Merge last master #19
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…10675) Update SDK/FW to 4.5.1500/2010.1500 and SAI version to 1.21.1.1 SDK/FW features: 1. Added support for Finisar DR4 (FTCD4523E2PCM) on Spectrum-2 and Spectrum-3 systems. SAI Features: 1. ECMP overlay support for IPv6 2. BFD offloading / 4K scale 3. Host interface user traps + improved trap registration (table entry) 4. gcc11 compilation fixes 5. Read support for ACL redirect action 6. Optimize ECMP DB size 7. Buffer descriptors new defaults 8. Updated port mapping for SN2201 SAI Fixes: 1. Debug counter removal when configured with all drop reasons - Why I did it Upgrade Mellanox SDK and SAI versions to latest - How I did it Updated submodule pointers - How to verify it Regression tested
Add the following commits: - [orchagent, crm]: Reset crm threshold exceed count when threshold type changed 5ba6a54 - [pbh] [aclorch] Fixed a bug causes by updating the flow-counter value for the PBH rule 841f003 - [ACL]Avoid incrementing crm count when ACL rule create fails 3d3364f - set remote vtep the netdev down before delete 7f53db7 - Removing Vnet with scope default 2ea8581
- Why I did it Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time. This parallel execution consume CPU time and the duration of create_switch is longer than it should be. Following this finding, and the motivation to ensure these services will not interfere in the future, PMON is delayed in 90 seconds until the system finish the init flow after fastboot. - How I did it Add a timer for PMON service. Exclude for MLNX platform the start trigger of PMON when SYNCD starts in case of fastboot. Copy the timer file to the host bin image. - How to verify it Run fast-reboot on MLNX platform and observe faster create_switch execution time.
Why I did it The buffer pool & profile setting in buffer template was not correct and caused the errors like the following: ERR swss#orchagent: :- parseReference: malformed reference:[BUFFER_PROFILE|ingress_lossless_profile]. Must not be surrounded by [ ] How I did it Fix the buffer pool & profile setting by removing "[]". How to verify it Loaded image with this fix in a switch and made sure the error was not seen anymore.
#### Why I did it Need to pass LY_CTX_DISABLE_SEARCHDIR_CWD to Context in order to disable automatically searching for schemas in current working directory (which is by default searched automatically) #### How I did it add additional attribute into YANG context #### How to verify it Create some invalid link on switch : 1) **ln -s /usr/abc xxx** 2) run **spm list** --> There should not be these messages: ``` libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory) libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory) libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory) libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory) ```
Co-authored-by: ecsonic <[email protected]> Why I did it The customer report of the PCIe Bus Errors upon the SDK initialization of as7816-64x. How I did it Based on the internal info and discussion, update "pcie_aspm=off" into ONIE_PLATFORM_EXTRA_CMDLINE_LINUX of installer.conf to resolve it.
…10687) - Why I did it To add support for 800G speed for port in the yang. - How I did it Change limitation from 400G to 800G. - How to verify it Set a port speed to 800G and run the yang DB validation. e.g. by using dynamic port breakout.
Why I did it When lldpmgrd handled events of other tables besides PORT_TABLE, error message was printed to log. How I did it Handle event according to its file descriptor instead of looping all registered selectables for each coming event. How to verify it I verified same events are being handled by printing events key and operation, before and after the change. Also, before the change, in init flow after config reload, when lldpmgrd handled events of other tables besides PORT_TABLE, error messages were printed to log, this issue is solved now.
closes #10157 Why I did it Add yang model for the bgp_internal_neighbor table in config_db How I did it Add new yang model file and unit tests How to verify it UT and compile sonic_yang_models-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <[email protected]>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan [email protected] Why I did it Fixes #10158 How I did it Add yang model for config_db table BGP_VOQ_CHASSIS_NEIGHBOR and UT
Signed-off-by: Neetha John [email protected] Why I did it Address build failures due to sonic config engine unit tests failing. Failures are due to referencing format used in Arista 7800 sample output for buffer template How I did it Remove referencing format How to verify it Sonic config engine wheel should be built successfully
#### Why I did it Fix issue: Non compliant leaf list in config_db schema: #9801 #### How I did it The basic flow of DPB is like: 1. Transfer config db json value to YANG json value, name it “yangIn” 2. Validate “yangIn” by libyang 3. Generate a YANG json value to represent the target configuration, name it “yangTarget” 4. Do diff between “yangIn” and “yangTarget” 5. Apply the diff to CONFIG DB json and save it back to DB The fix: • For step #1, If value of a leaf-list field string type, transfer it to a list by splitting it with “,” the purpose here is to make step#2 happy. We also need to save <table_name>.<key>.<field_name> to a set named “leaf_list_with_string_value_set”. • For step#5, loop “leaf_list_with_string_value_set” and change those fields back to a string. #### How to verify it 1. Manual test 2. Changed sample config DB and unit test passed
Includes below commits ``` 1477c36 2022-05-04 | Fix: if routestr does not exist, skip (#257) [Qi Luo] 5c08435 2022-05-04 | Add VoQ Recirc interface (i.e., Ethernet-Rec) to interface maps for S… (#244) [Song Yuan] 57f1af6 2022-05-02 | Fix: not to use blocking get_all() after keys() (#255) [Qi Luo] 33fdf9d 2022-04-06 | [RFC2737, RFC3433] Exclude RJ45 port from Entity MIB and Entity sensor MIB (#247) [Kebo Liu] ```
…rvice (#10573) Why I did it The PR is aimed to fix a bug that mgmt port eth0 may loss IP even if user configured static IP of eth0. This is not a always reproduceable issue, the reproducing flow is like: Systemd starts networking service, which runs a dhcp based configuration and assigned an ip from dhcp. Systemd starts interface-config service who depends on networking service Interface-config service runs command “ifdown –force eth0”, check line. but networking service is still running so that this line failed with error: “error: Another instance of this program is already running.”. This error is printed by ifupdown2 lib who is the main process of networking service. So, ifdown actually does not work here, the ip of eth0 is not down. Interface-config service updates /etc/networking/interface to static configuration. Interface-config service runs command “systemctl restart networking”. This command kills the previous networking related processes (log: networking.service: Main process exited, code=killed, status=15/TERM), and try to reconfigure the ip address with static configuration. But it detects that the configured IP and the existing IP are the same, and it does not really configure the ip to kernel. Hence, the ip is still getting from dhcp. (this could be a bug of ifupdown2: previous ip is from dhcp, new ip is a static ip, it treats them as same instead of re-configuring the IP) When the lease of the ip expires, the ip of eth0 is removed by kernel and the issue reproduces. The issue is not always reproduceable because networking service usually runs fast so that it won't hit step#3. How I did it Check networking service state before running "ifdown –force eth0", wait for it done if it is activating. How to verify it Manual test.
Why I did it Support OpenSSL FIPS 140-3, see design doc: https://github.com/Azure/SONiC/blob/master/doc/fips/SONiC-OpenSSL-FIPS-140-3.md. How I did it Install the fips packages. To build the fips packages, see https://github.com/Azure/sonic-fips Azure pipelines: https://dev.azure.com/mssonic/build/_build?definitionId=412 How to verify it Validate the SymCrypt engine: admin@sonic:~$ dpkg-query -W | grep openssl openssl 1.1.1k-1+deb11u1+fips symcrypt-openssl 0.1 admin@sonic:~$ openssl engine -v | grep -i symcrypt (symcrypt) SCOSSL (SymCrypt engine for OpenSSL) admin@sonic:~$
…v7.1.0.0 and MLNX SAI v1.21.1.0 (#10583)
Some places were not correctly setting the HTTPS proxy, and were only setting the HTTP proxy. This was fine until Docker 20.10.10, which then started using `https_proxy` for HTTPS connections. Signed-off-by: Saikrishna Arcot <[email protected]>
Python 2 support for sonic-pcied was removed, and the Python 2 version of the variable no longer exists. Signed-off-by: Saikrishna Arcot <[email protected]>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <[email protected]> Why I did it submodule update for the following commits 7a203b1 [chassis] Add new tables in counter db for Voq counter support. (#530) 5effea3 add new table schema for bgp profile (#608) 130dca5 [ci] Update azure pipeline branch variable reference. 708ed39 [ci] Parameterize pipeline and improve azure pipeline (#599) 9c08456 Added new P4RT tables. (#604)
[master][sonic-linkmgrd] submodule updates df51322 Longxiang Lyu Fri May 6 10:01:46 2022 +0800 Add `ActiveActiveStateMachine` implementation (#64) e721ceb Jing Zhang Wed May 4 10:07:14 2022 -0700 Add doc for default route related changes (#63) 7bb06fb Jing Zhang Tue May 3 09:48:28 2022 -0700 Add Cli support to enable or disable default route related feature (#68) e4b02cb Jing Zhang Mon May 2 13:27:54 2022 -0700 Reset WaitActiveUp count before switching to active (#70) 212d960 Jing Zhang Wed Apr 27 10:35:05 2022 -0700 lower log level to warning (#69) 48abc9e Jing Zhang Thu Apr 14 16:50:04 2022 -0700 Add support to enable switchover time measurement (with link prober interval decreased to 10ms) feature (#61) c4858a6 Jing Zhang Thu Apr 14 11:27:55 2022 -0700 Avoid proactively switching to `active` if default route is missing (#62) sign-off: Jing Zhang [email protected]
#### Why I did it This function is critical for is_multi_asic() and SonicDBConfig initializing. No explicit reading ConfigDB. Otherwise it will implicitly trigger SonicDBConfig initializing. #### How I did it 1. No explicit reading ConfigDB in get_asic_conf_file_path() 2. Collect asic_conf_path_candidates lazily to prevent any unnecessary side effect and improve the performance
#### Why I did it To pick up new commits: * 60d2467 Add depends to p4rt debian package #### How I did it update sonic-p4rt/sonic-pins submodule pointer #### How to verify it should be able to build with p4rt enabled.
…0770) Add dependencies device/*
Signed-off-by: Ze Gan <[email protected]> #### Why I did it The SSCI is wrong in the output of MACsec so that the virtual SAI cannot parse the output corretly. The wrong output: ``` 142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off cipher suite: GCM-AES-XPN-256, using ICV length 16 TXSC: 5254008f4f1c0001 on SA 0 0: PN 103, state on, key 12cbc4b64e26c9a1ba14d810da20d16e SSCI 33554432, RXSC: 525400edac5b0001, state on 0: PN 107, state on, key 12cbc4b64e26c9a1ba14d810da20d16e offload: off ``` Expected ``` 142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off cipher suite: GCM-AES-XPN-256, using ICV length 16 TXSC: 5254008f4f1c0001 on SA 0 0: PN 252, state on, SSCI 33554432, key 12cbc4b64e26c9a1ba14d810da20d16e RXSC: 525400edac5b0001, state on 0: PN 264, state on, key 12cbc4b64e26c9a1ba14d810da20d16e ``` #### How I did it Move SSCI before the key so that SSCI will not be the front of SC information.
Why I did it The image size is too large, when there are multiple lazy packages and multiple platforms. It is not necessary to keep the lazy installation packages in multiple copies. For cisco image, the image size will reduce from 3.5G to 1.7G. How I did it Use symbol links to only keep one package for each of the lazy package. Make a new folder fsroot/platform/common Copy the lazy packages into the folder. When using a package in each of the platform, such as x86_64-grub, x86_64-8800_rp-r0, x86_64-8201_on-r0, etc, only make a symbol link to the package in the common folder.
* [PDDF] Rename temp for 7816/7326/7726 Signed-off-by: Jostar Yang <[email protected]> * Change naming to pddf device Co-authored-by: Jostar Yang <[email protected]>
* [caclmgrd]Added logic to allow BFD port numbers
Why I did it Fixes some pmon errors/warnings by providing missing configuration files How I did it Add missing pcie.yaml and sensors.conf for supported linecards How to verify it pcie-check should pass sensors should display proper sensor names
… folder (#10777) … folder #### Why I did it Update template to point to configuration.md in yang-model folder.
In Makefile.cache, for $(1)_DEP_PKGS_SHA, the intention is to include the DEP_MOD_SHA and MOD_HASH of each of the current package's dependencies. However, there's a level of dereferencing missing; instead of grabbing the value of $(dfile)_DEP_MOD_SHA, it is literally using the variable name $(dfile)_DEP_MOD_SHA. This means that the value of this variable will not change when some dependency changes. The impact of this is in transitive dependencies. For a specific example, if there is some change in sairedis, then sairedis will be rebuilt (because there's a change within that component), and swss will be rebuilt (because it's a direct dependency), but docker-swss-layer-buster will not get rebuilt, because only the direct dependencies are effectively being checked, and those aren't changing. Signed-off-by: Saikrishna Arcot <[email protected]>
…and pmon to bullseye (#10580) Fixes #9279 - Why I did it Part of larger effort to move all SONiC systems to bullseye - How I did it 1. Update container makefiles with correct dependencies 2. Update container Dockerfile with correct base image 3. Update container Dockerfile with correct apt dependencies 4. Update any other makefiles with dependencies to remove python2 support 5. Minor changes to support bullseye / python3 - How to verify it Run regression on the switch: 1. Verify PTF community tests work 2. Verify syncd runs and all ports come up / pass traffic 3. Verify all platform tests succeed
Signed-off-by: Saikrishna Arcot <[email protected]>
#### Why I did it Created SONiC Yang model for Kdump Tables: KDUMP #### How I did it Defined Yang models for NAT based on Guideline doc: https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md and https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md #### How to verify it Added test cases to verify it.
…moval issue (#10751) Signed-off-by: mlok <[email protected]>
288c2d8 Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161) bce4694 [autoneg] add support for remote speed advertisement (#2124) a73f156 [show][vrf]Fixing show vrf to include vlan subinterface (#2158) 7a06457 [auto_ts] Enable register/de-register auto_ts config for APP Extension (#2139) 083ebcc Add transceiver-info items advertised for cmis-supported moddules (#2135) 0811214 Validate destination port is not LAG (#2053) 6ab1c51 [minigraph] Consume golden_config_db.json while loading minigraph (#2140) c37a957 [Kdump] Remove the duplicate logic if Kdump was disabled (#2128) 1143869 Ordering fix for sfpshow eeprom (#2113) fdb79b8 Allow fw update for other boot type against on the previous "none" boot fw update (#2040) a54a091 [GCU] Supressing YANG errors from libyang while sorting (#1991) fbfa8bc [GCU] Enabling AddRack and adding RemoveRack tests (#2143) d012be9 [Command-Reference] Add CLI docs for route flow counter (#2069) 8c07d59 [Mellanox] [reboot] [asan] stop asan-enabled containers on reboot (#2107) 697aae3 Fix speed parsing when speed is NOT fetched from APPL_DB (#2138) 22a388b [show] fix get routing stack routine (#2137) cb3a047 Support option --ports of config qos reload for reloading ports' QoS and buffer configuration to default (#2125) 154a801 Enhance "config interface type/advertised-type" to be blocked on RJ45 ports (#2112) 3732ac5 Add CLI for route flow counter feature (#2031) 29771e7 [techsupport] improve robustness (#2117) f9dc681 [intfutil] Display RJ45 port and portchannel speed in 'M' instead of 'G' when it's <= 1000M (#2110) 781ae9f [config] Do not enable pfcwd for BmcMgmtToRRouter (#2136) 23e9398 [scripts/fast-reboot] Shutdown remaining containers through systemd (#2133) 576c9ef [scripts/fast-reboot] stop timers in advance (#2131) 4dad79c bugfix: incorrect command for portchannel creation (#2134) c17b1f4 [show][muxcable] Decrease the timeout for show mux status/hwmode (#2130) 49d61f8 [scripts/fast-reboot] cleanup (#2132) 52ca324 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066) 9e2fbf4 Update db_migrator to support `pfcwd_sw_enable` (#2087) 4010bd0 FGNHG CLI changes (#1588) 6bd54d0 Fix 'show mac' output when FDB entry for default vlan is None instead of 1 (#2126)
Signed-off-by: Ze Gan <[email protected]> Existing pools cannot test MACsec scenario, So I add sonictest-sonic-t0 pool that can run MACsec testcases.
Why I did it To upgrade SSD firmware in initramfs while rebooting from SONiC to SONiC and during NOS to SONiC migration. How I did it New option 'ssd-upgrader-part’ is introduced in grub command line, to indicate the partition and its filesystem type in which the SSD firmware updater is present. ‘ssd-upgrader-part’ syntax is ssd-upgrader-part=<partition>,<filesystem type>. Example: ssd-upgrader-part=/dev/sda8,ext4 A new initramfs script ‘ssd-upgrade’ is included in init-premount and it invokes the SSD firmware updater (ssd-fw-upgrade) present in the partition indicated by the boot option 'ssd-upgrader-part' How to verify it In SONiC, the SSD firmware updater is copied to “/host/” directory. Fast-reboot is to be initiated with the ‘-u’ option ([scripts/fast-reboot] Add option to include ssd-upgrader-part boot option with SONiC partition sonic-utilities#2150) After reboot, while booting into SONiC the SSD firmware updater will be executed in initramfs.
…are status' (#10493) Why I did it To include ONIE version in show platform firmware status command output in DellEMC S6100 and Z9332f platforms. How I did it Include ‘ONIE’ in the list of components provided by platform APIs in DellEMC S6100 and Z9332f. Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins in DellEMC S6100.
Why I did it Fixes #10793 How I did it Removed the switch_type validation from the Yang model. How to verify it compile sonic_yang_mgmt-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <[email protected]>
…10806) - Why I did it Platform_reboot files for simx doesn't do aything different apart from calling /sbin/reboot. which is anyway done in the /usr/local/bin/reboot script i.e. the parent script which calls the platform specific reboot scripts if present. Moreover, /sbin/reboot invoked in the platform specific reboot script is a non-blocking call and thus it returns back to the original script (although /sbin/reboot does it job in the background) and we see messages like this. Signed-off-by: Vivek Reddy Karri <[email protected]>
Why I did it Previous subport unit tests uses port channel names like PortChannel01, so for subport name generated PortChannel01.10, it exceeds Linux network interface name 15 char limit. Signed-off-by: Longxiang Lyu [email protected] How I did it Modify PortChannel01 to PortChannel1.
This is part of HLD sonic-net/SONiC#925 #### Why I did it Add link-training support #### How I did it Update SONiC YANG for port link-training support #### Description for the changelog Add "link_training" to sonic-port.yang #### Link to config_db schema for YANG module changes https://github.com/sonic-net/SONiC/wiki/Configuration#port
…to storage (#10820) Why I did it Support to trigger a pipeline to download and publish artifacts to storage and container registry. Support to specify the patterns which docker images to upload. How I did it Pass the pipeline information and the artifact information by pipeline parameters to the pipeline which will be triggered a new build. It is to decouple the artifacts generation and the publish logic, how and where the artifacts/docker images will be published, depends on the triggered pipeline. How to verify it
Why I did it Config db schema generated by minigraph should run yang validation. How I did it Modify run_script to add yang validation. How to verify it Run sonic-config-engine unit test. Signed-off-by: Gang Lv [email protected]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
How I did it
How to verify it
Which release branch to backport (provide reason below if selected)
Description for the changelog
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)