drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare

[ Upstream commit 5f18c07 ]

The panel has a prepare call which is before video starts, and an
enable call which is after.
The Toshiba bridge should be configured before video, so move
the relevant power and initialisation calls to prepare.

Fixes: 2f733d6 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c

@@ -265,7 +265,7 @@ static int rpi_touchscreen_noop(struct drm_panel *panel)
 	return 0;
 }
 
-static int rpi_touchscreen_enable(struct drm_panel *panel)
+static int rpi_touchscreen_prepare(struct drm_panel *panel)
 {
 	struct rpi_touchscreen *ts = panel_to_ts(panel);
 	int i;
@@ -295,6 +295,13 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
 	rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01);
 	msleep(100);
 
+	return 0;
+}
+
+static int rpi_touchscreen_enable(struct drm_panel *panel)
+{
+	struct rpi_touchscreen *ts = panel_to_ts(panel);
+
 	/* Turn on the backlight. */
 	rpi_touchscreen_i2c_write(ts, REG_PWM, 255);
 
@@ -349,7 +356,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel,
 static const struct drm_panel_funcs rpi_touchscreen_funcs = {
 	.disable = rpi_touchscreen_disable,
 	.unprepare = rpi_touchscreen_noop,
-	.prepare = rpi_touchscreen_noop,
+	.prepare = rpi_touchscreen_prepare,
 	.enable = rpi_touchscreen_enable,
 	.get_modes = rpi_touchscreen_get_modes,
 };