Mods to MYNN sfc and PBL for fractional/coupled for latest gsd/develop code (based on #40)

physics/module_MYNNPBL_wrapper.F90

@@ -60,6 +60,10 @@ SUBROUTINE mynnedmf_wrapper_run(        &
      &  dtsfci_diag,dqsfci_diag,        &
      &  dusfc_diag,dvsfc_diag,          &
      &  dtsfc_diag,dqsfc_diag,          &
+     &  dusfc_cice,dvsfc_cice,          &
+     &  dtsfc_cice,dqsfc_cice,          &
+     &  hflx_ocn,qflx_ocn,stress_ocn,   &
+     &  oceanfrac,fice,wet,icy,dry,     &
      &  dusfci_cpl,dvsfci_cpl,          &
      &  dtsfci_cpl,dqsfci_cpl,          &
      &  dusfc_cpl,dvsfc_cpl,            &
@@ -175,6 +179,9 @@ SUBROUTINE mynnedmf_wrapper_run(        &
   REAL, PARAMETER :: TKmin=253.0    !< for total water conversion, Tripoli and Cotton (1981)
   REAL, PARAMETER :: tv0=p608*tref, tv1=(1.+p608)*tref, gtr=g/tref, g_inv=1./g
 
+  REAL, PARAMETER :: zero=0.0d0, one=1.0d0
+  REAL, PARAMETER :: huge=9.9692099683868690E36 ! NetCDF float FillValue, same as in GFS_typedefs.F90
+
   character(len=*), intent(out) :: errmsg
   integer, intent(out) :: errflg
 
@@ -279,6 +286,14 @@ SUBROUTINE mynnedmf_wrapper_run(        &
      &        dx,zorl,slmsk,tsurf,qsfc,ps,                               &
      &        hflx,qflx,ust,wspd,rb,recmol
 
+      real(kind=kind_phys), dimension(im), intent(in) ::                 &
+     &        dusfc_cice,dvsfc_cice,dtsfc_cice,dqsfc_cice,               &
+     &        stress_ocn,hflx_ocn,qflx_ocn,                              &
+     &        oceanfrac,fice
+
+      logical, dimension(im), intent(in) ::                              &
+     &        wet, dry, icy
+
       real(kind=kind_phys), dimension(im), intent(inout) ::              &
      &        pblh
       real(kind=kind_phys), dimension(im), intent(out) ::                &
@@ -509,19 +524,6 @@ SUBROUTINE mynnedmf_wrapper_run(        &
          dusfc_diag(i)  = dusfc_diag(i) + dusfci_diag(i)*delt
          dvsfc_diag(i)  = dvsfc_diag(i) + dvsfci_diag(i)*delt
 
-         ! BWG: Coupling insertion
-         if(cplflx) then
-           dusfci_cpl(i) = dusfci_diag(i)
-           dvsfci_cpl(i) = dvsfci_diag(i)
-           dtsfci_cpl(i) = dtsfci_diag(i)
-           dqsfci_cpl(i) = dqsfci_diag(i)
-
-           dusfc_cpl(i) = dusfc_cpl(i) + dusfci_cpl(i)*delt
-           dvsfc_cpl(i) = dvsfc_cpl(i) + dvsfci_cpl(i)*delt
-           dtsfc_cpl(i) = dtsfc_cpl(i) + dtsfci_cpl(i)*delt
-           dqsfc_cpl(i) = dqsfc_cpl(i) + dqsfci_cpl(i)*delt
-         endif
-
          znt(i)=zorl(i)*0.01 !cm -> m?
          if (do_mynnsfclay) then
            rmol(i)=recmol(i)
@@ -543,6 +545,45 @@ SUBROUTINE mynnedmf_wrapper_run(        &
 !        wspd(i)=wind(i)
       enddo
 
+      ! BWG: Coupling insertion
+      if (cplflx) then
+        do i=1,im
+          if (oceanfrac(i) > zero) then ! Ocean only, NO LAKES
+            if ( .not. wet(i)) then ! no open water, use results from CICE
+              dusfci_cpl(i) = dusfc_cice(i)
+              dvsfci_cpl(i) = dvsfc_cice(i)
+              dtsfci_cpl(i) = dtsfc_cice(i)
+              dqsfci_cpl(i) = dqsfc_cice(i)
+            elseif (icy(i) .or. dry(i)) then ! use stress_ocean for opw component at mixed point
+              if (wspd(i) > zero) then
+                dusfci_cpl(i) = -1.*rho(i,1)*stress_ocn(i)*u(i,1)/wspd(i)   ! U-momentum flux
+                dvsfci_cpl(i) = -1.*rho(i,1)*stress_ocn(i)*v(i,1)/wspd(i)   ! V-momentum flux
+              else
+                dusfci_cpl(i) = zero
+                dvsfci_cpl(i) = zero
+              endif
+              dtsfci_cpl(i) =  cp*rho(i,1)*hflx_ocn(i) ! sensible heat flux over open ocean
+              dqsfci_cpl(i) = XLV*rho(i,1)*qflx_ocn(i) ! latent heat flux over open ocean
+            else                                       ! use results from this scheme for 100% open ocean
+              dusfci_cpl(i) = dusfci_diag(i)
+              dvsfci_cpl(i) = dvsfci_diag(i)
+              dtsfci_cpl(i) = dtsfci_diag(i)
+              dqsfci_cpl(i) = dqsfci_diag(i)
+            endif
+!
+            dusfc_cpl (i) = dusfc_cpl(i) + dusfci_cpl(i) * delt
+            dvsfc_cpl (i) = dvsfc_cpl(i) + dvsfci_cpl(i) * delt
+            dtsfc_cpl (i) = dtsfc_cpl(i) + dtsfci_cpl(i) * delt
+            dqsfc_cpl (i) = dqsfc_cpl(i) + dqsfci_cpl(i) * delt
+          else ! If no ocean
+            dusfc_cpl(i) = huge
+            dvsfc_cpl(i) = huge
+            dtsfc_cpl(i) = huge
+            dqsfc_cpl(i) = huge
+          endif ! Ocean only, NO LAKES
+        enddo
+      endif ! End coupling insertion
+
       if (lprnt) then
          print*
          write(0,*)"===CALLING mynn_bl_driver; input:"

physics/module_MYNNPBL_wrapper.meta

@@ -478,6 +478,111 @@
   kind = kind_phys
   intent = inout
   optional = F
+[dusfc_cice]
+  standard_name = surface_x_momentum_flux_for_coupling
+  long_name = sfc x momentum flux for coupling
+  units = Pa
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[dvsfc_cice]
+  standard_name = surface_y_momentum_flux_for_coupling
+  long_name = sfc y momentum flux for coupling
+  units = Pa
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[dtsfc_cice]
+  standard_name = surface_upward_sensible_heat_flux_for_coupling
+  long_name = sfc sensible heat flux for coupling
+  units = W m-2
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[dqsfc_cice]
+  standard_name = surface_upward_latent_heat_flux_for_coupling
+  long_name = sfc latent heat flux for coupling
+  units = W m-2
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[hflx_ocn]
+  standard_name = kinematic_surface_upward_sensible_heat_flux_over_ocean
+  long_name = kinematic surface upward sensible heat flux over ocean
+  units = K m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[qflx_ocn]
+  standard_name = kinematic_surface_upward_latent_heat_flux_over_ocean
+  long_name = kinematic surface upward latent heat flux over ocean
+  units = kg kg-1 m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[stress_ocn]
+  standard_name = surface_wind_stress_over_ocean
+  long_name = surface wind stress over ocean
+  units = m2 s-2
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[oceanfrac]
+  standard_name = sea_area_fraction
+  long_name = fraction of horizontal grid area occupied by ocean
+  units = frac
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[fice]
+  standard_name = sea_ice_concentration
+  long_name = ice fraction over open water
+  units = frac
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[wet]
+  standard_name = flag_nonzero_wet_surface_fraction
+  long_name = flag indicating presence of some ocean or lake surface area fraction
+  units = flag
+  dimensions = (horizontal_dimension)
+  type = logical
+  intent = in
+  optional = F
+[icy]
+  standard_name = flag_nonzero_sea_ice_surface_fraction
+  long_name = flag indicating presence of some sea ice surface area fraction
+  units = flag
+  dimensions = (horizontal_dimension)
+  type = logical
+  intent = in
+  optional = F
+[dry]
+  standard_name = flag_nonzero_land_surface_fraction
+  long_name = flag indicating presence of some land surface area fraction
+  units = flag
+  dimensions = (horizontal_dimension)
+  type = logical
+  intent = in
+  optional = F
 [dusfci_cpl]
   standard_name = instantaneous_surface_x_momentum_flux_for_coupling
   long_name = instantaneous sfc u momentum flux

physics/module_MYNNSFC_wrapper.F90

@@ -48,6 +48,8 @@ SUBROUTINE mynnsfc_wrapper_run(            &
      &      fh_ocn,    fh_lnd,    fh_ice,  &  !intent(inout)
      &    fm10_ocn,  fm10_lnd,  fm10_ice,  &  !intent(inout)
      &     fh2_ocn,   fh2_lnd,   fh2_ice,  &  !intent(inout)
+     &    hflx_ocn,  hflx_lnd,  hflx_ice,  &
+     &    qflx_ocn,  qflx_lnd,  qflx_ice,  &
      &  QSFC, qsfc_ruc, USTM, ZOL, MOL,    &
      &  RMOL, WSPD, ch, HFLX, QFLX, LH,    &
      &  FLHC, FLQC,                        &
@@ -149,6 +151,8 @@ SUBROUTINE mynnsfc_wrapper_run(            &
      &                       fh_ocn,    fh_lnd,    fh_ice,  &
      &                     fm10_ocn,  fm10_lnd,  fm10_ice,  &
      &                      fh2_ocn,   fh2_lnd,   fh2_ice,  &
+     &                     hflx_ocn,  hflx_lnd,  hflx_ice,  &
+     &                     qflx_ocn,  qflx_lnd,  qflx_ice,  &
      &                     qsfc_ocn,  qsfc_lnd,  qsfc_ice
 
 !MYNN-2D
@@ -267,6 +271,8 @@ SUBROUTINE mynnsfc_wrapper_run(            &
                    fh_ocn=fh_ocn,        fh_lnd=fh_lnd,        fh_ice=fh_ice, &  !intent(inout)
                fm10_ocn=fm10_ocn,    fm10_lnd=fm10_lnd,    fm10_ice=fm10_ice, &  !intent(inout)
                  fh2_ocn=fh2_ocn,      fh2_lnd=fh2_lnd,      fh2_ice=fh2_ice, &  !intent(inout)
+               hflx_ocn=hflx_ocn,    hflx_lnd=hflx_lnd,    hflx_ice=hflx_ice, &
+               qflx_ocn=qflx_ocn,    qflx_lnd=qflx_lnd,    qflx_ice=qflx_ice, &
              ch=ch,CHS=chs,CHS2=chs2,CQS2=cqs2,CPM=cpm,                       &
              ZNT=znt,USTM=ustm,ZOL=zol,MOL=mol,RMOL=rmol,                     &
              psim=psim,psih=psih,                                             &

physics/module_MYNNSFC_wrapper.meta

@@ -644,6 +644,60 @@
   kind = kind_phys
   intent = inout
   optional = F
+[hflx_ocn]
+  standard_name = kinematic_surface_upward_sensible_heat_flux_over_ocean
+  long_name = kinematic surface upward sensible heat flux over ocean
+  units = K m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = inout
+  optional = F
+[hflx_lnd]
+  standard_name = kinematic_surface_upward_sensible_heat_flux_over_land
+  long_name = kinematic surface upward sensible heat flux over land
+  units = K m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = inout
+  optional = F
+[hflx_ice]
+  standard_name = kinematic_surface_upward_sensible_heat_flux_over_ice
+  long_name = kinematic surface upward sensible heat flux over ice
+  units = K m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = inout
+  optional = F
+[qflx_ocn]
+  standard_name = kinematic_surface_upward_latent_heat_flux_over_ocean
+  long_name = kinematic surface upward latent heat flux over ocean
+  units = kg kg-1 m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[qflx_lnd]
+  standard_name = kinematic_surface_upward_latent_heat_flux_over_land
+  long_name = kinematic surface upward latent heat flux over land
+  units = kg kg-1 m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
+[qflx_ice]
+  standard_name = kinematic_surface_upward_latent_heat_flux_over_ice
+  long_name = kinematic surface upward latent heat flux over ice
+  units = kg kg-1 m s-1
+  dimensions = (horizontal_dimension)
+  type = real
+  kind = kind_phys
+  intent = in
+  optional = F
 [qsfc]
   standard_name = surface_specific_humidity
   long_name = surface air saturation specific humidity