Copyright 2007, 2024 Anthony Howe. All rights reserved.
Post4 is a hosted indirect threaded Forth dialect written in C, based on the "Forth 200x Draft 19.1, 2019-09-30". Post4 aims to implement the fewest possible built-in words in C, those that are needed to interact with memory and I/O, leaving the remaining standard words to be implemented in Forth.
usage: post4 [-V][-b file][-c file][-d size][-f size][-i file][-m size]
[-r size][script [args ...]]
-b file open a block file
-c file word definition file; default post4.p4 from $POST4_PATH
-d size data stack size in cells; default 64
-f size float stack size; default 6
-i file include file; can be repeated; searches $POST4_PATH
-m size data space memory in KB; default 128
-r size return stack size in cells; default 64
-V build and version information
If script is "-", read it from standard input.
The environment variable POST4_PATH
provides a colon separated search path for the post4.p4
core word definitions file and include files. If POST4_PATH
is undefined, then an OS specific default path is used. A specific word definition file can be specified with -c
.
By default no block file is opened. Use -b file
to open a block file at start-up; otherwise see BLOCK-OPEN and BLOCK-CLOSE words.
Post4 reads input from standard input and writes to standard output, which can be redirected:
Example 1 - pipe input
echo "123 69 + ." | post4
Example 2 - here document
post4 - hey babe <<EOF
include dumpargs.p4
args .s dropall cr
s\" Hello world (again)!\r\n" type
EOF
Post4 cell size is equivalent to C's intptr_t
, which for most current systems are 64 bits.
- Standard Core Words
- Block File Words
- Double-Cell Words
- File Access Words
- Floating-Point Words
- Memory Words
- String Words
- Tool Words
- THROW Codes
Post4 is written in ISO C11 using only one extension, Labels As Values
, which is supported by gcc
and clang
compilers. Post4 has been built and tested on NetBSD, Cygwin, Alpine Linux, and Rocky Linux.
$ ./configure --help
$ ./configure
$ make test
$ sudo make install
$ post4
JNI support is availble. See the JNI documentation about building, API, and examples.
When Post4 is invoked without a script file argument or redirected input, then the user is presented with an ok
prompt. The user can enter Post4 numbers and words. Pressing the terminal Enter
(Return
) key ends the input line, which will be interpreted. All Post4 words are treated as case-insensitive.
To leave Post4 either type the EOF
terminal character, BYE
, or code BYE-CODE
(where code
is number to return to the user's shell). For those not familiar with Forth, there is a QUIT
word, but it only terminates a running program; it does not return to the host OS.
The default numeric input/output base is decimal (base 10). Setting variable BASE
will change the default radix used for numeric I/O, which can be between between 2 and 36, eg. 16 BASE !
sets hexadecimal. There are four shorthand words BINARY
, OCTAL
, DECIMAL
, and HEX
that set BASE
to 2, 8, 10, or 16 repectively.
Regardless of the current value of BASE
, it is possible to input numbers in one of the four common bases without having to change the value of BASE
. Prefixing a number with %
, 0
(zero), #
, $
or 0x
can set a binary, octal, decimal, or hex value; an optional minus sign given after the prefix to indicate a negative number. For example:
%1111111 = #127 = 0177 = $7f = 0x7f = $000000000000007f
%-1111111 = #-127 = 0-177 = $-7f = 0x-7f = $ffffffffffffff81
When current BASE
is ten (10) its possible to input floating point numbers (provided support is enabled) with a decimal point and/or scientific notation. For example:
0.0 = 0. = 0E0 = 0e0
1.0 = 1. = 1E0 = 1e0 = +1.E0
12.3 = 123E-1
-0.123 = -123e-3
Floating point numbers are placed on the float stack, which is separate from the data and return stacks. Also the float stack is small, though at least six (6) deep. See Floating-Point Words, in particular words f. and fs. to start with.
- Note the double-cell input notation,
1234.
(equivalent to1234 0
), is not supported. - Note the input notation,
123E
, where there is no value following the exponent is not supported.
It is also possible to input a character constant or backslash escape character. Simple use single-quotes around the character or backslash-escape string (see also CHAR
and [CHAR]
). For example:
'A' ASCII upper case A. '_' ASCII underscore.
'b' ASCII lower case B. '\n' ASCII linefeed.
'9' ASCII digit 9.
The following C-style backslash escapes are supported:
\? delete \n linefeed
\\ backslash \r carriage-return
\a bell \s space
\b backspace \t tab
\e escape \v vertical tab
\f formfeed \0 nul
Because Forth uses whitespace for input delimiters, in particular space (ASCII 32), the only way to input a literal space character is with:
32 ASCII numeric value.
'\s' Backslash escape.
BL Forth word, short for blank.
Forth has strings: counted and length prefixed. Counted strings are a carry-over from historical Forth, where the string stored in memory, is prefixed by a length octet, limiting the string length to 255 ASCII octets. The standard Forth character string, when stored in memory, is prefixed with an unsigned numeric length cell. As a Post4 extension, character strings are always NUL terminated as a convenience for interacting with the C library and host OS API.
Some examples of words using strings. Note that the whitespace character (space, tab, newline) immediately after the word, eg. S\"
, delimits the word from the text that follows and is not part of the text:
." some text" Print some text at runtime.
C" counted text" Define a counted string.
." <- space printed" Print textt with leading space.
S" some text" Store some text.
S\" escaped text" Store some escaped text.
.( lots of text) Show some text (now).
ABORT" text message" What I do wrong now?
A demonstration of using CATCH and THROW.
$ post4 -i catch_throw.p4
Enter TRY-IT or RETRY-IT words to test CATCH / THROW.
ok
Simple demonstration on how to access the command line arguments.
$ post4 dumpargs.p4 hello world, tell us more!
There are actually three block editor word sets:
- An
ed(1)
like block line editor usingLIST
,PRINT
, andCHANGE
. - An interactive single line editor using
EDIT
; left & right cursor keys, tab toggles insert or replace mode, delete backspace, ESC quits. - A full "screen" block editor using
ED
; all the commands of the interactive single line editor, plus up & down cursor keys,CTRL+G
goto block,CTRL+P
&CTRL+N
block, andESC
menu.
NOTE: that EDIT
and ED
are hard coded with ANSI terminal escape sequences.
$ post4 -b .post4.blk -i ed.p4
Type ED to start editor.
ok ED
life.p4 - Conway's Game of Life
Rules
The universe of the Game of Life is an infinite two-dimensional orthogonal grid of square cells, each of which is in one of two possible states, live or dead. Every cell interacts with its eight neighbours, which are the cells that are directly horizontally, vertically, or diagonally adjacent. At each step in time, the following transitions occur:
- Any live cell with fewer than two live neighbours dies, as if caused by under population.
- Any live cell with more than three live neighbours dies, as if by overcrowding.
- Any live cell with two or three live neighbours lives on to the next generation.
- Any dead cell with exactly three live neighbours becomes a live cell.
The initial pattern constitutes the seed of the system. The first generation is created by applying the above rules simultaneously to every cell in the seed - births and deaths happen simultaneously, and the discrete moment at which this happens is sometimes called a tick (in other words, each generation is a pure function of the one before). The rules continue to be applied repeatedly to create further generations.
$ post4 life.p4
life1d.p4 - One Dimensional Cellular Atomata
This example demostrates five Wolfram rules 30, 90, 110, 184, and 104 using the same initial state.
$ post4 life1d.p4
Pseudo-random number generators. One is the simple code example from the ISO C11 draft April 12, 2011,
\ Example from the ISO C11 draft April 12, 2011
SRAND ( -- aaddr )
Random number seed variable.
RAND ( -- u )
Return random number between 0..32767.
\ Pseudo-Random Sequence Generator for 32-Bit CPUs
\ Bruce Schneier, Dr. Dobb's Journal, v. 17, n. 2, February 1992, pp. 34-40.
RANDA ( -- aaddr )
RANDB ( -- aaddr )
RANDC ( -- aaddr )
Random number seed variables for three Linear Feedback Shift
Registers.
RANDOMXOR ( bits -- u )
Return random number u generated from bits, XORing the bits from the
three generators.
RANDOMMAJ ( bits -- u )
Return random number u generated from bits, based on the majority of
one or zero returned from the three generators.
Example:
$ post4
ok INCLUDE rand.p4
ok 12345 SRAND !
ok RAND . RAND . RAND . CR
21468 9988 22117
ok 12345 RANDA ! 54321 RANDB ! $deadbeef RANDC !
ok 16 RANDOMXOR U. 16 RANDOMXOR U. 16 RANDOMXOR U. CR
52917 27383 64651
ok 16 RANDOMMAJ U. 16 RANDOMMAJ U. 16 RANDOMMAJ U. CR
7 9885 36906
ok
Hunt The Wumpus game ported from the original BASIC source written by Gregory Yob.
$ post4 -i wumpus.p4
... instructions ...
Type PLAY to start.
ok PLAY
BATS NEARBY
YOU ARE IN ROOM 8
TUNNELS LEAD TO 1 7 9
(S)HOOT OR (M)OVE? M
WHERE TO? 7
ZAP--SUPER BAT SNATCH! ELSEWHEREVILLE FOR YOU!
YOU ARE IN ROOM 13
TUNNELS LEAD TO 12 14 20
(S)HOOT OR (M)OVE? M
WHERE TO? 14
I SMELL A WUMPUS!
YOU ARE IN ROOM 14
TUNNELS LEAD TO 4 13 15
(S)HOOT OR (M)OVE?
Forth 200x
http://www.forth200x.org/
Forth Standard
https://forth-standard.org/
Forth Discussions
https://github.com/ForthHub/discussion/discussions
Forth
https://en.wikipedia.org/wiki/Forth_(programming_language)
Starting Forth
https://www.forth.com/starting-forth/