ONLYOFFICE DocSpace for Kubernetes

The following guide covers the installation process of the ‘ONLYOFFICE DocSpace’ into a Kubernetes cluster or OpenShift cluster.

Requirements

Kubernetes version no lower than 1.19+ or OpenShift version no lower than 3.11+
A minimum of two hosts is required for the Kubernetes cluster
Resources for the cluster hosts: 4 CPU \ 8 GB RAM min
Kubectl is installed on the cluster management host. Read more on the installation of kubectl here
Helm v3.7+ is installed on the cluster management host. Read more on the installation of Helm here
If you use OpenShift, you can use both oc and kubectl to manage deploy.
If the installation of components external to ‘ONLYOFFICE DocSpace’ is performed from Helm Chart in an OpenShift cluster, then it is recommended to install them from a user who has the cluster-admin role, in order to avoid possible problems with access rights. See this guide to add the necessary roles to the user.

Deploy prerequisites

Note: It may be required to apply SecurityContextConstraints policy when installing into OpenShift cluster, which adds permission to run containers from a user whose ID = 1000 and ID = 1001.

To do this, run the following commands:

$ oc apply -f https://raw.githubusercontent.com/ONLYOFFICE/Kubernetes-DocSpace/main/sources/scc/helm-components.yaml
$ oc adm policy add-scc-to-group scc-helm-components system:authenticated

1. Add Helm repositories

$ helm repo add bitnami https://charts.bitnami.com/bitnami
$ helm repo add nfs-server-provisioner https://kubernetes-sigs.github.io/nfs-ganesha-server-and-external-provisioner
$ helm repo add ingress-nginx https://kubernetes.github.io/ingress-nginx
$ helm repo add onlyoffice https://download.onlyoffice.com/charts/stable
$ helm repo update

2. Install NFS Provisioner

Note: When installing NFS Server Provisioner, Storage Classes - NFS is created. When installing to an OpenShift cluster, the user must have a role that allows you to create Storage Classes in the cluster. Read more here.

$ helm install nfs-server nfs-server-provisioner/nfs-server-provisioner \
  --set persistence.enabled=true \
  --set "storageClass.mountOptions={vers=4,timeo=20}" \
  --set persistence.storageClass=PERSISTENT_STORAGE_CLASS \
  --set persistence.size=PERSISTENT_SIZE

PERSISTENT_STORAGE_CLASS is a Persistent Storage Class available in your Kubernetes cluster.
PERSISTENT_SIZE is the total size of all Persistent Storages for the nfs Persistent Storage Class. Must be at least the sum of the values of the persistence and opensearch.persistence.size parameters if persistence.storageClass=nfs and opensearch.persistence.storageClass=nfs. You can express the size as a plain integer with one of these suffixes: T, G, M, Ti, Gi, Mi. For example: 19Gi.

See more details about installing NFS Server Provisioner via Helm here.

The PersistentVolume type to be used for PVC placement must support Access Mode ReadWriteMany.

Also, PersistentVolume must have as the owner the user from whom the ONLYOFFICE DocSpace will be started. By default it is onlyoffice (104:107).

3. Install MySQL

To install MySQL to your cluster, run the following command:

$ helm install mysql -f https://raw.githubusercontent.com/ONLYOFFICE/Kubernetes-DocSpace/main/sources/mysql_values.yaml bitnami/mysql \
  --set auth.database=docspace \
  --set auth.username=onlyoffice_user \
  --set primary.persistence.storageClass=PERSISTENT_STORAGE_CLASS \
  --set primary.persistence.size=PERSISTENT_SIZE \
  --set metrics.enabled=false

See more details about installing MySQL via Helm here.

Here PERSISTENT_SIZE is a size for the Database persistent volume. For example: 8Gi.

4. Install RabbitMQ

To install RabbitMQ to your cluster, run the following command:

$ helm install rabbitmq bitnami/rabbitmq \
  --set persistence.storageClass=PERSISTENT_STORAGE_CLASS \
  --set metrics.enabled=false

See more details about installing RabbitMQ via Helm here.

5. Install Redis

To install Redis to your cluster, run the following command:

$ helm install redis bitnami/redis \
  --set architecture=standalone \
  --set master.persistence.storageClass=PERSISTENT_STORAGE_CLASS \
  --set metrics.enabled=false

See more details about installing Redis via Helm here.

6. Install OpenSearch

To install OpenSearch to your cluster, set the opensearch.enabled=true parameter when installing ONLYOFFICE DocSpace.

If you want to connect ONLYOFFICE DocSpace with an external OpenSearch instance, you need to specify the corresponding values in connections.elkSheme, connections.elkHost, connections.elkPort, connections.elkThreads parameters and define opensearch.enabled parameter as false.

7. Install ONLYOFFICE Docs

NOTE: It is recommended to use an installation made specifically for Kubernetes. See more details about installing ONLYOFFICE Docs in Kubernetes via Helm here. Use the built-in Document Server only for the test environment.

If Kubernetes-Docs is deployed in the same cluster as ONLYOFFICE DocSpace is planned to be deployed, then in the connections.documentServerHost parameter you can specify the service name documentserver:8888. Also, specify the Namespace if the Docs is deployed in a different Namespace than ONLYOFFICE DocSpace is planned, for example, documentserver.ds:8888. Also, in the connections.appUrlPortal parameter, specify the router service name of the ONLYOFFICE DocSpace and the Namespace in which ONLYOFFICE DocSpace will be deployed, for example, http://router.default:8092.

If Kubernetes-Docs is deployed externally, relative to the cluster in which ONLYOFFICE DocSpace is planned to be deployed, then you need to specify the external Docs address in the connections.documentServerUrlExternal parameter in the http(s)://<documentserver-address>/ format and set docs.enabled to false and in the connections.appUrlPortal parameter, specify the external address of the ONLYOFFICE DocSpace, for example, https://docspace.example.com.

Also, when using Kubernetes-Docs, specify the JWT parameters the same as in Docs in jwt.secret, jwt.header, etc.

8. Make changes to the configuration files (optional)

8.1 Create a Secret containing a json file

To create a Secret containing configuration files for overriding default values and additional configuration files for ONLYOFFICE DocSpace, you need to run the following command:

$ kubectl create secret generic docspace-custom-config \
  --from-file=./appsettings.test.json \
  --from-file=./notify.test.json

Note: Any name can be used instead of docspace-custom-config.

Note: The example above shows two configuration files. You can use as many as you want, as well as only one file.

Note: When using the test suffix in the file name, set the connections.envExtension parameter to test.

8.2 Specify parameters when installing ONLYOFFICE DocSpace

When installing ONLYOFFICE DocSpace, specify the extraConf.secretName=docspace-custom-config and extraConf.filename={appsettings.test.json,notify.test.json} parameters.

Note: If you need to add a configuration file after the ONLYOFFICE DocSpace is already installed, you need to execute step 8.1 and then run the helm upgrade [RELEASE_NAME] onlyoffice/docspace --set extraConf.secretName=docspace-custom-config --set "extraConf.filename={appsettings.test.json,notify.test.json}" --no-hooks command or helm upgrade [RELEASE_NAME] -f ./values.yaml onlyoffice/docspace --no-hooks if the parameters are specified in the values.yaml file.

Deploy ONLYOFFICE DocSpace

Note: It may be required to apply SecurityContextConstraints policy when installing into OpenShift cluster, which adds permission to run containers from a user whose ID = 104.

To do this, run the following commands:

$ oc apply -f https://raw.githubusercontent.com/ONLYOFFICE/Kubernetes-DocSpace/main/sources/scc/docspace-components.yaml
$ oc adm policy add-scc-to-group scc-docspace-components system:authenticated

Also, you must set the podSecurityContext.enabled parameter to true:

$ helm install [RELEASE_NAME] onlyoffice/docspace --set podSecurityContext=true

1. Add a license

If you have a valid ONLYOFFICE DocSpace license, set the connections.installationType parameter to ENTERPRISE and install ONLYOFFICE Docspace

$ helm install [RELEASE_NAME] -f values.yaml onlyoffice/docspace --set connections.installationType=ENTERPRISE

At the wizard page during the first login please add your license using the corresponding field.

If you have initially installed Community version and plan to switch to Enterprise version using the corresponding license, please perform an update using connections.installationType=ENTERPRISE parameter, then add your license using the corresponding field in Payments section.

2. Install ONLYOFFICE DocSpace

NOTE: When you deploy in production you should turn off the built-in Document Server by setting docs.enabled parameter to false and use the Document Server installation designed specifically for Kubernetes. For more information, see here.

To install ONLYOFFICE DocSpace to your cluster, run the following command:

$ helm install [RELEASE_NAME] -f values.yaml onlyoffice/docspace

The command deploys ONLYOFFICE DocSpace on the Kubernetes cluster in the default configuration. The [Parameters] section lists the parameters that can be configured during installation.

See helm install for command documentation.

3. Uninstall ONLYOFFICE DocSpace

To uninstall/delete the docspace deployment:

$ helm uninstall [RELEASE_NAME]

The helm uninstall command removes all the Kubernetes components associated with the chart and deletes the release.

See helm uninstall for command documentation.

4. Upgrade ONLYOFFICE DocSpace

Note: If you have Elasticsearch installed, please read this section.

It's necessary to set the parameters for updating. For example,

$ helm upgrade [RELEASE_NAME] onlyoffice/docspace \
  --set images.tag=[tag]

Note: also need to specify the parameters that were specified during installation

Or modify the values.yaml file and run the command:

$ helm upgrade [RELEASE_NAME] -f values.yaml onlyoffice/docspace

Running the helm upgrade command runs a hook that cleans up the directory with libraries and then fills with new ones. This is needed when updating the version of ONLYOFFICE DocSpace. The default hook execution time is 300s. The execution time can be changed using --timeout [time], for example:

$ helm upgrade [RELEASE_NAME] -f values.yaml onlyoffice/docspace --timeout 15m

If you want to update any parameter other than the version of the ONLYOFFICE DocSpace, then run the helm upgrade command without hooks, for example:

$ helm upgrade [RELEASE_NAME] onlyoffice/docspace --set jwt.enabled=false --no-hooks

See helm upgrade for command documentation.

To rollback updates, run the following command:

$ helm rollback [RELEASE_NAME]

See helm rollback for command documentation.

Parameters

Common parameters

Parameter	Description	Default
`connections.envExtension`	Defines whether an environment will be used	`none`
`connections.installationType`	Defines solution type	`COMMUNITY`
`connections.migrationType`	Defines migration type	`STANDALONE`
`connections.mysqlDatabaseMigration`	Enables database migration	`false`
`connections.mysqlHost`	The IP address or the name of the Database host	`mysql`
`connections.mysqlPort`	Database server port number	`3306`
`connections.mysqlDatabase`	Name of the Database the application will be connected with. The database must already exist	`docspace`
`connections.mysqlUser`	Database user	`onlyoffice_user`
`connections.mysqlPassword`	Database user password. If set to, it takes priority over the `connections.mysqlExistingSecret`	`""`
`connections.mysqlExistingSecret`	Name of existing secret to use for Database passwords. Must contain the key specified in `connections.mysqlSecretKeyPassword`	`mysql`
`connections.mysqlSecretKeyPassword`	The name of the key that contains the Database user password. If you set a password in `connections.mysqlPassword`, a secret will be automatically created, the key name of which will be the value set here	`mysql-password`
`connections.redisHost`	The IP address or the name of the Redis host. If Redis is deployed inside a k8s cluster, then you need to specify the FQDN name of the service	`redis-master.default.svc.cluster.local`
`connections.redisPort`	The Redis server port number	`6379`
`connections.redisUser`	The Redis user name	`default`
`connections.redisExistingSecret`	Name of existing secret to use for Redis password. Must contain the key specified in `connections.redisSecretKeyName`	`redis`
`connections.redisSecretKeyName`	The name of the key that contains the Redis user password. If you set a password in `connections.redisPassword`, a secret will be automatically created, the key name of which will be the value set here	`redis-password`
`connections.redisPassword`	The password set for the Redis account. If set to, it takes priority over the `connections.redisExistingSecret`	`""`
`connections.redisNoPass`	Defines whether to use a Redis auth without a password. If the connection to Redis server does not require a password, set the value to `true`	`false`
`connections.brokerHost`	The IP address or the name of the Broker host	`rabbitmq`
`connections.brokerPort`	The port for the connection to Broker host	`5672`
`connections.brokerVhost`	The virtual host for the connection to Broker host	`/`
`connections.brokerUser`	The username for the Broker account	`guest`
`connections.brokerProto`	The protocol for the connection to Broker host	`amqp`
`connections.brokerUri`	A string containing the necessary connection parameters to Broker. If set to, it takes priority	`""`
`connections.brokerExistingSecret`	The name of existing secret to use for Broker password. Must contain the key specified in `connections.brokerSecretKeyName`	`rabbitmq`
`connections.brokerSecretKeyName`	The name of the key that contains the Broker user password. If you set a password in `connections.brokerPassword`, a secret will be automatically created, the key name of which will be the value set here	`rabbitmq-password`
`connections.brokerPassword`	Broker user password. If set to, it takes priority over the `connections.brokerExistingSecret`	`""`
`connections.elkSheme`	The protocol for the connection to Opensearch	`http`
`connections.elkHost`	The IP address or the name of the Opensearch host	`opensearch`
`connections.elkPort`	The port for the connection to Opensearch	`9200`
`connections.elkThreads`	Number of threads in Opensearch	`1`
`connections.apiHost`	The name of the ONLYOFFICE DocSpace Api service	`api`
`connections.apiSystemHost`	The name of the ONLYOFFICE DocSpace Api System service	`api-system`
`connections.notifyHost`	The name of the ONLYOFFICE DocSpace Notify service	`notify`
`connections.studioNotifyHost`	The name of the ONLYOFFICE DocSpace Studio Notify service	`studio-notify`
`connections.socketHost`	The name of the ONLYOFFICE DocSpace Socket service	`socket`
`connections.peopleServerHost`	The name of the ONLYOFFICE DocSpace People Server service	`people-server`
`connections.filesHost`	The name of the ONLYOFFICE DocSpace Files service	`files`
`connections.filesServicesHost`	The name of the ONLYOFFICE DocSpace Files Services service	`files-services`
`connections.studioHost`	The name of the ONLYOFFICE DocSpace Studio service	`studio`
`connections.backupHost`	The name of the ONLYOFFICE DocSpace Backup service	`backup`
`connections.ssoauthHost`	The name of the ONLYOFFICE DocSpace SSO service	`ssoauth`
`connections.clearEventsHost`	The name of the ONLYOFFICE DocSpace Clear Events service	`clear-events`
`connections.doceditorHost`	The name of the ONLYOFFICE DocSpace Doceditor service	`doceditor`
`connections.backupBackgroundTasksHost`	The name of the ONLYOFFICE DocSpace Backup Background Tasks service	`backup-background-tasks`
`connections.loginHost`	The name of the ONLYOFFICE DocSpace Login service	`login`
`connections.healthchecksHost`	The name of the ONLYOFFICE DocSpace Healthchecks service	`healthchecks`
`connections.documentServerHost`	The name of the Document Server service. Used when installing a local Document Server (by default `docs.enabled=true`)	`document-server`
`connections.documentServerUrlExternal`	The address of the external Document Server. If set, the local Document Server will not be installed	`""`
`connections.appUrlPortal`	URL for ONLYOFFICE DocSpace requests. By default, the name of the routing (Router) service and the port on which it accepts requests are used	`http://router:8092`
`connections.appCoreBaseDomain`	The base domain on which the ONLYOFFICE DocSpace will be available	`localhost`
`connections.appCoreMachinekey.secretKey`	The secret key used in the ONLYOFFICE DocSpace	`your_core_machinekey`
`connections.appCoreMachinekey.existingSecret`	The name of an existing secret containing Core Machine Key. Must contain the `APP_CORE_MACHINEKEY` key. If not specified, a secret will be created with the value set in `connections.appCoreMachinekey.secretKey`	`""`
`connections.countWorkerConnections`	Defines the nginx config worker_connections directive for routing (Router) service	`1024`
`connections.nginxSnvsubstTemplateSuffix`	A suffix of template files for rendering nginx configs in routing (Router) service	`.template`
`connections.appKnownNetworks`	Defines the address ranges of known networks to accept forwarded headers from for ONLYOFFICE DocSpace services. In particular, the networks in which the proxies that you are using in front of DocSpace services are located should be indicated here. Provide IP ranges using CIDR notation	`10.244.0.0/16`
`connections.oauthRedirectURL`	Address of the oauth authorization server	`https://service.onlyoffice.com/oauth2.aspx`
`namespaceOverride`	The name of the namespace in which ONLYOFFICE DocSpace will be deployed. If not set, the name will be taken from `.Release.Namespace`	`""`
`commonLabels`	Defines labels that will be additionally added to all the deployed resources. You can also use `tpl` as the value for the key	`{}`
`commonAnnotations`	Defines annotations that will be additionally added to all the deployed resources. You can also use `tpl` as the value for the key. Some resources may override the values specified here with their own	`{}`
`podAnnotations`	Map of annotations to add to the ONLYOFFICE DocSpace pods. Each Docspace application can override the values specified here with its own	`rollme: "{{ randAlphaNum 5 \| quote }}"`
`serviceAccount.create`	Enable ServiceAccount creation	`false`
`serviceAccount.name`	Name of the ServiceAccount to be used. If not set and `serviceAccount.create` is `true` the name will be taken from `.Release.Name` or `serviceAccount.create` is `false` the name will be "default"	`""`
`serviceAccount.annotations`	Map of annotations to add to the ServiceAccount	`{}`
`serviceAccount.automountServiceAccountToken`	Enable auto mount of ServiceAccountToken on the serviceAccount created. Used only if `serviceAccount.create` is `true`	`true`
`podSecurityContext.enabled`	Enable security context for the pods. If set to true, `podSecurityContext` is enabled for all resources describing the podTemplate. Individual values for `docs` and `elasticsearch`	`false`
`podSecurityContext.fsGroup`	Defines the Group ID to which the owner and permissions for all files in volumes are changed when mounted in the ONLYOFFICE DocSpace application Pods	`107`
`containerSecurityContext.enabled`	Enable security context for containers in ONLYOFFICE DocSpace application pods. Individual values for `docs` and `opensearch`	`false`
`nodeSelector`	Node labels for ONLYOFFICE DocSpace application pods assignment. Each ONLYOFFICE Docspace application can override the values specified here with its own	`{}`
`tolerations`	Tolerations for ONLYOFFICE DocSpace application pods assignment. Each ONLYOFFICE Docspace application can override the values specified here with its own	`[]`
`imagePullSecrets`	Container image registry secret name	`""`
`images.tag`	Global image tag for all DocSpace applications. Does not apply to the Document Server, Elasticsearch and Proxy Frontend	`2.6.3`
`jwt.enabled`	Specifies the enabling the JSON Web Token validation by the DocSpace	`true`
`jwt.secret`	Defines the secret key to validate the JSON Web Token in the request to the DocSpace	`jwt_secret`
`jwt.header`	Defines the http header that will be used to send the JSON Web Token	`AuthorizationJwt`
`jwt.inBody`	Specifies the enabling the token validation in the request body to the ONLYOFFICE DocSpace	`false`
`jwt.existingSecret`	The name of an existing secret containing variables for jwt. If not specified, a secret named `jwt` will be created	`""`
`extraConf.secretName`	The name of the Secret containing the json files that override the default values and additional configuration files	`""`
`extraConf.filename`	The name of the json files that contains custom values and name additional configuration files. Must be the same as the `key` name in `extraConf.secretName`. May contain multiple values	`appsettings.test.json`
`log.level`	Defines the type and severity of a logged event	`Warning`
`debug.enabled`	Enable debug	`false`
`initContainers.checkDB.image.repository`	check-db initContainer image repository	`onlyoffice/docs-utils`
`initContainers.checkDB.image.tag`	check-db initContainer image tag. If set to, it takes priority over the `images.tag`	`7.5.1-2`
`initContainers.checkDB.image.pullPolicy`	check-db initContainer image pull policy	`IfNotPresent`
`initContainers.checkDB.resources.requests.memory`	The requested Memory for the check-db initContainer	`256Mi`
`initContainers.checkDB.resources.requests.cpu`	The requested CPU for the check-db initContainer	`100m`
`initContainers.checkDB.resources.limits.memory`	The Memory limits for the check-db initContainer	`1Gi`
`initContainers.checkDB.resources.limits.cpu`	The CPU limits for the check-db initContainer	`1000m`
`initContainers.waitStorage.image.repository`	app-wait-storage initContainer image repository	`onlyoffice/docspace-wait-bin-share`
`initContainers.waitStorage.image.tag`	app-wait-storage initContainer image tag. If set to, it takes priority over the `images.tag`	`""`
`initContainers.waitStorage.image.pullPolicy`	app-wait-storage initContainer image pull policy	`IfNotPresent`
`initContainers.waitStorage.resources.requests.memory`	The requested Memory for the app-wait-storage initContainer	`256Mi`
`initContainers.waitStorage.resources.requests.cpu`	The requested CPU for the app-wait-storage initContainer	`100m`
`initContainers.waitStorage.resources.limits.memory`	The Memory limits for the app-wait-storage initContainer	`1Gi`
`initContainers.waitStorage.resources.limits.cpu`	The CPU limits for the app-wait-storage initContainer	`1000m`
`initContainers.initStorage.image.repository`	app-init-storage initContainer image repository	`onlyoffice/docspace-bin-share`
`initContainers.initStorage.image.tag`	app-init-storage initContainer image tag. If set to, it takes priority over the `images.tag`	`""`
`initContainers.initStorage.image.pullPolicy`	app-init-storage initContainer image pull policy	`IfNotPresent`
`initContainers.initStorage.resources.requests.memory`	The requested Memory for the app-init-storage initContainer	`256Mi`
`initContainers.initStorage.resources.requests.cpu`	The requested CPU for the app-init-storage initContainer	`100m`
`initContainers.initStorage.resources.limits.memory`	The Memory limits for the app-init-storage initContainer	`2Gi`
`initContainers.initStorage.resources.limits.cpu`	The CPU limits for the app-init-storage initContainer	`1000m`
`initContainers.custom`	Defines custom containers that run before ONLYOFFICE DocSpace containers in a Pods. For example, a container that changes the owner of the PersistentVolume. For the `Docs`, `Router`, `Opensearch` and `Proxy Frontend` services, the corresponding individual parameters are used	`[]`
`persistence.storageClass`	PVC Storage Class for ONLYOFFICE DocSpace data volume	`nfs`
`persistence.docspaceData.existingClaim`	The name of the existing PVC for storing files common to all services. If not specified, a PVC named "docspace-data" will be created	`""`
`persistence.docspaceData.annotations`	Defines annotations that will be additionally added to common files PVC. If set to, it takes priority over the `commonAnnotations`	`{}`
`persistence.docspaceData.size`	PVC Storage Request for common files volume	`8Gi`
`persistence.filesData.existingClaim`	The name of the existing PVC for use in the Files service. If not specified, a PVC named "files-data" will be created	`""`
`persistence.filesData.annotations`	Defines annotations that will be additionally added to Files PVC. If set to, it takes priority over the `commonAnnotations`	`{}`
`persistence.filesData.size`	PVC Storage Request for Files volume	`2Gi`
`persistence.peopleData.existingClaim`	The name of the existing PVC for use in the People Server service. If not specified, a PVC named "people-data" will be created	`""`
`persistence.peopleData.annotations`	Defines annotations that will be additionally added to People Server PVC. If set to, it takes priority over the `commonAnnotations`	`{}`
`persistence.peopleData.size`	PVC Storage Request for People Server volume	`2Gi`
`persistence.routerLog.existingClaim`	The name of the existing PVC for storing Nginx logs of the Router service. If not specified, a PVC named "router-log" will be created	`""`
`persistence.routerLog.annotations`	Defines annotations that will be additionally added to Nginx logs PVC. If set to, it takes priority over the `commonAnnotations`	`{}`
`persistence.routerLog.size`	PVC Storage Request for Nginx logs volume	`5Gi`
`podAntiAffinity.type`	Types of Pod antiaffinity. Allowed values: `preferred` or `required`	`preferred`
`podAntiAffinity.topologyKey`	Node label key to match	`kubernetes.io/hostname`
`podAntiAffinity.weight`	Priority when selecting node. It is in the range from 1 to 100. Used only when `podAntiAffinity.type=preferred`	`100`

ONLYOFFICE DocSpace Application* parameters

Parameter	Description	Default
`Application.enabled`	Enables Application installation	`true`
`Application.kind`	The controller used for deploy. Possible values are `Deployment` (default) or `StatefulSet`. Not used in `docs` and `opensearch`	`Deployment`
`Application.annotations`	Defines annotations that will be additionally added to Application deploy. If set to, it takes priority over the `commonAnnotations`	`{}`
`Application.replicaCount`	Number of "Application" replicas to deploy. Not used in `docs` and `opensearch`	`2`
`Application.updateStrategy.type`	"Application" update strategy type	`RollingUpdate`
`Application.updateStrategy.rollingUpdate.maxUnavailable`	Maximum number of "Application" Pods unavailable during the update process	`25%`
`Application.updateStrategy.rollingUpdate.maxSurge`	Maximum number of "Application" Pods created over the desired number of Pods	`25%`
`Application.podManagementPolicy`	The Application Pods scaling operations policy. Used if `Application.kind` is set to `StatefulSet`. Not used in `docs` and `opensearch`	`OrderedReady`
`Application.podAnnotations`	Map of annotations to add to the "Application" pods. If set to, it takes priority over the `podAnnotations`	`{}`
`Application.podSecurityContext.enabled`	Enable security context for the "Application" pods. If set to, it takes priority over the `podSecurityContext`	`false`
`Application.customPodAntiAffinity`	Prohibiting the scheduling of Api System Pods relative to other Pods containing the specified labels on the same node	`{}`
`Application.podAffinity`	Defines Pod affinity rules for "Application" Pods scheduling by nodes relative to other Pods	`{}`
`Application.nodeAffinity`	Defines Node affinity rules for "Application" Pods scheduling by nodes	`{}`
`Application.nodeSelector`	Node labels for Api System pods assignment. If set to, it takes priority over the `nodeSelector`	`{}`
`Application.tolerations`	Tolerations for Api System pods assignment. If set to, it takes priority over the `tolerations`	`[]`
`Application.image.repository`	"Application" container image repository. Individual values for `proxyFrontend`, `docs` and `opensearch`	`onlyoffice/docspace-Application`
`Application.image.tag`	"Application" container image tag. If set to, it takes priority over the `images.tag`. Individual values for `proxyFrontend`, `docs` and `opensearch`	`""`
`Application.image.pullPolicy`	"Application" container image pull policy	`IfNotPresent`
`Application.containerSecurityContext.enabled`	Enable security context for containers in "Application" pods. If set to, it takes priority over the `containerSecurityContext`	`false`
`Application.lifecycleHooks`	Defines the Backup container lifecycle hooks. It is used to trigger events to run at certain points in a container's lifecycle	`{}`
`Application.containerPorts.app`	"Application" container port. Not used in `router`, `login` and `proxyFrontend`	`5050`
`Application.startupProbe.enabled`	Enable startupProbe for "Application" container	`true`
`Application.readinessProbe.enabled`	Enable readinessProbe for "Application" container	`true`
`Application.livenessProbe.enabled`	Enable livenessProbe for "Application" container	`true`
`Application.resources.requests`	The requested resources for the "Application" container	`memory, cpu`
`Application.resources.limits`	The resources limits for the "Application" container	`memory, cpu`

Application* Note: Since all available Applications have some identical parameters, a description for each of them has not been added to the table, but combined into one. Instead of Application, the parameter name should have the following values: files, peopleServer, router, healthchecks, apiSystem, api, backup, backupBackgroundTasks, clearEvents, doceditor, filesServices, login, notify, socket, ssoauth, studio, studioNotify, proxyFrontend, docs and opensearch.

ONLYOFFICE DocSpace Router Application additional parameters

Parameter	Description	Default
`router.initContainers`	Defines containers that run before Router container in the Router pod	`[]`
`router.containerPorts.external`	Router container port	`8092`
`router.extraConf.customInitScripts.configMap`	The name of the ConfigMap containing custom initialization scripts	`""`
`router.extraConf.customInitScripts.fileName`	The names of scripts containing custom initialization scripts. Must be the same as the `key` names in `router.extraConf.customInitScripts.configMap`. May contain multiple values	`60-custom-init-scripts.sh`
`router.extraConf.templates.configMap`	The name of the ConfigMap containing configuration file templates containing environment variables. The values of these variables will be substituted when the container is started	`""`
`router.extraConf.templates.fileName`	The names of the configuration file templates containing environment variables. Must be the same as the `key` names in `router.extraConf.templates.configMap`. May contain multiple values	`10.example.conf.template`
`router.extraConf.confd.configMap`	The name of the ConfigMap containing additional custom configuration files. These files will be map in the `/etc/nginx/conf.d/` directory of the container	`""`
`router.extraConf.confd.fileName`	The names of the configuration files containing custom configuration files. Must be the same as the `key` names in `router.extraConf.confd.configMap`. May contain multiple values	`example.conf`
`router.service.existing`	The name of an existing service for Router. If not set, a service named `router` will be created	`""`
`router.service.annotations`	Map of annotations to add to the Router service	`{}`
`router.service.port.external`	Router service port	`8092`
`router.service.type`	Router service type	`ClusterIP`
`router.service.sessionAffinity`	Session Affinity for Router service. If not set, `None` will be set as the default value	`""`
`router.service.sessionAffinityConfig`	Configuration for Router service Session Affinity. Used if the `router.service.sessionAffinity` is set	`{}`
`router.service.externalTrafficPolicy`	Enable preservation of the client source IP. There are two available options: `Cluster` (default) and `Local`. Not supported for service type - `ClusterIP`	`""`
`router.resolver.dns`	Configures name server used to resolve names of upstream servers into addresses. If set to, it takes priority over the `router.resolver.local`	`""`
`router.resolver.local`	Allows you to use the DNS configuration of the container. If set to `on`, the standard path "/etc/resolv.conf" will be used. You can specify an arbitrary path	`on`

ONLYOFFICE DocSpace Doceditor Application additional parameters

Parameter	Description	Default
`doceditor.containerPorts.doceditor`	Doceditor container port	`5013`

ONLYOFFICE DocSpace Login Application additional parameters

Parameter	Description	Default
`login.containerPorts.login`	Login container port	`5011`

ONLYOFFICE DocSpace Socket Application additional parameters

Parameter	Description	Default
`socket.containerPorts.socket`	Socket additional container port	`9899`

ONLYOFFICE DocSpace Ssoauth Application additional parameters

Parameter	Description	Default
`ssoauth.containerPorts.sso`	Ssoauth additional container port	`9834`

ONLYOFFICE DocSpace Proxy Frontend Application additional parameters

Parameter	Description	Default
`proxyFrontend.enabled`	Enables Proxy Frontend installation	`false`
`proxyFrontend.initContainers`	Defines containers that run before Proxy Frontend container in the Proxy Frontend pod	`[]`
`proxyFrontend.image.repository`	Proxy Frontend container image repository	`nginx`
`proxyFrontend.image.tag`	Proxy Frontend container image tag	`latest`
`proxyFrontend.containerPorts.http`	Proxy Frontend HTTP container port	`80`
`proxyFrontend.containerPorts.https`	Proxy Frontend HTTPS container port	`443`
`proxyFrontend.extraConf.customConfd.configMap`	The name of the ConfigMap containing additional custom configuration files. These files will be map in the `/etc/nginx/conf.d/` directory of the container	`""`
`proxyFrontend.extraConf.customConfd.fileName`	The names of the configuration files containing additional custom configuration files. Must be the same as the `key` names in `proxyFrontend.extraConf.customConfd.configMap`. May contain multiple values	`example.conf`
`proxyFrontend.hostname`	The hostname (domainname) by which the ONLYOFFICE DocSpace will be available	`""`
`proxyFrontend.tls.secretName`	The name of the TLS secret containing the certificate and its associated key	`tls`
`proxyFrontend.tls.mountPath`	The path where the certificate and key will be mounted	`/etc/nginx/ssl`
`proxyFrontend.tls.crtName`	Name of the key containing the certificate	`cert.crt`
`proxyFrontend.tls.keyName`	Name of the key containing the key	`cert.key`
`proxyFrontend.service.existing`	The name of an existing service for Proxy Frontend. If not set, a service named `proxy-frontend` will be created	`""`
`proxyFrontend.service.annotations`	Map of annotations to add to the Proxy Frontend service	`{}`
`proxyFrontend.service.type`	Proxy Frontend service type	`LoadBalancer`
`proxyFrontend.service.sessionAffinity`	Session Affinity for Proxy Frontend. service. If not set, `None` will be set as the default value	`""`
`proxyFrontend.service.sessionAffinityConfig`	Configuration for Proxy Frontend service Session Affinity. Used if the `proxyFrontend.service.sessionAffinity` is set	`{}`
`proxyFrontend.service.externalTrafficPolicy`	Enable preservation of the client source IP. There are two available options: `Cluster` (default) and `Local`. Not supported for service type - `ClusterIP`	`""`

ONLYOFFICE DocSpace Document Server StatefulSet additional parameters

Parameter	Description	Default
`docs.enabled`	Enables local installation of Document Server in k8s cluster	`true`
`docs.initContainers`	Defines containers that run before Document Server container in the Document Server pod	`[]`
`docs.image.repository`	Document Server container image repository	`onlyoffice/documentserver`
`docs.image.tag`	Document Server container image tag	`7.4.0`
`docs.containerPorts.http`	Document Server HTTP container port	`80`
`docs.containerPorts.https`	Document Server HTTPS container port	`443`
`docs.containerPorts.docservice`	Document Server docservice container port	`8000`

ONLYOFFICE DocSpace Ingress parameters

Parameter	Description	Default
`ingress.enabled`	Enable the creation of an ingress for the ONLYOFFICE DocSpace	`false`
`ingress.annotations`	Map of annotations to add to the Ingress	`kubernetes.io/ingress.class: nginx`, `nginx.ingress.kubernetes.io/proxy-body-size: 100m`
`ingress.ingressClassName`	Used to reference the IngressClass that should be used to implement this Ingress	`nginx`
`ingress.tls.enabled`	Enable TLS for the ONLYOFFICE DocSpace	`false`
`ingress.tls.secretName`	Secret name for TLS to mount into the Ingress	`tls`
`ingress.host`	Ingress hostname for the ONLYOFFICE DocSpace	`""`

ONLYOFFICE DocSpace Jobs parameters

Parameter	Description	Default
`install.job.enabled`	Enable the execution of job pre-install before installing ONLYOFFICE DocSpace	`true`
`install.job.annotations`	Defines annotations that will be additionally added to Install Job. If set to, it takes priority over the `commonAnnotations`	`{}`
`install.job.podAnnotations`	Map of annotations to add to the Install Job Pod. If set to, it takes priority over the `podAnnotations`	`{}`
`install.job.podSecurityContext.enabled`	Enable security context for the Install Job pod	`false`
`install.job.customPodAntiAffinity`	Prohibiting the scheduling of Install Job Pod relative to other Pods containing the specified labels on the same node	`{}`
`install.job.podAffinity`	Defines Pod affinity rules for Install Job Pod scheduling by nodes relative to other Pods	`{}`
`install.job.nodeAffinity`	Defines Node affinity rules for Install Job Pod scheduling by nodes	`{}`
`install.job.nodeSelector`	Node labels for Install Job pod assignment. If set to, it takes priority over the `nodeSelector`	`{}`
`install.job.tolerations`	Tolerations for Install Job pod assignment. If set to, it takes priority over the `tolerations`	`[]`
`install.job.containerSecurityContext.enabled`	Enable security context for containers in Install Job pod	`false`
`install.job.initContainers.migrationRunner.enabled`	Enable database initialization	`true`
`install.job.initContainers.migrationRunner.image.repository`	Job by pre-install Migration Runner container image repository	`onlyoffice/docspace-migration-runner`
`install.job.initContainers.migrationRunner.image.tag`	Job by pre-install Migration Runner container image tag. If set to, it takes priority over the `images.tag`	`""`
`install.job.initContainers.migrationRunner.image.pullPolicy`	Job by pre-install Migration Runner container image pull policy	`IfNotPresent`
`install.job.initContainers.migrationRunner.resources.requests`	The requested resources for the Job pre-install Migration Runner container	`memory, cpu`
`install.job.initContainers.migrationRunner.resources.limits`	The resources limits for the Job pre-install Migration Runner container	`memory, cpu`
`upgrade.job.enabled`	Enable the execution of job pre-upgrade before upgrading ONLYOFFICE DocSpace	`true`
`upgrade.job.annotations`	Defines annotations that will be additionally added to Upgrade Job. If set to, it takes priority over the `commonAnnotations`	`{}`
`upgrade.job.podAnnotations`	Map of annotations to add to the Upgrade Job Pod. If set to, it takes priority over the `podAnnotations`	`{}`
`upgrade.job.podSecurityContext.enabled`	Enable security context for the Upgrade Job pod	`false`
`upgrade.job.customPodAntiAffinity`	Prohibiting the scheduling of Upgrade Job Pod relative to other Pods containing the specified labels on the same node	`{}`
`upgrade.job.podAffinity`	Defines Pod affinity rules for Upgrade Job Pod scheduling by nodes relative to other Pods	`{}`
`upgrade.job.nodeAffinity`	Defines Node affinity rules for Upgrade Job Pod scheduling by nodes	`{}`
`upgrade.job.nodeSelector`	Node labels for Upgrade Job pod assignment. If set to, it takes priority over the `nodeSelector`	`{}`
`upgrade.job.tolerations`	Tolerations for Upgrade Job pod assignment. If set to, it takes priority over the `tolerations`	`[]`
`upgrade.job.containerSecurityContext.enabled`	Enable security context for containers in Upgrade Job pod	`false`
`upgrade.job.initContainers.migrationRunner.enabled`	Enable database update	`true`
`upgrade.job.initContainers.migrationRunner.image.repository`	Job by pre-upgrade Migration Runner container image repository	`onlyoffice/docspace-migration-runner`
`upgrade.job.initContainers.migrationRunner.image.tag`	Job by pre-upgrade Migration Runner container image tag. If set to, it takes priority over the `images.tag`	`""`
`upgrade.job.initContainers.migrationRunner.image.pullPolicy`	Job by pre-upgrade Migration Runner container image pull policy	`IfNotPresent`
`upgrade.job.initContainers.migrationRunner.resources.requests`	The requested resources for the Job pre-upgrade Migration Runner container	`memory, cpu`
`upgrade.job.initContainers.migrationRunner.resources.limits`	The resources limits for the Job pre-upgrade Migration Runner container	`memory, cpu`
`elasticsearchClearIndexes.job.enabled`	Enable the execution of job elasticsearchClearIndexes before upgrading DocSpace. If you are using Opensearch or an external Elasticsearch, you can set it to `false`	`true`
`elasticsearchClearIndexes.job.annotations`	Defines annotations that will be additionally added to elasticsearchClearIndexes Job. If set to, it takes priority over the `commonAnnotations`	`{}`
`elasticsearchClearIndexes.job.podAnnotations`	Map of annotations to add to the elasticsearchClearIndexes Job Pod. If set to, it takes priority over the `podAnnotations`	`{}`
`elasticsearchClearIndexes.job.podSecurityContext.enabled`	Enable security context for the elasticsearchClearIndexes Job pod	`false`
`elasticsearchClearIndexes.job.customPodAntiAffinity`	Prohibiting the scheduling of elasticsearchClearIndexes Job Pod relative to other Pods containing the specified labels on the same node	`{}`
`elasticsearchClearIndexes.job.podAffinity`	Defines Pod affinity rules for elasticsearchClearIndexes Job Pod scheduling by nodes relative to other Pods	`{}`
`elasticsearchClearIndexes.job.nodeAffinity`	Defines Node affinity rules for elasticsearchClearIndexes Job Pod scheduling by nodes	`{}`
`elasticsearchClearIndexes.job.nodeSelector`	Node labels for elasticsearchClearIndexes Job pod assignment. If set to, it takes priority over the `nodeSelector`	`{}`
`elasticsearchClearIndexes.job.tolerations`	Tolerations for elasticsearchClearIndexes Job pod assignment. If set to, it takes priority over the `tolerations`	`[]`
`elasticsearchClearIndexes.job.containerSecurityContext.enabled`	Enable security context for containers in elasticsearchClearIndexes Job pod	`false`
`elasticsearchClearIndexes.job.resources.requests`	The requested resources for the Job elasticsearchClearIndexes container	`memory, cpu`
`elasticsearchClearIndexes.job.resources.limits`	The resources limits for the Job elasticsearchClearIndexes container	`memory, cpu`

ONLYOFFICE DocSpace Opensearch parameters

Parameter	Description	Default
`opensearch.enabled`	Enables Opensearch installation	`true`
`opensearch.initContainers.securityContext.enabled`	Enable security context for Opensearch change-volume-owner initContainer container in pod	`false`
`opensearch.initContainers.resources.requests`	The requested resources for the Opensearch change-volume-owner initContainer	`memory, cpu`
`opensearch.initContainers.resources.limits`	The resources limits for the Opensearch change-volume-owner initContainer	`memory, cpu`
`opensearch.initContainers.custom`	Custom Opensearch initContainers parameters. Additional containers that run before Elasticsearch container in a Pod	`[]`
`opensearch.image.repository`	Opensearch container image repository	`onlyoffice/opensearch`
`opensearch.image.tag`	Opensearch container image tag	`7.16.3`
`opensearch.persistence.annotations`	Defines annotations that will be additionally added to Opensearch PVC. If set to, it takes priority over the `commonAnnotations`	`{}`
`opensearch.persistence.storageClass`	PVC Storage Class for Opensearch volume	`"nfs"`
`opensearch.persistence.accessModes`	Opensearch Persistent Volume access modes	`ReadWriteOnce`
`opensearch.persistence.size`	PVC Storage Request for Opensearch volume	`30Gi`
`opensearch.env.discoveryType`	Determines the cluster discovery type. Set to "single-node" for a single-node cluster	`single-node
`opensearch.env.disableSecurityPlugin`	disables the security plugin	`true`
`opensearch.env.disableInstallDemoConfig`	disables the installation of demo configuration	`true`
`opensearch.env.bootstrapMemoryLock`	determines whether JVM should lock memory	`true`
`opensearch.env.ESJAVAOPTS`	defines JVM options	`-Xms2g -Xmx2g -Dlog4j2.formatMsgNoLookups=true`
`opensearch.env.indicesFieldDataCacheSize`	sets the size of the index field data cache	`30%`
`opensearch.env.indicesMemoryIndexBufferSize`	sets the size of the in-memory index buffer	`30%`

ONLYOFFICE DocSpace Test parameters

Parameter	Description	Default
`tests.enabled`	Enable the resources creation necessary for ONLYOFFICE DocSpace launch testing and connected dependencies availability testing. These resources will be used when running the `helm test` command	`true`
`tests.annotations`	Defines annotations that will be additionally added to Test Pod. If set to, it takes priority over the `commonAnnotations`	`{}`
`tests.podSecurityContext.enabled`	Enable security context for the Test pod	`false`
`tests.customPodAntiAffinity`	Prohibiting the scheduling of Test Pod relative to other Pods containing the specified labels on the same node	`{}`
`tests.podAffinity`	Defines Pod affinity rules for Test Pod scheduling by nodes relative to other Pods	`{}`
`tests.nodeAffinity`	Defines Node affinity rules for Test Pod scheduling by nodes	`{}`
`tests.nodeSelector`	Node labels for Test pod assignment. If set to, it takes priority over the `nodeSelector`	`{}`
`tests.tolerations`	Tolerations for Test pod assignment. If set to, it takes priority over the `tolerations`	`[]`
`tests.image.repository`	Test container image name	`onlyoffice/docs-utils`
`tests.image.tag`	Test container image tag	`8.0.1-1`
`tests.image.pullPolicy`	Test container image pull policy	`IfNotPresent`
`tests.containerSecurityContext.enabled`	Enable security context for the Test container	`false`
`tests.resources.requests`	The requested resources for the Test container	`memory: "256Mi"`, `cpu: "200m"`
`tests.resources.limits`	The resources limits for the Test container	`memory: "1Gi"`, `cpu: "1000m"`

Configuration and installation details

1. Expose ONLYOFFICE DocSpace

1.1 Expose ONLYOFFICE DocSpace via Service (HTTP Only)

You should skip step[#1.1] if you are going to expose ONLYOFFICE DocSpace via HTTPS

This type of exposure has the least overheads of performance, it creates a loadbalancer to get access to ONLYOFFICE DocSpace. Use this type of exposure if you use external TLS termination, and don't have another WEB application in the k8s cluster.

To expose ONLYOFFICE DocSpace via service, set the router.service.type parameter to LoadBalancer:

$ helm install [RELEASE_NAME] onlyoffice/docspace --set router.service.type=LoadBalancer,router.service.port.external=8092

Run the following command to get the router service IP:

$ kubectl get service router -o jsonpath="{.status.loadBalancer.ingress[*].ip}"

After that, ONLYOFFICE DocSpace will be available at http://DOCSPACE-SERVICE-IP/.

If the service IP is empty, try getting the router service hostname:

$ kubectl get service router -o jsonpath="{.status.loadBalancer.ingress[*].hostname}"

In this case, ONLYOFFICE DocSpace will be available at http://DOCSPACE-SERVICE-HOSTNAME/.

1.2 Expose ONLYOFFICE DocSpace via Ingress

1.2.1 Installing the Kubernetes Nginx Ingress Controller

To install the Nginx Ingress Controller to your cluster, run the following command:

$ helm install nginx-ingress ingress-nginx/ingress-nginx --set controller.publishService.enabled=true,controller.replicaCount=2

See more detail about installing Nginx Ingress Controller via Helm here.

1.2.2 Expose ONLYOFFICE DocSpace via HTTP

You should skip step[2.1.2] if you are going to expose ONLYOFFICE DocSpace via HTTPS

This type of exposure has more overheads of performance compared with exposure via service, it also creates a loadbalancer to get access to ONLYOFFICE DocSpace. Use this type if you use external TLS termination and when you have several WEB applications in the k8s cluster. You can use the one set of ingress instances and the one loadbalancer for those. It can optimize the entry point performance and reduce your cluster payments, cause providers can charge a fee for each loadbalancer.

To expose ONLYOFFICE DocSpace via ingress HTTP, set the ingress.enabled parameter to true:

$ helm install [RELEASE_NAME] onlyoffice/docspace --set ingress.enabled=true

Run the following command to get the docspace ingress IP:

$ kubectl get ingress docspace -o jsonpath="{.status.loadBalancer.ingress[*].ip}"

After that, ONLYOFFICE DocSpace will be available at http://DOCSPACE-INGRESS-IP/.

If the ingress IP is empty, try getting the docspace ingress hostname:

$ kubectl get ingress docspace -o jsonpath="{.status.loadBalancer.ingress[*].hostname}"

In this case, ONLYOFFICE DocSpace will be available at http://DOCSPACE-INGRESS-HOSTNAME/.

1.2.3 Expose ONLYOFFICE DocSpace via HTTPS

This type of exposure allows you to enable internal TLS termination for ONLYOFFICE DocSpace.

Create the tls secret with an ssl certificate inside.

Put the ssl certificate and the private key into the tls.crt and tls.key files and then run:

$ kubectl create secret generic tls \
  --from-file=./tls.crt \
  --from-file=./tls.key

$ helm install [RELEASE_NAME] onlyoffice/docspace --set ingress.enabled=true,ingress.tls.enabled=true,ingress.tls.secretName=tls,ingress.host=example.com

Run the following command to get the docspace ingress IP:

$ kubectl get ingress docspace -o jsonpath="{.status.loadBalancer.ingress[*].ip}"

If the ingress IP is empty, try getting the docspace ingress hostname:

$ kubectl get ingress docspace -o jsonpath="{.status.loadBalancer.ingress[*].hostname}"

Associate the docspace ingress IP or hostname with your domain name through your DNS provider.

After that, ONLYOFFICE DocSpace will be available at https://your-domain-name/.

2. Transition from ElasticSearch to OpenSearch

In ONLYOFFICE DocSpace appVersion 2.5.0, ElasticSearch is being replaced with OpenSearch, which will require reindexing, taking some time.

For proper reindexing before updating ONLYOFFICE DocSpace to version 2.5.0, execute the following command:

If file-services is deployed as a StatefulSet:

kubectl scale statefulset files-services --replicas=0

Otherwise, if deployed as a Deployment:

kubectl scale deployment files-services --replicas=0

Then proceed with the ONLYOFFICE DocSpace update.

NOTE: If you have an external Elasticsearch installed, please follow these steps before updating:

Reduce the replica count of files-services to 0, as described above.
In the configmap and job files named elasticsearch-clear-indexes.yaml, replace the values in spec.template.spec.containers.env[(name=="MYSQL_PASSWORD")].value and, if necessary, in spec.template.spec.containers.env[(name=="MYSQL_USER")].value with your own values.
Apply these files elasticsearch-clear-indexes.yaml:

kubectl apply -f https://raw.githubusercontent.com/ONLYOFFICE/Kubernetes-DocSpace/main/sources/elasticsearch-clear-indexes.yaml

After successfully executing the Pod elasticsearch-clear-indexes that created the Job, delete this Job with the following command:

kubectl delete -f https://raw.githubusercontent.com/ONLYOFFICE/Kubernetes-DocSpace/main/sources/elasticsearch-clear-indexes.yaml

ONLYOFFICE DocSpace installation test (optional)

You can test ONLYOFFICE DocSpace services availability and access to connected dependencies by running the following command:

$ helm test [RELEASE_NAME] -n <NAMESPACE>

The output should have the following line:

Phase: Succeeded

To view the log of the Pod running as a result of the helm test command, run the following command:

$ kubectl logs -f test-docspace -n <NAMESPACE>

The ONLYOFFICE DocSpace services availability check is considered a priority, so if it fails with an error, the test is considered to be failed.

After this, you can delete the test-docspace Pod by running the following command:

$ kubectl delete pod test-docspace -n <NAMESPACE>

Note: This testing is for informational purposes only and cannot guarantee 100% availability results. It may be that even though all checks are completed successfully, an error occurs in the application. In this case, more detailed information can be found in the application logs.

Name		Name	Last commit message	Last commit date
Latest commit History 143 Commits
.github/workflows		.github/workflows
sources		sources
templates		templates
.helmignore		.helmignore
CHANGELOG.md		CHANGELOG.md
Chart.yaml		Chart.yaml
LICENSE		LICENSE
README.md		README.md
values.yaml		values.yaml

License

ONLYOFFICE/Kubernetes-DocSpace

Folders and files

Latest commit

History

Repository files navigation