Flsun SR profile

[array81]

I noticed that OrcaSlicer now has profiles for all FLSun printers except the SR.
Does anyone have a working profile with SR? I tried to create it but I don't know the values to assign to the printer (speed per axis, accelerations, ...).
I've read that someone recommends using that of the V400 but I don't think the speeds and accelerations are excessive.
An "official" base profile for SR would also be desirable.

[fr3ak2402]

I've added it to the list and will make it happen this weekend.

[array81]

Good. I've created a profile for my SR, it seems to work but I'm not at all sure I've entered the correct speed and acceleration values.

[fr3ak2402]

Can you send me all the files of your FLSun SR profile? Then I can expand on it and the profile will be ready faster for all the people who use the OrcaSlicer.

[FabiodiN]

are there any news about it?

[array81]

These are my files:
sr.zip
sr2.zip

[fr3ak2402]

So I'm building the Klipper profile from the FLSun SR on top of your files.

The profile of the SR with Marlin is then additional.
Do you have the 90° arc in your profile?

[array81]

In my code in this moment I have only a small arc, about 45 degree.
I think it would be good if the arc started on the left and arrived in the central part after completing a 90 degree angle.

[array81]

These are my gcode.

START
;STARTGCODE M117 Initializing ; Set coordinate modes G90 ; use absolute coordinates M83 ; extruder relative mode ; Reset speed and extrusion rates M200 D0 ; disable volumetric E M220 S100 ; reset speed ; Set initial warmup temps M117 Nozzle preheat M104 S100 ; preheat extruder to no ooze temp M140 S[first_layer_bed_temperature] ; set bed temp M190 S[first_layer_bed_temperature] ; wait for bed final temp M300 S40 P10 ; Bip ; Home M117 Homing G28 ; home all with default mesh bed level ; For ABL users put G29 for a leveling request ; Final warmup routine M117 Final warmup M104 S[first_layer_temperature] ; set extruder final temp M109 S[first_layer_temperature] ; wait for extruder final temp M190 S[first_layer_bed_temperature] ; wait for bed final temp M300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle M300 S0 P250 ; wait between dual beep M300 S440 P200 ; 2nd beep for printer ready G4 S10 ; wait to clean the nozzle M300 S440 P200 ; 3rd beep for ready to start printing ; Prime line routine M117 Printing prime line ;M900 K0; Disable Linear Advance (Marlin) for prime line G92 E0.0; reset extrusion distance G1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area G92 E0.0; reset extrusion distance G1 E2 F1000 ; de-retract and push ooze G3 X38.904 Y-102.668 I54.672 J95.105 E20.999 G3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800 G92 E0.0 G1 E-5 F3000 ; retract 5mm G1 X52.931 Y-96.185 F1000 ; wipe G1 X50.985 Y-97.231 F1000 ; wipe G1 X49.018 Y-98.238 F1000 ; wipe G1 X0 Y-109.798 F1000 G1 E4.8 F1500; de-retract G92 E0.0 ; reset extrusion distance ; Final print adjustments M117 Preparing to print ;M82 ; extruder absolute mode M221 S{if layer_height<0.075}100{else}95{endif} M300 S40 P10 ; chirp M117 Print [input_filename]; Display: Printing started...

END
; printing object ENDGCODE G92 E0.0 ; prepare to retract G1 E-6 F3000; retract to avoid stringing ; Anti-stringing end wiggle {if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up G1 X0 Y120 F3000 ; present print ; Reset print setting overrides G92 E0 M200 D0 ; disable volumetric e M220 S100 ; reset speed factor to 100% M221 S100 ; reset extruder factor to 100% ;M900 K0 ; reset linear acceleration(Marlin) ; Shut down printer M104 S0 ; turn off temperature M140 S0 ; turn off heatbed M107 ; turn off fan M18 S180 ;disable motors after 180s M300 S40 P10 ; Bip M117 Print finish.

LAYER
;BEFORE_LAYER_CHANGE ;[layer_z] G92 E0

This START code draw a 90 degrees arc and I have remove all M200 and M300 code (marlin code) but I need test it. I hope to test it this evening:
;STARTGCODE M117 Initializing ; Set coordinate modes G90 ; use absolute coordinates M83 ; extruder relative mode ; Reset speed and extrusion rates M220 S100 ; reset speed ; Set initial warmup temps M117 Nozzle preheat M104 S100 ; preheat extruder to no ooze temp M140 S[first_layer_bed_temperature] ; set bed temp M190 S[first_layer_bed_temperature] ; wait for bed final temp ; Home M117 Homing G28 ; home all with default mesh bed level ; For ABL users put G29 for a leveling request ; Final warmup routine M117 Final warmup M104 S[first_layer_temperature] ; set extruder final temp M109 S[first_layer_temperature] ; wait for extruder final temp M190 S[first_layer_bed_temperature] ; wait for bed final temp G4 S10 ; wait to clean the nozzle ; Prime line routine M117 Printing prime line ;M900 K0; Disable Linear Advance (Marlin) for prime line G92 E0.0 G1 E-5 F3000 ; retract 5mm ; Lower nozzle and move to start position G1 Z150 G1 X-125 Y0 Z0.4 F3000 ; Extrude about 40 mm by printing a 90 degree arc G3 X0 Y-125 I125 Z0.3 E40 F2700 ; Retract and move nozzle up G92 E0.0 ; reset extrusion distance ; Final print adjustments M117 Preparing to print ;M82 ; extruder absolute mode M221 S{if layer_height<0.075}100{else}95{endif} M117 Print [input_filename]; Display: Printing started...

[array81]

This START code works and draw 90 degrees arc.
;STARTGCODE M117 Initializing ; Set coordinate modes G90 ; use absolute coordinates M82 ; extruder absolute mode ; Reset speed and extrusion rates M220 S100 ; reset speed ; Set initial warmup temps M117 Nozzle preheat M104 S100 ; preheat extruder to nozzle temp M140 S[first_layer_bed_temperature] ; set bed temp M190 S[first_layer_bed_temperature] ; wait for bed final temp ; Home M117 Homing G28 ; home all with default mesh bed level ; Final warmup routine M117 Final warmup M104 S[first_layer_temperature] ; set extruder final temp M109 S[first_layer_temperature] ; wait for extruder final temp M190 S[first_layer_bed_temperature] ; wait for bed final temp G4 S10 ; wait to clean the nozzle ; Prime line routine M117 Printing prime line ;M900 K0; Disable Linear Advance (Marlin) for prime line G92 E0.0 G1 E-5 F3000 ; retract 5mm ; Lower nozzle and move to start position G1 Z150 G1 X-125 Y0 Z0.4 F3000 ; Extrude about 40 mm by printing a 90 degree arc G3 X0 Y-125 I125 Z0.3 E40 F2700 ; Retract and move nozzle up G92 E0.0 ; reset extrusion distance ; Final print adjustments M117 Preparing to print ;M82 ; extruder absolute mode M221 S{if layer_height<0.075}100{else}95{endif} M117 Print [input_filename]; Display: Printing started...

[Father-Mars]

Did we ever get the finished profile? I made one but it's mucccch slower than Cura

[frezeen]

the sr profile from 1.6.4 beta dont work, print dont start.

i speak about this:
https://github.com/fr3ak2402/OrcaSlicer-Profile-Library/tree/main/profiles/FLSun/machine

[fr3ak2402]

Which SR Marlin or Clipper?

I have not finished the profiles yet....

[frezeen]

klipper 0.4
whn u start a print with petg, hotend up to 250, bed stay to 0 and its perm state until u cancel the process. print dont start

[array81]

Why the SR profiles is not inclued inside 1.6.4 version?

[DavideCattaneo97]

Is the profile for the SR still in the works?

[platini76]

I have a big problem using SR with orcaslicer. my print head goes slow and in spurts... hope to use the right word in english.

[nite99a]

Flsun Super Racer
working Orca Slicer Profiles without T0 error msg.
And Profile for esun PLA+
FLSUN.rar

[aleZZ2001]

I tried to import the files but it always gives me 0 imported configs

[blueeagle69]

Very odd.
I'm using the latest Windows version, and both profiles imported without issue.

Hopefully someone on here has an idea on your issue.
Can't imagine there being a difference in profiles for Mac and Windows.

[PaoDuke]

@aleZZ2001 Hi!

I had your same issue.

In Orcaslicer with a generic Marlin settings the same error message that you have show-up.
I solved it first uploading the profile of the FLSUN QQS-PRO and than uploading the config reguarding the FLSUN SR.

Now my question is.. Is this confing for Marlin SR or Klipper SR?
I'm planning to install Klipper on my printer but for now it's stock

[Silenceikillyou]

@PaoDuke i have somewhat working(infill flow rate needs to go up but there is no setting or just slow it down) klipper SR profile, where can i drop it?
edit:added separate comment with my repo with full klipper profile even with the stl(copy from cura) so i dont have to stare on blank circle

[jmichaelwebber]

It is April 2024, the link to the .rar file is broken: 404 Nicht gefunden

[RealRogueCmdr]

Very odd. I'm using the latest Windows version, and both profiles imported without issue.

Hopefully someone on here has an idea on your issue. Can't imagine there being a difference in profiles for Mac and Windows.

I did what you said, importing the QQS-PRO then importing your profile, now i get this when I slice

[jmichaelwebber]

I opened the gcode and found the M117 Print as the last line in the start code. I deleted the line and saved the file. Now the error message does not appear.

[Silenceikillyou]

Here is Klipper SR profile: https://github.com/Silenceikillyou/orca-klipper-sr-profile
EDIT: only 0.2 and PLA

[lucasvsr1]

Flsun Super-Racer Marlin
Flsun SR.zip

[platini76]

Luca really you are using orca with sr and marlin without having speed and other problems? For me it is impossible

[lucasvsr1]

no

[cavapanten77]

Hi platini76,
Could you tell me the difference between the 3 profiles in your zip file? generic\ 0.4\0.20?
Sorry, but I'm new....
Thank you!!!

[RealRogueCmdr]

I have had no issues using orca on FLSun SR. Sean Cormier -=RogueCmdr=- - - *“**I will tell you a great secret, Captain. Perhaps the greatest of all time. The molecules of your body are the same molecules that make up this station, and the nebula outside, that burn inside the stars themselves. We are starstuff. We are the universe made manifest, trying to figure itself out.**”* Paraphrased – Ambassador Delenn, Babylon 5 (1994) -

…

On Mon, Dec 4, 2023 at 3:10 PM platini76 ***@***.***> wrote: Luca really you are using orca with sr and marlin without having speed and other problems? For me it is impossible — Reply to this email directly, view it on GitHub <#1264 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADSDSAMH3SLUMVSHJJIKZMLYHZC7BAVCNFSM6AAAAAAYZPDUFWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TONJYGIYDK> . You are receiving this because you commented.Message ID: ***@***.***>

[lucasvsr1]

added your profiles of your sr if you want

[simonjardine]

I have a Super Racer, running Klipper.. I tried using the v400 profile then adjusting the bed size and height. No luck...
Why isn't the SR under Flsun?
I tried the QQS pro, but still no luck..
I think it's down to having the correct Gcode, i managed to get the print started but then the nozzle started cooling?
I was so close, be nice to try Orca :-)
Cheers!!!
Ideally someone who has an SR on klipper could share there Gcode !!

[Silenceikillyou]

#1264 (comment) full pla profile for orca

[frezeen]

so, can someone do a recap about sr profiles for stock and klipper??

its incredible how a print like this is not officially supported

[goldrakes1970]

I working for this profile

[Silenceikillyou]

just updated the profile profile for orca, now with two versions, one for fast well tuned machines running 200mm/s+ and coservative more stable profile if you just want to print and are little lazy like me thats 150mm/s
https://github.com/Silenceikillyou/orca-klipper-sr-profile

[frezeen]

Thanks for sharing, ill try It soon.

Are both profiles for stock klipperized SR?

[Silenceikillyou]

np, i hope it will work for you, i had some issues with my SR and i think one of the steppers is going to die on me soon(i had to give it max amps to stop skipping at that fast profile and even then it sometimes skipped) and also at least one of the rollers is not in the best shape but its printing good when i limit it to more of a stock settings, its still faster than running marlin plus all the benefits of klipper interface. If yours is in better shape than mine, one of the settings you could definitely lower is the new minimum_cruise_ratio and go a little higher on accel and jerk but i can't test that anymore since i get massive layer shifts because of the stepper if i keep pushing it. I'll keep printing until it dies and then go with a new printer and definely not delta this time.

[Silenceikillyou]

"Are both profiles for stock klipperized SR?"
sorry toraly missed that part, i have cutom effector housing, 5015 cooling fans and OMG V2s extruder

[allenhuffman]

Just trying Orca for the first time, trying to send the same thing to my SR that I sent to the Bambu Lab A1 Mini to compare. (there was a huge quality different between SR Cura and A1 Mini). Do the profiles shared here supercede the ones in the Orca Slicer I just downloaded tonight? I had no luck with the built in - bed temp was showing 45 and nothing was sticking, and I was about to go tweak but decided to search first and ended up here.