fix(utils): handle cross-device (EXDEV) link in atomic_replace() - #9
Merged
Conversation
…te + cell_size_check + synchronous=FULL) Production corruption #6 left b-tree pages with zeroed headers but intact old cell content — the Bug E pattern. This fix applies three pragma calls on every connect(): - synchronous=FULL (was NORMAL): closes the WAL-checkpoint reordering window where a crash between WAL commit and main-DB write leaves a partially-written b-tree page header. Cost is <1ms per commit on local SSD; negligible at kanban write volume. - secure_delete=ON: forces SQLite to zero freed page bytes on disk. If a torn write or hardware fault later corrupts a page, the underlying cell content is zero, so corruption is detectable and no stale rows can resurface as live data. - cell_size_check=ON: adds a read-side guard so corrupt cells surface as errors at read time rather than as silent wrong-data returns. All three are connection-scoped and re-applied on every connect(). secure_delete also writes a persistent flag into the DB header on the first call against a fresh DB, making the protection durable across processes for new DBs. Tests added for all four required cases: each pragma active on a fresh connection, and all three re-applied after close+reopen. Also adds the required negative test (migration path does not reset pragmas).
apply_wal_with_fallback() treated "disk i/o error" as a permanent
WAL-incompatibility marker, identical to "locking protocol" (NFS) and
"not authorized" (FUSE). But EIO during PRAGMA journal_mode=WAL is
typically TRANSIENT — page-cache pressure, brief lock contention,
recoverable storage hiccups — not a permanent filesystem property.
Treating transient EIO as a permanent downgrade signal produces the
mixed-journal-mode-across-processes corruption pattern:
1. Process A opens kanban.db, hits transient EIO on the WAL pragma,
silently downgrades to journal_mode=DELETE.
2. Process B (no EIO) opens the same file moments later and
successfully sets journal_mode=WAL.
3. A writes rollback-journal frames while B writes WAL frames. SQLite
documents this as unsupported and corrupts the file:
https://www.sqlite.org/wal.html ("all connections to the same
database must use the same locking protocol").
This was the root cause of repeated kanban.db corruption on hosts with
multiple gateway processes plus CLI invocations against the same DB
(observed pattern: corruption shortly after gateway startup, after the
process logged "WAL journal_mode unsupported on this filesystem (disk
I/O error) — falling back to journal_mode=DELETE"). The fallback
warning told the truth — fallback DID happen — but the premise
("unsupported on this filesystem") was wrong; the EIO was a one-shot
event and sibling processes successfully used WAL.
Fix has two layers:
1. Remove "disk i/o error" from _WAL_INCOMPAT_MARKERS. EIO now re-raises
so callers can retry instead of silently corrupting the DB. The two
remaining markers ("locking protocol", "not authorized") are
deterministic per filesystem so they remain safe permanent-downgrade
signals.
2. Belt-and-suspenders: before downgrading on ANY marker match, peek the
on-disk journal mode. If the header says WAL, refuse to downgrade and
re-raise the original error. This guards against any future addition
to _WAL_INCOMPAT_MARKERS turning out to be transient in some
environment we haven't yet seen.
Tests:
- tests/test_hermes_state_wal_fallback.py:
* Flipped test_falls_back_on_disk_io_error → test_reraises_on_disk_io_error
asserting EIO is re-raised, not silently swallowed.
* Added test_does_not_downgrade_when_disk_says_wal covering the
on-disk-header safety guard for the existing legitimate markers.
- tests/hermes_cli/test_kanban_db.py:
* test_connect_falls_back_to_delete_on_locking_protocol now uses a
truly-fresh DB (instead of the kanban_home fixture which pre-inits
in WAL). On NFS the very first process touching the file legitimately
downgrades; on a file already in WAL the new guard correctly refuses.
A standalone reproducer lives at /tmp/kanban-stress/repro_bugD_eio_wal_downgrade.py
(not committed): without fix the DB silently flips from WAL to DELETE
mid-process; with fix the EIO surfaces and the file stays WAL.
Refs: Bug D in the kanban-corruption investigation series (Bugs A and C
shipped in ebe7374f3 and e02147d5e respectively). Bug D explains every
corruption incident this week including those that survived A's
single-dispatcher mitigation, because every CLI invocation is a
separate process whose WAL pragma can transiently fail.
When code inside a write_txn block raises an OperationalError that SQLite has already auto-rolled-back (typical for disk I/O error, database is locked, and database disk image is malformed), the explicit ROLLBACK in write_txn.__exit__ itself raises cannot rollback - no transaction is active and the secondary exception replaces the original in the traceback. Operators see a misleading error and lose the diagnostic information they need. Swallow the rollback-time OperationalError so the caller always sees the original cause. Confirmed reproducer: tests/hermes_cli/test_kanban_db.py:: test_write_txn_preserves_original_exception_when_rollback_fails
`detect_crashed_workers` calls `_pid_alive` on every `running` task whose claim is held by this host. The check can transiently return False for a freshly-spawned worker (fork → /proc-visibility lag, or reap-race between SIGCHLD and parent reaping). When a second dispatcher ticks inside that window it reclaims the task and spawns a duplicate worker. Add `DEFAULT_CRASH_GRACE_SECONDS = 30` and an `HERMES_KANBAN_CRASH_GRACE_SECONDS` env-var override. `detect_crashed_workers` skips the liveness check when `time.time() - started_at < grace`. The existing 15-minute claim TTL still reclaims genuinely-crashed workers; grace only suppresses the launch-window false positive. `HERMES_KANBAN_CRASH_GRACE_SECONDS=0` is set on the `kanban_home` fixture in `test_kanban_core_functionality.py` so existing tests that assert immediate reclaim retain pre-fix semantics. Companion to merged PR NousResearch#23442 (`release_stale_claims`, closes NousResearch#23025), which addressed the same multi-dispatcher race in the stale-claim path. Related: NousResearch#20015 (`_pid_alive` false-negative behaviour),
Reads header bytes 28-31 after every COMMIT and compares against actual file size. Raises sqlite3.DatabaseError on torn-extend (actual_pages < page_count). Also sets PRAGMA wal_autocheckpoint=100 in connect(). Refs: NousResearch#31208 (Bug E - same file, coordinate), NousResearch#30973 (wal_autocheckpoint) Refs: NousResearch#30445, NousResearch#30896, NousResearch#30908 (corruption reports)
Reaper now runs at the top of every dispatcher tick regardless of per-board connect() failures. Previously the reaper sat inside dispatch_once after the kanban_db.connect() call — any EIO during connect would skip reaping for that tick, accumulating zombie workers and stale claim_lock rows. Also: reap_worker_zombies now returns the list of reaped pids (the dispatcher logs them) and a test indentation fix. Squashes three sibling commits from PR NousResearch#32301 into one logical change for batch review.
apply_wal_with_fallback() issued PRAGMA journal_mode=WAL on every call,
including connections to DBs already in WAL mode. This triggered the WAL
init code path, causing SQLite to acquire EXCLUSIVE, checkpoint, and unlink
kanban.db-{wal,shm}. Other open connections received (deleted) FDs and
raised sqlite3.OperationalError: disk I/O error.
Add a cheap read probe (PRAGMA journal_mode, no flock/checkpoint/unlink)
before the set-pragma path. If already wal, return early. The set-pragma
and DELETE fallback paths are unchanged.
Closes NousResearch#31158. Addresses root cause that PRs NousResearch#32226 and NousResearch#32322 attempted
via connection-sharing/caching approaches.
The reaper hoist in the prior commit adds an extra `asyncio.to_thread(_kb.reap_worker_zombies)` call at the top of every dispatcher tick (before the per-board work). The existing `test_gateway_dispatcher_disables_corrupt_board_without_traceback` mocks `to_thread` with a 4-call cap that previously matched 2 full dispatch ticks. With the reaper hoist each tick is now 3 `to_thread` calls instead of 2, so the cap is raised to 6 to preserve the same number of dispatch ticks. The `connect == 5` assertion is unchanged. Also add the contributor's `steveonjava@gmail.com` to AUTHOR_MAP alongside `steve@steveonjava.com` so contributor-audit passes for both identities used across the salvaged commits. Salvage follow-up for PR NousResearch#32857.
When config files (e.g. ~/.hermes/config.yaml) are symlinked to a different filesystem — common on WSL where dotfiles live under /mnt/c/ — os.replace() fails with EXDEV (errno 18: Invalid cross-device link). Fall back to shutil.copy2 + os.unlink when EXDEV is raised. copy2 preserves metadata (permissions, timestamps) so the result is equivalent. Non-EXDEV errors (EACCES, etc.) still propagate. This affects all atomic write paths (atomic_yaml_write, atomic_json_write, atomic_roundtrip_yaml_update) since they all route through atomic_replace. Added 4 regression tests: - Direct EXDEV fallback on plain file - EXDEV fallback preserving symlinks - Non-EXDEV errors are not swallowed - End-to-end atomic_yaml_write EXDEV recovery
🔎 Lint report:
|
| Rule | Count |
|---|---|
invalid-argument-type |
2 |
First entries
tests/hermes_cli/test_kanban_db.py:3541: [invalid-argument-type] invalid-argument-type: Argument to function `_append_event` is incorrect: Expected `Connection`, found `FailingConnWrapper`
tests/hermes_cli/test_kanban_db.py:3540: [invalid-argument-type] invalid-argument-type: Argument is incorrect: Expected `Connection`, found `FailingConnWrapper`
✅ Fixed issues: none
Unchanged: 5013 pre-existing issues carried over.
Diagnostics are surfaced as warnings — this check never fails the build.
OmarB97
pushed a commit
that referenced
this pull request
Jul 20, 2026
…, /topup, terminal-billing UX) (NousResearch#51639) * feat(tui): rename /billing slash command to /topup Behavior-preserving rename of the /billing command surface to /topup. Changes: billing.ts → topup.ts (export topupCommands, name 'topup', new help string), registry.ts import+spread updated, billingOverlay.tsx overview header 'Usage credits' → 'Top up credits', billingCommand.test.ts → topupCommand.test.ts with import/lookup/call updated. RPC method names (billing.state, billing.charge, etc.) and component/symbol names unchanged. * refactor(tui): extract overlay primitives to shared module Lift MenuRow, ActionRow, footer, and barCells() out of billingOverlay.tsx into overlayPrimitives.tsx so the upcoming subscriptionOverlay.tsx can import them instead of duplicating. spendBar now calls barCells() — output is byte-identical. Pure behavior-preserving refactor. * feat(tui): add /subscription + /topup CTAs to /usage output Every /usage render now ends with 'Run /subscription to change plan · /topup to add credits' — both the healthy (with-calls) and depleted (no-calls) paths. Strings-only change, no WS1 dependency. * feat(tui): add subscription wire types Add SubscriptionTierOption, SubscriptionStateResponse, and SubscriptionManageLinkResponse to gatewayTypes.ts. Type-only — no usages yet. Mirrors the BillingStateResponse conventions (snake_case, Decimals as strings) and reuses BillingErrorPayload for error mapping. * feat(gateway): add subscription.state + subscription.manage_link RPCs - agent/subscription_view.py: SubscriptionState dataclass + fail-open build_subscription_state() (mirrors billing_view pattern) + get_subscription_manage_link() for the Stripe deep-link. - hermes_cli/nous_billing.py: get_subscription_state() + post_subscription_manage_link() HTTP helpers for the two NAS endpoints (WS1 Phase A/C). The manage-link endpoint raises BillingScopeRequired when Remote-Spending is missing (Phase 4 step-up trigger). - tui_gateway/server.py: _serialize_subscription_state() + subscription.state RPC (fail-open) + subscription.manage_link RPC (returns {ok,kind,url} or typed error envelope via _serialize_billing_error). NOT added to _LONG_HANDLERS — synchronous HTTP round-trip, not a device flow. * feat(tui): add subscription overlay state types + store slot Add SubscriptionScreen, SubscriptionOverlayCtx, SubscriptionOverlayState to interfaces.ts and a 'subscription' slot to OverlayState. Wire it into overlayStore.ts (buildOverlayState + $isBlocked). NOT added to resetFlowOverlays preserve list — flow-scoped like billing, drops on turn end. * feat(tui): build SubscriptionOverlay — overview + confirm + handoff Pure-render Ink component mirroring billingOverlay.tsx's structure. Overview screen covers all 5 states (free-upgradeable, mid-tier, top-tier, not-admin, downgrade-pending) + dunning. Confirm screen is y/n deep-link to Stripe (NO in-terminal charge). Handoff is the transient 'Opening Stripe' screen. Imports shared primitives from overlayPrimitives.tsx. 8 render tests via renderSync covering every state. * feat(tui): add /subscription command + overlay wiring - subscription.ts: SubscriptionOverlayCtx closure (openManageLink, refreshState, requestRemoteSpending) + run handler that fetches subscription.state and opens the overlay. Alias /upgrade. - registry.ts: spread subscriptionCommands into SLASH_COMMANDS. - appOverlays.tsx: render SubscriptionOverlay when overlay.subscription set. - useInputHandlers.ts: Esc closes subscription overlay; promptOverlay OR includes subscription so input is intercepted while open. - subscriptionCommand.test.ts: 4 tests (fetch+open, logged-out sys line, /upgrade alias, /subscription resolves). * fix(tui/subscription): stop saying Stripe in deep-link copy + fix manage link kind type Replace all user-facing 'Stripe' mentions in the /subscription overlay and sys messages with 'your subscription page' — the deep-link target is NAS's own /manage-subscription page, not the Stripe hosted portal. Stripe only legitimately appears later at actual Checkout. Also add 'manage' to the SubscriptionManageLinkResponse.kind union (NAS emits kind:'manage'; was previously missing from the TypeScript type causing silent narrowing errors). * feat(tui/subscription): render cancellation-scheduled note with headline precedence Parse cancelAtPeriodEnd + cancellationEffectiveAt from the NAS contract (camelCase) in the agent parser (_parse_current), emit cancel_at_period_end + cancellation_effective_at from the gateway serializer, extend the SubscriptionStateResponse type, and render a warn note in OverviewScreen: 'Cancels on {date} — your plan stays active until then.' Headline precedence when multiple flags co-occur: past-due > cancel-scheduled > downgrade-pending > active The downgradeNote guard is tightened to suppress when cancel is scheduled, so at most one status line renders at a time. * feat(tui/subscription): team-context screen — redirect to /topup for team orgs Parse the NAS context:'personal'|'team' field (defaults to 'personal' for unknown/missing values), emit it on the gateway wire, add it to SubscriptionStateResponse. When context is 'team', SubscriptionOverlay renders a dedicated read-only screen instead of the tier picker: 'This terminal is connected to {org_name}. Teams run on shared credits — use /topup to add funds. Personal subscriptions live on your personal account.' The screen closes on Enter or Esc. The personal/tier-picker path is unchanged. * fix(subscription): drop manage-link gateway RPC, build URL locally The NAS POST /api/billing/subscription/manage-link endpoint was dropped (it added no server work — the target is the static /manage-subscription page, not a Stripe-minted secret). Build the URL client-side instead: {portal_base}/manage-subscription?org_id=<org.id>. - Remove subscription.manage_link gateway RPC (server.py) - Remove get_subscription_manage_link helper (subscription_view.py) - Remove post_subscription_manage_link (nous_billing.py) - Remove SubscriptionManageLinkResponse type (gatewayTypes.ts) - Add org_id to SubscriptionState + wire through serializer + TS type - openManageLink() builds the URL locally via buildManageUrl(), opens it with the existing openExternalUrl(), no gateway round-trip - Drop targetTierId param from openManageLink (v1 sends everyone to /manage-subscription; no tier deep-link needed) - Fix stale test expectations (Stripe copy → subscription page copy) * chore(subscription): drop unused format_money import * feat(cli): /subscription + /upgrade, /billing→/topup rename, /usage CTAs Add the classic-CLI half of the terminal billing surface to match the TUI: - /subscription (alias /upgrade) command + /topup (renamed /billing, keeps 'billing' as a back-compat alias) in the command registry. - Drop the stale 'billing' entry from _SLACK_VIA_HERMES_ONLY (now cli_only). * feat(subscription): CLI /subscription handler, drop dunning, current:null no-plan - CLI _show_subscription mirrors the TUI overlay (plan read + tier list + usage bar + browser deep-link via subscription_manage_url); credits render as counts. - Adapt to the updated NAS read contract: remove is_past_due/dunning everywhere (a card-failing subscriber returns as a normal plan now), and treat no-plan as current:null (parser returns None) rather than an all-null object. - HERMES_DEV_SUBSCRIPTION_FIXTURE env-driven fixtures + ui-tui fixture harness drive every state (CLI + live TUI) with no portal. Verified against handoff 2026-06-24_subscription-tui-handoff.md. * feat(billing): CF-4 Remote-Spending revoked-terminal UX (NAS PR NousResearch#481) Wire the Remote-Spending gate denial contract end to end: - nous_billing: BillingRemoteSpendingRevoked (403 remote_spending_revoked → reconnect) + BillingSessionRevoked (401 session_revoked → re-login), distinct from insufficient_scope; capture actor/code/recovery; 503 stays transient. - gateway _serialize_billing_error threads the new typed kinds + actor/code/ recovery to the TUI. - TUI renderBillingError: actor-aware revoke copy, kills the spend overlay immediately (no 15-min zombie button), handles session_revoked, the dual- emitted cli_billing_disabled/remote_spending_disabled, role_required, idempotency_conflict; poll treats a mid-poll revoke as ambiguous (check balance before retry), not a failure. - CLI _billing_render_charge_error: same denial matrix, actor-aware copy. Tests: gate-contract mapping + envelope (py) and revoke/session/disabled (TUI). Per handoff 2026-06-24_remote-spending-TUI-contract-handoff.md. * refactor(subscription): remove dead step-up scaffolding from /subscription /subscription only opens a browser deep-link to manage-subscription — that needs no billing scope, so it can never hit insufficient_scope. Drop the never-fired 'stepup' screen type, requestRemoteSpending ctx fn, and resumeScreen bookkeeping (leftovers from a superseded plan). The resumable step-up lives on /topup, where the charge actually gets gated. * feat(tui/topup): resumable 'Allow Remote Spending' step-up on the charge path Phase 4: when a charge returns insufficient_scope, the /topup modal no longer tears down with a 'run /billing again' ConfirmReq. Instead it stays MOUNTED and switches to a step-up screen: - charge() is now awaitable, returning a discriminated outcome (submitted | needs_remote_spending | error) so the overlay can route without closing. - StepUpScreen: 'Allow Remote Spending' → await the device-flow grant (browser opens via the existing out-of-band billing.step_up.verification event) → replay the held charge (pendingCharge.amount) and settle, with no command re-run. Never surfaces the raw billing:manage scope. - armStepUp's fire-and-forget ConfirmReq replaced by requestRemoteSpending(); the leaky 'billing:manage' / 'Re-authorize' / 'run /billing again' copy is gone. Tests: charge-outcome routing, step-up grant/deny, and a render test asserting the step-up copy holds the amount and never leaks billing:manage. Per handoff 2026-06-24_remote-spending-TUI-contract-handoff.md §2 (Grady #6). * feat(billing): shared dollar usage model + two-bar view (drop "credits") Single source of truth for the /usage and /subscription usage bars across TUI + CLI. Reads the NAS account-info dollar fields (subscription/top-up/total remaining, monthly allowance, renewal) and produces a surface-agnostic model: two full-resolution bars (plan allowance + purchased top-up), a status classification (free | healthy | low | depleted), and a human renewal date. - agent/billing_usage.py: UsageModel/UsageBar, usage_model_from_account (fail-open), build_usage_model (HERMES_DEV_CREDITS_FIXTURE-aware), format_renews (ISO -> "Jul 24, 2026", Windows-safe), $5 low-balance threshold. - tui_gateway/server.py: _serialize_usage_model/_serialize_usage_bar, a usage.bars RPC, and the model embedded into subscription.state so the overlay renders the same bars from its single fetch. - Dollars only, never "credits"; two separate bars (not a crammed three-segment one) for legibility at terminal widths. - tests/agent/test_billing_usage.py: status classification, bar math (clamp/over-cap), NaN/Inf rejection, fail-open invariants. * feat(tui): dollar usage bars on /usage + /subscription, drop tier picker Render the shared two-bar dollar model in both overlays; strip "credits" and the in-terminal tier selection per UX feedback. - overlayPrimitives.tsx: UsageBars (themed plan/top-up bars — gold allowance, green top-up) + usageBarsText for the /usage panel. Plan name labels the bar; "$X left of $Y · N% used" (disambiguated so the % matches); top-up "never expires". - subscriptionOverlay.tsx: status line dedupes ($X left once; bar carries the breakdown), human renewal date, state-matched nudges (free upsell / <$5 low alert) with box-safe ASCII markers (! / >) instead of the width-unstable emoji that broke the border. Tier picker removed — overview shows usage + plan, then "Manage on portal" / "Close" (free users get "Start a subscription"). No "credits" anywhere. - session.ts: /usage renders the dollar bars + balance summary, falling back to the legacy credits lines only when the model is unavailable; CTA reworded. - gatewayTypes.ts: UsageModelData/UsageBarData wire types + usage on SessionUsageResponse/SubscriptionStateResponse. - Tests updated to the new contract (no "credits", "left of", dedup, markers). * feat(cli): mirror dollar usage bars on /usage + /subscription CLI parity with the TUI billing rework, from the same shared usage model. - _print_nous_credits_block (/usage) and _subscription_overview render the two-bar dollar view (plan name on the bar, "$X left of $Y · N% used", top-up "never expires", total spendable) instead of the credits-worded block. - Dollars only — dropped the tier catalog (no more "$N/mo (… credits)") and every user-facing "credits"; team copy says "shared balance". - Human renewal date via the shared format_renews; status line dedupes the "$X left"; free upsell + <$5 low alert with ASCII markers. - /subscription manage modal no longer dumps the raw manage-subscription URL in its detail — the [1] Open / [2] Copy link / [3] Cancel options carry it. Title is "Manage your subscription" (no in-terminal plan change). The raw URL stays only in the non-interactive / not-admin fallbacks, which have no menu. - /usage token-usage panel (model, tokens, cost, context) left untouched. * feat(billing): embed dollar usage model into billing.state for /topup The /topup overview renders the same two-bar dollar usage (plan + top-up) as /usage and /subscription. Embed the shared usage model into the billing.state RPC payload (mirrors subscription.state) so the overlay gets the bars from its single fetch, and add the `usage` field to BillingStateResponse. * feat(tui/topup): reorder overview + in-flight reauth with press-Enter resume Reworks the /topup overlay per the Jun 19 review and the no-preflight decision. Overview: - Balance leads in the title ("Top up · balance $X"); the shared two-bar dollar usage (plan + top-up) renders below. Dropped the old monthly-cap spend bar. - "Add funds" is the first action (was "Buy credits"); auto-reload / monthly limit / manage-on-portal follow. Dollars only — no "credits" anywhere. - No "Enable terminal billing" menu item and NO scope preflight: whether the terminal can charge is discovered reactively at pay time. (We deliberately do not read/refresh the OAuth token to gate UI.) Step-up (reached only on a charge's insufficient_scope 403): - New 4-phase flow that keeps the modal mounted: prompt (one-time-setup heads-up) → waiting (browser authorize) → granted (explicit "Press Enter to resume") → replay the held charge → settle. The press-Enter beat is the reassuring "you're back, finish your purchase" moment. - Renamed user copy "Allow Remote Spending" → "Enable terminal billing"; never leaks the raw billing:manage scope (guarded by the render test). - topup.ts error copy de-crufted to terminal-billing wording, emoji removed. Tests: step-up prompt copy, the no-raw-scope invariant, and new overview tests (balance-in-title, Add-funds-first, two-bar usage, no "credits"). * feat(cli/topup): mirror overview reorder + in-flight reauth resume CLI parity with the TUI /topup rehaul, from the same shared usage model. - _billing_overview: balance in the title, the two-bar dollar usage (plan name on the plan bar, top-up "never expires") in place of the old cap spend bar, "Add funds" first, dollars throughout — no "credits", no scope preflight. - _billing_handle_scope_required: now takes the held amount + idempotency key and runs the in-flight flow — "Enable terminal billing" → browser device-flow → re-check the org kill-switch → press-Enter to resume → replay the held charge (reusing the key so a double-submit collapses to one). Stops leaking the raw billing:manage scope. - Charge-error + buy/auto-reload copy de-crufted to terminal-billing/dollars. - Tests updated to the new overview + buy copy. * fix(billing): guard non-JSON 2xx responses in the billing HTTP client A 2xx response with a non-JSON body — e.g. a reverse-proxy / SPA fallback HTML page served when a billing route isn't actually mounted on a deployment — hit json.loads() on the success path of _request() and raised a raw json.JSONDecodeError. That escaped the typed-BillingError contract, so callers' `except BillingError` missed it and fell through to a generic fail-open that rendered as a misleading "not logged in" (observed when /api/billing/subscription was briefly unshipped on staging: 200 text/html, x-matched-path /[...notFound]). Now a non-JSON 2xx body raises a typed BillingError(error="endpoint_unavailable") so surfaces degrade gracefully ("could not load …") instead of crashing or mislabeling a valid session as logged-out. The 4xx/5xx path already guarded its .json(); this closes the same hole on the success path. Test: tests/hermes_cli/test_nous_billing_request.py — non-JSON 2xx → typed error (not JSONDecodeError, not BillingAuthError), empty body → {}, valid JSON parses. * feat(billing/dev): add HERMES_DEV_BILLING_FIXTURE for offline card/scope testing build_billing_state short-circuits to a fixture when HERMES_DEV_BILLING_FIXTURE is set (mirrors HERMES_DEV_CREDITS_FIXTURE for the usage model). States: nocard | card | card-autoreload | notadmin | billing-off | logged-out — so the card-on-file gate, admin role, and kill-switch paths are exercisable offline without a live portal. Env-var gated; returns None when unset (no prod leak). Adds 8 behavior tests asserting the card/admin/billing-on contract per state. * refactor(billing): fold /credits into /topup /credits is redundant now that /topup shows the dollar balance + portal handoff. Make 'credits' (and 'billing') aliases of /topup so typing /credits still works, resolving to topup everywhere (CLI, gateway, Slack, TUI, autocomplete, help). Remove the standalone /credits surface across 6 places: - CLI _show_credits handler + dispatch - gateway _handle_credits_command -> renamed _handle_topup_command, copy softened to 'Manage billing on the portal' (the messaging billing surface; /topup is now gateway-available so messaging keeps billing — credits was the only one before) - TUI commands/credits.ts + creditsCommand.test.ts (deleted), registry entry - tui_gateway credits.view RPC + the CreditsViewResponse type - Slack _SLACK_VIA_HERMES_ONLY: credits -> topup Sweep user-facing /credits -> /topup (usage-block hint, depletion notice) and stale doc-comments. OpenRouter's /credits endpoint URL left untouched. Tests updated (test_credits_folds_into_topup) or pruned for the removed symbols. * fix(billing): card-on-file heads-up, no-card portal gate, /usage bar ordering, modal glyph In-terminal charge (POST /charge against the org's server-held card, no card ref leaves the client): - card present: confirm screen shows 'Your card saved on the portal will be charged' + a 'Manage on portal' escape option (CLI); heads-up line (TUI) - no card on file: /topup overview + buy flow detect it and route to the portal to add a card, instead of offering a charge that 403s no_payment_method /usage bar ordering: route the dollar block through _cprint consistently. The Plan: line (_cprint) and the bar (raw print) flushed to different buffers under patch_stdout and interleaved nondeterministically; now Plan: -> bar -> status/CTA is stable across all states. Modal glyph: strip the leading emoji from bordered _prompt_text_input_modal titles — it measures 1 char but renders 2 columns, shifting the box's right border (the stray '|'). Includes the f-string 'Pay $X?' title. Small /credits -> /topup string bits in cli.py ride along with the surrounding charge edits (the fold lives in the sibling refactor commit). * refactor(billing): apply safe simplify-pass fixes Three low-risk cleanups from a parallel simplify review (reuse/quality/efficiency): - dev fixture portal URL: reuse the prod host (was drifted to staging-* — a real mismatch vs subscription_view's _DEV_FIXTURE_PORTAL) - TUI billingOverlay choose(): collapse two byte-identical branches (needsCard + the not-full else both = portal-or-close at index 0) into one tail; the only divergent path (full && !needsCard → buy/auto/limit) stays explicit - /topup overview comment: correct the stale 'buy_flow detects no_payment_method' note (the overview's no-card gate fires first, so reaching Add funds implies a card on file) Skipped (judgment): the orphaned CreditsView.depleted field (harmless, on a live dataclass), the defensive card gates in _billing_buy_flow/_confirm_and_charge (cheap correct defense on the money path), and folding the no-card handoff into a shared helper (touches 4 money-path sites for tidiness — not worth the risk here). * fix(billing): reactive charge gating — drop card preflight, react to 403 (scope→reauth, no-card→portal) * refactor(billing): drop the /credits alias entirely The /credits fold made it an alias of /topup; now remove that too. Typing /credits is an unknown command, not a silent redirect — billing lives only on /topup (with /billing kept as the old command's back-compat name). Dropped the alias from the registry CommandDef and the TUI topup.ts; updated the test to assert /credits resolves to nothing (no command, no alias). * docs(billing): fix stale comment in _billing_overview — describe reactive no-card path The comment still described the removed overview-level card gate ('no-card case handled above'). Corrected to: the buy flow reacts to the server's no_payment_method 403 and hands off to the portal at charge time (no preflight). * refactor(billing): simplify-pass — share usage-payload helper, drop dead bar wire fields + redundant admin gate * refactor(billing): drop the /billing alias too — /topup is the only billing command Following /credits removal, retire the old /billing name as well. /topup now has NO aliases — both /credits and /billing are unknown commands. Dropped the alias from the registry CommandDef and TUI topup.ts; fixed the one live user-facing straggler (the not-logged-in message said 'then /billing' → /topup) and the _show_billing docstring/default-arg references. Test asserts /topup carries no aliases and neither old name resolves. * fix(billing): code-review fixes — money-path + parity bugs Money path (TUI): - auto-reload "Turn off" now echoes current threshold/top_up_amount so the PATCH succeeds (was sending {enabled:false} → invalid_request → stayed ON) - charge poll honors the 5-min cap on the 429/503 throttle branch too (was rescheduling forever); cap folded into one timedOut() helper - step-up resume reacts to the replay outcome instead of unconditionally closing on a reassuring line with no charge made - synchronous submit guard on Confirm so two key events can't double-charge Gateway: - billing.step_up routes typed errors through _serialize_billing_error (was a raw {error:'error'} dict → generic copy for session_revoked) - billing.state / subscription.state / usage.bars / session.usage moved to _LONG_HANDLERS (blocking portal HTTP no longer stalls the main stdin loop) CLI: - _billing_render_charge_error handles insufficient_scope without leaking the raw billing:manage scope name on a post-grant replay re-raise Python model: - subscription_view tier parse None-coalesces tierOrder/dollarsPerMonth so a free tier's 0 survives ($0, not "—"; correct sort order) TUI parity/robustness: - /usage shows formatted renews_display, not raw ISO renews_at - subscription overview guards a null pending_downgrade_at (was "on null.") - subscription overview surfaces a message instead of silently closing when portal_url is missing - buildManageUrl wraps new URL() so a malformed portal_url can't throw out of the Ink key handler * fix(billing): cross-surface bar direction, formatted cancel/downgrade dates, Slack alias gating - CLI plan bar now fills by REMAINING (fuel-gauge), matching the shared model's fill_fraction, the top-up bar, and the TUI — same account renders identically on both surfaces (#8) - subscription serializer emits cancellation_effective_display / pending_downgrade_display (format_renews); TUI shows 'Jul 1, 2026' not raw ISO (#14b) - _SLACK_VIA_HERMES_ONLY now includes the 'billing' alias so it follows its canonical /topup via /hermes instead of leaking a native Slack slot (#9) * fix(billing): thread idempotency key through the TUI step-up replay (#2) Mint a stable idempotency key when the purchase amount is chosen; it rides pendingCharge into both the Confirm charge and the post-grant step-up replay, so a retried charge dedups server-side (the gateway already echoes the key). A fresh amount selection gets a fresh key. Combined with the sync submit guard, a double-submit now collapses to one charge. * refactor(billing): remove dead /subscription tier-picker scaffolding (#18) The in-terminal plan picker was cut (deep-link only), leaving a whole unreached state machine. Removed end-to-end: - TUI: ConfirmScreen, HandoffScreen, the 'confirm'/'handoff' screen types, pendingTargetTierId, and the now-dead onPatch threading (collapsed the dispatch to a single overview screen + folded the duplicate Box wrapper) - gateway: the tiers serialization + SubscriptionTierOption wire type - model: SubscriptionTier, _parse_tier, _coalesce, _dev_tiers and the tiers field (never displayed on either surface, so this supersedes the tier-parse fix) - tests: dropped the confirm/handoff/tier-passthrough tests; slimmed the overview render tests Net: a large dead-code cull (no behavior change — the picker never ran). * test(billing): parametrize usage-model tests; drop dead is_low/is_free props Collapse the fail-open + status-classification cases into parametrized tables (same coverage, ~80 fewer lines) and remove the now-unused UsageModel.is_low / is_free properties (only a test pinned them). * fix(billing): revert dead 'billing' Slack-via-hermes entry — the alias was dropped #9 was based on a stale review diff: /billing is no longer an alias of /topup (dropped earlier), so routing it via /hermes filtered a name that doesn't exist. * test(billing): cull redundant TUI billing tests (parametrize, merge dupes) usageCommand: collapse 3 CTA tests into one + a panel helper. billingStepUp: merge the two step-up render asserts. topupCommand: parametrize requestRemoteSpending + the revoked-actor pair, drop the redundant happy-path-submitted test. Money-path + error-mapping coverage preserved. * refactor(billing): extract _usage_bar_lines — one source of truth for the CLI bars The plan + top-up bar format was copy-pasted across _print_nous_credits_block, _subscription_overview, and _billing_overview. Extract a helper returning the ready-to-print lines; each caller keeps its own print fn (the _cprint-ordering constraint stays) and resolves its plan-name label. Centralizes the format so the three surfaces can't drift. * feat(billing): NAS V3 subscription-change HTTP client wrappers Add the four write-side wrappers for the V3 subscription contract to nous_billing, each a thin _request() call (reusing auth, JSON, 401-retry, typed errors): - post_subscription_preview → POST /subscription/preview (chargeless quote) - put_subscription_pending_change→ PUT /subscription/pending-change (downgrade/cancel) - delete_subscription_pending_change → DELETE .../pending-change (resume/undo) - post_subscription_upgrade → POST /subscription/upgrade (the money route) pending-change takes a discriminated body (tier_change | cancellation); upgrade requires an Idempotency-Key (mandatory, validated client-side before any I/O). Tests assert the exact method/path/body/header each wrapper puts on the wire. * feat(billing): subscription tier catalog + change-preview models Reinstate the catalog the in-terminal picker needs (was culled when /subscription was deep-link-only): SubscriptionTier + SubscriptionState.tiers + _parse_tier, with _coalesce so the free tier's 0 tierOrder/price survives a falsy-or. Parse the catalog from GET /subscription's tiers and seed _dev_tiers into every fixture. Add SubscriptionChangePreview + subscription_change_preview_from_payload for the POST /preview quote (effect/amountDueNowCents/effectiveAt/reason + tier delta); a malformed/missing effect fails safe to 'blocked' so a bad quote never reads as a charge. Module docstring updated: the overlay is no longer deep-link-only. * feat(billing): gateway RPCs for the V3 subscription change flow Add subscription.preview / .change / .resume / .upgrade RPCs, each wrapping its nous_billing call and reusing _serialize_billing_error for the typed envelope (so a 403 still drives the device step-up). upgrade mints + echoes the idempotency key and surfaces status + recovery_url so the TUI can route an SCA/decline to the portal. Re-add the tier catalog to _serialize_subscription_state (price pre-formatted) for the picker. All four are pool-routed (_LONG_HANDLERS) — preview + upgrade hit Stripe and must not stall the main stdin loop. * feat(billing): in-terminal subscription change flow (TUI) /subscription is no longer deep-link-only: it drives the change in-terminal against the V3 contract via the new gateway RPCs. The overlay is a state machine overview → picker → confirm → result: - picker lists the tier catalog with upgrade/downgrade hints (current + free excluded; free=cancel, on the overview); - confirm shows the previewed effect — pay $X now (upgrade) / scheduled at date (downgrade) / cancel at period end / blocked-with-reason — then applies it; - an upgrade's SCA/decline routes to the portal via the result screen's recovery link; resume/cancel/downgrade are chargeless. Starting a NEW subscription still deep-links (needs a fresh card). insufficient_scope points to /topup (the step-up stays there, not duplicated here). Adds the wire types (tiers + preview/upgrade responses), widens the overlay ctx + screen state, and threads onPatch. Render tests cover every screen. * feat(billing): in-terminal step-up + clearer scheduled-change UX (TUI) Two improvements to the /subscription overlay: Step-up re-auth in place. When a mutation (preview/change/upgrade/resume) returns insufficient_scope, route to a new 'stepup' screen that grants terminal billing via billing.step_up and AUTO-REPLAYS the held action on grant — no bounce to /topup. Scope routing is centralized in previewAndRoute/applyPendingAndRoute/ resumeAndRoute (shared by the picker, confirm, overview + the step-up replay). The browser opens via the shared global verification handler; copy never leaks the raw billing:manage scope. Make a scheduled change unmissable. A downgrade/cancel was one buried warn line that read as 'nothing happened'. Now the overview leads with a banner (⏳ Scheduled change · Ultra ──▶ Plus · <date> · you keep Ultra until then), the status line echoes the transition (Plan: Ultra → Plus), 'Keep <tier> (undo)' is promoted to the first olive action, the result screen says 'your plan doesn't change today', and confirm gets a charged-now / scheduled chip. * feat(billing): full in-terminal subscription change flow in the classic CLI Bring the CLI to parity with the TUI overlay — /subscription is no longer deep-link-only. A paid admin/owner gets picker → preview → confirm → apply, mirroring the /topup buy flow's modal idioms: - _subscription_change_menu (change / undo-or-cancel / manage-on-portal), - _subscription_pick_tier (catalog with upgrade/downgrade hints), - _subscription_preview_and_confirm (POST /preview → effect-aware confirm), - _subscription_apply (schedule / cancel / resume chargeless; upgrade charges the sub's card, SCA/decline → portal), - _subscription_handle_scope_required (insufficient_scope → step_up_nous_billing_scope inline, then replays the held preview/mutation — reusing the upgrade idempotency key). Also the scheduled-change UX fix: the overview leads with a prominent banner (⏳ Scheduled change · Super ──▶ Plus · <date> · you keep Super until then) and the status line echoes the transition, matching the TUI. Members / non-interactive / free still deep-link. Tests drive every branch via a mocked modal + nous_billing. * fix(billing): close TUI subscription money-path holes (ultracode review) - Un-consented charge (P1): the step-up now HOLDS at a 'granted' phase requiring an explicit Continue, and an abortedRef gates the grant's late .then — a cancel during the browser flow can no longer replay the held upgrade + charge. - Missing idempotency key (P2): mint it when building an upgrade 'pending' so it rides into confirm AND the step-up replay (was always undefined → gateway minted a fresh key per call, defeating dedup). - Navigate-away re-charge (P2): confirm 'back' is guarded by submittingRef while an apply is in flight. - Ambiguous charge (P2): a transport-null upgrade is reported as 'may or may not have charged — re-check', never a flat failure that invites a blind retry. - Typed step-up denial (P2): requestRemoteSpending returns {granted,error,message}; the screen maps session_revoked / remote_spending_revoked / rate_limited to the right recovery instead of always 'an admin must allow it'. * fix(billing): close CLI subscription money-path holes (ultracode review) - Bounded step-up (P2): bust the 30s token cache after a grant (it held the pre-grant unscoped token; _request only busts on 401, not 403) and replay ONCE with allow_stepup=False so a still-denied scope can't re-prompt/re-open in a loop. - Stray-keystroke charge (P3→near-P2): the upgrade confirm defaults to 'Go back', not 'Pay ' — a bare Enter can't move money. - Fail-open on unknown effect (P3→near-P2): an unrecognized preview effect now fails SAFE (portal hand-off) instead of scheduling a real PUT. - 'cancel' word collision (P3): the Close row uses value 'close' so typing 'cancel' can't hit it and falsely report 'Cancelled'. - blocked effect re-offers the portal; undo is promoted to the first row when a change is pending (TUI parity). * fix(billing): guard the step-up resume against double-fire (2nd ultracode pass, BUG A) The P1 fix split the auto-replay into a user-triggered resume() on the granted screen, where the default row is the charging action — but resume() had no re-entrancy guard, so a double-Enter fired two replays (the upgrade dedups on the shared key, but schedule/cancel/resume replays carry none → duplicate PUT/DELETEs). Mirror billingOverlay.resume(): flip to a 'resuming' phase + a resumingRef so it fires at most once, and block 'back' once resuming (no re-mount → no second submit). * fix(billing): CLI charge-route ambiguous-charge caveat (2nd ultracode pass, BUG B) The TUI hardened upgradeResult(null) but the CLI charging route did not: a transport/timeout/500 (or unknown 2xx status) on post_subscription_upgrade — after NAS may have already prorated + charged — printed a flat failure, and a manual re-run mints a FRESH idempotency key the server can't dedup → a real second charge. Now the charge route reports 'your card may or may not have been charged — re-run /subscription to check before trying again' and steers away from a blind retry (the CLI can't persist the key across a command re-run). Also thread allow_stepup through the preview→apply replay (BUG C.1) and route the requires_action/ payment_failed portal lines through _cprint for deterministic ordering. * fix(billing): cap the TUI step-up replay to avoid a resume-deadlock (final pass, R1) The round-2 resume guard ('resuming' phase + resumingRef) could deadlock: on a REPEAT insufficient_scope during the post-grant replay, the route helpers did onPatch({screen:'stepup'}) — a no-op since we're already mounted on stepup (no key → no remount) — leaving phase='resuming'/resumingRef=true frozen on 'Applying your change…'. Thread allowStepUp through previewAndRoute/applyPendingAndRoute/ resumeAndRoute; the resume() replay passes false, so a repeat scope denial surfaces a 'still isn't enabled' result instead (mirrors the CLI's allow_stepup=False cap). Also: applyPendingAndRoute(pending=null) now routes to overview, not a stranded Promise.resolve(). * fix(billing): narrow the CLI ambiguous-charge catch to indeterminate outcomes (final pass, R2) The round-2 fix caught EVERY non-scope BillingError as 'may or may not have been charged' — but typed pre-charge rejections (BillingRateLimited 429, BillingSessionRevoked 401, BillingRemoteSpendingRevoked 403, role_required/no_payment_method 4xx) never reached Stripe, so the ambiguity copy was wrong and dropped their real recovery hints. Now route those to _subscription_render_error, and reserve the ambiguous copy for genuinely indeterminate outcomes (network_error / endpoint_unavailable / status None / 5xx). Tests: rate-limit stays deterministic; a real transport failure stays ambiguous. * feat(billing): card visibility + guided add-card path in /topup and /subscription Consume the NAS card-resolver contract (card.resolvedVia + chargeability) across both surfaces, degrading cleanly on today's NAS (fields absent → prior behavior): - WHICH card: the payment lines render provenance — 'Visa ····4242 — the card on your subscription' (resolvedVia → label; unknown rung/older NAS → masked card + the old generic line). Link payment methods render the brand alone (last4 is empty — never 'Link ····'). - Presence at a glance: the /topup overview now shows 'Card: …' or 'No saved card on file' for the full-menu case, plus a warning when the resolver marks the card needs_repair (failing auto-reloads) on overview/buy/confirm. - Add-card path: with no card on file, 'Add funds' becomes a guided screen — open the portal billing page, then 'I've added it — check again' re-fetches billing state and continues straight into the purchase (also recovers a transient display miss). Cards are never entered in-terminal. - /subscription upgrade confirm names the exact card ('Visa ····4242 — the card on your subscription — will be charged'), best-effort via billing.state and only when the resolution rung matches what a subscription charge actually uses (subPin/customerDefault, mirroring Stripe's precedence); otherwise the generic line stands. Fail-soft: any lookup error keeps the generic line. - Gateway serializes display/resolved_via/needs_repair; TUI ctx gains refreshState (topup) + fetchCard (subscription); new offline fixtures card-sub / card-repair. Tests: TUI ctx mocks extended; CLI suites cover provenance + repair-warning render, the Link guard, the add-card path (continue-after-recheck + abandon), the sub-confirm card line, and keep the confirm-time lookup offline in tests. * fix(billing): consume server canChangePlan, preserve distinct refusal codes, drop dead chargeability - Parse canChangePlan verbatim from NAS payloads into BillingState and SubscriptionState; fall back to the legacy OWNER/ADMIN check only when the server omits the field (FINANCE_ADMIN stops being locked out where NAS authorizes it). Role model updated to the 5-role enum. - Add the autoReload.card union (canonical | distinct | none) end-to-end: parse + gateway serialization, distinct carries payment_method_id/brand/last4 with nullable display fields. - stripe_unavailable (503, transient) and upgrade_cap_exceeded (429, daily cap) now survive to the wire as their own codes instead of collapsing into rate_limited; new exception types subclass BillingRateLimited so existing backoff call sites keep working. - Remove card.chargeability / needs_repair parsing, serialization, fixtures and the cli warning blocks: NAS NousResearch#670 removed the field, so the repair path was permanently dead. The future card-health signal belongs to the NAS W1/W3 work. - Tests: five-role fixtures, canChangePlan override/fallback, all three auto-reload card variants, 429-vs-503 code preservation end-to-end. * feat(tui): render the full NAS billing refusal surface - billingOverlay: divergence notice when auto-refill charges a distinct card (portal deep-link to reconcile); needs_repair warnings removed with the field. - topup: explicit copy for consent_required, org_access_denied, upgrade_cap_exceeded, auto_top_up_disabled_failures and stripe_unavailable (honors retry_after); processing_error is an explicit charge-failure case; transport loss during charge polling now reads as an unconfirmed outcome (check balance before retrying), matching the revocation path. - subscriptionOverlay: branch on upgrade reason, not status, so an SCA-needing upgrade routes to portal verification even while NAS pre-NousResearch#711 labels it payment_failed; after an upgrade, poll subscription state until the tier flips (bounded), rendering applying/still-applying rather than assuming immediacy. - Capability-neutral refusal copy (owner, admin, or finance admin) replaces the stale org admin/owner wording. - gatewayTypes: BillingAutoReload.card union added, needs_repair removed. * docs(billing): client-side billing state and refusal lifecycle table Enumerates, from the code, every billing.state shape and typed refusal the gateway serves and the exact TUI copy + recovery each renders. Acceptance from the billing-integration handoff: no NAS billing state or typed refusal falls through to a generic toast; unknown codes still degrade to the default branch that surfaces the server message.
OmarB97
pushed a commit
that referenced
this pull request
Jul 20, 2026
* feat(tui): rename /billing slash command to /topup
Behavior-preserving rename of the /billing command surface to /topup.
Changes: billing.ts → topup.ts (export topupCommands, name 'topup', new
help string), registry.ts import+spread updated, billingOverlay.tsx
overview header 'Usage credits' → 'Top up credits', billingCommand.test.ts
→ topupCommand.test.ts with import/lookup/call updated. RPC method names
(billing.state, billing.charge, etc.) and component/symbol names unchanged.
* refactor(tui): extract overlay primitives to shared module
Lift MenuRow, ActionRow, footer, and barCells() out of billingOverlay.tsx
into overlayPrimitives.tsx so the upcoming subscriptionOverlay.tsx can
import them instead of duplicating. spendBar now calls barCells() —
output is byte-identical. Pure behavior-preserving refactor.
* feat(tui): add /subscription + /topup CTAs to /usage output
Every /usage render now ends with 'Run /subscription to change plan
· /topup to add credits' — both the healthy (with-calls) and depleted
(no-calls) paths. Strings-only change, no WS1 dependency.
* feat(tui): add subscription wire types
Add SubscriptionTierOption, SubscriptionStateResponse, and
SubscriptionManageLinkResponse to gatewayTypes.ts. Type-only — no
usages yet. Mirrors the BillingStateResponse conventions (snake_case,
Decimals as strings) and reuses BillingErrorPayload for error mapping.
* feat(gateway): add subscription.state + subscription.manage_link RPCs
- agent/subscription_view.py: SubscriptionState dataclass + fail-open
build_subscription_state() (mirrors billing_view pattern) +
get_subscription_manage_link() for the Stripe deep-link.
- hermes_cli/nous_billing.py: get_subscription_state() +
post_subscription_manage_link() HTTP helpers for the two NAS endpoints
(WS1 Phase A/C). The manage-link endpoint raises BillingScopeRequired
when Remote-Spending is missing (Phase 4 step-up trigger).
- tui_gateway/server.py: _serialize_subscription_state() +
subscription.state RPC (fail-open) + subscription.manage_link RPC
(returns {ok,kind,url} or typed error envelope via
_serialize_billing_error). NOT added to _LONG_HANDLERS — synchronous
HTTP round-trip, not a device flow.
* feat(tui): add subscription overlay state types + store slot
Add SubscriptionScreen, SubscriptionOverlayCtx, SubscriptionOverlayState
to interfaces.ts and a 'subscription' slot to OverlayState. Wire it into
overlayStore.ts (buildOverlayState + $isBlocked). NOT added to
resetFlowOverlays preserve list — flow-scoped like billing, drops on
turn end.
* feat(tui): build SubscriptionOverlay — overview + confirm + handoff
Pure-render Ink component mirroring billingOverlay.tsx's structure.
Overview screen covers all 5 states (free-upgradeable, mid-tier,
top-tier, not-admin, downgrade-pending) + dunning. Confirm screen is
y/n deep-link to Stripe (NO in-terminal charge). Handoff is the
transient 'Opening Stripe' screen. Imports shared primitives from
overlayPrimitives.tsx. 8 render tests via renderSync covering every
state.
* feat(tui): add /subscription command + overlay wiring
- subscription.ts: SubscriptionOverlayCtx closure (openManageLink,
refreshState, requestRemoteSpending) + run handler that fetches
subscription.state and opens the overlay. Alias /upgrade.
- registry.ts: spread subscriptionCommands into SLASH_COMMANDS.
- appOverlays.tsx: render SubscriptionOverlay when overlay.subscription set.
- useInputHandlers.ts: Esc closes subscription overlay; promptOverlay OR
includes subscription so input is intercepted while open.
- subscriptionCommand.test.ts: 4 tests (fetch+open, logged-out sys line,
/upgrade alias, /subscription resolves).
* fix(tui/subscription): stop saying Stripe in deep-link copy + fix manage link kind type
Replace all user-facing 'Stripe' mentions in the /subscription overlay and
sys messages with 'your subscription page' — the deep-link target is NAS's
own /manage-subscription page, not the Stripe hosted portal. Stripe only
legitimately appears later at actual Checkout. Also add 'manage' to the
SubscriptionManageLinkResponse.kind union (NAS emits kind:'manage'; was
previously missing from the TypeScript type causing silent narrowing errors).
* feat(tui/subscription): render cancellation-scheduled note with headline precedence
Parse cancelAtPeriodEnd + cancellationEffectiveAt from the NAS contract
(camelCase) in the agent parser (_parse_current), emit cancel_at_period_end
+ cancellation_effective_at from the gateway serializer, extend the
SubscriptionStateResponse type, and render a warn note in OverviewScreen:
'Cancels on {date} — your plan stays active until then.'
Headline precedence when multiple flags co-occur:
past-due > cancel-scheduled > downgrade-pending > active
The downgradeNote guard is tightened to suppress when cancel is scheduled,
so at most one status line renders at a time.
* feat(tui/subscription): team-context screen — redirect to /topup for team orgs
Parse the NAS context:'personal'|'team' field (defaults to 'personal' for
unknown/missing values), emit it on the gateway wire, add it to
SubscriptionStateResponse. When context is 'team', SubscriptionOverlay
renders a dedicated read-only screen instead of the tier picker:
'This terminal is connected to {org_name}. Teams run on shared
credits — use /topup to add funds. Personal subscriptions live
on your personal account.'
The screen closes on Enter or Esc. The personal/tier-picker path is
unchanged.
* fix(subscription): drop manage-link gateway RPC, build URL locally
The NAS POST /api/billing/subscription/manage-link endpoint was dropped
(it added no server work — the target is the static /manage-subscription
page, not a Stripe-minted secret). Build the URL client-side instead:
{portal_base}/manage-subscription?org_id=<org.id>.
- Remove subscription.manage_link gateway RPC (server.py)
- Remove get_subscription_manage_link helper (subscription_view.py)
- Remove post_subscription_manage_link (nous_billing.py)
- Remove SubscriptionManageLinkResponse type (gatewayTypes.ts)
- Add org_id to SubscriptionState + wire through serializer + TS type
- openManageLink() builds the URL locally via buildManageUrl(), opens
it with the existing openExternalUrl(), no gateway round-trip
- Drop targetTierId param from openManageLink (v1 sends everyone to
/manage-subscription; no tier deep-link needed)
- Fix stale test expectations (Stripe copy → subscription page copy)
* chore(subscription): drop unused format_money import
* feat(cli): /subscription + /upgrade, /billing→/topup rename, /usage CTAs
Add the classic-CLI half of the terminal billing surface to match the TUI:
- /subscription (alias /upgrade) command + /topup (renamed /billing, keeps
'billing' as a back-compat alias) in the command registry.
- Drop the stale 'billing' entry from _SLACK_VIA_HERMES_ONLY (now cli_only).
* feat(subscription): CLI /subscription handler, drop dunning, current:null no-plan
- CLI _show_subscription mirrors the TUI overlay (plan read + tier list + usage
bar + browser deep-link via subscription_manage_url); credits render as counts.
- Adapt to the updated NAS read contract: remove is_past_due/dunning everywhere
(a card-failing subscriber returns as a normal plan now), and treat no-plan as
current:null (parser returns None) rather than an all-null object.
- HERMES_DEV_SUBSCRIPTION_FIXTURE env-driven fixtures + ui-tui fixture harness
drive every state (CLI + live TUI) with no portal.
Verified against handoff 2026-06-24_subscription-tui-handoff.md.
* feat(billing): CF-4 Remote-Spending revoked-terminal UX (NAS PR #481)
Wire the Remote-Spending gate denial contract end to end:
- nous_billing: BillingRemoteSpendingRevoked (403 remote_spending_revoked →
reconnect) + BillingSessionRevoked (401 session_revoked → re-login), distinct
from insufficient_scope; capture actor/code/recovery; 503 stays transient.
- gateway _serialize_billing_error threads the new typed kinds + actor/code/
recovery to the TUI.
- TUI renderBillingError: actor-aware revoke copy, kills the spend overlay
immediately (no 15-min zombie button), handles session_revoked, the dual-
emitted cli_billing_disabled/remote_spending_disabled, role_required,
idempotency_conflict; poll treats a mid-poll revoke as ambiguous (check
balance before retry), not a failure.
- CLI _billing_render_charge_error: same denial matrix, actor-aware copy.
Tests: gate-contract mapping + envelope (py) and revoke/session/disabled (TUI).
Per handoff 2026-06-24_remote-spending-TUI-contract-handoff.md.
* refactor(subscription): remove dead step-up scaffolding from /subscription
/subscription only opens a browser deep-link to manage-subscription — that needs
no billing scope, so it can never hit insufficient_scope. Drop the never-fired
'stepup' screen type, requestRemoteSpending ctx fn, and resumeScreen bookkeeping
(leftovers from a superseded plan). The resumable step-up lives on /topup, where
the charge actually gets gated.
* feat(tui/topup): resumable 'Allow Remote Spending' step-up on the charge path
Phase 4: when a charge returns insufficient_scope, the /topup modal no longer
tears down with a 'run /billing again' ConfirmReq. Instead it stays MOUNTED and
switches to a step-up screen:
- charge() is now awaitable, returning a discriminated outcome (submitted |
needs_remote_spending | error) so the overlay can route without closing.
- StepUpScreen: 'Allow Remote Spending' → await the device-flow grant (browser
opens via the existing out-of-band billing.step_up.verification event) →
replay the held charge (pendingCharge.amount) and settle, with no command
re-run. Never surfaces the raw billing:manage scope.
- armStepUp's fire-and-forget ConfirmReq replaced by requestRemoteSpending();
the leaky 'billing:manage' / 'Re-authorize' / 'run /billing again' copy is gone.
Tests: charge-outcome routing, step-up grant/deny, and a render test asserting
the step-up copy holds the amount and never leaks billing:manage.
Per handoff 2026-06-24_remote-spending-TUI-contract-handoff.md §2 (Grady #6).
* feat(billing): shared dollar usage model + two-bar view (drop "credits")
Single source of truth for the /usage and /subscription usage bars across
TUI + CLI. Reads the NAS account-info dollar fields (subscription/top-up/total
remaining, monthly allowance, renewal) and produces a surface-agnostic model:
two full-resolution bars (plan allowance + purchased top-up), a status
classification (free | healthy | low | depleted), and a human renewal date.
- agent/billing_usage.py: UsageModel/UsageBar, usage_model_from_account
(fail-open), build_usage_model (HERMES_DEV_CREDITS_FIXTURE-aware),
format_renews (ISO -> "Jul 24, 2026", Windows-safe), $5 low-balance threshold.
- tui_gateway/server.py: _serialize_usage_model/_serialize_usage_bar, a
usage.bars RPC, and the model embedded into subscription.state so the overlay
renders the same bars from its single fetch.
- Dollars only, never "credits"; two separate bars (not a crammed
three-segment one) for legibility at terminal widths.
- tests/agent/test_billing_usage.py: status classification, bar math
(clamp/over-cap), NaN/Inf rejection, fail-open invariants.
* feat(tui): dollar usage bars on /usage + /subscription, drop tier picker
Render the shared two-bar dollar model in both overlays; strip "credits" and
the in-terminal tier selection per UX feedback.
- overlayPrimitives.tsx: UsageBars (themed plan/top-up bars — gold allowance,
green top-up) + usageBarsText for the /usage panel. Plan name labels the
bar; "$X left of $Y · N% used" (disambiguated so the % matches); top-up
"never expires".
- subscriptionOverlay.tsx: status line dedupes ($X left once; bar carries the
breakdown), human renewal date, state-matched nudges (free upsell / <$5
low alert) with box-safe ASCII markers (! / >) instead of the width-unstable
emoji that broke the border. Tier picker removed — overview shows usage +
plan, then "Manage on portal" / "Close" (free users get "Start a
subscription"). No "credits" anywhere.
- session.ts: /usage renders the dollar bars + balance summary, falling back
to the legacy credits lines only when the model is unavailable; CTA reworded.
- gatewayTypes.ts: UsageModelData/UsageBarData wire types + usage on
SessionUsageResponse/SubscriptionStateResponse.
- Tests updated to the new contract (no "credits", "left of", dedup, markers).
* feat(cli): mirror dollar usage bars on /usage + /subscription
CLI parity with the TUI billing rework, from the same shared usage model.
- _print_nous_credits_block (/usage) and _subscription_overview render the
two-bar dollar view (plan name on the bar, "$X left of $Y · N% used",
top-up "never expires", total spendable) instead of the credits-worded block.
- Dollars only — dropped the tier catalog (no more "$N/mo (… credits)") and
every user-facing "credits"; team copy says "shared balance".
- Human renewal date via the shared format_renews; status line dedupes the
"$X left"; free upsell + <$5 low alert with ASCII markers.
- /subscription manage modal no longer dumps the raw manage-subscription URL
in its detail — the [1] Open / [2] Copy link / [3] Cancel options carry it.
Title is "Manage your subscription" (no in-terminal plan change). The raw URL
stays only in the non-interactive / not-admin fallbacks, which have no menu.
- /usage token-usage panel (model, tokens, cost, context) left untouched.
* feat(billing): embed dollar usage model into billing.state for /topup
The /topup overview renders the same two-bar dollar usage (plan + top-up) as
/usage and /subscription. Embed the shared usage model into the billing.state
RPC payload (mirrors subscription.state) so the overlay gets the bars from its
single fetch, and add the `usage` field to BillingStateResponse.
* feat(tui/topup): reorder overview + in-flight reauth with press-Enter resume
Reworks the /topup overlay per the Jun 19 review and the no-preflight decision.
Overview:
- Balance leads in the title ("Top up · balance $X"); the shared two-bar dollar
usage (plan + top-up) renders below. Dropped the old monthly-cap spend bar.
- "Add funds" is the first action (was "Buy credits"); auto-reload / monthly
limit / manage-on-portal follow. Dollars only — no "credits" anywhere.
- No "Enable terminal billing" menu item and NO scope preflight: whether the
terminal can charge is discovered reactively at pay time. (We deliberately do
not read/refresh the OAuth token to gate UI.)
Step-up (reached only on a charge's insufficient_scope 403):
- New 4-phase flow that keeps the modal mounted: prompt (one-time-setup
heads-up) → waiting (browser authorize) → granted (explicit "Press Enter to
resume") → replay the held charge → settle. The press-Enter beat is the
reassuring "you're back, finish your purchase" moment.
- Renamed user copy "Allow Remote Spending" → "Enable terminal billing"; never
leaks the raw billing:manage scope (guarded by the render test).
- topup.ts error copy de-crufted to terminal-billing wording, emoji removed.
Tests: step-up prompt copy, the no-raw-scope invariant, and new overview tests
(balance-in-title, Add-funds-first, two-bar usage, no "credits").
* feat(cli/topup): mirror overview reorder + in-flight reauth resume
CLI parity with the TUI /topup rehaul, from the same shared usage model.
- _billing_overview: balance in the title, the two-bar dollar usage (plan name
on the plan bar, top-up "never expires") in place of the old cap spend bar,
"Add funds" first, dollars throughout — no "credits", no scope preflight.
- _billing_handle_scope_required: now takes the held amount + idempotency key
and runs the in-flight flow — "Enable terminal billing" → browser device-flow
→ re-check the org kill-switch → press-Enter to resume → replay the held
charge (reusing the key so a double-submit collapses to one). Stops leaking
the raw billing:manage scope.
- Charge-error + buy/auto-reload copy de-crufted to terminal-billing/dollars.
- Tests updated to the new overview + buy copy.
* fix(billing): guard non-JSON 2xx responses in the billing HTTP client
A 2xx response with a non-JSON body — e.g. a reverse-proxy / SPA fallback HTML
page served when a billing route isn't actually mounted on a deployment — hit
json.loads() on the success path of _request() and raised a raw
json.JSONDecodeError. That escaped the typed-BillingError contract, so callers'
`except BillingError` missed it and fell through to a generic fail-open that
rendered as a misleading "not logged in" (observed when /api/billing/subscription
was briefly unshipped on staging: 200 text/html, x-matched-path /[...notFound]).
Now a non-JSON 2xx body raises a typed BillingError(error="endpoint_unavailable")
so surfaces degrade gracefully ("could not load …") instead of crashing or
mislabeling a valid session as logged-out. The 4xx/5xx path already guarded its
.json(); this closes the same hole on the success path.
Test: tests/hermes_cli/test_nous_billing_request.py — non-JSON 2xx → typed
error (not JSONDecodeError, not BillingAuthError), empty body → {}, valid JSON
parses.
* feat(billing/dev): add HERMES_DEV_BILLING_FIXTURE for offline card/scope testing
build_billing_state short-circuits to a fixture when HERMES_DEV_BILLING_FIXTURE
is set (mirrors HERMES_DEV_CREDITS_FIXTURE for the usage model). States:
nocard | card | card-autoreload | notadmin | billing-off | logged-out — so the
card-on-file gate, admin role, and kill-switch paths are exercisable offline
without a live portal. Env-var gated; returns None when unset (no prod leak).
Adds 8 behavior tests asserting the card/admin/billing-on contract per state.
* refactor(billing): fold /credits into /topup
/credits is redundant now that /topup shows the dollar balance + portal handoff.
Make 'credits' (and 'billing') aliases of /topup so typing /credits still works,
resolving to topup everywhere (CLI, gateway, Slack, TUI, autocomplete, help).
Remove the standalone /credits surface across 6 places:
- CLI _show_credits handler + dispatch
- gateway _handle_credits_command -> renamed _handle_topup_command, copy softened
to 'Manage billing on the portal' (the messaging billing surface; /topup is now
gateway-available so messaging keeps billing — credits was the only one before)
- TUI commands/credits.ts + creditsCommand.test.ts (deleted), registry entry
- tui_gateway credits.view RPC + the CreditsViewResponse type
- Slack _SLACK_VIA_HERMES_ONLY: credits -> topup
Sweep user-facing /credits -> /topup (usage-block hint, depletion notice) and
stale doc-comments. OpenRouter's /credits endpoint URL left untouched. Tests
updated (test_credits_folds_into_topup) or pruned for the removed symbols.
* fix(billing): card-on-file heads-up, no-card portal gate, /usage bar ordering, modal glyph
In-terminal charge (POST /charge against the org's server-held card, no card ref
leaves the client):
- card present: confirm screen shows 'Your card saved on the portal will be
charged' + a 'Manage on portal' escape option (CLI); heads-up line (TUI)
- no card on file: /topup overview + buy flow detect it and route to the portal
to add a card, instead of offering a charge that 403s no_payment_method
/usage bar ordering: route the dollar block through _cprint consistently. The
Plan: line (_cprint) and the bar (raw print) flushed to different buffers under
patch_stdout and interleaved nondeterministically; now Plan: -> bar -> status/CTA
is stable across all states.
Modal glyph: strip the leading emoji from bordered _prompt_text_input_modal
titles — it measures 1 char but renders 2 columns, shifting the box's right
border (the stray '|'). Includes the f-string 'Pay $X?' title.
Small /credits -> /topup string bits in cli.py ride along with the surrounding
charge edits (the fold lives in the sibling refactor commit).
* refactor(billing): apply safe simplify-pass fixes
Three low-risk cleanups from a parallel simplify review (reuse/quality/efficiency):
- dev fixture portal URL: reuse the prod host (was drifted to staging-* — a real
mismatch vs subscription_view's _DEV_FIXTURE_PORTAL)
- TUI billingOverlay choose(): collapse two byte-identical branches (needsCard +
the not-full else both = portal-or-close at index 0) into one tail; the only
divergent path (full && !needsCard → buy/auto/limit) stays explicit
- /topup overview comment: correct the stale 'buy_flow detects no_payment_method'
note (the overview's no-card gate fires first, so reaching Add funds implies a
card on file)
Skipped (judgment): the orphaned CreditsView.depleted field (harmless, on a live
dataclass), the defensive card gates in _billing_buy_flow/_confirm_and_charge
(cheap correct defense on the money path), and folding the no-card handoff into a
shared helper (touches 4 money-path sites for tidiness — not worth the risk here).
* fix(billing): reactive charge gating — drop card preflight, react to 403 (scope→reauth, no-card→portal)
* refactor(billing): drop the /credits alias entirely
The /credits fold made it an alias of /topup; now remove that too. Typing
/credits is an unknown command, not a silent redirect — billing lives only on
/topup (with /billing kept as the old command's back-compat name). Dropped the
alias from the registry CommandDef and the TUI topup.ts; updated the test to
assert /credits resolves to nothing (no command, no alias).
* docs(billing): fix stale comment in _billing_overview — describe reactive no-card path
The comment still described the removed overview-level card gate ('no-card case
handled above'). Corrected to: the buy flow reacts to the server's
no_payment_method 403 and hands off to the portal at charge time (no preflight).
* refactor(billing): simplify-pass — share usage-payload helper, drop dead bar wire fields + redundant admin gate
* refactor(billing): drop the /billing alias too — /topup is the only billing command
Following /credits removal, retire the old /billing name as well. /topup now has
NO aliases — both /credits and /billing are unknown commands. Dropped the alias
from the registry CommandDef and TUI topup.ts; fixed the one live user-facing
straggler (the not-logged-in message said 'then /billing' → /topup) and the
_show_billing docstring/default-arg references. Test asserts /topup carries no
aliases and neither old name resolves.
* fix(billing): code-review fixes — money-path + parity bugs
Money path (TUI):
- auto-reload "Turn off" now echoes current threshold/top_up_amount so the
PATCH succeeds (was sending {enabled:false} → invalid_request → stayed ON)
- charge poll honors the 5-min cap on the 429/503 throttle branch too (was
rescheduling forever); cap folded into one timedOut() helper
- step-up resume reacts to the replay outcome instead of unconditionally
closing on a reassuring line with no charge made
- synchronous submit guard on Confirm so two key events can't double-charge
Gateway:
- billing.step_up routes typed errors through _serialize_billing_error (was a
raw {error:'error'} dict → generic copy for session_revoked)
- billing.state / subscription.state / usage.bars / session.usage moved to
_LONG_HANDLERS (blocking portal HTTP no longer stalls the main stdin loop)
CLI:
- _billing_render_charge_error handles insufficient_scope without leaking the
raw billing:manage scope name on a post-grant replay re-raise
Python model:
- subscription_view tier parse None-coalesces tierOrder/dollarsPerMonth so a
free tier's 0 survives ($0, not "—"; correct sort order)
TUI parity/robustness:
- /usage shows formatted renews_display, not raw ISO renews_at
- subscription overview guards a null pending_downgrade_at (was "on null.")
- subscription overview surfaces a message instead of silently closing when
portal_url is missing
- buildManageUrl wraps new URL() so a malformed portal_url can't throw out of
the Ink key handler
* fix(billing): cross-surface bar direction, formatted cancel/downgrade dates, Slack alias gating
- CLI plan bar now fills by REMAINING (fuel-gauge), matching the shared model's
fill_fraction, the top-up bar, and the TUI — same account renders identically
on both surfaces (#8)
- subscription serializer emits cancellation_effective_display /
pending_downgrade_display (format_renews); TUI shows 'Jul 1, 2026' not raw ISO (#14b)
- _SLACK_VIA_HERMES_ONLY now includes the 'billing' alias so it follows its
canonical /topup via /hermes instead of leaking a native Slack slot (#9)
* fix(billing): thread idempotency key through the TUI step-up replay (#2)
Mint a stable idempotency key when the purchase amount is chosen; it rides
pendingCharge into both the Confirm charge and the post-grant step-up replay,
so a retried charge dedups server-side (the gateway already echoes the key).
A fresh amount selection gets a fresh key. Combined with the sync submit guard,
a double-submit now collapses to one charge.
* refactor(billing): remove dead /subscription tier-picker scaffolding (#18)
The in-terminal plan picker was cut (deep-link only), leaving a whole unreached
state machine. Removed end-to-end:
- TUI: ConfirmScreen, HandoffScreen, the 'confirm'/'handoff' screen types,
pendingTargetTierId, and the now-dead onPatch threading (collapsed the dispatch
to a single overview screen + folded the duplicate Box wrapper)
- gateway: the tiers serialization + SubscriptionTierOption wire type
- model: SubscriptionTier, _parse_tier, _coalesce, _dev_tiers and the tiers field
(never displayed on either surface, so this supersedes the tier-parse fix)
- tests: dropped the confirm/handoff/tier-passthrough tests; slimmed the overview
render tests
Net: a large dead-code cull (no behavior change — the picker never ran).
* test(billing): parametrize usage-model tests; drop dead is_low/is_free props
Collapse the fail-open + status-classification cases into parametrized tables
(same coverage, ~80 fewer lines) and remove the now-unused UsageModel.is_low /
is_free properties (only a test pinned them).
* fix(billing): revert dead 'billing' Slack-via-hermes entry — the alias was dropped
#9 was based on a stale review diff: /billing is no longer an alias of /topup
(dropped earlier), so routing it via /hermes filtered a name that doesn't exist.
* test(billing): cull redundant TUI billing tests (parametrize, merge dupes)
usageCommand: collapse 3 CTA tests into one + a panel helper.
billingStepUp: merge the two step-up render asserts.
topupCommand: parametrize requestRemoteSpending + the revoked-actor pair, drop
the redundant happy-path-submitted test. Money-path + error-mapping coverage
preserved.
* refactor(billing): extract _usage_bar_lines — one source of truth for the CLI bars
The plan + top-up bar format was copy-pasted across _print_nous_credits_block,
_subscription_overview, and _billing_overview. Extract a helper returning the
ready-to-print lines; each caller keeps its own print fn (the _cprint-ordering
constraint stays) and resolves its plan-name label. Centralizes the format so
the three surfaces can't drift.
* feat(billing): NAS V3 subscription-change HTTP client wrappers
Add the four write-side wrappers for the V3 subscription contract to nous_billing,
each a thin _request() call (reusing auth, JSON, 401-retry, typed errors):
- post_subscription_preview → POST /subscription/preview (chargeless quote)
- put_subscription_pending_change→ PUT /subscription/pending-change (downgrade/cancel)
- delete_subscription_pending_change → DELETE .../pending-change (resume/undo)
- post_subscription_upgrade → POST /subscription/upgrade (the money route)
pending-change takes a discriminated body (tier_change | cancellation); upgrade
requires an Idempotency-Key (mandatory, validated client-side before any I/O).
Tests assert the exact method/path/body/header each wrapper puts on the wire.
* feat(billing): subscription tier catalog + change-preview models
Reinstate the catalog the in-terminal picker needs (was culled when /subscription
was deep-link-only): SubscriptionTier + SubscriptionState.tiers + _parse_tier, with
_coalesce so the free tier's 0 tierOrder/price survives a falsy-or. Parse the
catalog from GET /subscription's tiers and seed _dev_tiers into every fixture.
Add SubscriptionChangePreview + subscription_change_preview_from_payload for the
POST /preview quote (effect/amountDueNowCents/effectiveAt/reason + tier delta); a
malformed/missing effect fails safe to 'blocked' so a bad quote never reads as a
charge. Module docstring updated: the overlay is no longer deep-link-only.
* feat(billing): gateway RPCs for the V3 subscription change flow
Add subscription.preview / .change / .resume / .upgrade RPCs, each wrapping its
nous_billing call and reusing _serialize_billing_error for the typed envelope
(so a 403 still drives the device step-up). upgrade mints + echoes the
idempotency key and surfaces status + recovery_url so the TUI can route an
SCA/decline to the portal. Re-add the tier catalog to _serialize_subscription_state
(price pre-formatted) for the picker. All four are pool-routed (_LONG_HANDLERS) —
preview + upgrade hit Stripe and must not stall the main stdin loop.
* feat(billing): in-terminal subscription change flow (TUI)
/subscription is no longer deep-link-only: it drives the change in-terminal
against the V3 contract via the new gateway RPCs. The overlay is a state machine
overview → picker → confirm → result:
- picker lists the tier catalog with upgrade/downgrade hints (current + free
excluded; free=cancel, on the overview);
- confirm shows the previewed effect — pay $X now (upgrade) / scheduled at date
(downgrade) / cancel at period end / blocked-with-reason — then applies it;
- an upgrade's SCA/decline routes to the portal via the result screen's recovery
link; resume/cancel/downgrade are chargeless.
Starting a NEW subscription still deep-links (needs a fresh card). insufficient_scope
points to /topup (the step-up stays there, not duplicated here). Adds the wire
types (tiers + preview/upgrade responses), widens the overlay ctx + screen state,
and threads onPatch. Render tests cover every screen.
* feat(billing): in-terminal step-up + clearer scheduled-change UX (TUI)
Two improvements to the /subscription overlay:
Step-up re-auth in place. When a mutation (preview/change/upgrade/resume) returns
insufficient_scope, route to a new 'stepup' screen that grants terminal billing
via billing.step_up and AUTO-REPLAYS the held action on grant — no bounce to
/topup. Scope routing is centralized in previewAndRoute/applyPendingAndRoute/
resumeAndRoute (shared by the picker, confirm, overview + the step-up replay). The
browser opens via the shared global verification handler; copy never leaks the raw
billing:manage scope.
Make a scheduled change unmissable. A downgrade/cancel was one buried warn line
that read as 'nothing happened'. Now the overview leads with a banner
(⏳ Scheduled change · Ultra ──▶ Plus · <date> · you keep Ultra until then), the
status line echoes the transition (Plan: Ultra → Plus), 'Keep <tier> (undo)' is
promoted to the first olive action, the result screen says 'your plan doesn't
change today', and confirm gets a charged-now / scheduled chip.
* feat(billing): full in-terminal subscription change flow in the classic CLI
Bring the CLI to parity with the TUI overlay — /subscription is no longer
deep-link-only. A paid admin/owner gets picker → preview → confirm → apply,
mirroring the /topup buy flow's modal idioms:
- _subscription_change_menu (change / undo-or-cancel / manage-on-portal),
- _subscription_pick_tier (catalog with upgrade/downgrade hints),
- _subscription_preview_and_confirm (POST /preview → effect-aware confirm),
- _subscription_apply (schedule / cancel / resume chargeless; upgrade charges
the sub's card, SCA/decline → portal),
- _subscription_handle_scope_required (insufficient_scope → step_up_nous_billing_scope
inline, then replays the held preview/mutation — reusing the upgrade idempotency key).
Also the scheduled-change UX fix: the overview leads with a prominent banner
(⏳ Scheduled change · Super ──▶ Plus · <date> · you keep Super until then) and the
status line echoes the transition, matching the TUI. Members / non-interactive /
free still deep-link. Tests drive every branch via a mocked modal + nous_billing.
* fix(billing): close TUI subscription money-path holes (ultracode review)
- Un-consented charge (P1): the step-up now HOLDS at a 'granted' phase requiring
an explicit Continue, and an abortedRef gates the grant's late .then — a cancel
during the browser flow can no longer replay the held upgrade + charge.
- Missing idempotency key (P2): mint it when building an upgrade 'pending' so it
rides into confirm AND the step-up replay (was always undefined → gateway minted
a fresh key per call, defeating dedup).
- Navigate-away re-charge (P2): confirm 'back' is guarded by submittingRef while an
apply is in flight.
- Ambiguous charge (P2): a transport-null upgrade is reported as 'may or may not
have charged — re-check', never a flat failure that invites a blind retry.
- Typed step-up denial (P2): requestRemoteSpending returns {granted,error,message};
the screen maps session_revoked / remote_spending_revoked / rate_limited to the
right recovery instead of always 'an admin must allow it'.
* fix(billing): close CLI subscription money-path holes (ultracode review)
- Bounded step-up (P2): bust the 30s token cache after a grant (it held the
pre-grant unscoped token; _request only busts on 401, not 403) and replay ONCE
with allow_stepup=False so a still-denied scope can't re-prompt/re-open in a loop.
- Stray-keystroke charge (P3→near-P2): the upgrade confirm defaults to 'Go back',
not 'Pay ' — a bare Enter can't move money.
- Fail-open on unknown effect (P3→near-P2): an unrecognized preview effect now
fails SAFE (portal hand-off) instead of scheduling a real PUT.
- 'cancel' word collision (P3): the Close row uses value 'close' so typing 'cancel'
can't hit it and falsely report 'Cancelled'.
- blocked effect re-offers the portal; undo is promoted to the first row when a
change is pending (TUI parity).
* fix(billing): guard the step-up resume against double-fire (2nd ultracode pass, BUG A)
The P1 fix split the auto-replay into a user-triggered resume() on the granted
screen, where the default row is the charging action — but resume() had no
re-entrancy guard, so a double-Enter fired two replays (the upgrade dedups on the
shared key, but schedule/cancel/resume replays carry none → duplicate PUT/DELETEs).
Mirror billingOverlay.resume(): flip to a 'resuming' phase + a resumingRef so it
fires at most once, and block 'back' once resuming (no re-mount → no second submit).
* fix(billing): CLI charge-route ambiguous-charge caveat (2nd ultracode pass, BUG B)
The TUI hardened upgradeResult(null) but the CLI charging route did not: a
transport/timeout/500 (or unknown 2xx status) on post_subscription_upgrade — after
NAS may have already prorated + charged — printed a flat failure, and a manual
re-run mints a FRESH idempotency key the server can't dedup → a real second charge.
Now the charge route reports 'your card may or may not have been charged — re-run
/subscription to check before trying again' and steers away from a blind retry
(the CLI can't persist the key across a command re-run). Also thread allow_stepup
through the preview→apply replay (BUG C.1) and route the requires_action/
payment_failed portal lines through _cprint for deterministic ordering.
* fix(billing): cap the TUI step-up replay to avoid a resume-deadlock (final pass, R1)
The round-2 resume guard ('resuming' phase + resumingRef) could deadlock: on a
REPEAT insufficient_scope during the post-grant replay, the route helpers did
onPatch({screen:'stepup'}) — a no-op since we're already mounted on stepup (no key
→ no remount) — leaving phase='resuming'/resumingRef=true frozen on 'Applying your
change…'. Thread allowStepUp through previewAndRoute/applyPendingAndRoute/
resumeAndRoute; the resume() replay passes false, so a repeat scope denial surfaces
a 'still isn't enabled' result instead (mirrors the CLI's allow_stepup=False cap).
Also: applyPendingAndRoute(pending=null) now routes to overview, not a stranded
Promise.resolve().
* fix(billing): narrow the CLI ambiguous-charge catch to indeterminate outcomes (final pass, R2)
The round-2 fix caught EVERY non-scope BillingError as 'may or may not have been
charged' — but typed pre-charge rejections (BillingRateLimited 429, BillingSessionRevoked
401, BillingRemoteSpendingRevoked 403, role_required/no_payment_method 4xx) never
reached Stripe, so the ambiguity copy was wrong and dropped their real recovery hints.
Now route those to _subscription_render_error, and reserve the ambiguous copy for
genuinely indeterminate outcomes (network_error / endpoint_unavailable / status None /
5xx). Tests: rate-limit stays deterministic; a real transport failure stays ambiguous.
* feat(billing): card visibility + guided add-card path in /topup and /subscription
Consume the NAS card-resolver contract (card.resolvedVia + chargeability) across
both surfaces, degrading cleanly on today's NAS (fields absent → prior behavior):
- WHICH card: the payment lines render provenance — 'Visa ····4242 — the card on
your subscription' (resolvedVia → label; unknown rung/older NAS → masked card +
the old generic line). Link payment methods render the brand alone (last4 is
empty — never 'Link ····').
- Presence at a glance: the /topup overview now shows 'Card: …' or 'No saved
card on file' for the full-menu case, plus a warning when the resolver marks
the card needs_repair (failing auto-reloads) on overview/buy/confirm.
- Add-card path: with no card on file, 'Add funds' becomes a guided screen —
open the portal billing page, then 'I've added it — check again' re-fetches
billing state and continues straight into the purchase (also recovers a
transient display miss). Cards are never entered in-terminal.
- /subscription upgrade confirm names the exact card ('Visa ····4242 — the card
on your subscription — will be charged'), best-effort via billing.state and
only when the resolution rung matches what a subscription charge actually
uses (subPin/customerDefault, mirroring Stripe's precedence); otherwise the
generic line stands. Fail-soft: any lookup error keeps the generic line.
- Gateway serializes display/resolved_via/needs_repair; TUI ctx gains
refreshState (topup) + fetchCard (subscription); new offline fixtures
card-sub / card-repair.
Tests: TUI ctx mocks extended; CLI suites cover provenance + repair-warning
render, the Link guard, the add-card path (continue-after-recheck + abandon),
the sub-confirm card line, and keep the confirm-time lookup offline in tests.
* feat(desktop): add desktop-local billing wire types
* feat(desktop): billing gateway API client and refusal taxonomy
* feat(desktop): register billing settings tab with skeleton view
* feat(desktop): wire billing tab to live gateway reads with fail-open states
* feat(desktop): buy-credits charge flow with settlement poller
* fix(desktop): keep About last in settings nav, billing above it
* feat(desktop): auto-refill editing and billing step-up verification flow
* fix(desktop): clamp overdrawn subscription credits and pin USD symbol formatting
* fix(desktop): move billing next to notifications in settings nav
* feat(desktop): usage-bar state colors and dev fixture simulator
* feat(desktop): wide usage bars with top-up bar and refresh affordance
* fix(desktop): disable buy controls without a card, neutral tracks for bar-less usage rows
* polish(desktop): usage-grid alignment, tabular numerals, legible tracks and danger states
* polish(desktop): dithered empty and depleted usage-bar tracks per app bar idiom
* fix(billing): consume server canChangePlan, preserve distinct refusal codes, drop dead chargeability
- Parse canChangePlan verbatim from NAS payloads into BillingState and
SubscriptionState; fall back to the legacy OWNER/ADMIN check only when the
server omits the field (FINANCE_ADMIN stops being locked out where NAS
authorizes it). Role model updated to the 5-role enum.
- Add the autoReload.card union (canonical | distinct | none) end-to-end:
parse + gateway serialization, distinct carries payment_method_id/brand/last4
with nullable display fields.
- stripe_unavailable (503, transient) and upgrade_cap_exceeded (429, daily cap)
now survive to the wire as their own codes instead of collapsing into
rate_limited; new exception types subclass BillingRateLimited so existing
backoff call sites keep working.
- Remove card.chargeability / needs_repair parsing, serialization, fixtures and
the cli warning blocks: NAS #670 removed the field, so the repair path was
permanently dead. The future card-health signal belongs to the NAS W1/W3 work.
- Tests: five-role fixtures, canChangePlan override/fallback, all three
auto-reload card variants, 429-vs-503 code preservation end-to-end.
* feat(tui): render the full NAS billing refusal surface
- billingOverlay: divergence notice when auto-refill charges a distinct card
(portal deep-link to reconcile); needs_repair warnings removed with the field.
- topup: explicit copy for consent_required, org_access_denied,
upgrade_cap_exceeded, auto_top_up_disabled_failures and stripe_unavailable
(honors retry_after); processing_error is an explicit charge-failure case;
transport loss during charge polling now reads as an unconfirmed outcome
(check balance before retrying), matching the revocation path.
- subscriptionOverlay: branch on upgrade reason, not status, so an SCA-needing
upgrade routes to portal verification even while NAS pre-#711 labels it
payment_failed; after an upgrade, poll subscription state until the tier
flips (bounded), rendering applying/still-applying rather than assuming
immediacy.
- Capability-neutral refusal copy (owner, admin, or finance admin) replaces
the stale org admin/owner wording.
- gatewayTypes: BillingAutoReload.card union added, needs_repair removed.
* refactor(shared): move terminal-billing wire types to @hermes/shared
The billing/subscription wire shapes (plus UsageBarData/UsageModelData,
which they reference) move verbatim from ui-tui/src/gatewayTypes.ts into
apps/shared/src/billing-types.ts so the desktop app can share the same
gateway contract. gatewayTypes.ts re-exports every moved name from the
new @hermes/shared/billing subpath, so no ui-tui consumer changes.
The subpath export keeps DOM-less ui-tui from pulling the barrel (whose
WebSocket helpers need the DOM lib). ui-tui also now declares its
@hermes/shared dependency explicitly instead of relying on workspace
hoisting.
* test(cli): pin nous_billing wire-layer status-to-exception mapping
The HTTP layer's error handling had zero coverage through _request:
only 2xx parsing and request shaping were tested, and the mapping cases
in test_remote_spending_gate_contract.py hit _raise_for_error directly.
Adds 19 tests driving _request via a monkeypatched urlopen: the
401-refresh-retry path (success, terminal plain/session_revoked,
idempotency-key preservation, base re-resolution), 403 variants through
the wire, 429/503 retry-after, non-JSON error bodies, 404/502
fallbacks, and URLError normalization.
Two behaviors are pinned as findings rather than fixed: a JSON-body
retryAfter hint is ignored unless the Retry-After header is present,
and a bare socket.timeout propagates uncaught (real urllib wraps
timeouts in URLError before this layer).
* fix(tui_gateway): delete dead credits.view RPC
The handler assigns into an undefined `usage` variable, so any call
would raise NameError (the except swallows the first hit, then the
return re-raises it uncaught). Nothing can reach it: the TUI command
registry removed /credits (pinned by test_credits_command_fully_removed)
and no client sends the RPC. The live credit view is
agent/account_usage.py::build_credits_view via the remote gateway's
/topup command, which is untouched.
* fix(cli): normalize read-phase timeouts to the typed billing error
urlopen wraps connect-phase timeouts in URLError (already mapped to
network_error), but a timeout during resp.read() raises a bare
TimeoutError that escaped the typed-BillingError contract and reached
callers as an unhandled exception. Catch it narrowly and normalize.
The boundary test now asserts normalization instead of documenting the
leak.
* fix(shared): stop typing mutation success payloads as error payloads
BillingMutationResponse.payload was declared BillingErrorPayload, but on
ok:true the gateway passes through the raw NAS success body (rail,
changeType, cancelAtPeriodEnd, ...). The TUI never reads it so nothing
broke, but the shared contract now feeds the desktop app too — widen the
field deliberately and document both shapes.
* feat(shared): typed billing refusal and charge-failure unions
- BillingRefusalCode covers every code the gateway serializes today, with a
(string & {}) arm so unknown future codes (the NAS W3 card-health family)
stay assignable — consumers keep their unknown-code fallback.
- ChargeFailureReason models the four NAS terminal reasons plus the raw
subscription_payment_intent_requires_action code NAS leaks pre-#711.
- billing.state now carries the server-derived can_change_plan the gateway
emits; capability comments updated (canChangePlan is capability-based, not
an OWNER/ADMIN role gate).
* docs(billing): client-side billing state and refusal lifecycle table
Enumerates, from the code, every billing.state shape and typed refusal the
gateway serves and the exact TUI copy + recovery each renders. Acceptance from
the billing-integration handoff: no NAS billing state or typed refusal falls
through to a generic toast; unknown codes still degrade to the default branch
that surfaces the server message.
* refactor(desktop): consume @hermes/shared billing types, full refusal copy, divergence notice
- billing/types.ts becomes a re-export shim over @hermes/shared/billing (keeps
the desktop-only bounds field via a local BillingAutoReload extension);
needs_repair is gone with the shared type.
- resolveRefusal gains specific copy for consent_required, org_access_denied,
upgrade_cap_exceeded, stripe_unavailable (transient, honors retry_after) and
processing_error; BillingErrorKind now IS the shared BillingRefusalCode.
Default fallback unchanged.
- Auto-refill row surfaces the distinct-card divergence: caption naming the
charging card (or 'a different card' when brand/last4 are null) and a
Reconcile portal deep-link instead of the inline edit form.
- Fixtures/tests updated for the required auto_reload.card union; new
auto-refill-divergent dev fixture.
* fix(desktop): auto-refill-divergent fixture must be enabled to exercise the divergence row
* refactor(billing): explicit BillingTransient trait, drop broken credits.view, public token-cache invalidation
- BillingRateLimited / BillingStripeUnavailable / BillingUpgradeCapExceeded
become siblings under a new BillingTransient trait (deterministic non-charge
outcome, safe to retry) instead of the false is-a chain that made a Stripe
outage 'a kind of rate limiting'. Catch sites that meant 'any deterministic
pre-charge transient' now say so explicitly; the gateway serializer
dispatches on the trait and emits the preserved raw code.
- Delete the credits.view RPC handler left broken by the /topup rename (its
body referenced an undefined variable; no caller remains).
- invalidate_cached_token() replaces the CLI's reach into the private
_token_cache global after a billing step-up.
* refactor(cli): extract CLIBillingMixin; charge gates follow the server capability
- Move the ~1,400-line billing/subscription handler family out of cli.py into
hermes_cli/cli_billing_mixin.py, following the existing HermesCLI mixin
pattern (lazy cli imports, verbatim bodies).
- can_charge and the CLI billing-action gates now route through
can_change_plan (server capability with legacy role fallback) instead of the
deprecated 3-role is_admin — a FINANCE_ADMIN the server authorizes can now
add funds, matching the plan-change path.
- Render the spend bar from the UsageBar model's fill_fraction instead of the
deleted _billing_spend_bar re-derivation; fix a stale docstring.
* refactor(tui): promote useMenu to overlay primitives, type pendingTierId end-to-end
- useMenu (arrow/number/Enter/Esc menu hook) moves to overlayPrimitives with
an onKey escape hatch; billingOverlay's Overview and Limit screens drop
their verbatim copies. BuyScreen keeps its bespoke handler (typing mode +
stale-selection clamp don't fit the shared contract cleanly).
- SubscriptionResult carries pendingTierId directly; the shadow
SubscriptionResultWithPending interface and the ResultScreen cast are gone,
so the apply-poll field is type-tracked through finish().
* docs(billing): correct the CLI-parity row — the CLI has the full in-terminal change flow
* refactor(shared): move terminal-billing wire types to @hermes/shared
The billing/subscription wire shapes (plus UsageBarData/UsageModelData,
which they reference) move verbatim from ui-tui/src/gatewayTypes.ts into
apps/shared/src/billing-types.ts so the desktop app can share the same
gateway contract. gatewayTypes.ts re-exports every moved name from the
new @hermes/shared/billing subpath, so no ui-tui consumer changes.
The subpath export keeps DOM-less ui-tui from pulling the barrel (whose
WebSocket helpers need the DOM lib). ui-tui also now declares its
@hermes/shared dependency explicitly instead of relying on workspace
hoisting.
* test(cli): pin nous_billing wire-layer status-to-exception mapping
The HTTP layer's error handling had zero coverage through _request:
only 2xx parsing and request shaping were tested, and the mapping cases
in test_remote_spending_gate_contract.py hit _raise_for_error directly.
Adds 19 tests driving _request via a monkeypatched urlopen: the
401-refresh-retry path (success, terminal plain/session_revoked,
idempotency-key preservation, base re-resolution), 403 variants through
the wire, 429/503 retry-after, non-JSON error bodies, 404/502
fallbacks, and URLError normalization.
Two behaviors are pinned as findings rather than fixed: a JSON-body
retryAfter hint is ignored unless the Retry-After header is present,
and a bare socket.timeout propagates uncaught (real urllib wraps
timeouts in URLError before this layer).
* fix(cli): normalize read-phase timeouts to the typed billing error
urlopen wraps connect-phase timeouts in URLError (already mapped to
network_error), but a timeout during resp.read() raises a bare
TimeoutError that escaped the typed-BillingError contract and reached
callers as an unhandled exception. Catch it narrowly and normalize.
The boundary test now asserts normalization instead of documenting the
leak.
* fix(shared): stop typing mutation success payloads as error payloads
BillingMutationResponse.payload was declared BillingErrorPayload, but on
ok:true the gateway passes through the raw NAS success body (rail,
changeType, cancelAtPeriodEnd, ...). The TUI never reads it so nothing
broke, but the shared contract now feeds the desktop app too — widen the
field deliberately and document both shapes.
* feat(shared): typed billing refusal and charge-failure unions
- BillingRefusalCode covers every code the gateway serializes today, with a
(string & {}) arm so unknown future codes (the NAS W3 card-health family)
stay assignable — consumers keep their unknown-code fallback.
- ChargeFailureReason models the four NAS terminal reasons plus the raw
subscription_payment_intent_requires_action code NAS leaks pre-#711.
- billing.state now carries the server-derived can_change_plan the gateway
emits; capability comments updated (canChangePlan is capability-based, not
an OWNER/ADMIN role gate).
* feat(shared): closed Known* halves for the refusal and charge-failure unions
- KnownBillingRefusalCode / KnownChargeFailureReason are closed literal sets,
so classification tables, copy maps and tests can be Record-exhaustive and
break at compile time when a code is added but not mapped. The wire types
keep the (string & {}) open arm for unknown future codes.
- Add network_error (client-originated transport code the gateway already
serializes) to the known set.
- Export the union types from the root barrel alongside the other billing
names.
* feat(shared): canonical billing refusal policy and charge-settlement driver
- billing-policy.ts: one exhaustive Record<KnownBillingRefusalCode,
BillingRefusalPolicy> classifying every known code (recovery kind,
mid-poll ambiguity, idempotency-key reuse) with a documented unknown-code
fallback. Surfaces keep their own copy; the behavior classification now
has a single home that breaks the build when a new code goes unmapped.
- charge-settlement.ts: the settlement poll state machine (2s cadence,
5-minute cap, bounded retry-after backoff, ambiguous-on-revocation) as a
pure dependency-injected driver returning a discriminated outcome.
- The TUI's pollCharge becomes a thin renderer over the shared driver —
byte-identical output, and the desktop poller can now share the same
machine instead of a drifting copy.
* fix(desktop): real auto-reload bounds, shared refusal policy and settlement driver
- Delete the phantom BillingAutoReload.bounds plumbing: nothing ever populated
it, so the auto-reload amount validation it fed was silently dead. The
editor and validators now enforce the gateway's real top-level
min_usd/max_usd (new test pins the $10 minimum actually rejecting), and
types.ts collapses to a plain re-export shim over @hermes/shared/billing.
- Delete the test-only BillingRpcResponse envelope family; BillingResult is
the one response model.
- Refusal copy speaks desktop: reconnect/sign-in route to Settings → Gateway
instead of the TUI's /portal command; the dead processing_error refusal
case is gone (it is a charge-failure reason, already rendered by the
poller).
- Adopt @hermes/shared billing-policy + charge-settlement: the poll loop is
the shared driver, revocation-ambiguity comes from the policy table
(insufficient_scope mid-poll now counts, per the ruling), and all
policy-retry codes back off during polling instead of failing hard.
errors.test.ts is Record-exhaustive over KnownBillingRefusalCode again.
* refactor(shared): move terminal-billing wire types to @hermes/shared
The billing/subscription wire shapes (plus UsageBarData/UsageModelData,
which they reference) move verbatim from ui-tui/src/gatewayTypes.ts into
apps/shared/src/billing-types.ts so the desktop app can share the same
gateway contract. gatewayTypes.ts re-exports every moved name from the
new @hermes/shared/billing subpath, so no ui-tui consumer changes.
The subpath export keeps DOM-less ui-tui from pulling the barrel (whose
WebSocket helpers need the DOM lib). ui-tui also now declares its
@hermes/shared dependency explicitly instead of relying on workspace
hoisting.
* test(cli): pin nous_billing wire-layer status-to-exception mapping
The HTTP layer's error handling had zero coverage through _request:
only 2xx parsing and request shaping were tested, and the mapping cases
in test_remote_spending_gate_contract.py hit _raise_for_error directly.
Adds 19 tests driving _request via a monkeypatched urlopen: the
401-refresh-retry path (success, terminal plain/session_revoked,
idempotency-key preservation, base re-resolution), 403 variants through
the wire, 429/503 retry-after, non-JSON error bodies, 404/502
fallbacks, and URLError normalization.
Two behaviors are pinned as findings rather than fixed: a JSON-body
retryAfter hint is ignored unless the Retry-After header is present,
and a bare socket.timeout propagates uncaught (real urllib wraps
timeouts in URLError before this layer).
* fix(cli): normalize read-phase timeouts to the typed billing error
urlopen wraps connect-phase timeouts in URLError (already mapped to
network_error), but a timeout during resp.read() raises a bare
TimeoutError that escaped the typed-BillingError contract and reached
callers as an unhandled exception. Catch it narrowly and normalize.
The boundary test now asserts normalization instead of documenting the
leak.
* fix(shared): stop typing mutation success payloads as error payloads
BillingMutationResponse.payload was declared BillingErrorPayload, but on
ok:true the gateway passes through the raw NAS success body (rail,
changeType, cancelAtPeriodEnd, ...). The TUI never reads it so nothing
broke, but the shared contract now feeds the desktop app too — widen the
field deliberately and document both shapes.
* feat(shared): typed billing refusal and charge-failure unions
- BillingRefusalCode covers every code the gateway serializes today, with a
(string & {}) arm so unknown future codes (the NAS W3 card-health family)
stay assignable — consumers keep their unknown-code fallback.
- ChargeFailureReason models the four NAS terminal reasons plus the raw
subscription_payment_intent_requires_action code NAS leaks pre-#711.
- billing.state now carries the server-derived can_change_plan the gateway
emits; capability comments updated (canChangePlan is capability-based, not
an OWNER/ADMIN role gate).
* feat(shared): closed Known* halves for the refusal and charge-failure unions
- KnownBillingRefusalCode / KnownChargeFailureReason are closed literal sets,
so classification tables, copy maps and tests can be Record-exhaustive and
break at compile time when a code is added but not mapped. The wire types
keep the (string & {}) open arm for unknown future codes.
- Add network_error (client-originated transport code the gateway already
serializes) to the known set.
- Export the union types from the root barrel alongside the other billing
names.
* feat(shared): canonical billing refusal policy and charge-settlement driver
- billing-policy.ts: one exhaustive Record<KnownBillingRefusalCode,
BillingRefusalPolicy> classifying every known code (recovery kind,
mid-poll ambiguity, idempotency-key reuse) with a documented unknown-code
fallback. Surfaces keep their own copy; the behavior classification now
has a single home that breaks the build when a new code goes unmapped.
- charge-settlement.ts: the settlement poll state machine (2s cadence,
5-minute cap, bounded retry-after backoff, ambiguous-on-revocation) as a
pure dependency-injected driver returning a discriminated outcome.
- The TUI's pollCharge becomes a thin renderer over the shared driver —
byte-identical output, and the desktop poller can now share the same
machine instead of a drifting copy.
* refactor(shared): move terminal-billing wire types to @hermes/shared
The billing/subscription wire shapes (plus UsageBarData/UsageModelData,
which they reference) move verbatim from ui-tui/src/gatewayTypes.ts into
apps/shared/src/billing-types.ts so the desktop app can share the same
gateway contract. gatewayTypes.ts re-exports every moved name from the
new @hermes/shared/billing subpath, so no ui-tui consumer changes.
The subpath export keeps DOM-less ui-tui from pulling the barrel (whose
WebSocket helpers need the DOM lib). ui-tui also now declares its
@hermes/shared dependency explicitly instead of relying on workspace
hoisting.
* test(cli): pin nous_billing wire-layer status-to-exception mapping
The HTTP layer's error handling had zero coverage through _request:
only 2xx parsing and request shaping were tested, and the mapping cases
in test_remote_spending_gate_contract.py hit _raise_for_error directly.
Adds 19 tests driving _request via a monkeypatched urlopen: the
401-refresh-retry path (success, terminal plain/session_revoked,
idempotency-key preservation, base re-resolution), 403 variants through
the wire, 429/503 retry-after, non-JSON error bodies, 404/502
fallbacks, and URLError normalization.
Two behaviors are pinned as findings rather than fixed: a JSON-body
retryAfter hint is ignored unless the Retry-After header is present,
and a bare socket.timeout propagates uncaught (real urllib wraps
timeouts in URLError before this layer).
* fix(cli): normalize read-phase timeouts to the typed billing error
urlopen wraps connect-phase timeouts in URLError (already mapped to
network_error), but a timeout during resp.read() raises a bare
TimeoutError that escaped the typed-BillingError contract and reached
callers as an unhandled exception. Catch it narrowly and normalize.
The boundary test now asserts normalization instead of documenting the
leak.
* fix(shared): stop typing mutation success payloads as error payloads
BillingMutationResponse.payload was declared BillingErrorPayload, but on
ok:true the gateway passes through the raw NAS success body (rail,
changeType, cancelAtPeriodEnd, ...). The TUI never reads it so nothing
broke, but the shared contract now feeds the desktop app too — widen the
field deliberately and document both shapes.
* feat(shared): typed billing refusal and charge-failure unions
- BillingRefusalCode covers every code the gateway serializes today, with a
(string & {}) arm so unknown future codes (the NAS W3 card-health family)
stay assignable — consumers keep their unknown-code fallback.
- ChargeFailureReason models the four NAS terminal reasons plus the raw
subscription_payment_intent_requires_action code NAS leaks pre-#711.
- billing.state now carries the server-derived can_change_plan the gateway
emits; capability comments updated (canChangePlan is capability-based, not
an OWNER/ADMIN role gate).
* feat(shared): closed Known* halves for the refusal and charge-failure unions
- KnownBillingRefusalCode / KnownChargeFailureReason are closed literal sets,
so classification tables, copy maps and tests can be Record-exhaustive and
break at compile time when a code is added but not mapped. The wire types
keep the (string & {}) open arm for unknown future codes.
- Add network_error (client-originated transport code the gateway already
serializes) to the known set.
- Export the union types from the root barrel alongside the other billing
names.
* feat(shared): canonical billing refusal policy and charge-settlement driver
- billing-policy.ts: one exhaustive Record<KnownBillingRefusalCode,
BillingRefusalPolicy> classifying every known code (recovery kind,
mid-poll ambiguity, idempotency-key reuse) with a documented unknown-code
fallback. Surfaces keep their own copy; the behavior classification now
has a single home that breaks the build when a new code goes unmapped.
- charge-settlement.ts: the settlement poll state machine (2s cadence,
5-minute cap, bounded retry-after backoff, ambiguous-on-revocation) as a
pure dependency-injected driver returning a discriminated outcome.
- The TUI's pollCharge becomes a thin renderer over the shared driver —
byte-identical output, and the desktop poller can now share the same
machine instead of a drifting copy.
* chore: retrigger CI with the current base SHA (stale base pin flagged a false CI-sensitive change)
* refactor(shared): move terminal-billing wire types to @hermes/shared
The billing/subscription wire shapes (plus UsageBarData/UsageModelData,
which they reference) move verbatim from ui-tui/src/gatewayTypes.ts into
apps/shared/src/billing-types.ts so the desktop app can share the same
gateway contract. gatewayTypes.ts re-exports every moved name from the
new @hermes/shared/billing subpath, so no ui-tui consumer changes.
The subpath export keeps DOM-less ui-tui from pulling the barrel (whose
WebSocket helpers need the DOM lib). ui-tui also now declares its
@hermes/shared dependency explicitly instead of relying on workspace
hoisting.
* test(cli): pin nous_billing wire-layer status-to-exception mapping
The HTTP layer's error handling had zero coverage through _request:
only 2xx parsing and request shaping were tested, and the mapping cases
in test_remote_spending_gate_contract.py hit _raise_for_error directly.
Adds 19 tests driving _request via a monkeypatched urlopen: the
401-refresh-retry path (success, terminal plain/session_revoked,
idempotency-key preservation, base re-resolution), 403 variants through
the wire, 429/503 retry-after, non-JSON error bodies, 404/502
fallbacks, and URLError normalization.
Two behaviors are pinned as findings rather than fixed: a JSON-body
retryAfter hint is ignored unless the Retry-After header is present,
and a bare socket.timeout propagates uncaught (real urllib wraps
timeouts in URLError before this layer).
* fix(cli): normalize read-phase timeouts to the typed billing error
urlopen wraps connect-phase timeouts in URLError (already mapped to
network_error), but a timeout during resp.read() raises a bare
TimeoutError that escaped the typed-BillingError contract and reached
callers as an unhandled exception. Catch it narrowly and normalize.
The boundary test now asserts normalization instead of documenting the
leak.
* …
OmarB97
pushed a commit
that referenced
this pull request
Jul 29, 2026
…e_check_xsrf pitfalls Add two pitfalls discovered when running the skill against a fresh Jupyter server: - Pitfall #9: When the websocket reply channel hangs on every execute even though the kernel actually ran (REST shows execution_state=idle and execution_count increments), force zmq transport with --transport zmq. The zmq transport uses jupyter_client directly and sidesteps the broken websocket layer. - Pitfall #10: A fresh ServerApp rejects POST /api/sessions with "_xsrf argument missing from POST" unless you start it with --ServerApp.disable_check_xsrf=True. Needed for REST-only flows where no browser/cookie is establishing the XSRF token.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Problem
atomic_replace()inutils.pyusesos.replace()to atomically swap a temp file into place. When the temp file and the resolved target live on different filesystems,os.replace()fails with:This affects users running Hermes in WSL whose config is symlinked into the Windows host filesystem (e.g.
~/.hermes/config.yaml → /mnt/c/Users/.../dotfiles/hermes/config.yaml). Everyhermes config setcall fails.Root Cause
tempfile.mkstemp()creates the temp file in~/.hermes/(WSL ext4) butos.path.realpath()resolves the symlink to/mnt/c/...(Windows 9P mount).rename(2)cannot cross filesystem boundaries, soos.replace()raises EXDEV.Fix
Catch
errno.EXDEVand fall back toshutil.copy2()+os.unlink():copy2preserves metadata (permissions, timestamps)unlinkremoves the temp file after successful copyThis benefits anyone using symlinked dotfiles across filesystem boundaries (WSL
9Pmounts, macOS APFS symlinks to external volumes, Linux bind mounts, Docker volume edge cases).Tested