
void loop() {
  RS485.beginTransmission();
  RS485.print("hello ");
  RS485.println(counter);
  RS485.endTransmission();
  counter++;
  delay(1000);
}

[github-actions]

Memory usage change @ fc2cffe

Board	flash	%	RAM for global variables	%
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A
arduino:samd:mkr1000	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrfox1200	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrgsm1400	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrnb1500	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrvidor4000	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwan1300	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwan1310	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrwifi1010	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:samd:mkrzero	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0
arduino:mbed_opta:opta	0 - 0	0.0 - 0.0	0 - 0	0.0 - 0.0

Click for full report table

Board	examples/RS485Passthrough flash	%	examples/RS485Passthrough RAM for global variables	%	examples/RS485Receiver flash	%	examples/RS485Receiver RAM for global variables	%	examples/RS485Sender flash	%	examples/RS485Sender RAM for global variables	%
arduino:mbed_portenta:envie_m7	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
arduino:samd:mkr1000	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrfox1200	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrgsm1400	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrnb1500	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrvidor4000	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwan1300	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwan1310	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrwifi1010	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:samd:mkrzero	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0
arduino:mbed_opta:opta	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0	0	0.0

Click for full report CSV

Board,examples/RS485Passthrough<br>flash,%,examples/RS485Passthrough<br>RAM for global variables,%,examples/RS485Receiver<br>flash,%,examples/RS485Receiver<br>RAM for global variables,%,examples/RS485Sender<br>flash,%,examples/RS485Sender<br>RAM for global variables,%
arduino:mbed_portenta:envie_m7,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A
arduino:samd:mkr1000,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrfox1200,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrgsm1400,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrnb1500,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrvidor4000,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwan1300,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwan1310,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrwifi1010,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:samd:mkrzero,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0
arduino:mbed_opta:opta,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0,0,0.0