Download the latest Total Replay II disk image at the archive.org home page if you just want to play Apple II sports games. The rest of this page is for developers who want to work with the source code and assemble it themselves.
You will need
As of this writing, all of the non-Xcode programs are installable via Homebrew.
$ brew tap lifepillar/appleii
$ brew install acme parallel mach-kernel-cadiusThen open a terminal window and type
$ cd 4sports/
$ makeIf all goes well, the build/ subdirectory will contain a 4sports.hdv image which can be mounted in emulators like OpenEmulator, Ample, or Virtual II.
If all does not go well, try doing a clean build (make clean dsk)
If that fails, perhaps you have out-of-date versions of one of the required tools? The Makefile lists, but does not enforce, the minimum version requirements of each third-party tool.
If that fails, please file a bug.
You will need
(Those tools will need to be added to your command-line PATH.)
Then open a CMD.EXE window and type
C:\> cd 4sports
C:\4sports> winmake dsk
If all goes well, the build\ subdirectory will contain a 4sports.hdv image which can be mounted in emulators like AppleWin or MAME.
If all does not go well, try doing a clean build (winmake clean, winmake dsk)
If that fails, perhaps you have out-of-date versions of one of the required tools? The winmake lists, but does not enforce, the minimum version requirements of each third-party tool.
If that fails, please file a bug.
You will need
Most of the packages are already available pre-compiled and can be installed with the following
$ sudo apt-get install git parallel acmeTo compile Cadius enter the following
$ git clone https://github.com/mach-kernel/cadius.git
$ cd cadius
$ make
$ cd bin/release
$ sudo cp cadius /usr/binThen open a terminal window and type
$ git clone https://github.com/a2-4am/4sports.git
$ cd 4sports/
$ makeIf all goes well, the build/ subdirectory will contain a 4sports.hdv image which can be mounted in emulators like MAME.
If all does not go well, try doing a clean build (make clean dsk)
If that fails, perhaps you have out-of-date versions of one of the required tools? The winmake lists, but does not enforce, the minimum version requirements of each third-party tool.
If that fails, please file a bug.
4cade.a is the main assembler target. It builds the launcher itself. Launcher code is split into code that can be run once from main memory then discarded, and code which is relocated to the language card and persists throughout the lifetime of the launcher. As the language card is only 16KB and will also need to store some persistent data structures, memory is precious and tightly managed.
4cade.init.a contains the code that is run once at program startup. First, we do some hardware detection, like how much memory you have, whether you have a joystick, and whether you have a IIgs. Then we relocate selected code to the language card and load the appropriate search index. (For example, if you do not have a joystick, games that require a joystick will not appear in search results.) constants.a has a rough map of what ends up where, within the language card and its overlapping memory regions. Then we load and parse the global preferences file (PREFS.CONF) and store the results in the language card. Finally, we jump to the main entry point (Reenter). The launcher is initialized; anything left in main memory is discarded.
There are three major modes in the launcher: search mode, browse mode, and mega-attract mode. Search mode is the default, and it is always the first mode you enter when launching the program. ui.search.mode.a tracks your keystrokes to determine the best match within the game list for the keys you have typed, then loads the game's title screenshot and displays the game name and other information at the bottom of the screen. If you have not yet typed any keys, it displays the title page and welcome message instead. The InputKeys table documents all other recognized keys.
The text ranking algorithm is in textrank.a. It was inspired by Quicksilver but is an independent implementation.
The user enters browse mode by pressing the right or down arrow key. ui.browse.mode.a then watches for other arrow keys and displays the next or previous game in the game list. The BrowseKeys table documents all other recognized keys.
If the user presses Esc from any other mode, or does not type anything for 30 seconds, the launcher goes into Mega-Attract mode, a.k.a. screensaver mode. ui.attract.mode.a manages loading and executing attract mode modules. An attract mode module can be a short slideshow, a self-running demo, or just a single screenshot. Modules are listed in ATTRACT.CONF and are run in order until end-of-file, then it starts over from the beginning. The entire cycle is quite long (several hours), and some screenshots appear in multiple slideshows, but there is no actual randomness in selecting the next attract mode module.
GAMES.CONF is the master games list. It contains 1 record for every game in Total Replay. However, not every game is playable on every device, so each record also contains metadata, e.g. "this game requires a joystick," or "this game requires 128K," or "this game has a double hi-res title screen" (which is not identical to "this game requires 128K").
The format of the GAMES.CONF file has changed as new requirements have appeared, and it may change again in the future. There is up-to-date format information in comments in the file itself, which I will not duplicate here. However, in general, each record is 1 line and contains the name and flags for 1 game. The file is parsed during build and used to create the search indexes and other files which are stored on the final disk image.
Each game's filename is used as a "foreign key" (in database terms) to build directory paths, to locate files in subdirectories, and to reference the game in other configuration files.
- A game's main executable is always
X/FILENAME/FILENAME - A game's HGR title screenshot is always
TITLE.HGR/FILENAME - A game's super hi-res box art is always
ARTWORK.SHR/FILENAME(not all games have artwork) - A games's help page is always
GAMEHELP/FILENAME(not all games have help) - A game's mini-attract mode configuration file is always
ATTRACT/FILENAME - Games are included in other attract mode configuration files by
FILENAME - The source disk image of a game (in
res/dsk) must have a volume name ofFILENAME, and there must be a file in the disk image's root directory also namedFILENAMEwhich is the game's main executable
ATTRACT.CONF is the master configuration file for Mega-Attract mode. There is up-to-date format information in comments in the file itself, which I will not duplicate here. In general, each record is the name of an attract module, which can be a slideshow, self-running demo, or even a single screenshot. Each attract module corresponds to a file in a separate directory; see format information for details. So the record FAVORITES.CONF=1 corresponds to a real file that contains details about that particular hi-res slideshow. ATTRACT.CONF and the linked slideshow configuration files are parsed at build time and stored in a custom format on the final disk image.
Attract modules are loosely divided into sets that have a loosely similar mix of hi-res, double hi-res, super hi-res, and self-running demos. The ATTRACT.CONF file is maintained by hand and changes frequently as we add games, split up slideshows, or reorder things on a whim.
Since everything is so loosely associated by filename, it is easy to end up with attract modules that aren't listed in ATTRACT.CONF (will use disk space but never run), duplicate modules (will loop incorrectly), or modules that refer to non-existent files (will crash and burn). If you make any changes to ATTRACT.CONF or any of the files that it references, or any of the files that those files reference, or even sneeze in their general direction, you should run the attract mode consistency check:
$ cd 4sports/
$ make attractFX.CONF and its sister DFX.CONF list the HGR and DHGR transition effects used in hi-res and double hi-res slideshows. Each record is a filename of a transition effect file, which is an executable file assembled at build time and stored on final disk image in a custom format. At the beginning of each slideshow, we query the global preferences to find the filename of the FX or DFX file, then update the global preferences with the next filename (wrapping around to the beginning of the list). If you watch the Mega-Attract mode long enough, you will eventually see all the transition effects, and since the cycle of transition effects is separate from the cycle of slideshows, you will eventually see the same slideshow with different transition effects.
These files are parsed at build time and stored on the final disk image in a binary format, then read from disk every time they are needed. Due to memory restrictions, the parsed data is not persisted.
PREFS.CONF contains persistent global state, including Mega-Attract mode state and whether cheats are enabled. There is up-to-date format information in comments in the file itself.
This file is read and parsed once at program startup, and the parsed data is stored persistently in the language card. It is written to disk every time global state changes, which is often during Mega-Attract mode, or if the user toggles cheat mode.
Many files in Total Replay are stored in a compressed format, then decompressed at run-time. The compression and decompression is handled by Exomizer, which targets 8-bit platforms. Compressed files include
Both the compressed and uncompressed files are stored in the repository, so you do not need Exomizer installed to build Total Replay. You only need it if you add new graphics.
To add a new compressed graphic file, add the uncompressed original file to the appropriate directory (ACTION.HGR.UNCOMPRESSED, ACTION.DHGR.UNCOMPRESSED, or ARTWORK.SHR.UNCOMPRESSED respectively), then run
$ cd 4sports/
$ make compressThen add and commit the compressed files to the repository.
