-
Notifications
You must be signed in to change notification settings - Fork 0
uMMC Electrical Characteristics
Brett Hagman edited this page Aug 9, 2015
·
1 revision
| Characteristic | Absolute Maximum |
|---|---|
| Operating Temperature | -55°C to +125°C |
| Storage Temperature | -65°C to +150°C |
| Voltage on any pin | -0.5V to Vcc+0.5V |
| Maximum Operating Voltage | 6.0V |
***WARNING***
Exceeding values beyond these absolute maximum values may cause permanent damage to the device and/or card! Operating at absolute maximum rating conditions for extended periods may affect device and/or card reliability.
| Parameter | Min | Typ | Max | Units |
|---|---|---|---|---|
| Power Supply Current | ||||
| Icc: Idle, Vcc=5V, No card | 11 | 15 | mA | |
| Icc: Idle, Vcc=3.3V, No card | 5.5 | 8 | mA | |
| Icc: Idle, Vcc=5V, w/card | 12 | 40+(a) | mA | |
| Icc: Idle, Vcc=3.3V, w/card | 6 | 30+(a) | mA | |
| Icc: Active (R/W), Vcc=5V | 25 | 250(a)(b) | mA | |
| Logic Input Low | -0.5 | 0.2 Vcc(c) | V | |
| Logic Input High | 0.6 Vcc(d) | V | ||
| Logic Output Low @ Vcc=5V | 0.7 | V | ||
| Logic Output Low @ Vcc=3.3V | 0.5 | V | ||
| Logic Output High @ Vcc=5V | 4.0 | V | ||
| Logic Output High @ Vcc=3.3V | 2.2 | V |
(a) Because card active and idle current values vary widely from brand to brand, a maximum cannot be determined. Please refer to your card manufacturers specifications for read/write current consumption values.
(b) This is the maximum current that the on-board LDO regulator will supply. Cards that require more power than this are not supported.
(c) "Max" means the highest value where the pin is guaranteed to be read as low.
(d) "Min" means the lowest value where the pin is guaranteed to be read as high.