Release 1.1.1

Fixed

• Examples are now part of the dev package
• Device lost handling could cause segfaults under certain circumstances

Release 1.1.0

Added

Devices:

• Support for 52U usb-2.0 cameras
• Support for new DFG/HDMI properties

UDev:

• rule to disable usb power management for TIS devices

tcammainsrc:

• own bufferpool
• io-mode property, currently consists out of user-ptr and mmap
• simple virtual camera, set TCAM_VIRTCAM_DEVICES=name0:name1 to generate devices
• Mark GstBuffer with GST_BUFFER_FLAG_CORRUPTED when image is damaged.
  Requires drop-incomplete-buffer=false

tcambin:

• GstChildProxy interface

tcamsrc:

• GstChildProxy interface

tcam-capture:

• Ability to save images
• Ability to save videos

tcam-gigetool:

• check-control command
  Get IP/port that controls the camera

dependency-manager:

• option --ignore for install routine
  Allows preventing dependencies from being installed
• Warning if 'lsb_release' can not be found
• dependency description for Debian 10 (Buster)
• dependency description for Ubuntu 22.10

packaging:

• split development dependencies into own package

Changed

CMake:

• aravis is cloned into the build directory, not into the source tree
• meson is cloned into the build directory, not into the source tree

Fixed

tcammainsrc:

• Locked properties now return TCAM_ERROR_PROPERTY_NOT_WRITEABLE when they are locked and being set.
  Previously they could still be set even when locked.

tcam-capture:

• Property JSON description was not updated when re-opening the dialog
• No more critical warning if camera has no trigger mode

tcam-ctrl:

• Fix help text for --load and --save

tcam-gigetool:

• Fixed misidentification of camera identifier

aravis:

• TriggerMode is now respected when setting formats

cmake:

• TCAM_BUILD_UVC_EXTENSION_LOADER_ONLY build

installation:

• tcamgststatistics.so is now installed into TCAM_INSTALL_LIB

doc:

• TCAM_DOWNLOAD_MESON now has correct default value (ON)

examples:

• 10-metadata.py - example should now load tcamgststatistics.so even when installed
• 02-set-properties.c - pipeline was not freed correctly
• 02-set-properties.py - Catch exception when setting properties
• 06-softwaretrigger.py - Catch exception when setting softwaretrigger

packaging:

• Removed dependencies that are not required for runtime
  Now in separate -dev package

Release 1.0.0

Added

General:

• internal dependency to fmt
• environment variable TCAM_ARV_STREAM_OPTIONS, allows setting of ArvStream options
• environment variable TCAM_GIGE_HEARTBEAT_MS, allows setting the heartbeat timeout
• tiscamera threads now have names for easier identification during debugging.

CMake:

• clang-format definition, call make clang-format for formatting
• cmake flag TCAM_DOWNLOAD_MESON for legacy systems to allow modern aravis installations.
  for the referenced aravis version, meson-version=0.56 is necessary
• Module configuration string to log and version info

GStreamer:

• GstTcamDeviceProvider, see documentation for usage.
• tcamconvert gstreamer conversion element
  replaces tcamwhitebalance and provides color-conversion services.
• tcambin property conversion-element
  Used to select the internal conversion elements.
  Available options are tcamconvert, tcamdutils, tcamdutils-cuda and auto.
• tcambin property available-caps to fetch available device caps
• tcambin/tcamsrc property tcam-device to directly set a GstDevice instance to open
• tcambin/tcamsrc property tcam-properties. GstStructure like description of properties.
  See documentation for more details.
• tcambin/tcamsrc signals device-open/device-close
• support for tcamdutils-cuda
• example on how to retrieve GstMeta data in python
• GstQuery for AcceptCaps and Caps in tcammainsrc

Tools:

• tcam-ctrl --packages - list all installed 'The Imaging Source' packages and their version
• tcam-ctrl --version now lists configured modules

Changed

General:

• property API changed to tcam-property-1.0 (part of tiscamera)
• device list API changed to GstDeviceProvider
• aravis library minimum version is now 0.8.20.
• logging now uses spdlog and is enabled via e.g. GST_DEBUG=tcam*:3
• Filter for DFG/USB2pro. Device will no longer appear in device listings.

CMake:

• output directory for binaries/libraries to /bin and /lib
• installation variables are now all defined in CMakeInstall.cmake
• cmake option TCAM_BUILD_ARAVIS now defaults to ON
• cmake option TCAM_BUILD_DOCUMENTATION now defaults to ON
• cmake option TCAM_ARAVIS_USB_VISION now defaults to ON

GStreamer:

• gstreamer buffers are now marked as "live"
• tcamsrc/tcammainsrc 'do-timestamp' default changed to false.
• tcambin/tcamsrc/tcammainsrc must be in GST_STATE_READY or higher before you can access a device
• tcambin/tcamsrc property-state renamed to tcam-properties-json
• tcambin version tcamdutils does not check for parity anymore,
  but for minimum version to ensure compatability.
• tcamautoexposure gstreamer element - functionality now in tcammainsrc
• tcamwhitebalance gstreamer element - functionality now in tcammainsrc,
  application in tcamconvert/tcamdutils
• tcamautofocus gstreamer element - functionality now in tcammainsrc
• gstreamer resolution ranges now contain a step size
• polarization caps have been renamed, check caps descriptions for new ones

Tools:

• renamed gige-daemon to tcam-gige-daemon for consistency.
• tcam-gigetool rewrite. Now implemented with C++.
  Output has changed.
• tcam-gige-daemon maximum for devices increased to 50.
• tcam-capture rewrite. Now implemented with C++.
  Aimed to be as simple as possible.
  For more complex use cases use tis-measure.
  https://www.theimagingsource.com/support/downloads-for-linux/end-user-software/icmeasureappimage/

Fixed

• "device-lost" notifications could take over 3 minutes for aravis cameras.
  Should now appear within 5 seconds.
• generated debian packages are now installable when no systemd exists.
  This is only relevant when compiling with aravis.

Removed

• gstreamer elements tcamautoexposure, tcamwhitebalance, tcamautofocus
• tcamprop 0.1 API
• firmware-update
  Moved to a separate repository: https://github.com/theimagingsource/tcam-firmware-update
• camera-ip-conf
  Use tcam-gigetool instead.
• tcambin property use-dutils
  Use tcambin property conversion-element instead.
• environment variable TCAM_ARV_PACKET_REQUEST_RATIO, replaced with TCAM_ARV_STREAM_OPTIONS
• environment variable TCAM_LOG, replaced with gstreamer logging category tcam-libtcam
• unmaintained unit tests
• TCAM_LOG environment variable.
  Use GST_DEBUG category tcam-libtcam instead.
• Legacy uvc extension descriptions for uvcdynctrl

Known Issues

• In camera Auto Functions ROI may not correctly lock properties
• In camera Auto Functions ROI Top/Left/Width/Height may not correctly update when using preset
• AFU050: image/jpeg,width=1280,height=960 may cause segfault when used.
  Cause is in external library.
• GstQueryCaps for Usb3Vision devices via aravis does not work correctly

Release 0.14.0

Added

• 'tegra' device type
• support for tcamtegrasrc
• PWL format support

Changed

• Reworked examples to be more applicable to all cameras.
• property state description is now applied when going PAUSE->PLAYING
• Device lost handling for v4l2 cameras when waiting for images.
  Timeout now causes a warning. Device lost will not be triggered!
• examples now have a default gstreamer log level of WARNING
• tcambin writes a warning message to the GstBus when a version
  incompatability with tcamdutils is detected
• New project logo

Fixed

• Using only the type property of tcambin/tcamsrc now works
• Added missing max resolution for DxK AFU420 cameras

Release 0.13.1

Release 0.13.0 had some uncaught problems and was thus skipped.
The listed changes are from 0.12.0 to 0.13.1.

Added

• firmware files
  dfk72uc02_140.euvc
  dmk72uc02_140.euvc
  dfk72uc02_af_146.euvc
  dmk72uc02_af_146.euvc
• tcam-uvc-extension-loader can now be built/installed without other libraries.
  Set cmake option TCAM_BUILD_UVC_EXTENSION_LOADER_ONLY to ON to activate.
• camera-ip-conf can now be built/installed without other libraries.
  Set cmake option TCAM_BUILD_CAMERA_IP_CONF_ONLY to ON to activate.
• firmware-update can now be built/installed without other libraries.
  Set cmake option TCAM_BUILD_FIRMWARE_UPDATE_ONLY to ON to activate.
• tcammainsrc - Replaces tcamsrc in functionality.
• 'pimipi' device type
• 11-device-state example
• CMake switch TCAM_BUILD_NO_GUI to disable all gui build targets and dependency inclusions.
  See documenation for further details.
• Build target minimal to build recommended minimal tiscamera build.
• script dependency-manager as a way to improve dependency handling for users/packaging
• conflicts, provides, replaces fields in Debian package description for tiscamera-tcamprop
• dependency-manager - replacement for install-dependencies.sh
  offers wider range of functionality and allows addressal of different distributions
  See documentation for further details
• C_INCLUDE_PATH to env.sh

Changed

• cmake user options are now all defined in a separate file
• tcam-ctrl --load now accepts files and attempts to load them as json
• gstreamer elements now have the same version string that is used for releases
• tcamsrc is now a wrapper around all potential TIS source elements
• tiscamera and tiscamera-dutils are now version locked. tcambin will log a warning
  when a version mismatch is detected. Use 'use-dutils=true' to overwrite.
  Mismatching version are not supported.
• All gstreamer elements now only use tcamprop for property interactions
• tcam-ctrl now uses tcamsrc for all device interactions
• tcam-capture now uses xvimagesink for display purposes
• All uses of CMAKE_SOURCE_DIR and CMAKE_BINARY_DIR have been replaced by
  internal variables
• Renamed folder for third party libraries from dependencies to external
• Moved dependency descriptions to subfolder dependencies
• Examples now have correct memory handling
• 'Exposure Time (us)' now has category 'Exposure'
• tcambin applies state descriptions when changing to GST_STATE_PLAYING
• debian package name for master branch now contains commit count
• debian package name now contains distribution release to prevent
  confusion about installation problems due to dependencies

Fixed

• dependency description allows usage of libzip4 and libzip5
• gst: Apply bin state when all elements are verified playing
• tcambin: ensure serial and type are always defined
• camera-ip-conf can now correctly write newer firmware versions
• package generation now works under Ubuntu 20.04
• camera-ip-conf/tcam-gigetool now support newer
  firmware files that have correct access control
• Json property descriptions can now be used to set 'button' type properties
• Various memory leaks
• gige-daemon now correctly deletes lock file
• gige-daemon start --no-fork crash when stopping
• serial-type combinations where not always correctly identified.
  Now Aravis and other capitalized strings are converted to lowercase before being
  interpreted.
• tcamsrc (now tcammainsrc) num-buffers delivered buffer where one short
• camera-ip-conf was unable to set name without ip/netmask/gateway
• various documentation errors
• tcam-capture display bug for bools
• tcambin caps negotiations for GRAY16_LE
• multiple memory leaks
• deadlock in tcammainsrc
• device lost no longer fires when using long exposure times
• tcam-ctrl did not correctly verify - combos

Removed

• firmware files
  dfk72uc02_129.euvc
  dfk72uc02_158.euvc
  dmk72uc02_129.euvc
  dmk72uc02_146.euvc
  dmk72uc02_158.euvc
  dmk72uc02_AF_140.euvc
  dmk72uc02_af_144.euvc
  dfk72uc02_AF_140.euvc
• tcambiteater - functionality is no part of tcamdutils element
• tcam-capture lost the following features:
  • zoom
  • pixel color under mouse
  • ROI selection/display via overlay
  • fit-to-view
• tcammainsrc/tcamsrc property camera. Use tcamprop instead.

Known Issues

• Device lost for GigE cameras can be extremely slow.
• Documentation: RemovedInSphinx40Warning: The app.add_javascript() is deprecated.
  Please use app.add_js_file() instead. app.add_javascript(path)
  Not fixed due to sphinx version incompatability on older Ubuntu versions.
• tcam-capture may experience a thread lock when changing format on some systems.
  Reliable reproducability was not possible during testing.

Release 0.12.0

Added

• tcamsrc property 'camera-buffers' Allows modification of the number of buffers the backend uses.
• tcamautoexposure support for GRAY16_LE
• Installation of examples folder in $PREFIX/share/theimagingsource/tiscamera
• property state system tcamsrc and tcambin have the property 'state' containing a JSON string describing the current property/value list.
• tcam-ctrl --load to load property state string
• tcam-ctrl --save to save property state string
• caps definitions for polarization cameras
• TCAM_ARV_PACKET_REQUEST_RATIO environment variable
• tcamsrc now answers latency queries
• example for gstreamer metadata retrieval
• tcamprop function tcam_prop_get_device_serials_backend Retrieves a list of all connected device serial numbers. Appended to the serial number is the backend, separated by a hyphen "-".

Changed

• Reference system is now Ubuntu 18.04 LTS
• Installation of static data is now unified under /usr/share/theimagingsource/tiscamera/
• GRAY8 is now preferred over GRAY16_LE in caps negotiation
• tcamsrc num-buffers default is now -1. This is now identical to v4l2src.
• Log output now only contains the filename and not the absolute path.
• logging timestamp is now YYYY-mm-ddTHH:MM:SS:MS
• aravis version to HEAD of aravis-0.6 branch

Fixed

• gstmetatcamstatistics.h is installed into gstreamer-1.0 include directory
• Various Bugfixes, please refer to the complete changelog

Removed

• tcam-ctrl -s flag for setting formats.
• tcam-ctrl -s flag for setting properties. Replaced with state system.

Known Issues

• On some systems the python3 module installation path is set wrong.
• tcam-capture sometimes has problems with streaming when handling Usb3Vision cameras.

Release 0.11.1

Bugfix for 0.11 Release. For an overview over the fixes, read the Changelog.

Release 0.11.0

v-tiscamera-0.11.0

Changing version to 0.11.0

Release 0.10.0

v-tiscamera-0.10.0

Changing version to 0.10.0

Release Candidate for version 0.10

v-release-candidate-0_9_1-1

Delete unused files