add numpy compatible trace

add doc for trace

python/mxnet/_numpy_op_doc.py

@@ -516,3 +516,52 @@ def _np__linalg_svd(a):
     array(0.)
     """
     pass
+
+
+def _np_trace(a, offset=0, axis1=0, axis2=1, out=None):
+    """trace(a, offset=0, axis1=0, axis2=1, out=None)
+
+    Return the sum along diagonals of the array.
+
+    If `a` is 2-D, the sum along its diagonal with the given offset
+    is returned, i.e., the sum of elements ``a[i,i+offset]`` for all i.
+
+    If `a` has more than two dimensions, then the axes specified by axis1 and
+    axis2 are used to determine the 2-D sub-arrays whose traces are returned.
+    The shape of the resulting array is the same as that of `a` with `axis1`
+    and `axis2` removed.
+
+    Parameters
+    ----------
+    a : ndarray
+        Input array, from which the diagonals are taken.
+    offset : int, optional
+        Offset of the diagonal from the main diagonal. Can be both positive
+        and negative. Defaults to 0.
+    axis1, axis2 : int, optional
+        Axes to be used as the first and second axis of the 2-D sub-arrays
+        from which the diagonals should be taken. Defaults are the first two
+        axes of `a`.
+    out : ndarray, optional
+        Array into which the output is placed. It must be of the right shape
+        and right type to hold the output.
+
+    Returns
+    -------
+    sum_along_diagonals : ndarray
+        If `a` is 2-D, the sum along the diagonal is returned.  If `a` has
+        larger dimensions, then an array of sums along diagonals is returned.
+
+    Examples
+    --------
+    >>> a = np.array([[1, 0, 0], [0, 1, 0], [0, 0, 1]])
+    >>> np.trace(a)
+    array(3.)
+    >>> a = np.arange(8).reshape((2, 2, 2))
+    >>> np.trace(a)
+    array([6., 8.])
+    >>> a = np.arange(24).reshape((2, 2, 2, 3))
+    >>> np.trace(a).shape
+    (2, 3)
+    """
+    pass

src/operator/numpy/np_trace_op-inl.h

@@ -0,0 +1,255 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+/*!
+ * \file np_trace_op-inl.h
+ * \brief Function definition of matrix numpy-compatible trace operator
+ */
+
+#ifndef MXNET_OPERATOR_NUMPY_NP_TRACE_OP_INL_H_
+#define MXNET_OPERATOR_NUMPY_NP_TRACE_OP_INL_H_
+
+#include <dmlc/parameter.h>
+#include <mxnet/operator_util.h>
+#include <vector>
+#include <utility>
+#include <algorithm>
+#include "../mxnet_op.h"
+#include "../operator_common.h"
+#include "../elemwise_op_common.h"
+#include "../tensor/broadcast_reduce_op.h"
+
+namespace mxnet {
+namespace op {
+
+struct NumpyTraceParam: public dmlc::Parameter<NumpyTraceParam> {
+  int offset, axis1, axis2;
+  DMLC_DECLARE_PARAMETER(NumpyTraceParam) {
+    DMLC_DECLARE_FIELD(offset)
+    .set_default(0)
+    .describe("Offset of the diagonal from the main diagonal. "
+              "Can be both positive and negative. Defaults to 0.");
+    DMLC_DECLARE_FIELD(axis1)
+    .set_default(0)
+    .describe("Axes to be used as the first axis of the 2-D sub-arrays "
+              "from which the diagonals should be taken. Defaults to 0.");
+    DMLC_DECLARE_FIELD(axis2)
+    .set_default(1)
+    .describe("Axes to be used as the second axis of the 2-D sub-arrays "
+              "from which the diagonals should be taken. Defaults to 1.");
+  }
+};
+
+template<int ndim, int req, bool back>
+struct numpy_trace {
+  template<typename DType>
+  MSHADOW_XINLINE static void Map(index_t i, DType* out, const DType* a,
+                                  mshadow::Shape<ndim> oshape,
+                                  mshadow::Shape<ndim> ishape,
+                                  index_t stride, index_t offset, int dlength) {
+    using namespace mxnet_op;
+    using namespace mshadow;
+    index_t j = ravel(unravel(i, oshape), ishape) + offset;
+    if (back) {
+      for (index_t k = 0; k < dlength; ++k) {
+        KERNEL_ASSIGN(out[j], req, a[i]);
+        j += stride;
+      }
+    } else {
+      if (req == kWriteTo) {
+        out[i] = 0;
+        for (index_t k = 0; k < dlength; ++k) {
+          out[i] += a[j];
+          j += stride;
+        }
+      } else if (req == kAddTo) {
+        for (index_t k = 0; k < dlength; ++k) {
+          out[i] += a[j];
+          j += stride;
+        }
+      }
+    }
+  }
+};
+
+template<typename xpu, bool back>
+void NumpyTraceOpProcess(const TBlob& in_data,
+                         const TBlob& out_data,
+                         const mxnet::TShape& ishape,
+                         const mxnet::TShape& oshape,
+                         index_t dsize,
+                         const NumpyTraceParam& param,
+                         mxnet_op::Stream<xpu> *s,
+                         const std::vector<OpReqType>& req) {
+  using namespace mxnet_op;
+  using namespace mshadow;
+  if (dsize == 0) {
+    if (back) {
+      if (out_data.Size() != 0) {
+        MSHADOW_TYPE_SWITCH(out_data.type_flag_, DType, {
+          MXNET_ASSIGN_REQ_SWITCH(req[0], req_type, {
+            if (req_type == kWriteTo) {
+              out_data.FlatTo1D<xpu, DType>(s) = 0;
+            }
+          });
+        });
+      }
+    }
+    return;
+  } else if (ishape.Size() == 0) {
+    if (!back) {
+      MSHADOW_TYPE_SWITCH(out_data.type_flag_, DType, {
+        MXNET_ASSIGN_REQ_SWITCH(req[0], req_type, {
+          if (req_type == kWriteTo) {
+            out_data.FlatTo1D<xpu, DType>(s) = 0;
+          }
+        });
+      });
+    }
+    return;
+  }
+  uint32_t x1 = CheckAxis(param.axis1, ishape.ndim());
+  uint32_t x2 = CheckAxis(param.axis2, ishape.ndim());
+
+  uint32_t idim = ishape.ndim();
+
+  uint32_t minx = x1, maxx = x2;
+  if (minx > maxx) {
+    std::swap(minx, maxx);
+  }
+
+  // merges contiguous axes that are not separated
+  // by axis1 or axis2 since they can be directly
+  // mapped to the output and there is no need
+  // to distinguish them
+  // (After this the input will have no more than
+  // three axes, hence improving the rave and
+  // unravel efficiency)
+
+  index_t oleading = 1,
+          obody = 1,
+          otrailing = 1;
+
+  for (uint32_t i = 0; i < minx; ++i) {
+    oleading *= ishape[i];
+  }
+  for (uint32_t i = minx + 1; i < maxx; ++i) {
+    obody *= ishape[i];
+  }
+  for (uint32_t i = maxx + 1; i < idim; ++i) {
+    otrailing *= ishape[i];
+  }
+
+  index_t ileading = oleading,
+          ibody = obody * ishape[minx],
+          itrailing = otrailing * ishape[maxx];
+
+  index_t stride1 = itrailing * obody,
+          stride2 = otrailing;
+  // stride1 + stride2 is the stride for
+  // iterating over the diagonal in question
+
+  if (x1 == maxx) {
+    std::swap(stride1, stride2);
+  }
+
+  // the extra index offset introduced by offset
+  index_t offset;
+  if (param.offset > 0) {
+    offset = stride2 * param.offset;
+  } else if (param.offset < 0) {
+    offset = stride1 * -param.offset;
+  } else {
+    offset = 0;
+  }
+
+  // number of elements in the offset diagonal
+  // may be negative
+  int dlength;
+  if (param.offset > 0) {
+    dlength = std::min(ishape[x1], ishape[x2] - param.offset);
+  } else if (param.offset < 0) {
+    dlength = std::min(ishape[x1] - (-param.offset), ishape[x2]);
+  } else {
+    dlength = std::min(ishape[x1], ishape[x2]);
+  }
+
+  MSHADOW_TYPE_SWITCH(out_data.type_flag_, DType, {
+    MXNET_ASSIGN_REQ_SWITCH(req[0], req_type, {
+      if (back) {
+        out_data.FlatTo1D<xpu, DType>(s) = 0;
+      }
+      Kernel<numpy_trace<3, req_type, back>, xpu>::Launch(s, dsize, out_data.dptr<DType>(),
+                                                          in_data.dptr<DType>(),
+                                                          Shape3(oleading, obody, otrailing),
+                                                          Shape3(ileading, ibody, itrailing),
+                                                          stride1 + stride2, offset, dlength);
+    });
+  });
+}
+
+template<typename xpu>
+void NumpyTraceOpForward(const nnvm::NodeAttrs& attrs,
+                         const OpContext& ctx,
+                         const std::vector<TBlob>& inputs,
+                         const std::vector<OpReqType>& req,
+                         const std::vector<TBlob>& outputs) {
+  using namespace mxnet_op;
+  using namespace mshadow;
+  CHECK_EQ(inputs.size(), 1U);
+  CHECK_EQ(outputs.size(), 1U);
+  CHECK_EQ(req.size(), 1U);
+  mshadow::Stream<xpu> *s = ctx.get_stream<xpu>();
+  const TBlob& in_data = inputs[0];
+  const TBlob& out_data = outputs[0];
+  const mxnet::TShape& ishape = inputs[0].shape_;
+  const mxnet::TShape& oshape = outputs[0].shape_;
+  const NumpyTraceParam& param = nnvm::get<NumpyTraceParam>(attrs.parsed);
+
+  NumpyTraceOpProcess<xpu, false>(in_data, out_data, ishape, oshape,
+                                  out_data.Size(), param, s, req);
+}
+
+template<typename xpu>
+void NumpyTraceOpBackward(const nnvm::NodeAttrs& attrs,
+                          const OpContext& ctx,
+                          const std::vector<TBlob>& inputs,
+                          const std::vector<OpReqType>& req,
+                          const std::vector<TBlob>& outputs) {
+  using namespace mxnet_op;
+  using namespace mshadow;
+  CHECK_EQ(inputs.size(), 1U);
+  CHECK_EQ(outputs.size(), 1U);
+  CHECK_EQ(req.size(), 1U);
+  Stream<xpu> *s = ctx.get_stream<xpu>();
+
+  const TBlob& in_data = inputs[0];
+  const TBlob& out_data = outputs[0];
+  const mxnet::TShape& ishape = inputs[0].shape_;
+  const mxnet::TShape& oshape = outputs[0].shape_;
+  const NumpyTraceParam& param = nnvm::get<NumpyTraceParam>(attrs.parsed);
+
+  NumpyTraceOpProcess<xpu, true>(in_data, out_data, oshape, ishape,
+                                 in_data.Size(), param, s, req);
+}
+
+}  // namespace op
+}  // namespace mxnet
+
+#endif  // MXNET_OPERATOR_NUMPY_NP_TRACE_OP_INL_H_