-
Notifications
You must be signed in to change notification settings - Fork 64
Compatible Hardware List
TobKra96 edited this page Jan 21, 2022
·
14 revisions
These tables contain all compatible and incompatible hardware we have tested. If you have a device, that is not listed, please send us your experience.
The column "Compatible" represents if the hardware is compatible ✔️, unknown ❓ or not compatible ❌.
The column "Compatibility confirmed" represents, if we have actually confirmed the compatibility ✔️, or if we have not checked it yet ❌.
These lists are not complete. All data are without warranty.
You will need at least 500 MB RAM.
Model Name | Compatible | Compatibility confirmed | Comment |
---|---|---|---|
Raspberry Pi 4 Model B | ✔️ | ✔️ | Working just fine. Tested with 11+ devices and 1200+ LEDs |
Raspberry Pi 3 Model B+ | ✔️ | ✔️ | Working just fine. Tested with 5+ devices and 500+ LEDs |
Raspberry Pi 3 Model B | ✔️ | ❌ | Not tested, but it could have enough performance. |
Raspberry Pi 3 Model A | ✔️ | ❌ | Not tested, but it could have enough performance. |
Raspberry Pi 2 Model B | ✔️ | ✔️ | Tested by Lemn8. Tested with 300 LEDs -> 60 FPS |
Raspberry Pi Model B+ | ❓ | ❌ | Not tested. We expect, it has not enough performance. |
Raspberry Pi Model A+ | ❓ | ❌ | Not tested. We expect, it has not enough performance. |
Raspberry Pi Zero | ❌ | ✔️ | The program is running, but only with 24 fps. Not recommended. |
Raspberry Pi Zero W | ❌ | ✔️ | The program is running, but only with 24 fps. Not recommended. |
Raspberry Pi Pico | ❌ | ✔️ | The pico is a microcontroller. The program will need a Linux system. |
Raspberry Pi Compute Module | ❓ | ❌ | Not tested. We expect, it has not enough performance. |
Raspberry Pi zero 2 W | ✔️ | ✔️ | Tested by kats. Tested with 143 LEDs -> 60 FPS and 30% CPU |
Model Name | Compatible | Compatibility confirmed | Comment |
---|---|---|---|
ESP8266 | ✔️ | ✔️ | Tested with a Node MCU. Please check your form factor. You will need the RX Pin. |
ESP32 | ❓ | ❌ | Not tested, but could work. The libraries have to be compatible. |
ARDUINO NANO 33 IOT | ❓ | ❌ | Could work, but not tested. |
ARDUINO UNO WIFI REV2 | ❓ | ❌ | Could work, but not tested. |
Arduino Nano | ❌ | ✔️ | The Arduino Nano has no included wifi module. |
Arduino Micro | ❌ | ✔️ | The Arduino Micro has no included wifi module. |
Arduino Uno | ❌ | ✔️ | The Arduino Uno has no included wifi module. |
Arduino Mega | ❌ | ✔️ | The Arduino Mega has no included wifi module. |
Model Name | Compatible | Compatibility confirmed | Comment |
---|---|---|---|
WS2812B | ✔️ Raspberry Pi ✔️ ESP |
✔️ | Works properly. |
WS2815 | ✔️ Raspberry Pi ✔️ ESP |
✔️ | Works properly. |
WS2811 | ✔️ Raspberry Pi ✔️ ESP |
✔️ | Verified by an User. |
WS2813 | ✔️ Raspberry Pi ✔️ ESP |
✔️ | Confirmed by carlyd95 with rpi 4 + esp 8266 |
SK6812 | ✔️ Raspberry Pi ✔️ ESP |
❌ | Not tested, but should work. |
WS2801 | ❌ Raspberry Pi ❌ ESP |
❌ | Not tested yet. The libraries do not provide a clock signal. |
Every microphone or sound card, which is compatible with Linux should work.
Model Name | Compatible | Compatibility confirmed | Comment |
---|---|---|---|
Sabrent AU-MMSA | ✔️ | ✔️ | Works. A little bit noisy and quiet. Tested with Speedlink SPES Clip-On Microphone |
CSL A20613x4 | ✔️ | ✔️ | Works. A little bit noisy and quiet. Tested with Speedlink SPES Clip-On Microphone |
TONOR G11 | ✔️ | ✔️ | My current microphone. Works very good. |
TONOR T30 | ✔️ | ✔️ | Used by flusier |
Hiro Ichos | ✔️ | ✔️ | Works fine. |