Skip to content

WonderMoose/apple_tv_mrp

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 

Repository files navigation

Home Assistant Apple TV using MediaRemoteTV Protocol (MRP)

This is an update to the built-in Home Assistant Apple TV component which uses a updated pyatv version which is based on the MediaRemoteTV protocol (MRP). This protocol is necessary in order to support Apple TVs moving forward. A fair amount of changes are necessary in order to support this:

  1. pyatv is not very active anymore. I had to do a bunch of work because they haven't released the latest code on PyPI, so I couldn't import it in normal ways.

  2. Interfacing with the latest pyatv code takes a bunch of updates. That should all be working in this repository.

  3. The MRP repository doesn't seem to work with Home Sharing, so it always needs a pin. I made that happen.

You should be able to install this component as a custom component alongside the normal one using HACS or manually. The only difference in configuration is that the instead of login_id, port is now necessary. And the domain is apple_tv_mrp.

Your credentials from the previous version will not work. You will need to re-authenticate using the apple_tv_mrp_authenticate service.

Full steps

  1. Install using HACS or manually to custom_components folder

  2. Add the apple_tv_mrp component to your configuration with no further configuration:

apple_tv_mrp:
  1. Run the apple_tv_mrp.apple_tv_mrp_scan service and locate the notification. Copy the results elsewhere.

Scan Results

  1. One at a time, add an entry to your configuration like so, using the values from your scan:
apple_tv_mrp:
  - name: Bedroom Apple TV
    host: 10.0.0.6
    port: 49154
  1. After adding each value, restart Home Assistant and a new entity will be added, but it won't work!

  2. Run the apple_tv_mrp.apple_tv_mrp_authenticate service with the entity_id of the new media_player entity. Your Apple TV will show a PIN on it:

Apple TV PIN

  1. Open the notification which is asking you to configure you Apple TV and enter the PIN

Enter PIN

  1. You will get another notification that has the credentials. Note: the text will be longer than the notification can display! It is four segments long, separated by colons. You must select all the text. Triple-clicking is normally sufficient

Credential Notification

  1. Add the credential to your config and restart Home Assistant.
apple_tv_mrp:
  - name: Bedroom Apple Tv
    host: 10.0.0.6
    port: 49154
    credentials: 99c702572cb521018274f7136aeeefb8e57dd06cc71cff634752664ecc65f920:6db44955cae5b8ea00cc8094243fbde99e1ebdca7ccebffac7fa08b5b69c7de6:31383466663663312d653362612d343635662d613734632d386462633965306534346665:35343030303232362d326531382d343964382d613039392d383331316232613131386536
  1. You should now have a working media_player and remote entity.

  2. Repeat steps 4 - 10 for each Apple TV. Do not re-scan! Use your original scan results!

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages