Z2 touchscreen fixes and t81120-j493 support #1

jannau · 2023-06-17T11:00:11Z

Feel free to replace the usleep_range after and before the cs-gpio toggling with spi-cs-setup-delay-ns/spi-cs-hold-delay-ns device node properties

Add bindings for touchscreen controllers attached using the Z2 protocol. Those are present in most Apple devices. Signed-off-by: Sasha Finkelstein <[email protected]>

Adds a driver for Apple touchscreens using the Z2 protocol. Signed-off-by: Sasha Finkelstein <[email protected]>

Adds device tree entries for the touchbar digitizer Signed-off-by: Sasha Finkelstein <[email protected]>

Add the MAINTAINERS entries for the driver Signed-off-by: Sasha Finkelstein <[email protected]>

Signed-off-by: Janne Grunau <[email protected]>

Make make "cs-gpios" optional as it is not required on t8112-j493. Signed-off-by: Janne Grunau <[email protected]>

reset spi transfer, fixes invalid pointers in apple_spi_transfer_one() Signed-off-by: Janne Grunau <[email protected]>

handle timed out boot completion as error Signed-off-by: Janne Grunau <[email protected]>

add "j493-touchbar" spi device id Signed-off-by: Janne Grunau <[email protected]>

Signed-off-by: Janne Grunau <[email protected]>

WhatAmISupposedToPutHere · 2023-06-17T12:03:54Z

Merged manually, thanks.

[ Upstream commit 47d40d9 ] With the latest Linux-6.11-rc3, the below NULL pointer crash is observed when SBI PMU snapshot is enabled for the guest and the guest is forcefully powered-off. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508 Oops [#1] Modules linked in: kvm CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3 Hardware name: riscv-virtio,qemu (DT) epc : __kvm_write_guest_page+0x94/0xa6 [kvm] ra : __kvm_write_guest_page+0x54/0xa6 [kvm] epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0 gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000 t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0 s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086 a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0 a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000 s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000 s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001 s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3 t5 : ffffffff814126e0 t6 : ffffffff81412700 status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d [<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm] [<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm] [<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm] [<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm] [<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm] [<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm] [<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm] [<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm] [<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm] [<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm] [<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm] Clearly, the kvm_vcpu_write_guest() function is crashing because it is being called from kvm_pmu_clear_snapshot_area() upon guest tear down. To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because the guest is anyway being tore down. The kvm_pmu_clear_snapshot_area() is also called when guest changes PMU snapshot area of a VCPU but even in this case the previous PMU snaphsot area must not be zeroed-out because the guest might have reclaimed the pervious PMU snapshot area for some other purpose. Fixes: c2f41dd ("RISC-V: KVM: Implement SBI PMU Snapshot feature") Signed-off-by: Anup Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 89a906d ] Floating point instructions in userspace can crash some arm kernels built with clang/LLD 17.0.6: BUG: unsupported FP instruction in kernel mode FPEXC == 0xc0000780 Internal error: Oops - undefined instruction: 0 [#1] ARM CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1 Hardware name: BCM2835 PC is at vfp_support_entry+0xc8/0x2cc LR is at do_undefinstr+0xa8/0x250 pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013 sp : dc8d1f68 ip : 60000013 fp : bedea19c r10: ec532b17 r9 : 00000010 r8 : 0044766c r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0 r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 0251c008 DAC: 00000051 Register r0 information: non-paged memory Register r1 information: vmalloc memory Register r2 information: non-slab/vmalloc memory Register r3 information: non-slab/vmalloc memory Register r4 information: 2-page vmalloc region Register r5 information: slab kmalloc-cg-2k Register r6 information: vmalloc memory Register r7 information: non-slab/vmalloc memory Register r8 information: non-paged memory Register r9 information: zero-size pointer Register r10 information: vmalloc memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b) Stack: (0xdc8d1f68 to 0xdc8d2000) 1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0 1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010 1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000 Call trace: [<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250) [<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80) Exception stack(0xdc8d1fb0 to 0xdc8d1ff8) 1fa0: b6f68af8 00448fc0 00000000 bedea188 1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c 1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is a minimal userspace reproducer on a Raspberry Pi Zero W: #include <stdio.h> #include <math.h> int main(void) { double v = 1.0; printf("%fn", NAN + *(volatile double *)&v); return 0; } Another way to consistently trigger the oops is: calvin@raspberry-pi-zero-w ~$ python -c "import json" The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n, because the pr_debug() calls act as barriers even when not activated. This is the output from the same kernel source built with the same compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as expected: VFP: bounce: trigger ec532b17 fpexc c0000780 VFP: emulate: INST=0xee377b06 SCR=0x00000000 VFP: bounce: trigger eef1fa10 fpexc c0000780 VFP: emulate: INST=0xeeb40b40 SCR=0x00000000 VFP: raising exceptions 30000000 calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer nan Crudely grepping for vmsr/vmrs instructions in the otherwise nearly idential text for vfp_support_entry() makes the problem obvious: vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0 vmlinux.llvm.good [0xc0101d20] <+152>: vmsr fpexc, r7 vmlinux.llvm.good [0xc0101d38] <+176>: vmrs r4, fpexc vmlinux.llvm.good [0xc0101d6c] <+228>: vmrs r0, fpscr vmlinux.llvm.good [0xc0101dc4] <+316>: vmsr fpexc, r0 vmlinux.llvm.good [0xc0101dc8] <+320>: vmrs r0, fpsid vmlinux.llvm.good [0xc0101dcc] <+324>: vmrs r6, fpscr vmlinux.llvm.good [0xc0101e10] <+392>: vmrs r10, fpinst vmlinux.llvm.good [0xc0101eb8] <+560>: vmrs r10, fpinst2 vmlinux.llvm.bad [0xc0101cb8] <+48>: vmrs r7, fpexc vmlinux.llvm.bad [0xc0101cd8] <+80>: vmsr fpexc, r0 vmlinux.llvm.bad [0xc0101d20] <+152>: vmsr fpexc, r7 vmlinux.llvm.bad [0xc0101d30] <+168>: vmrs r0, fpscr vmlinux.llvm.bad [0xc0101d50] <+200>: vmrs r6, fpscr <== BOOM! vmlinux.llvm.bad [0xc0101d6c] <+228>: vmsr fpexc, r0 vmlinux.llvm.bad [0xc0101d70] <+232>: vmrs r0, fpsid vmlinux.llvm.bad [0xc0101da4] <+284>: vmrs r10, fpinst vmlinux.llvm.bad [0xc0101df8] <+368>: vmrs r4, fpexc vmlinux.llvm.bad [0xc0101e5c] <+468>: vmrs r10, fpinst2 I think LLVM's reordering is valid as the code is currently written: the compiler doesn't know the instructions have side effects in hardware. Fix by using "asm volatile" in fmxr() and fmrx(), so they cannot be reordered with respect to each other. The original compiler now produces working kernels on my hardware with DYNAMIC_DEBUG=n. This is the relevant piece of the diff of the vfp_support_entry() text, from the original oopsing kernel to a working kernel with this patch: vmrs r0, fpscr tst r0, #4096 bne 0xc0101d48 tst r0, #458752 beq 0xc0101ecc orr r7, r7, #536870912 ldr r0, [r4, #0x3c] mov r9, AsahiLinux#16 -vmrs r6, fpscr orr r9, r9, #251658240 add r0, r0, #4 str r0, [r4, #0x3c] mvn r0, AsahiLinux#159 sub r0, r0, #-1207959552 and r0, r7, r0 vmsr fpexc, r0 vmrs r0, fpsid +vmrs r6, fpscr and r0, r0, #983040 cmp r0, #65536 bne 0xc0101d88 Fixes: 4708fb0 ("ARM: vfp: Reimplement VFP exception entry in C code") Signed-off-by: Calvin Owens <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 862bf7c ] mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit 0335c03 ("wifi: mt76: fix race condition related to checking tx queue fill status") introduced a dereference of the phys array indirectly indexed by band_idx via wcid->phy_idx in mt76_wcid_cleanup(). This caused the following Oops on affected mt7986 devices: Unable to handle kernel read from unreadable memory at virtual address 0000000000000024 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000 [0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ... CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0 Hardware name: ZyXEL EX5700 (Telenor) (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mt76_wcid_cleanup+0x84/0x22c [mt76] lr : mt76_wcid_cleanup+0x64/0x22c [mt76] sp : ffffffc00a803700 x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00 x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001 x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8 x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000 x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0 x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000 x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28 x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000 x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024 Call trace: mt76_wcid_cleanup+0x84/0x22c [mt76] __mt76_sta_remove+0x70/0xbc [mt76] mt76_sta_state+0x8c/0x1a4 [mt76] mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e] drv_sta_state+0x144/0x274 [mac80211] sta_info_move_state+0x1cc/0x2a4 [mac80211] sta_set_sinfo+0xaf8/0xc24 [mac80211] sta_info_destroy_addr_bss+0x4c/0x6c [mac80211] ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211] cfg80211_check_station_change+0x1360/0x4710 [cfg80211] genl_family_rcv_msg_doit+0xb4/0x110 genl_rcv_msg+0xd0/0x1bc netlink_rcv_skb+0x58/0x120 genl_rcv+0x34/0x50 netlink_unicast+0x1f0/0x2ec netlink_sendmsg+0x198/0x3d0 ____sys_sendmsg+0x1b0/0x210 ___sys_sendmsg+0x80/0xf0 __sys_sendmsg+0x44/0xa0 __arm64_sys_sendmsg+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x40/0xd0 el0_svc+0x14/0x4c el0t_64_sync_handler+0x100/0x110 el0t_64_sync+0x15c/0x160 Code: d2800002 910092c0 52800023 f9800011 (885f7c01) ---[ end trace 7e42dd9a39ed2281 ]--- Fix by using mt76_dev_phy() which will map band_idx to the correct phy for all hardware combinations. Fixes: 0335c03 ("wifi: mt76: fix race condition related to checking tx queue fill status") Link: openwrt/openwrt#14548 Signed-off-by: Bjørn Mork <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 04ccecf ] Blamed commit accidentally removed a check for rt->rt6i_idev being NULL, as spotted by syzbot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> addrconf_ifdown+0x15d/0x1bd0 net/ipv6/addrconf.c:3856 addrconf_notify+0x3cb/0x1020 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] unregister_netdevice_many_notify+0xd81/0x1c40 net/core/dev.c:11352 unregister_netdevice_many net/core/dev.c:11414 [inline] unregister_netdevice_queue+0x303/0x370 net/core/dev.c:11289 unregister_netdevice include/linux/netdevice.h:3129 [inline] __tun_detach+0x6b9/0x1600 drivers/net/tun.c:685 tun_detach drivers/net/tun.c:701 [inline] tun_chr_close+0x108/0x1b0 drivers/net/tun.c:3510 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1acc77def9 Code: Unable to access opcode bytes at 0x7f1acc77decf. RSP: 002b:00007ffeb26fa738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1acc77def9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000043 RBP: 00007f1acc7dd508 R08: 00007ffeb26f84d7 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000003 R14: 00000000ffffffff R15: 00007ffeb26fa8e0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline] RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914 Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06 RSP: 0018:ffffc900047374e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0 RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18 R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930 FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: e332bc6 ("ipv6: Don't call with rt6_uncached_list_flush_dev") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: David Ahern <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1a0bd28 ] Case #1: SQLite App GC Thread Kworker Shrinker - f2fs_ioc_start_atomic_write - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - filemap_write_and_wait_range : write atomic_file's data to cow_inode echo 3 > drop_caches to drop atomic_file's cache. - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_down_write(&fi->i_gc_rwsem[WRITE]) - __f2fs_commit_atomic_write - f2fs_up_write(&fi->i_gc_rwsem[WRITE]) Case #2: SQLite App GC Thread Kworker - f2fs_ioc_start_atomic_write - __writeback_single_inode - do_writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page : write atomic_file's data to cow_inode - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_ioc_commit_atomic_write In above cases racing in between atomic_write and GC, previous data in atomic_file may be overwrited to cow_file, result in data corruption. This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private, and use it to indicate that there is last dirty data in atomic file, and the data should be writebacked into cow_file, if the flag is not tagged in page, we should never write data across files. Fixes: 3db1de0 ("f2fs: change the current atomic write way") Cc: Daeho Jeong <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 18ec12c ] Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 AsahiLinux#295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception Fixes: 85d2b0a ("module: don't ignore sysfs_create_link() failures") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dc12502 ] Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr resources which never got initialized in the first place. This patch adds the missing check in mlx5_vdpa_destroy_mr_resources() to block releasing non-initialized mr resources. Reference trace: mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned? BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 140216067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] Code: [...] RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246 RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000 RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670 R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000 R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] ? __die_body.cold+0x8/0xd ? page_fault_oops+0x134/0x170 ? __irq_work_queue_local+0x2b/0xc0 ? irq_work_queue+0x2c/0x50 ? exc_page_fault+0x62/0x150 ? asm_exc_page_fault+0x22/0x30 ? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa] ? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd9/0x130 genl_family_rcv_msg+0x14d/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] ? _copy_to_user+0x1a/0x30 ? move_addr_to_user+0x4b/0xe0 genl_rcv_msg+0x47/0xa0 ? __import_iovec+0x46/0x150 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x245/0x370 netlink_sendmsg+0x206/0x440 __sys_sendto+0x1dc/0x1f0 ? do_read_fault+0x10c/0x1d0 ? do_pte_missing+0x10d/0x190 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x5c/0xf0 ? __count_memcg_events+0x4f/0xb0 ? mm_account_fault+0x6c/0x100 ? handle_mm_fault+0x116/0x270 ? do_user_addr_fault+0x1d6/0x6a0 ? do_syscall_64+0x6b/0xf0 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 entry_SYSCALL_64_after_hwframe+0x78/0x80 Fixes: 512c0cd ("vdpa/mlx5: Decouple cvq iotlb handling from hw mapping code") Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Si-Wei Liu <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c8770db ] We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic AsahiLinux#193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_event+0x21/0x30 Jul 26 15:05:02 rx [11061396.021984] ? clockevents_program_event+0x8f/0xe0 Jul 26 15:05:02 rx [11061396.027035] run_timer_softirq+0x2a/0x50 Jul 26 15:05:02 rx [11061396.031212] __do_softirq+0xd1/0x2c1 Jul 26 15:05:02 rx [11061396.035044] do_softirq_own_stack+0x2a/0x40 Jul 26 15:05:02 rx [11061396.039480] Jul 26 15:05:02 rx [11061396.041840] do_softirq.part.0+0x46/0x50 Jul 26 15:05:02 rx [11061396.046022] __local_bh_enable_ip+0x50/0x60 Jul 26 15:05:02 rx [11061396.050460] _raw_spin_unlock_bh+0x1e/0x20 Jul 26 15:05:02 rx [11061396.054817] nf_conntrack_tcp_packet+0x29e/0xbe0 [nf_conntrack] Jul 26 15:05:02 rx [11061396.060994] ? get_l4proto+0xe7/0x190 [nf_conntrack] Jul 26 15:05:02 rx [11061396.066220] nf_conntrack_in+0xe9/0x670 [nf_conntrack] Jul 26 15:05:02 rx [11061396.071618] ipv6_conntrack_local+0x14/0x20 [nf_conntrack] Jul 26 15:05:02 rx [11061396.077356] nf_hook_slow+0x45/0xb0 Jul 26 15:05:02 rx [11061396.081098] ip6_xmit+0x3f0/0x5d0 Jul 26 15:05:02 rx [11061396.084670] ? ipv6_anycast_cleanup+0x50/0x50 Jul 26 15:05:02 rx [11061396.089282] ? __sk_dst_check+0x38/0x70 Jul 26 15:05:02 rx [11061396.093381] ? inet6_csk_route_socket+0x13b/0x200 Jul 26 15:05:02 rx [11061396.098346] inet6_csk_xmit+0xa7/0xf0 Jul 26 15:05:02 rx [11061396.102263] __tcp_transmit_skb+0x550/0xb30 Jul 26 15:05:02 rx [11061396.106701] tcp_write_xmit+0x3c6/0xc20 Jul 26 15:05:02 rx [11061396.110792] ? __alloc_skb+0x98/0x1d0 Jul 26 15:05:02 rx [11061396.114708] __tcp_push_pending_frames+0x37/0x100 Jul 26 15:05:02 rx [11061396.119667] tcp_push+0xfd/0x100 Jul 26 15:05:02 rx [11061396.123150] tcp_sendmsg_locked+0xc70/0xdd0 Jul 26 15:05:02 rx [11061396.127588] tcp_sendmsg+0x2d/0x50 Jul 26 15:05:02 rx [11061396.131245] inet6_sendmsg+0x43/0x70 Jul 26 15:05:02 rx [11061396.135075] __sock_sendmsg+0x48/0x70 Jul 26 15:05:02 rx [11061396.138994] ____sys_sendmsg+0x212/0x280 Jul 26 15:05:02 rx [11061396.143172] ___sys_sendmsg+0x88/0xd0 Jul 26 15:05:02 rx [11061396.147098] ? __seccomp_filter+0x7e/0x6b0 Jul 26 15:05:02 rx [11061396.151446] ? __switch_to+0x39c/0x460 Jul 26 15:05:02 rx [11061396.155453] ? __switch_to_asm+0x42/0x80 Jul 26 15:05:02 rx [11061396.159636] ? __switch_to_asm+0x5a/0x80 Jul 26 15:05:02 rx [11061396.163816] __sys_sendmsg+0x5c/0xa0 Jul 26 15:05:02 rx [11061396.167647] __x64_sys_sendmsg+0x1f/0x30 Jul 26 15:05:02 rx [11061396.171832] do_syscall_64+0x57/0x190 Jul 26 15:05:02 rx [11061396.175748] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Jul 26 15:05:02 rx [11061396.181055] RIP: 0033:0x7f1ef692618d Jul 26 15:05:02 rx [11061396.184893] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 Jul 26 15:05:02 rx [11061396.203889] RSP: 002b:00007f1ef4a26aa0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e Jul 26 15:05:02 rx [11061396.211708] RAX: ffffffffffffffda RBX: 000000000000084b RCX: 00007f1ef692618d Jul 26 15:05:02 rx [11061396.219091] RDX: 0000000000004000 RSI: 00007f1ef4a26b10 RDI: 0000000000000275 Jul 26 15:05:02 rx [11061396.226475] RBP: 0000000000004000 R08: 0000000000000000 R09: 0000000000000020 Jul 26 15:05:02 rx [11061396.233859] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000084b Jul 26 15:05:02 rx [11061396.241243] R13: 00007f1ef4a26b10 R14: 0000000000000275 R15: 000055592030f1e8 Jul 26 15:05:02 rx [11061396.248628] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler nft_ct sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 mlx5_core hid_generic pci_hyperv_intf crc32_pclmul tls usbhid ahci mlxfw bnxt_en libahci hid nvme i2c_piix4 nvme_core wmi Jul 26 15:05:02 rx [11061396.324334] CR2: 0000000000000020 Jul 26 15:05:02 rx [11061396.327944] ---[ end trace 68a2b679d1cfb4f1 ]--- Jul 26 15:05:02 rx [11061396.433435] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061396.438137] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061396.457144] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061396.462629] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061396.470012] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061396.477396] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061396.484779] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061396.492164] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061396.499547] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061396.507886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061396.513884] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061396.521267] PKRU: 55555554 Jul 26 15:05:02 rx [11061396.524230] Kernel panic - not syncing: Fatal exception in interrupt Jul 26 15:05:02 rx [11061396.530885] Kernel Offset: 0x1b200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Jul 26 15:05:03 rx [11061396.660181] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- After we hit this we disabled TLP by setting tcp_early_retrans to 0 and then hit the crash in the RACK case: Aug 7 07:26:16 rx [1006006.265582] BUG: kernel NULL pointer dereference, address: 0000000000000020 Aug 7 07:26:16 rx [1006006.272719] #PF: supervisor read access in kernel mode Aug 7 07:26:16 rx [1006006.278030] #PF: error_code(0x0000) - not-present page Aug 7 07:26:16 rx [1006006.283343] PGD 0 P4D 0 Aug 7 07:26:16 rx [1006006.286057] Oops: 0000 [#1] SMP NOPTI Aug 7 07:26:16 rx [1006006.289896] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.4.0-174-generic AsahiLinux#193-Ubuntu Aug 7 07:26:16 rx [1006006.299107] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Aug 7 07:26:16 rx [1006006.309970] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.314584] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Aug 7 07:26:16 rx [1006006.333499] RSP: 0018:ffffb42600a50960 EFLAGS: 00010246 Aug 7 07:26:16 rx [1006006.338895] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Aug 7 07:26:16 rx [1006006.346193] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff92d687ed8160 Aug 7 07:26:16 rx [1006006.353489] RBP: ffffb42600a50978 R08: 0000000000000000 R09: 00000000cd896dcc Aug 7 07:26:16 rx [1006006.360786] R10: ffff92dc3404f400 R11: 0000000000000001 R12: ffff92d687ed8000 Aug 7 07:26:16 rx [1006006.368084] R13: ffff92d687ed8160 R14: 00000000cd896dcc R15: 00000000cd8fca81 Aug 7 07:26:16 rx [1006006.375381] FS: 0000000000000000(0000) GS:ffff93158ad40000(0000) knlGS:0000000000000000 Aug 7 07:26:16 rx [1006006.383632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Aug 7 07:26:16 rx [1006006.389544] CR2: 0000000000000020 CR3: 0000003e775ce006 CR4: 0000000000760ee0 Aug 7 07:26:16 rx [1006006.396839] PKRU: 55555554 Aug 7 07:26:16 rx [1006006.399717] Call Trace: Aug 7 07:26:16 rx [1006006.402335] Aug 7 07:26:16 rx [1006006.404525] ? show_regs.cold+0x1a/0x1f Aug 7 07:26:16 rx [1006006.408532] ? __die+0x90/0xd9 Aug 7 07:26:16 rx [1006006.411760] ? no_context+0x196/0x380 Aug 7 07:26:16 rx [1006006.415599] ? __bad_area_nosemaphore+0x50/0x1a0 Aug 7 07:26:16 rx [1006006.420392] ? _raw_spin_lock+0x1e/0x30 Aug 7 07:26:16 rx [1006006.424401] ? bad_area_nosemaphore+0x16/0x20 Aug 7 07:26:16 rx [1006006.428927] ? do_user_addr_fault+0x267/0x450 Aug 7 07:26:16 rx [1006006.433450] ? __do_page_fault+0x58/0x90 Aug 7 07:26:16 rx [1006006.437542] ? do_page_fault+0x2c/0xe0 Aug 7 07:26:16 rx [1006006.441470] ? page_fault+0x34/0x40 Aug 7 07:26:16 rx [1006006.445134] ? tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.449145] tcp_ack+0xa32/0xb30 Aug 7 07:26:16 rx [1006006.452542] tcp_rcv_established+0x13c/0x670 Aug 7 07:26:16 rx [1006006.456981] ? sk_filter_trim_cap+0x48/0x220 Aug 7 07:26:16 rx [1006006.461419] tcp_v6_do_rcv+0xdb/0x450 Aug 7 07:26:16 rx [1006006.465257] tcp_v6_rcv+0xc2b/0xd10 Aug 7 07:26:16 rx [1006006.468918] ip6_protocol_deliver_rcu+0xd3/0x4e0 Aug 7 07:26:16 rx [1006006.473706] ip6_input_finish+0x15/0x20 Aug 7 07:26:16 rx [1006006.477710] ip6_input+0xa2/0xb0 Aug 7 07:26:16 rx [1006006.481109] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Aug 7 07:26:16 rx [1006006.486151] ip6_sublist_rcv_finish+0x3d/0x50 Aug 7 07:26:16 rx [1006006.490679] ip6_sublist_rcv+0x1aa/0x250 Aug 7 07:26:16 rx [1006006.494779] ? ip6_rcv_finish_core.isra.0+0xa0/0xa0 Aug 7 07:26:16 rx [1006006.499828] ipv6_list_rcv+0x112/0x140 Aug 7 07:26:16 rx [1006006.503748] __netif_receive_skb_list_core+0x1a4/0x250 Aug 7 07:26:16 rx [1006006.509057] netif_receive_skb_list_internal+0x1a1/0x2b0 Aug 7 07:26:16 rx [1006006.514538] gro_normal_list.part.0+0x1e/0x40 Aug 7 07:26:16 rx [1006006.519068] napi_complete_done+0x91/0x130 Aug 7 07:26:16 rx [1006006.523352] mlx5e_napi_poll+0x18e/0x610 [mlx5_core] Aug 7 07:26:16 rx [1006006.528481] net_rx_action+0x142/0x390 Aug 7 07:26:16 rx [1006006.532398] __do_softirq+0xd1/0x2c1 Aug 7 07:26:16 rx [1006006.536142] irq_exit+0xae/0xb0 Aug 7 07:26:16 rx [1006006.539452] do_IRQ+0x5a/0xf0 Aug 7 07:26:16 rx [1006006.542590] common_interrupt+0xf/0xf Aug 7 07:26:16 rx [1006006.546421] Aug 7 07:26:16 rx [1006006.548695] RIP: 0010:native_safe_halt+0xe/0x10 Aug 7 07:26:16 rx [1006006.553399] Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Aug 7 07:26:16 rx [1006006.572309] RSP: 0018:ffffb42600177e70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffc2 Aug 7 07:26:16 rx [1006006.580040] RAX: ffffffff8ed08b20 RBX: 0000000000000005 RCX: 0000000000000001 Aug 7 07:26:16 rx [1006006.587337] RDX: 00000000f48eeca2 RSI: 0000000000000082 RDI: 0000000000000082 Aug 7 07:26:16 rx [1006006.594635] RBP: ffffb42600177e90 R08: 0000000000000000 R09: 000000000000020f Aug 7 07:26:16 rx [1006006.601931] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000005 Aug 7 07:26:16 rx [1006006.609229] R13: ffff93157deb5f00 R14: 0000000000000000 R15: 0000000000000000 Aug 7 07:26:16 rx [1006006.616530] ? __cpuidle_text_start+0x8/0x8 Aug 7 07:26:16 rx [1006006.620886] ? default_idle+0x20/0x140 Aug 7 07:26:16 rx [1006006.624804] arch_cpu_idle+0x15/0x20 Aug 7 07:26:16 rx [1006006.628545] default_idle_call+0x23/0x30 Aug 7 07:26:16 rx [1006006.632640] do_idle+0x1fb/0x270 Aug 7 07:26:16 rx [1006006.636035] cpu_startup_entry+0x20/0x30 Aug 7 07:26:16 rx [1006006.640126] start_secondary+0x178/0x1d0 Aug 7 07:26:16 rx [1006006.644218] secondary_startup_64+0xa4/0xb0 Aug 7 07:26:17 rx [1006006.648568] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet ast mii drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 hid_generic mlx5_core pci_hyperv_intf crc32_pclmul usbhid ahci tls mlxfw bnxt_en hid libahci nvme i2c_piix4 nvme_core wmi [last unloaded: cpuid] Aug 7 07:26:17 rx [1006006.726180] CR2: 0000000000000020 Aug 7 07:26:17 rx [1006006.729718] ---[ end trace e0e2e37e4e612984 ]--- Prior to seeing the first crash and on other machines we also see the warning in tcp_send_loss_probe() where packets_out is non-zero, but both transmit and retrans queues are empty so we know the box is seeing some accounting issue in this area: Jul 26 09:15:27 kernel: ------------[ cut here ]------------ Jul 26 09:15:27 kernel: invalid inflight: 2 state 1 cwnd 68 mss 8988 Jul 26 09:15:27 kernel: WARNING: CPU: 16 PID: 0 at net/ipv4/tcp_output.c:2605 tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif joydev input_leds rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_he> Jul 26 09:15:27 kernel: CPU: 16 PID: 0 Comm: swapper/16 Not tainted 5.4.0-174-generic AsahiLinux#193-Ubuntu Jul 26 09:15:27 kernel: Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 09:15:27 kernel: RIP: 0010:tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Code: 08 26 01 00 75 e2 41 0f b6 54 24 12 41 8b 8c 24 c0 06 00 00 45 89 f0 48 c7 c7 e0 b4 20 a7 c6 05 8d 08 26 01 01 e8 4a c0 0f 00 <0f> 0b eb ba 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 Jul 26 09:15:27 kernel: RSP: 0018:ffffb7838088ce00 EFLAGS: 00010286 Jul 26 09:15:27 kernel: RAX: 0000000000000000 RBX: ffff9b84b5630430 RCX: 0000000000000006 Jul 26 09:15:27 kernel: RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9b8e4621c8c0 Jul 26 09:15:27 kernel: RBP: ffffb7838088ce18 R08: 0000000000000927 R09: 0000000000000004 Jul 26 09:15:27 kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff9b84b5630000 Jul 26 09:15:27 kernel: R13: 0000000000000000 R14: 000000000000231c R15: ffff9b84b5630430 Jul 26 09:15:27 kernel: FS: 0000000000000000(0000) GS:ffff9b8e46200000(0000) knlGS:0000000000000000 Jul 26 09:15:27 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 09:15:27 kernel: CR2: 000056238cec2380 CR3: 0000003e49ede005 CR4: 0000000000760ee0 Jul 26 09:15:27 kernel: PKRU: 55555554 Jul 26 09:15:27 kernel: Call Trace: Jul 26 09:15:27 kernel: <IRQ> Jul 26 09:15:27 kernel: ? show_regs.cold+0x1a/0x1f Jul 26 09:15:27 kernel: ? __warn+0x98/0xe0 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? report_bug+0xd1/0x100 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? recalibrate_cpu_khz+0x10/0x10 Jul 26 09:15:27 kernel: ? ktime_get+0x3e/0xa0 Jul 26 09:15:27 kernel: ? native_x2apic_icr_write+0x30/0x30 Jul 26 09:15:27 kernel: run_timer_softirq+0x2a/0x50 Jul 26 09:15:27 kernel: __do_softirq+0xd1/0x2c1 Jul 26 09:15:27 kernel: irq_exit+0xae/0xb0 Jul 26 09:15:27 kernel: smp_apic_timer_interrupt+0x7b/0x140 Jul 26 09:15:27 kernel: apic_timer_interrupt+0xf/0x20 Jul 26 09:15:27 kernel: </IRQ> Jul 26 09:15:27 kernel: RIP: 0010:native_safe_halt+0xe/0x10 Jul 26 09:15:27 kernel: Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 <c3> 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Jul 26 09:15:27 kernel: RSP: 0018:ffffb783801cfe70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 Jul 26 09:15:27 kernel: RAX: ffffffffa6908b20 RBX: 0000000000000010 RCX: 0000000000000001 Jul 26 09:15:27 kernel: RDX: 000000006fc0c97e RSI: 0000000000000082 RDI: 0000000000000082 Jul 26 09:15:27 kernel: RBP: ffffb783801cfe90 R08: 0000000000000000 R09: 0000000000000225 Jul 26 09:15:27 kernel: R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000010 Jul 26 09:15:27 kernel: R13: ffff9b8e390b0000 R14: 0000000000000000 R15: 0000000000000000 Jul 26 09:15:27 kernel: ? __cpuidle_text_start+0x8/0x8 Jul 26 09:15:27 kernel: ? default_idle+0x20/0x140 Jul 26 09:15:27 kernel: arch_cpu_idle+0x15/0x20 Jul 26 09:15:27 kernel: default_idle_call+0x23/0x30 Jul 26 09:15:27 kernel: do_idle+0x1fb/0x270 Jul 26 09:15:27 kernel: cpu_startup_entry+0x20/0x30 Jul 26 09:15:27 kernel: start_secondary+0x178/0x1d0 Jul 26 09:15:27 kernel: secondary_startup_64+0xa4/0xb0 Jul 26 09:15:27 kernel: ---[ end trace e7ac822987e33be1 ]--- The NULL ptr deref is coming from tcp_rto_delta_us() attempting to pull an skb off the head of the retransmit queue and then dereferencing that skb to get the skb_mstamp_ns value via tcp_skb_timestamp_us(skb). The crash is the same one that was reported a # of years ago here: https://lore.kernel.org/netdev/[email protected]/T/#t and the kernel we're running has the fix which was added to resolve this issue. Unfortunately we've been unsuccessful so far in reproducing this problem in the lab and do not have the luxury of pushing out a new kernel to try and test if newer kernels resolve this issue at the moment. I realize this is a report against both an Ubuntu kernel and also an older 5.4 kernel. I have reported this issue to Ubuntu here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2077657 however I feel like since this issue has possibly cropped up again it makes sense to build in some protection in this path (even on the latest kernel versions) since the code in question just blindly assumes there's a valid skb without testing if it's NULL b/f it looks at the timestamp. Given we have seen crashes in this path before and now this case it seems like we should protect ourselves for when packets_out accounting is incorrect. While we should fix that root cause we should also just make sure the skb is not NULL before dereferencing it. Also add a warn once here to capture some information if/when the problem case is hit again. Fixes: e1a10ef ("tcp: introduce tcp_rto_delta_us() helper for xmit timer fix") Signed-off-by: Josh Hunt <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 AsahiLinux#6 will wait on CPU0 #1, CPU0 AsahiLinux#8 will wait on CPU2 #3, and CPU2 AsahiLinux#7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip AsahiLinux#330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 8151a6c upstream. [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

This drivers adds support for the display crossbar used to route display controller streams to the three different modes (DP AltMode, USB4 Tunnel #0/#1) of the Type-C ports. Signed-off-by: Sven Peter <[email protected]>

[ Upstream commit 7b12469 ] The km.state is not checked in driver's delayed work. When xfrm_state_check_expire() is called, the state can be reset to XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This happens when xfrm state is deleted, but not freed yet. As __xfrm_state_delete() is called again in xfrm timer, the following crash occurs. To fix this issue, skip xfrm_state_check_expire() if km.state is not XFRM_STATE_VALID. Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core] RIP: 0010:__xfrm_state_delete+0x3d/0x1b0 Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48 RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246 RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036 RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980 RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246 R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400 FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x1a2/0x390 ? asm_exc_general_protection+0x22/0x30 ? __xfrm_state_delete+0x3d/0x1b0 ? __xfrm_state_delete+0x2f/0x1b0 xfrm_timer_handler+0x174/0x350 ? __xfrm_state_delete+0x1b0/0x1b0 __hrtimer_run_queues+0x121/0x270 hrtimer_run_softirq+0x88/0xd0 handle_softirqs+0xcc/0x270 do_softirq+0x3c/0x50 </IRQ> <TASK> __local_bh_enable_ip+0x47/0x50 mlx5e_ipsec_handle_sw_limits+0x7d/0x90 [mlx5_core] process_one_work+0x137/0x2d0 worker_thread+0x28d/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: b2f7b01 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c20029d ] After commit 7c6d2ec ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc9 ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme torvalds#991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0 [ 70.724561] Call Trace: [ 70.724561] <TASK> [ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784) [ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2)) [ 70.724561] ? irqentry_enter (kernel/entry/common.c:237) [ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2)) [ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) [ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1)) [ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1)) [ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 70.724561] RIP: 0033:0x41ae09 Fixes: cf9acc9 ("net: virtio_net_hdr_to_skb: count transport header in UFO") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Jonathan Davies <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: Jonathan Davies <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7257d9c ] xe_migrate_copy designed to copy content of TTM resources. When source resource is null, it will trigger a NULL pointer dereference in xe_migrate_copy. To avoid this situation, update lacks source flag to true for this case, the flag will trigger xe_migrate_clear rather than xe_migrate_copy. Issue trace: <7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14, sizes: 4194304 & 4194304 <7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15, sizes: 4194304 & 4194304 <1> [317.128055] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [317.128064] #PF: supervisor read access in kernel mode <1> [317.128066] #PF: error_code(0x0000) - not-present page <6> [317.128069] PGD 0 P4D 0 <4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted: G U N 6.11.0-rc7-xe #1 <4> [317.128078] Tainted: [U]=USER, [N]=TEST <4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024 <4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8 fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31 ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff <4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246 <4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX: 0000000000000000 <4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI: 0000000000000000 <4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09: 0000000000000001 <4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88814e7b1f08 <4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15: 0000000000000001 <4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000) knlGS:0000000000000000 <4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4: 0000000000770ef0 <4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 <4> [317.128184] PKRU: 55555554 <4> [317.128185] Call Trace: <4> [317.128187] <TASK> <4> [317.128189] ? show_regs+0x67/0x70 <4> [317.128194] ? __die_body+0x20/0x70 <4> [317.128196] ? __die+0x2b/0x40 <4> [317.128198] ? page_fault_oops+0x15f/0x4e0 <4> [317.128203] ? do_user_addr_fault+0x3fb/0x970 <4> [317.128205] ? lock_acquire+0xc7/0x2e0 <4> [317.128209] ? exc_page_fault+0x87/0x2b0 <4> [317.128212] ? asm_exc_page_fault+0x27/0x30 <4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128263] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128265] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128267] ? sg_free_append_table+0x20/0x80 <4> [317.128271] ? lock_acquire+0xc7/0x2e0 <4> [317.128273] ? mark_held_locks+0x4d/0x80 <4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128281] ? __pm_runtime_resume+0x60/0xa0 <4> [317.128284] xe_bo_move+0x682/0xc50 [xe] <4> [317.128315] ? lock_is_held_type+0xaa/0x120 <4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm] <4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm] <4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe] <4> [317.128360] ? find_held_lock+0x31/0x90 <4> [317.128363] ? lock_release+0xd1/0x2a0 <4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] <4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe] <4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit] <4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [kunit] <4> [317.128407] kthread+0xf5/0x130 <4> [317.128410] ? __pfx_kthread+0x10/0x10 <4> [317.128412] ret_from_fork+0x39/0x60 <4> [317.128415] ? __pfx_kthread+0x10/0x10 <4> [317.128416] ret_from_fork_asm+0x1a/0x30 <4> [317.128420] </TASK> Fixes: 266c858 ("drm/xe/xe2: Handle flat ccs move for igfx.") Signed-off-by: Zhanjun Dong <[email protected]> Reviewed-by: Thomas Hellström <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 59a1c9c) Signed-off-by: Lucas De Marchi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7dd5d25 ] If SER L2 occurs during the WoWLAN resume flow, the add interface flow is triggered by ieee80211_reconfig(). However, due to rtw89_wow_resume() return failure, it will cause the add interface flow to be executed again, resulting in a double add list and causing a kernel panic. Therefore, we have added a check to prevent double adding of the list. list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:37! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:__list_add_valid_or_report+0x5e/0xb0 Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12 RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900 RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0 R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060 R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010 FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? __list_add_valid_or_report+0x5e/0xb0 ? do_error_trap+0x6d/0x90 ? __list_add_valid_or_report+0x5e/0xb0 ? handle_invalid_op+0x30/0x40 ? __list_add_valid_or_report+0x5e/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x5e/0xb0 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f] drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ? finish_wait+0x3e/0x90 ? synchronize_rcu_expedited+0x174/0x260 ? sync_rcu_exp_done_unlocked+0x50/0x50 ? wake_bit_function+0x40/0x40 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] process_scheduled_works+0x1e5/0x480 worker_thread+0xea/0x1e0 kthread+0xdb/0x110 ? move_linked_works+0x90/0x90 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x3b/0x50 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev gsmi: Log Shutdown Reason 0x03 ---[ end trace 0000000000000000 ]--- Signed-off-by: Chih-Kang Chang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0a2ed70 ] The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address. ---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618 crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits> crash> px tsk_in_cpu[14] $66 = 0xffffffff crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620 crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad] crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ---------- To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu(). Signed-off-by: Seiji Nishikawa <[email protected]> Link: https://patch.msgid.link/[email protected] [ rjw: Subject edit, avoid updates to the same value ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7f7b850 ] It's observed that a crash occurs during hot-remove a memory device, in which user is accessing the hugetlb. See calltrace as following: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790 Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ torvalds#492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:do_user_addr_fault+0x2a0/0x790 Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41 RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046 RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658 R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000 FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x8d/0x190 ? do_user_addr_fault+0x2a0/0x790 ? report_bug+0x1c3/0x1d0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? do_user_addr_fault+0x2a0/0x790 ? exc_page_fault+0x31/0x200 exc_page_fault+0x68/0x200 <...snip...> BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ torvalds#492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dentry_name+0x1f4/0x440 <...snip...> ? dentry_name+0x2fa/0x440 vsnprintf+0x1f3/0x4f0 vprintk_store+0x23a/0x540 vprintk_emit+0x6d/0x330 _printk+0x58/0x80 dump_mapping+0x10b/0x1a0 ? __pfx_free_object_rcu+0x10/0x10 __dump_page+0x26b/0x3e0 ? vprintk_emit+0xe0/0x330 ? _printk+0x58/0x80 ? dump_page+0x17/0x50 dump_page+0x17/0x50 do_migrate_range+0x2f7/0x7f0 ? do_migrate_range+0x42/0x7f0 ? offline_pages+0x2f4/0x8c0 offline_pages+0x60a/0x8c0 memory_subsys_offline+0x9f/0x1c0 ? lockdep_hardirqs_on+0x77/0x100 ? _raw_spin_unlock_irqrestore+0x38/0x60 device_offline+0xe3/0x110 state_store+0x6e/0xc0 kernfs_fop_write_iter+0x143/0x200 vfs_write+0x39f/0x560 ksys_write+0x65/0xf0 do_syscall_64+0x62/0x130 Previously, some sanity check have been done in dump_mapping() before the print facility parsing '%pd' though, it's still possible to run into an invalid dentry.d_name.name. Since dump_mapping() only needs to dump the filename only, retrieve it by itself in a safer way to prevent an unnecessary crash. Note that either retrieving the filename with '%pd' or strncpy_from_kernel_nofault(), the filename could be unreliable. Signed-off-by: Li Zhijian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@flags

[ Upstream commit 56440d7 ] While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme torvalds#1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme torvalds#1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] <TASK> [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6 ("l2tp : multicast notification to the registered listeners") Signed-off-by: Eric Dumazet <[email protected]> Cc: James Chapman <[email protected]> Cc: Tom Parkin <[email protected]> Cc: Johannes Berg <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1ab6032 ] When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb Reported-by: David Howells <[email protected]> Fixes: e77fe73 ("cifs: we can not use small padding iovs together with encryption") Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d62b140 ] Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: 9b98d39 ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 73f3508 ] When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ AsahiLinux#8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 035ba76 ("tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init") Signed-off-by: Mikel Rychliski <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 47dd544 ] The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. Exactly same bug cause as the oob fixed in commit b33fb5b ("net: qualcomm: rmnet: fix global oob in rmnet_policy"). ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862 CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x14f/0x750 mm/kasan/report.c:395 kasan_report+0x139/0x170 mm/kasan/report.c:495 validate_nla lib/nlattr.c:388 [inline] __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 __nla_parse+0x3c/0x50 lib/nlattr.c:700 nla_parse_nested_deprecated include/net/netlink.h:1269 [inline] __rtnl_newlink net/core/rtnetlink.c:3514 [inline] rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623 rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f67b19a24ad RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004 RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40 </TASK> The buggy address belongs to the variable: wwan_rtnl_policy+0x20/0x40 The buggy address belongs to the physical page: page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner info is not present (never set?) Memory state around the buggy address: ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9 ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 >ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 ^ ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== According to the comment of `nla_parse_nested_deprecated`, use correct size `IFLA_WWAN_MAX` here to fix this issue. Fixes: 88b7105 ("wwan: add interface creation support") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Loic Poulain <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1d59d47 ] Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec Fixes: 4565d26 ("PCI/pwrctl: Add PCI power control core code") Link: https://lore.kernel.org/r/[email protected] Reported-by: Konrad Dybcio <[email protected]> Tested-by: Konrad Dybcio <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…n_net [ Upstream commit d5ff2fb ] In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net. Fixes: 7c24fa2 ("NFSD: replace delayed_work with work_struct for nfsd_client_shrinker") Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 3c36a72 upstream. [BUG] Syzbot reports the following crash: BTRFS info (device loop0 state MCS): disabling free space tree BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1) BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2) Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline] RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041 Call Trace: <TASK> btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530 btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312 btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012 btrfs_remount_rw fs/btrfs/super.c:1309 [inline] btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534 btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline] btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115 vfs_get_tree+0x90/0x2b0 fs/super.c:1800 do_new_mount+0x2be/0xb40 fs/namespace.c:3472 do_mount fs/namespace.c:3812 [inline] __do_sys_mount fs/namespace.c:4020 [inline] __se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] To support mounting different subvolume with different RO/RW flags for the new mount APIs, btrfs introduced two workaround to support this feature: - Skip mount option/feature checks if we are mounting a different subvolume - Reconfigure the fs to RW if the initial mount is RO Combining these two, we can have the following sequence: - Mount the fs ro,rescue=all,clear_cache,space_cache=v1 rescue=all will mark the fs as hard read-only, so no v2 cache clearing will happen. - Mount a subvolume rw of the same fs. We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY because our new fc is RW, different from the original fs. Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag first so that we can grab the existing fs_info. Then we reconfigure the fs to RW. - During reconfiguration, option/features check is skipped This means we will restart the v2 cache clearing, and convert back to v1 cache. This will trigger fs writes, and since the original fs has "rescue=all" option, it skips the csum tree read. And eventually causing NULL pointer dereference in super block writeback. [FIX] For reconfiguration caused by different subvolume RO/RW flags, ensure we always run btrfs_check_options() to ensure we have proper hard RO requirements met. In fact the function btrfs_check_options() doesn't really do many complex checks, but hard RO requirement and some feature dependency checks, thus there is no special reason not to do the check for mount reconfiguration. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: f044b31 ("btrfs: handle the ro->rw transition for mounting different subvolumes") CC: [email protected] # 6.8+ Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6889cd2 upstream. During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d59 ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: c7a5899 ("xfrm: redact SA secret with lockdown confidentiality") Cc: [email protected] Co-developed-by: Boris Tonofa <[email protected]> Signed-off-by: Boris Tonofa <[email protected]> Signed-off-by: Petr Vaganov <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d0e806b upstream. During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty AsahiLinux#18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, AsahiLinux#16] 6118: a9025bf5 stp x21, x22, [sp, AsahiLinux#32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, AsahiLinux#48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, AsahiLinux#64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, AsahiLinux#80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, torvalds#776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, AsahiLinux#32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argument) to sdw_stream_add_slave() without any checks. Value from x4 is copied to x25 and finally it aborts on trying to load a value from address in x25 plus offset 32 (in dec) which corresponds to master_list member in struct sdw_stream_runtime: struct sdw_stream_runtime { const char * name; /* 0 8 */ struct sdw_stream_params params; /* 8 12 */ enum sdw_stream_state state; /* 20 4 */ enum sdw_stream_type type; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ here-> struct list_head master_list; /* 32 16 */ int m_rt_count; /* 48 4 */ /* size: 56, cachelines: 1, members: 6 */ /* sum members: 48, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 56 bytes */ Fix this by adding required calls to qcom_snd_sdw_startup() and sdw_release_stream() to startup and shutdown routines which restores the previous correct behaviour when ->set_stream() method is called to set a valid stream runtime pointer on playback startup. Reproduced and then fix was tested on db845c RB3 board. Reported-by: Dmitry Baryshkov <[email protected]> Cc: [email protected] Fixes: 15c7fab ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") Cc: Srinivas Kandagatla <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Lenovo Yoga C630 Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ================================================================== Fixes: 4c3b54a ("virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result") Signed-off-by: Feng Liu <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is executed and at the end put_device() is called which ends up calling mlx5_vdpa_free(). This function will execute the same cleanup all over again. Most resources support being cleaned up twice, but the recent mlx5_vdpa_destroy_mr_resources() doesn't. This change drops the explicit cleanup from within the mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work. This issue was discovered while trying to add 2 vdpa devices with the same name: $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2 $> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3 ... yields the following dump: BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_workqueue+0xe/0x2a0 Code: ... RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580 FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? destroy_workqueue+0xe/0x2a0 mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_put+0x8d/0x230 mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa] ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __count_memcg_events+0x53/0xe0 ? handle_mm_fault+0x100/0x220 ? do_user_addr_fault+0x40d/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fdfa6c66b57 Code: ... RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57 RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003 RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3 </TASK> Modules linked in: ... CR2: 00000000000000b8 Fixes: 6211165 ("vdpa/mlx5: Postpone MR deletion") Signed-off-by: Dragos Tatulea <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Eugenio Pérez <[email protected]>

Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket. Reported-by: Eric Dumazet <[email protected]> Fixes: 419ce13 ("tcp: allow again tcp_disconnect() when threads are waiting") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>

syzbot and Daan report a NULL pointer crash in the new full swap cluster reclaim work: > Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI > KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] > CPU: 1 UID: 0 PID: 51 Comm: kworker/1:1 Not tainted 6.12.0-rc6-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 > Workqueue: events swap_reclaim_work > RIP: 0010:__list_del_entry_valid_or_report+0x20/0x1c0 lib/list_debug.c:49 > Code: 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 48 89 fe 48 83 c7 08 48 83 ec 18 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 19 01 00 00 48 89 f2 48 8b 4e 08 48 b8 00 00 00 > RSP: 0018:ffffc90000bb7c30 EFLAGS: 00010202 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff88807b9ae078 > RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008 > RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 > R10: 0000000000000001 R11: 000000000000004f R12: dffffc0000000000 > R13: ffffffffffffffb8 R14: ffff88807b9ae000 R15: ffffc90003af1000 > FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007fffaca68fb8 CR3: 00000000791c8000 CR4: 00000000003526f0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > Call Trace: > <TASK> > __list_del_entry_valid include/linux/list.h:124 [inline] > __list_del_entry include/linux/list.h:215 [inline] > list_move_tail include/linux/list.h:310 [inline] > swap_reclaim_full_clusters+0x109/0x460 mm/swapfile.c:748 > swap_reclaim_work+0x2e/0x40 mm/swapfile.c:779 The syzbot console output indicates a virtual environment where swapfile is on a rotational device. In this case, clusters aren't actually used, and si->full_clusters is not initialized. Daan's report is from qemu, so likely rotational too. Make sure to only schedule the cluster reclaim work when clusters are actually in use. Link: https://lkml.kernel.org/r/[email protected] Link: https://lore.kernel.org/lkml/[email protected]/ Link: systemd/systemd#35044 Fixes: 5168a68 ("mm, swap: avoid over reclaim of full clusters") Reported-by: [email protected] Signed-off-by: Johannes Weiner <[email protected]> Reported-by: Daan De Meyer <[email protected]> Cc: Kairui Song <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled. Debugging traced the issue back to b69a2af ("x86/kexec: Carry forward IMA measurement log on kexec"). Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC enabled, which led to the oversight, with the following incarnation: ... ima: No TPM chip found, activating TPM-bypass! Loading compiled-in module X.509 certificates Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656' ima: Allocated hash algorithm: sha256 Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ AsahiLinux#14 Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023 RIP: 0010:ima_restore_measurement_list Call Trace: <TASK> ? show_trace_log_lvl ? show_trace_log_lvl ? ima_load_kexec_buffer ? __die_body.cold ? die_addr ? exc_general_protection ? asm_exc_general_protection ? ima_restore_measurement_list ? vprintk_emit ? ima_load_kexec_buffer ima_load_kexec_buffer ima_init ? __pfx_init_ima init_ima ? __pfx_init_ima do_one_initcall do_initcalls ? __pfx_kernel_init kernel_init_freeable kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- ... Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Rebooting in 10 seconds.. Adding debug printks showed that the stored addr and size of ima_kexec buffer are not decrypted correctly like: ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359 Three types of setup_data info — SETUP_EFI, - SETUP_IMA, and - SETUP_RNG_SEED are passed to the kexec/kdump kernel. Only the ima_kexec buffer experienced incorrect decryption. Debugging identified a bug in early_memremap_is_setup_data(), where an incorrect range calculation occurred due to the len variable in struct setup_data ended up only representing the length of the data field, excluding the struct's size, and thus leading to miscalculation. Address a similar issue in memremap_is_setup_data() while at it. [ bp: Heavily massage. ] Fixes: b3c72fc ("x86/boot: Introduce setup_indirect") Signed-off-by: Baoquan He <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: Tom Lendacky <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the following code flow, the RCU read lock is not held, causing the following error when `RCU_PROVE` is not held. The same problem might show up in the IPv6 code path. 6.12.0-rc5-kbuilder-01145-gbac17284bdcb AsahiLinux#33 Tainted: G E N ----------------------------- net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!! rcu_scheduler_active = 2, debug_locks = 1 2 locks held by RetransmitAggre/3519: #0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290 #1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90 stack backtrace: lockdep_rcu_suspicious mr_table_dump ipmr_rtm_dumproute rtnl_dump_all rtnl_dumpit netlink_dump __netlink_dump_start rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg This is not a problem per see, since the RTNL lock is held here, so, it is safe to iterate in the list without the RCU read lock, as suggested by Eric. To alleviate the concern, modify the code to use list_for_each_entry_rcu() with the RTNL-held argument. The annotation will raise an error only if RTNL or RCU read lock are missing during iteration, signaling a legitimate problem, otherwise it will avoid this false positive. This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls this function as well. Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Simpledrm is "DMA" access is not limited. All CPU addressible memory can be used via direct DMA mappings. Fixes following warning on Apple silicon systems. Physical memory on those systems starts at (1 << 35) or (1 << 40) so 32-bit direct DMA mappings are not possible. ------------[ cut here ]------------ simple-framebuffer 9e5064000.framebuffer: swiotlb addr 0x00000009de654000+16384 overflow (mask ffffffff, bus limit 0). WARNING: CPU: 3 PID: 961 at kernel/dma/swiotlb.c:928 swiotlb_map+0x1f4/0x2a0 Modules linked in: ... CPU: 3 PID: 961 Comm: kwin_wayland Not tainted 6.5.0-asahi+ #1 Hardware name: Apple Mac mini (M2, 2023) (DT) ... Call trace: swiotlb_map+0x1f4/0x2a0 dma_direct_map_sg+0x8c/0x2a8 dma_map_sgtable+0x5c/0xd0 drm_gem_map_dma_buf+0x64/0xb8 dma_buf_map_attachment+0xac/0x158 dma_buf_map_attachment_unlocked+0x48/0x80 drm_gem_prime_import_dev+0xa0/0x1a0 drm_gem_prime_fd_to_handle+0xc8/0x218 drm_prime_fd_to_handle_ioctl+0x34/0x50 drm_ioctl_kernel+0xe4/0x160 drm_ioctl+0x23c/0x3e0 ... ---[ end trace 0000000000000000 ]--- Avoids using swiotbl bounce buffers on other platforms when the mapped memory is above 4GB. Fixes: 11e8f5f ("drm: Add simpledrm driver") Signed-off-by: Janne Grunau <[email protected]>

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ AsahiLinux#251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <[email protected]> Cc: Armin Wolf <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>

tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] Fixes: 80cd22c ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ torvalds#959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ... Signed-off-by: Milan Broz <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Fixes: fb09876 ("dm-integrity: introduce the Inline mode") Cc: [email protected] # 6.11+

Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: [email protected] Signed-off-by: Ilia Gavrilov <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

A softlockup issue was found with stress test: watchdog: BUG: soft lockup - CPU#27 stuck for 26s! [migration/27:181] CPU: 27 UID: 0 PID: 181 Comm: migration/27 6.14.0-rc2-next-20250210 #1 Stopper: multi_cpu_stop <- stop_machine_from_inactive_cpu RIP: 0010:stop_machine_yield+0x2/0x10 RSP: 0000:ff4a0dcecd19be48 EFLAGS: 00000246 RAX: ffffffff89c0108f RBX: ff4a0dcec03afe44 RCX: 0000000000000000 RDX: ff1cdaaf6eba5808 RSI: 0000000000000282 RDI: ff1cda80c1775a40 RBP: 0000000000000001 R08: 00000011620096c6 R09: 7fffffffffffffff R10: 0000000000000001 R11: 0000000000000100 R12: ff1cda80c1775a40 R13: 0000000000000000 R14: 0000000000000001 R15: ff4a0dcec03afe20 FS: 0000000000000000(0000) GS:ff1cdaaf6eb80000(0000) CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000025e2c2a001 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: multi_cpu_stop+0x8f/0x100 cpu_stopper_thread+0x90/0x140 smpboot_thread_fn+0xad/0x150 kthread+0xc2/0x100 ret_from_fork+0x2d/0x50 The stress test involves CPU hotplug operations and memory control group (memcg) operations. The scenario can be described as follows: echo xx > memory.max cache_ap_online oom_reaper (CPU23) (CPU50) xx < usage stop_machine_from_inactive_cpu for(;;) // all active cpus trigger OOM queue_stop_cpus_work // waiting oom_reaper multi_cpu_stop(migration/xx) // sync all active cpus ack // waiting cpu23 ack // CPU50 loops in multi_cpu_stop waiting cpu50 Detailed explanation: 1. When the usage is larger than xx, an OOM may be triggered. If the process does not handle with ths kill signal immediately, it will loop in the memory_max_write. 2. When cache_ap_online is triggered, the multi_cpu_stop is queued to the active cpus. Within the multi_cpu_stop function, it attempts to synchronize the CPU states. However, the CPU23 didn't acknowledge because it is stuck in a loop within the for(;;). 3. The oom_reaper process is blocked because CPU50 is in a loop, waiting for CPU23 to acknowledge the synchronization request. 4. Finally, it formed cyclic dependency and lead to softlockup and dead loop. To fix this issue, add cond_resched() in the memory_max_write, so that it will not block migration task. Link: https://lkml.kernel.org/r/[email protected] Fixes: b6e6edc ("mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage") Signed-off-by: Chen Ridong <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Muchun Song <[email protected]> Cc: Wang Weiyang <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 AsahiLinux#232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled. Fixes: 74d1696 ("nvmet-loop: avoid using mutex in IO hotpath") Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Nilay Shroff <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Tested-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Keith Busch <[email protected]>

The delayed work item function nvmet_pci_epf_poll_sqs_work() polls all submission queues and keeps running in a loop as long as commands are being submitted by the host. Depending on the preemption configuration of the kernel, under heavy command workload, this function can thus run for more than RCU_CPU_STALL_TIMEOUT seconds, leading to a RCU stall: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 5-....: (20998 ticks this GP) idle=4244/1/0x4000000000000000 softirq=301/301 fqs=5132 rcu: (t=21000 jiffies g=-443 q=12 ncpus=8) CPU: 5 UID: 0 PID: 82 Comm: kworker/5:1 Not tainted 6.14.0-rc2 #1 Hardware name: Radxa ROCK 5B (DT) Workqueue: events nvmet_pci_epf_poll_sqs_work [nvmet_pci_epf] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dw_edma_device_tx_status+0xb8/0x130 lr : dw_edma_device_tx_status+0x9c/0x130 sp : ffff800080b5bbb0 x29: ffff800080b5bbb0 x28: ffff0331c5c78400 x27: ffff0331c1cd1960 x26: ffff0331c0e39010 x25: ffff0331c20e4000 x24: ffff0331c20e4a90 x23: 0000000000000000 x22: 0000000000000001 x21: 00000000005aca33 x20: ffff800080b5bc30 x19: ffff0331c123e370 x18: 000000000ab29e62 x17: ffffb2a878c9c118 x16: ffff0335bde82040 x15: 0000000000000000 x14: 000000000000017b x13: 00000000ee601780 x12: 0000000000000018 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000040 x8 : 00000000ee601780 x7 : 0000000105c785c0 x6 : ffff0331c1027d80 x5 : 0000000001ee7ad6 x4 : ffff0335bdea16c0 x3 : ffff0331c123e438 x2 : 00000000005aca33 x1 : 0000000000000000 x0 : ffff0331c123e410 Call trace: dw_edma_device_tx_status+0xb8/0x130 (P) dma_sync_wait+0x60/0xbc nvmet_pci_epf_dma_transfer+0x128/0x264 [nvmet_pci_epf] nvmet_pci_epf_poll_sqs_work+0x2a0/0x2e0 [nvmet_pci_epf] process_one_work+0x144/0x390 worker_thread+0x27c/0x458 kthread+0xe8/0x19c ret_from_fork+0x10/0x20 The solution for this is simply to explicitly allow rescheduling using cond_resched(). However, since doing so for every loop of nvmet_pci_epf_poll_sqs_work() significantly degrades performance (for 4K random reads using 4 I/O queues, the maximum IOPS goes down from 137 KIOPS to 110 KIOPS), call cond_resched() every second to avoid the RCU stalls. Fixes: 0faa0fe ("nvmet: New NVMe PCI endpoint function target driver") Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>

Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…umers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. Fixes: 0c4dcd6 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Signed-off-by: Kashyap Desai <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]>

into HEAD KVM/riscv fixes for 6.14, take #1 - Fix hart status check in SBI HSM extension - Fix hart suspend_type usage in SBI HSM extension - Fix error returned by SBI IPI and TIME extensions for unsupported function IDs - Fix suspend_type usage in SBI SUSP extension - Remove unnecessary vcpu kick after injecting interrupt via IMSIC guest file

We have recently seen reports of lockdep circular lock dependency warnings when loading the iAVF driver: [ 1504.790308] ====================================================== [ 1504.790309] WARNING: possible circular locking dependency detected [ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted [ 1504.790311] ------------------------------------------------------ [ 1504.790312] kworker/u128:0/13566 is trying to acquire lock: [ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710 [ 1504.790320] [ 1504.790320] but task is already holding lock: [ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf] [ 1504.790330] [ 1504.790330] which lock already depends on the new lock. [ 1504.790330] [ 1504.790330] [ 1504.790330] the existing dependency chain (in reverse order) is: [ 1504.790331] [ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}: [ 1504.790333] __lock_acquire+0x52d/0xbb0 [ 1504.790337] lock_acquire+0xd9/0x330 [ 1504.790338] mutex_lock_nested+0x4b/0xb0 [ 1504.790341] iavf_finish_config+0x37/0x240 [iavf] [ 1504.790347] process_one_work+0x248/0x6d0 [ 1504.790350] worker_thread+0x18d/0x330 [ 1504.790352] kthread+0x10e/0x250 [ 1504.790354] ret_from_fork+0x30/0x50 [ 1504.790357] ret_from_fork_asm+0x1a/0x30 [ 1504.790361] [ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}: [ 1504.790364] check_prev_add+0xf1/0xce0 [ 1504.790366] validate_chain+0x46a/0x570 [ 1504.790368] __lock_acquire+0x52d/0xbb0 [ 1504.790370] lock_acquire+0xd9/0x330 [ 1504.790371] mutex_lock_nested+0x4b/0xb0 [ 1504.790372] register_netdevice+0x52c/0x710 [ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf] [ 1504.790379] process_one_work+0x248/0x6d0 [ 1504.790381] worker_thread+0x18d/0x330 [ 1504.790383] kthread+0x10e/0x250 [ 1504.790385] ret_from_fork+0x30/0x50 [ 1504.790387] ret_from_fork_asm+0x1a/0x30 [ 1504.790389] [ 1504.790389] other info that might help us debug this: [ 1504.790389] [ 1504.790389] Possible unsafe locking scenario: [ 1504.790389] [ 1504.790390] CPU0 CPU1 [ 1504.790391] ---- ---- [ 1504.790391] lock(&adapter->crit_lock); [ 1504.790393] lock(&dev->lock); [ 1504.790394] lock(&adapter->crit_lock); [ 1504.790395] lock(&dev->lock); [ 1504.790397] [ 1504.790397] *** DEADLOCK *** This appears to be caused by the change in commit 5fda3f3 ("net: make netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in register_netdevice. The iAVF driver calls register_netdevice() from iavf_finish_config(), as a final stage of its state machine post-probe. It currently takes the RTNL lock, then the netdev lock, and then the device critical lock. This pattern is used throughout the driver. Thus there is a strong dependency that the crit_lock should not be acquired before the net device lock. The change to register_netdevice creates an ABBA lock order violation because the iAVF driver is holding the crit_lock while calling register_netdevice, which then takes the netdev_lock. It seems likely that future refactors could result in netdev APIs which hold the netdev_lock while calling into the driver. This means that we should not re-order the locks so that netdev_lock is acquired after the device private crit_lock. Instead, notice that we already release the netdev_lock prior to calling the register_netdevice. This flow only happens during the early driver initialization as we transition through the __IAVF_STARTUP, __IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc. Analyzing the places where we take crit_lock in the driver there are two sources: a) several of the work queue tasks including adminq_task, watchdog_task, reset_task, and the finish_config task. b) various callbacks which ultimately stem back to .ndo operations or ethtool operations. The latter cannot be triggered until after the netdevice registration is completed successfully. The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue that has a max limit of 1, and thus guarantees that only a single work item on the queue is executing at any given time, so none of the other work threads could be executing due to the ordered workqueue guarantees. The iavf_finish_config() function also does not do anything else after register_netdevice, unless it fails. It seems unlikely that the driver private crit_lock is protecting anything that register_netdevice() itself touches. Thus, to fix this ABBA lock violation, lets simply release the adapter->crit_lock as well as netdev_lock prior to calling register_netdevice(). We do still keep holding the RTNL lock as required by the function. If we do fail to register the netdevice, then we re-acquire the adapter critical lock to finish the transition back to __IAVF_INIT_CONFIG_ADAPTER. This ensures every call where both netdev_lock and the adapter->crit_lock are acquired under the same ordering. Fixes: afc6649 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Przemek Kitszel <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds.. Fixes: 56a1485 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <[email protected]> Cc: <[email protected]> # v5.8+ Reviewed-by: Tali Perry <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts locally") moved the call to enable_drhd_fault_handling() to a code path that does not hold any lock while traversing the drhd list. Fix it by ensuring the dmar_global_lock lock is held when traversing the drhd list. Without this fix, the following warning is triggered: ============================= WARNING: suspicious RCU usage 6.14.0-rc3 AsahiLinux#55 Not tainted ----------------------------- drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by cpuhp/1/23: #0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 #1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 stack backtrace: CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 AsahiLinux#55 Call Trace: <TASK> dump_stack_lvl+0xb7/0xd0 lockdep_rcu_suspicious+0x159/0x1f0 ? __pfx_enable_drhd_fault_handling+0x10/0x10 enable_drhd_fault_handling+0x151/0x180 cpuhp_invoke_callback+0x1df/0x990 cpuhp_thread_fun+0x1ea/0x2c0 smpboot_thread_fn+0x1f5/0x2e0 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x12a/0x2d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4a/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat about a possible deadlock between dmar_global_lock and cpu_hotplug_lock. This is avoided by not holding dmar_global_lock when calling iommu_device_register(), which initiates the device probe process. Fixes: d74169c ("iommu/vt-d: Allocate DMAR fault interrupts locally") Reported-and-tested-by: Ido Schimmel <[email protected]> Closes: https://lore.kernel.org/linux-iommu/[email protected]/ Tested-by: Breno Leitao <[email protected]> Cc: [email protected] Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Ido Schimmel <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>

WhatAmISupposedToPutHere and others added 10 commits June 10, 2023 13:33

dt-bindings: input: touchscreen: Add Z2 controller bindings.

c74a907

Add bindings for touchscreen controllers attached using the Z2 protocol. Those are present in most Apple devices. Signed-off-by: Sasha Finkelstein <[email protected]>

input: apple_z2: Add a driver for Apple Z2 touchscreens

124e5d2

Adds a driver for Apple touchscreens using the Z2 protocol. Signed-off-by: Sasha Finkelstein <[email protected]>

arm64: dts: apple: t8103: Add touchbar bindings

963c974

Adds device tree entries for the touchbar digitizer Signed-off-by: Sasha Finkelstein <[email protected]>

MAINTAINERS: Add entries for Apple Z2 touchscreen driver

121a735

Add the MAINTAINERS entries for the driver Signed-off-by: Sasha Finkelstein <[email protected]>

fixup! arm64: dts: apple: t8112-j493: Add spi3 node

166ec30

Signed-off-by: Janne Grunau <[email protected]>

fixup! input: apple_z2: Add a driver for Apple Z2 touchscreens

58f97c2

Make make "cs-gpios" optional as it is not required on t8112-j493. Signed-off-by: Janne Grunau <[email protected]>

fixup! input: apple_z2: Add a driver for Apple Z2 touchscreens

7fd2623

reset spi transfer, fixes invalid pointers in apple_spi_transfer_one() Signed-off-by: Janne Grunau <[email protected]>

fixup! input: apple_z2: Add a driver for Apple Z2 touchscreens

dc31ed9

handle timed out boot completion as error Signed-off-by: Janne Grunau <[email protected]>

fixup! input: apple_z2: Add a driver for Apple Z2 touchscreens

b7a8b82

add "j493-touchbar" spi device id Signed-off-by: Janne Grunau <[email protected]>

arm64: dts: apple: t8112: Add touchbar digitizer node

ac71097

Signed-off-by: Janne Grunau <[email protected]>

WhatAmISupposedToPutHere force-pushed the z2-touchscreen branch from 121a735 to de832ec Compare June 17, 2023 12:02

WhatAmISupposedToPutHere closed this Jun 17, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Z2 touchscreen fixes and t81120-j493 support #1

Z2 touchscreen fixes and t81120-j493 support #1

jannau commented Jun 17, 2023

WhatAmISupposedToPutHere commented Jun 17, 2023

Z2 touchscreen fixes and t81120-j493 support #1

Z2 touchscreen fixes and t81120-j493 support #1

Conversation

jannau commented Jun 17, 2023

WhatAmISupposedToPutHere commented Jun 17, 2023