-
Using Watchtower? See the Note on Watchtower at the bottom of this readme
-
Due to a known issue with Docker and libseccomp <2.5, you may run into issues running
2022.04
and later on host systems with an older version oflibseccomp2
(Such as Debian/Raspbian buster or Ubuntu 20.04, and maybe CentOS 7).The first recommendation is to upgrade your host OS, which will include a more up to date (and fixed) version of
libseccomp
.If you absolutely cannot do this, some users have reported success in updating
libseccomp2
via backports on debian, or similar via updates on Ubuntu. You can try this workaround at your own risk (Note, you may also find that you need the latestdocker.io
(more details here) -
Some users have reported issues with using the
--privileged
flag on2022.04
and above. TL;DR, don't use that mode, and be explicit with the permitted caps (if needed) instead -
As of
2022.04.01
, settingCAP_NET_ADMIN
is only required if you are using Pi-hole as your DHCP server. The container will only try to set caps that are explicitly granted (or natively available) -
In
2022.01
and later, the defaultDNSMASQ_USER
has been changed topihole
, however this may cause issues on some systems such as Synology, see Issue #963 for more information. If the container won't start due to issues setting capabilities, setDNSMASQ_USER
toroot
in your environment.
- Copy docker-compose.yml.example to docker-compose.yml and update as needed. See example below: Docker-compose example:
version: "3"
# More info at https://github.com/pi-hole/docker-pi-hole/ and https://docs.pi-hole.net/
services:
pihole:
container_name: pihole
image: pihole/pihole:latest
# For DHCP it is recommended to remove these ports and instead add: network_mode: "host"
ports:
- "53:53/tcp"
- "53:53/udp"
- "67:67/udp" # Only required if you are using Pi-hole as your DHCP server
- "80:80/tcp"
environment:
TZ: 'America/Chicago'
# WEBPASSWORD: 'set a secure password here or it will be random'
# Volumes store your data between container upgrades
volumes:
- './etc-pihole:/etc/pihole'
- './etc-dnsmasq.d:/etc/dnsmasq.d'
# https://github.com/pi-hole/docker-pi-hole#note-on-capabilities
cap_add:
- NET_ADMIN # Required if you are using Pi-hole as your DHCP server, else not needed
restart: unless-stopped
- Run
docker-compose up -d
to build and start pi-hole - Use the Pi-hole web UI to change the DNS settings Interface listening behavior to "Listen on all interfaces, permit all origins", if using Docker's default
bridge
network setting. (This can also be achieved by setting the environment variableDNSMASQ_LISTENING
toall
)
Here is an equivalent docker run script.
A Docker project to make a lightweight x86 and ARM container with Pi-hole functionality.
- Install docker for your x86-64 system or ARMv7 system using those links. Docker-compose is also recommended.
- Use the above quick start example, customize if desired.
- Enjoy!
This container uses 2 popular ports, port 53 and port 80, so may conflict with existing applications ports. If you have no other services or docker containers using port 53/80 (if you do, keep reading below for a reverse proxy example), the minimum arguments required to run this container are in the script docker_run.sh
If you're using a Red Hat based distribution with an SELinux Enforcing policy add :z
to line with volumes like so:
-v "$(pwd)/etc-pihole:/etc/pihole:z" \
-v "$(pwd)/etc-dnsmasq.d:/etc/dnsmasq.d:z" \
Volumes are recommended for persisting data across container re-creations for updating images. The IP lookup variables may not work for everyone, please review their values and hard code IP and IPv6 if necessary.
You can customize where to store persistent data by setting the PIHOLE_BASE
environment variable when invoking docker_run.sh
(e.g. PIHOLE_BASE=/opt/pihole-storage ./docker_run.sh
). If PIHOLE_BASE
is not set, files are stored in your current directory when you invoke the script.
Automatic Ad List Updates - since the 3.0+ release, cron
is baked into the container and will grab the newest versions of your lists and flush your logs. Set your TZ environment variable to make sure the midnight log rotation syncs up with your timezone's midnight.
There are multiple different ways to run DHCP from within your Docker Pi-hole container but it is slightly more advanced and one size does not fit all. DHCP and Docker's multiple network modes are covered in detail on our docs site: Docker DHCP and Network Modes
There are other environment variables if you want to customize various things inside the docker container:
Variable | Default | Value | Description |
---|---|---|---|
TZ |
UTC | <Timezone> |
Set your timezone to make sure logs rotate at local midnight instead of at UTC midnight. |
WEBPASSWORD |
random | <Admin password> |
http://pi.hole/admin password. Run docker logs pihole | grep random to find your random pass. |
FTLCONF_LOCAL_IPV4 |
unset | <Host's IP> |
Set to your server's LAN IP, used by web block modes and lighttpd bind address. |
Variable | Default | Value | Description |
---|---|---|---|
PIHOLE_DNS_ |
8.8.8.8;8.8.4.4 |
IPs delimited by ; |
Upstream DNS server(s) for Pi-hole to forward queries to, separated by a semicolon (supports non-standard ports with #[port number] ) e.g 127.0.0.1#5053;8.8.8.8;8.8.4.4 (supports Docker service names and links instead of IPs) e.g upstream0;upstream1 where upstream0 and upstream1 are the service names of or links to docker services Note: The existence of this environment variable assumes this as the sole management of upstream DNS. Upstream DNS added via the web interface will be overwritten on container restart/recreation |
DNSSEC |
false |
<"true"|"false"> |
Enable DNSSEC support |
DNS_BOGUS_PRIV |
true |
<"true"|"false"> |
Never forward reverse lookups for private ranges |
DNS_FQDN_REQUIRED |
true |
<"true"|"false"> |
Never forward non-FQDNs |
REV_SERVER |
false |
<"true"|"false"> |
Enable DNS conditional forwarding for device name resolution |
REV_SERVER_DOMAIN |
unset | Network Domain | If conditional forwarding is enabled, set the domain of the local network router |
REV_SERVER_TARGET |
unset | Router's IP | If conditional forwarding is enabled, set the IP of the local network router |
REV_SERVER_CIDR |
unset | Reverse DNS | If conditional forwarding is enabled, set the reverse DNS zone (e.g. 192.168.0.0/24 ) |
DHCP_ACTIVE |
false |
<"true"|"false"> |
Enable DHCP server. Static DHCP leases can be configured with a custom /etc/dnsmasq.d/04-pihole-static-dhcp.conf |
DHCP_START |
unset | <Start IP> |
Start of the range of IP addresses to hand out by the DHCP server (mandatory if DHCP server is enabled). |
DHCP_END |
unset | <End IP> |
End of the range of IP addresses to hand out by the DHCP server (mandatory if DHCP server is enabled). |
DHCP_ROUTER |
unset | <Router's IP> |
Router (gateway) IP address sent by the DHCP server (mandatory if DHCP server is enabled). |
DHCP_LEASETIME |
24 | <hours> |
DHCP lease time in hours. |
PIHOLE_DOMAIN |
lan |
<domain> |
Domain name sent by the DHCP server. |
DHCP_IPv6 |
false |
<"true"|"false"> |
Enable DHCP server IPv6 support (SLAAC + RA). |
DHCP_rapid_commit |
false |
<"true"|"false"> |
Enable DHCPv4 rapid commit (fast address assignment). |
VIRTUAL_HOST |
$FTLCONF_LOCAL_IPV4 |
<Custom Hostname> |
What your web server 'virtual host' is, accessing admin through this Hostname/IP allows you to make changes to the whitelist / blacklists in addition to the default 'http://pi.hole/admin/' address |
IPv6 |
true |
<"true"|"false"> |
For unraid compatibility, strips out all the IPv6 configuration from DNS/Web services when false. |
TEMPERATUREUNIT |
c |
<c|k|f> |
Set preferred temperature unit to c : Celsius, k : Kelvin, or f Fahrenheit units. |
WEBUIBOXEDLAYOUT |
boxed |
<boxed|traditional> |
Use boxed layout (helpful when working on large screens) |
QUERY_LOGGING |
true |
<"true"|"false"> |
Enable query logging or not. |
WEBTHEME |
default-light |
<"default-dark"|"default-darker"|"default-light"|"default-auto"|"lcars"> |
User interface theme to use. |
WEBPASSWORD_FILE |
unset | <Docker secret path> |
Set an Admin password using Docker secrets. If WEBPASSWORD is set, WEBPASSWORD_FILE is ignored. If WEBPASSWORD is empty, and WEBPASSWORD_FILE is set to a valid readable file path, then WEBPASSWORD will be set to the contents of WEBPASSWORD_FILE . |
Variable | Default | Value | Description |
---|---|---|---|
INTERFACE |
unset | <NIC> |
The default works fine with our basic example docker run commands. If you're trying to use DHCP with --net host mode then you may have to customize this or DNSMASQ_LISTENING. |
DNSMASQ_LISTENING |
unset | <local|all|single> |
local listens on all local subnets, all permits listening on internet origin subnets in addition to local, single listens only on the interface specified. |
WEB_PORT |
unset | <PORT> |
This will break the 'webpage blocked' functionality of Pi-hole however it may help advanced setups like those running synology or --net=host docker argument. This guide explains how to restore webpage blocked functionality using a linux router DNAT rule: Alternative Synology installation method |
SKIPGRAVITYONBOOT |
unset | <unset|1> |
Use this option to skip updating the Gravity Database when booting up the container. By default this environment variable is not set so the Gravity Database will be updated when the container starts up. Setting this environment variable to 1 (or anything) will cause the Gravity Database to not be updated when container starts up. |
CORS_HOSTS |
unset | <FQDNs delimited by ,> |
List of domains/subdomains on which CORS is allowed. Wildcards are not supported. Eg: CORS_HOSTS: domain.com,home.domain.com,www.domain.com . |
CUSTOM_CACHE_SIZE |
10000 |
Number | Set the cache size for dnsmasq. Useful for increasing the default cache size or to set it to 0. Note that when DNSSEC is "true", then this setting is ignored. |
FTL_CMD |
no-daemon |
no-daemon -- <dnsmasq option> |
Customize the options with which dnsmasq gets started. e.g. no-daemon -- --dns-forward-max 300 to increase max. number of concurrent dns queries on high load setups. |
FTLCONF_[SETTING] |
unset | As per documentation | Customize pihole-FTL.conf with settings described in the FTLDNS Configuration page. For example, to customize LOCAL_IPV4, ensure you have the FTLCONF_LOCAL_IPV4 environment variable set. |
Variable | Default | Value | Description |
---|---|---|---|
DNSMASQ_USER |
unset | <pihole|root> |
Allows changing the user that FTLDNS runs as. Default: pihole |
PIHOLE_UID |
999 |
Number | Overrides image's default pihole user id to match a host user id IMPORTANT: id must not already be in use inside the container! |
PIHOLE_GID |
999 |
Number | Overrides image's default pihole group id to match a host group id IMPORTANT: id must not already be in use inside the container! |
WEB_UID |
33 |
Number | Overrides image's default www-data user id to match a host user id IMPORTANT: id must not already be in use inside the container! (Make sure it is different to PIHOLE_UID if you are using that, also) |
WEB_GID |
33 |
Number | Overrides image's default www-data group id to match a host group id IMPORTANT: id must not already be in use inside the container! (Make sure it is different to PIHOLE_GID if you are using that, also) |
WEBLOGS_STDOUT |
0 | 0|1 | 0 logs to defined files, 1 redirect access and error logs to stdout |
While these may still work, they are likely to be removed in a future version. Where applicable, alternative variable names are indicated. Please review the table above for usage of the alternative variables
Docker Environment Var. | Description | Replaced By |
---|---|---|
CONDITIONAL_FORWARDING |
Enable DNS conditional forwarding for device name resolution | REV_SERVER |
CONDITIONAL_FORWARDING_IP |
If conditional forwarding is enabled, set the IP of the local network router | REV_SERVER_TARGET |
CONDITIONAL_FORWARDING_DOMAIN |
If conditional forwarding is enabled, set the domain of the local network router | REV_SERVER_DOMAIN |
CONDITIONAL_FORWARDING_REVERSE |
If conditional forwarding is enabled, set the reverse DNS of the local network router (e.g. 0.168.192.in-addr.arpa ) |
REV_SERVER_CIDR |
DNS1 |
Primary upstream DNS provider, default is google DNS | PIHOLE_DNS_ |
DNS2 |
Secondary upstream DNS provider, default is google DNS, no if only one DNS should used |
PIHOLE_DNS_ |
ServerIP |
Set to your server's LAN IP, used by web block modes and lighttpd bind address | FTLCONF_REPLY_ADDR4 |
ServerIPv6 |
If you have a v6 network set to your server's LAN IPv6 to block IPv6 ads fully | FTLCONF_REPLY_ADDR6 |
FTLCONF_REPLY_ADDR4 |
Set to your server's LAN IP, used by web block modes and lighttpd bind address | FTLCONF_LOCAL_IPV4 |
FTLCONF_REPLY_ADDR6 |
If you have a v6 network set to your server's LAN IPv6 to block IPv6 ads fully | FTLCONF_LOCAL_IPV6 |
To use these env vars in docker run format style them like: -e DNS1=1.1.1.1
Here is a rundown of other arguments for your docker-compose / docker run.
Docker Arguments | Description |
---|---|
-p <port>:<port> Recommended |
Ports to expose (53, 80, 67), the bare minimum ports required for Pi-holes HTTP and DNS services |
--restart=unless-stopped Recommended |
Automatically (re)start your Pi-hole on boot or in the event of a crash |
-v $(pwd)/etc-pihole:/etc/pihole Recommended |
Volumes for your Pi-hole configs help persist changes across docker image updates |
-v $(pwd)/etc-dnsmasq.d:/etc/dnsmasq.d Recommended |
Volumes for your dnsmasq configs help persist changes across docker image updates |
--net=host Optional |
Alternative to -p <port>:<port> arguments (Cannot be used at same time as -p) if you don't run any other web application. DHCP runs best with --net=host, otherwise your router must support dhcp-relay settings. |
--cap-add=NET_ADMIN Recommended |
Commonly added capability for DHCP, see Note on Capabilities below for other capabilities. |
--dns=127.0.0.1 Optional |
Sets your container's resolve settings to localhost so it can resolve DHCP hostnames from Pi-hole's DNSMasq, may fix resolution errors on container restart. |
--dns=1.1.1.1 Optional |
Sets a backup server of your choosing in case DNSMasq has problems starting |
--env-file .env Optional |
File to store environment variables for docker replacing -e key=value settings. Here for convenience |
- A good way to test things are working right is by loading this page: http://pi.hole/admin/
- How do I set or reset the Web interface Password?
docker exec -it pihole_container_name pihole -a -p
- then enter your password into the prompt
- Port conflicts? Stop your server's existing DNS / Web services.
- Don't forget to stop your services from auto-starting again after you reboot
- Ubuntu users see below for more detailed information
- You can map other ports to Pi-hole port 80 using docker's port forwarding like this
-p 8080:80
if you are using the default blocking mode. If you are using the legacy IP blocking mode, you should not remap this port.- Here is an example of running with nginxproxy/nginx-proxy (an nginx auto-configuring docker reverse proxy for docker) on my port 80 with Pi-hole on another port. Pi-hole needs to be
DEFAULT_HOST
env in nginxproxy/nginx-proxy and you need to set the matchingVIRTUAL_HOST
for the Pi-hole's container. Please read nginxproxy/nginx-proxy readme for more info if you have trouble.
- Here is an example of running with nginxproxy/nginx-proxy (an nginx auto-configuring docker reverse proxy for docker) on my port 80 with Pi-hole on another port. Pi-hole needs to be
- Docker's default network mode
bridge
isolates the container from the host's network. This is a more secure setting, but requires setting the Pi-hole DNS option for Interface listening behavior to "Listen on all interfaces, permit all origins".
Modern releases of Ubuntu (17.10+) and Fedora (33+) include systemd-resolved
which is configured by default to implement a caching DNS stub resolver. This will prevent pi-hole from listening on port 53.
The stub resolver should be disabled with: sudo sed -r -i.orig 's/#?DNSStubListener=yes/DNSStubListener=no/g' /etc/systemd/resolved.conf
This will not change the nameserver settings, which point to the stub resolver thus preventing DNS resolution. Change the /etc/resolv.conf
symlink to point to /run/systemd/resolve/resolv.conf
, which is automatically updated to follow the system's netplan
:
sudo sh -c 'rm /etc/resolv.conf && ln -s /run/systemd/resolve/resolv.conf /etc/resolv.conf'
After making these changes, you should restart systemd-resolved using systemctl restart systemd-resolved
Once pi-hole is installed, you'll want to configure your clients to use it (see here). If you used the symlink above, your docker host will either use whatever is served by DHCP, or whatever static setting you've configured. If you want to explicitly set your docker host's nameservers you can edit the netplan(s) found at /etc/netplan
, then run sudo netplan apply
.
Example netplan:
network:
ethernets:
ens160:
dhcp4: true
dhcp4-overrides:
use-dns: false
nameservers:
addresses: [127.0.0.1]
version: 2
Note that it is also possible to disable systemd-resolved
entirely. However, this can cause problems with name resolution in vpns (see bug report). It also disables the functionality of netplan since systemd-resolved is used as the default renderer (see man netplan
). If you choose to disable the service, you will need to manually set the nameservers, for example by creating a new /etc/resolv.conf
.
Users of older Ubuntu releases (circa 17.04) will need to disable dnsmasq.
@Rikj000 has produced a guide to assist users installing Pi-hole on Dokku
The primary docker tags are explained in the following table. Click here to see the full list of tags. See GitHub Release notes to see the specific version of Pi-hole Core, Web, and FTL included in the release.
tag | description |
---|---|
latest |
Always latest release |
2022.04 |
Date-based release that can receive bugfix updates |
2022.04.1 |
A specific image that will not receive updates |
dev |
Similar to latest , but for the development branch (pushed occasionally) |
*beta |
Early beta releases of upcoming versions - here be dragons |
nightly |
Like dev but pushed every night and pulls from the latest development branches of the core Pi-hole components (Pi-hole, AdminLTE, FTL) |
The standard Pi-hole customization abilities apply to this docker, but with docker twists such as using docker volume mounts to map host stored file configurations over the container defaults. However, mounting these configuration files as read-only should be avoided. Volumes are also important to persist the configuration in case you have removed the Pi-hole container which is a typical docker upgrade pattern.
Do not attempt to upgrade (pihole -up
) or reconfigure (pihole -r
). New images will be released for upgrades, upgrading by replacing your old container with a fresh upgraded image is the 'docker way'. Long-living docker containers are not the docker way since they aim to be portable and reproducible, why not re-create them often! Just to prove you can.
- Read the release notes for both this Docker release and the Pi-hole release
- This will help you avoid common problems due to any known issues with upgrading or newly required arguments or variables
- We will try to put common break/fixes at the top of this readme too
- Download the latest version of the image:
docker pull pihole/pihole
- Throw away your container:
docker rm -f pihole
- Warning When removing your pihole container you may be stuck without DNS until step 3; docker pull before docker rm -f to avoid DNS interruption OR always have a fallback DNS server configured in DHCP to avoid this problem altogether.
- If you care about your data (logs/customizations), make sure you have it volume-mapped or it will be deleted in this step.
- Start your container with the newer base image:
docker run <args> pihole/pihole
(<args>
being your preferred run volumes and env vars)
Why is this style of upgrading good? A couple reasons: Everyone is starting from the same base image which has been tested to known it works. No worrying about upgrading from A to B, B to C, or A to C is required when rolling out updates, it reduces complexity, and simply allows a 'fresh start' every time while preserving customizations with volumes. Basically I'm encouraging phoenix server principles for your containers.
To reconfigure Pi-hole you'll either need to use an existing container environment variables or if there is no a variable for what you need, use the web UI or CLI commands.
Here are some relevant wiki pages from Pi-hole's documentation. The web interface or command line tools can be used to implement changes to pihole.
We install all pihole utilities so the the built in pihole commands will work via docker exec <container> <command>
like so:
docker exec pihole_container_name pihole updateGravity
docker exec pihole_container_name pihole -w spclient.wg.spotify.com
docker exec pihole_container_name pihole -wild example.com
The webserver and DNS service inside the container can be customized if necessary. Any configuration files you volume mount into /etc/dnsmasq.d/
will be loaded by dnsmasq when the container starts or restarts or if you need to modify the Pi-hole config it is located at /etc/dnsmasq.d/01-pihole.conf
. The docker start scripts runs a config test prior to starting so it will tell you about any errors in the docker log.
Similarly for the webserver you can customize configs in /etc/lighttpd
As long as your docker system service auto starts on boot and you run your container with --restart=unless-stopped
your container should always start on boot and restart on crashes. If you prefer to have your docker container run as a systemd service instead, add the file pihole.service to "/etc/systemd/system"; customize whatever your container name is and remove --restart=unless-stopped
from your docker run. Then after you have initially created the docker container using the docker run command above, you can control it with "systemctl start pihole" or "systemctl stop pihole" (instead of docker start
/docker stop
). You can also enable it to auto-start on boot with "systemctl enable pihole" (as opposed to --restart=unless-stopped
and making sure docker service auto-starts on boot).
NOTE: After initial run you may need to manually stop the docker container with "docker stop pihole" before the systemctl can start controlling the container.
DNSMasq / FTLDNS expects to have the following capabilities available:
CAP_NET_BIND_SERVICE
: Allows FTLDNS binding to TCP/UDP sockets below 1024 (specifically DNS service on port 53)CAP_NET_RAW
: use raw and packet sockets (needed for handling DHCPv6 requests, and verifying that an IP is not in use before leasing it)CAP_NET_ADMIN
: modify routing tables and other network-related operations (in particular inserting an entry in the neighbor table to answer DHCP requests using unicast packets)CAP_SYS_NICE
: FTL sets itself as an important process to get some more processing time if the latter is running lowCAP_CHOWN
: we need to be able to change ownership of log files and databases in case FTL is started as a different user thanpihole
This image automatically grants those capabilities, if available, to the FTLDNS process, even when run as non-root.
By default, docker does not include the NET_ADMIN
capability for non-privileged containers, and it is recommended to explicitly add it to the container using --cap-add=NET_ADMIN
.
However, if DHCP and IPv6 Router Advertisements are not in use, it should be safe to skip it. For the most paranoid, it should even be possible to explicitly drop the NET_RAW
capability to prevent FTLDNS from automatically gaining it.
We have noticed that a lot of people use Watchtower to keep their Pi-hole containers up to date. For the same reason we don't provide an auto-update feature on a bare metal install, you should not have a system automatically update your Pi-hole container. Especially unattended. As much as we try to ensure nothing will go wrong, sometimes things do go wrong - and you need to set aside time to manually pull and update to the version of the container you wish to run. The upgrade process should be along the lines of:
- Important: Read the release notes. Sometimes you will need to make changes other than just updating the image
- Pull the new image
- Stop and remove the running Pi-hole container
- If you care about your data (logs/customizations), make sure you have it volume-mapped or it will be deleted in this step.
- Recreate the container using the new image
Pi-hole is an integral part of your network, don't let it fall over because of an unattended update in the middle of the night.
Please report issues on the GitHub project when you suspect something docker related. Pi-hole or general docker questions are best answered on our user forums.