Skip to content

This is a simple project for k210 with drivers of different camera type,support save image to sd-card by jpeg or bmp.

License

Notifications You must be signed in to change notification settings

PureHing/k210-camera-project

Folders and files

NameName
Last commit message
Last commit date

Latest commit

df6c937 · Sep 28, 2020

History

8 Commits
Sep 21, 2020
Sep 28, 2020
Jul 14, 2020
Sep 28, 2020
Sep 21, 2020
Sep 21, 2020
Sep 21, 2020
Jul 14, 2020
Sep 21, 2020

Repository files navigation

k210-camera-project

This is a simple project for k210 with drivers of different camera type,support save image to sd-card by jpeg or bmp.

Get source code

  • Clone by https link
git clone https://github.com/PureHing/k210-camera-project.git
  • Then get submodules
git submodule update --recursive --init

It will regiter and clone all submodules, if you don't want to register all submodules, cause some modules is unnecessary, just execute

git submodule update --init
# or 
git submodule update --init path_to_submodule
# or
git submodule update --init --recursive path_to_submodule

Install dependencies

Ubuntu for example:

sudo apt update
sudo apt install python3 python3-pip build-essential cmake
sudo pip3 install -r requirements.txt

recommend python3 instead of python2

Check CMake version by

cmake --version

The cmake version should be at least v3.9, if not, please install latest cmake manually from cmake website

Download toolchain

Download the latest toolchain from here, or kendryte-toolchain-ubuntu-amd64-8.2.0-20190409.tar.xz(CDN)

And extract to /opt/kendryte-toolchain/

For example:

wget http://dl.cdn.sipeed.com/kendryte-toolchain-ubuntu-amd64-8.2.0-20190409.tar.xz
sudo tar -Jxvf kendryte-toolchain-ubuntu-amd64-8.2.0-20190409.tar.xz -C /opt
ls /opt/kendryte-toolchain/bin

Configure project

  • Switch path to testproject project director
cd projects/testproject

or

cd projects/dvp2lcd
  • Configure toolchain path

The default toolchain path is /opt/kendryte-toolchain/bin, and default toolchain pfrefix is riscv64-unknown-elf-.

If you have copied toolchain to /opt, just use default.

Or you can customsize your toolchain path by

python project.py --toolchain /opt/kendryte-toolchain/bin --toolchain-prefix riscv64-unknown-elf- config 

And clean config to default by command

python project.py clean_conf
  • Configure project

Usually, just use the default configuration.

If you want to customsize project modules, execute command:

python3 project.py menuconfig

This command will display a configure panel with GUI, then change settings and save configuration.

Build

python3 project.py build

And clean project by:

python3 project.py clean

Clean all build files by:

python3 project.py distclean

The make system is generated from cmake, you MUST run

python3 project.py rebuild

to rebuild make system after you add/delete source files or edit kconfig files

Flash (Burn) to board

For example

python3 project.py -B dan -p /dev/ttyUSB0 -b 1500000 -S flash
or
./download2board.sh

-B means board, -p means board serial device port, -b means baudrate, -S or --Slow means download at low speed but more stable mode.

the configuration saved in .flash_conf.json except args: --sram(-s)、--terminal(-t)、--Slow(-S) You don't need to confiure again the next time you burn firmware, just use:

python3 project.py flash

or

python3 project.py -S flash

More parameters help by :

python3 project.py --help

Others

Build system: refer to c_cpp_project_framework and MF1-SDK

About

This is a simple project for k210 with drivers of different camera type,support save image to sd-card by jpeg or bmp.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published