- Created by als0052
- Created on 03-30-2021
- Updated on 03-31-2021
- Add print settings later once successful prints are made
- Fix the offset issue for the Horizontal Stabilizer Key Extrusions so they line up properly with the empennage
- Re-export the .stl file for Right and Left Horizontal Stabilizers
Author: Shyam Murali
Appears to be C-130J Extended Forward Fuselage
Modification to a Solid Works C-130H or C-130J 3D model for 3D printing with either PLA or PETG on a Prusa i3 Mk3s.
These files will use a form of the British small arms numbering system. Small changes are indicated by the addition of an asterisk ('star', *) to the Mk ('Mark') number. The numbering will be done in roman numerals
- Mk IV
- First modification attempt
- Mk V
- All parts designed to fit together with 3D printed 'keys'
- No model scaling in Solid Works. Model is scaled in the slicer
- Separate parts are created by cutting the original model at strategic locations
- The parts are converted to .stl files and then sliced using PrusaSlicer2 or Simplify 3D
- Mk V*
- Small modifications to the Mk V design
- Mk VI
- Complete re-work of the Mk V design
- Different configurations instead of separate parts
- Might be causing stability issues in Solid Works... Save often!!
- Uses combination of 3D printed 'keys' and metal fasteners
- Re-work started after realization that printing the empennage in one piece is not going to work out without soluble support
- Model is scaled in SolidWorks to 25% the original size from Shyam's 3D model
- If a different scale is needed the 3D model will have to be significantly re-worked in SolidWorks
- Mk VI*
- Minor changes to the Mk VI design
- Does away with the M3 screws between the Forward-Center Fuselage boundary to affix the Wing Center Box to the Center Fuselage.
- Instead screws will be mounted vertically to affix the Wing Center Box to the Center Fuselage
3d_print_c130/
README.md
iaf-lockheed-martin-c-130j-super-hercules-1.snapshot.7/
Cutup Model/
Mk VI/
Mk VIstar/
Mk IV.zip/ // Archived
Mk V.zip/ // Archived
Mk Vstar.zip/ // Archived
S3D/ // Simplify 3D factory files, support files, G-code files, etc.
Old Settings/ // Non-current Simplify 3D files
C-130 No Markings.zip // Original 3D model without the markings and surface details
C-130.zip // Backup copy of the original model
c-130-hercules.snapshot.1.zip // Different model that didn't workout. Made by different author.