OSI Sensor Model Packaging specifies ways in which models (like e.g. environmental effect models, sensor models and logical models) using the Open Simulation Interface (OSI) are to be packaged for their use in simulation environments using FMI 2.0. The specification can be found in the doc/osi-sensor-model-packaging_spec.adoc document in this repository.
For more detailed information see the official documentation.
The examples in the directory examples of this repository can be built using CMake. They require that the open-simulation-interface submodule of the repository is populated.
The OSMPDummySource example can be used as a simplistic source of SensorView (including GroundTruth) data, that can be connected to the input of an OSMPDummySensor model, for simple testing and demonstration purposes.
The OSMPCNetworkProxy example demonstrates a simple C network proxy that can send and receive OSI data via TCP sockets.
The OSMPDummySensor example can be used as a simple dummy sensor model, demonstrating the use of OSI for sensor models consuming SensorView data and generating SensorData output.
Install cmake 3.10.2:
$ sudo apt-get install cmakeInstall protobuf 3.0.0:
$ sudo apt-get install libprotobuf-dev protobuf-compiler$ git clone https://github.com/OpenSimulationInterface/osi-sensor-model-packaging.git
$ cd osi-sensor-model-packaging
$ git submodule update --init
$ cd examples
$ mkdir -p build
$ cd build
$ cmake ..
$ cmake --build .