Quartet of bug fixes for: c3 scheme, quilting restart with 32-bit physics, and string length mismatch in dycore plus PR #705 and #699

ccpp/data/GFS_typedefs.F90

@@ -431,13 +431,7 @@ module GFS_typedefs
 
     ! CLM Lake model internal variables:
     real (kind=kind_phys), pointer :: lake_albedo(:)     => null()  !
-    real (kind=kind_phys), pointer :: lake_z3d(:,:)     => null()  !
-    real (kind=kind_phys), pointer :: lake_dz3d(:,:)    => null()  !
-    real (kind=kind_phys), pointer :: lake_soil_watsat3d(:,:) => null()  !
-    real (kind=kind_phys), pointer :: lake_csol3d(:,:)   => null()  !
-    real (kind=kind_phys), pointer :: lake_soil_tkmg3d(:,:)   => null()  !
-    real (kind=kind_phys), pointer :: lake_soil_tkdry3d(:,:)  => null()  !
-    real (kind=kind_phys), pointer :: lake_soil_tksatu3d(:,:) => null()  !
+    real (kind=kind_phys), pointer :: input_lakedepth(:) => null()  !
     real (kind=kind_phys), pointer :: lake_h2osno2d(:)   => null()  !
     real (kind=kind_phys), pointer :: lake_sndpth2d(:)   => null()  !
     real (kind=kind_phys), pointer :: lake_snl2d(:)      => null()  !
@@ -454,8 +448,6 @@ module GFS_typedefs
     real (kind=kind_phys), pointer :: lake_icefrac3d(:,:)=> null()
     real (kind=kind_phys), pointer :: lake_rho0(:)=> null()
     real (kind=kind_phys), pointer :: lake_ht(:)=> null()
-    real (kind=kind_phys), pointer :: lake_clay3d(:,:) => null()
-    real (kind=kind_phys), pointer :: lake_sand3d(:,:) => null()
     integer, pointer :: lake_is_salty(:) => null()
     integer, pointer :: lake_cannot_freeze(:) => null()
     real (kind=kind_phys), pointer :: clm_lake_initialized(:) => null() !< lakeini was called
@@ -1501,6 +1493,9 @@ module GFS_typedefs
     integer              :: ncnvwind        !< the index of surface wind enhancement due to convection for MYNN SFC and RAS CNV in phy f2d
 
 !-- nml variables for RRFS-SD
+    real(kind=kind_phys) :: dust_drylimit_factor  !< factor for drylimit parameterization in fengsha
+    real(kind=kind_phys) :: dust_moist_correction !< factor to tune volumetric soil moisture
+    integer              :: dust_moist_opt        !< dust moisture option 1:fecan 2:shao
     real(kind=kind_phys) :: dust_alpha        !< alpha parameter for fengsha dust scheme
     real(kind=kind_phys) :: dust_gamma        !< gamma parameter for fengsha dust scheme
     real(kind=kind_phys) :: wetdep_ls_alpha   !< alpha parameter for wet deposition
@@ -2715,13 +2710,7 @@ subroutine sfcprop_create (Sfcprop, IM, Model)
        allocate(Sfcprop%lake_t2m(IM))
        allocate(Sfcprop%lake_q2m(IM))
        allocate(Sfcprop%lake_albedo(IM))
-       allocate(Sfcprop%lake_z3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_dz3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_soil_watsat3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_csol3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_soil_tkmg3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_soil_tkdry3d(IM,Model%nlevlake_clm_lake))
-       allocate(Sfcprop%lake_soil_tksatu3d(IM,Model%nlevlake_clm_lake))
+       allocate(Sfcprop%input_lakedepth(IM))
        allocate(Sfcprop%lake_h2osno2d(IM))
        allocate(Sfcprop%lake_sndpth2d(IM))
        allocate(Sfcprop%lake_snl2d(IM))
@@ -2738,22 +2727,14 @@ subroutine sfcprop_create (Sfcprop, IM, Model)
        allocate(Sfcprop%lake_icefrac3d(IM,Model%nlevlake_clm_lake))
        allocate(Sfcprop%lake_rho0(IM))
        allocate(Sfcprop%lake_ht(IM))
-       allocate(Sfcprop%lake_clay3d(IM,Model%nlevsoil_clm_lake))
-       allocate(Sfcprop%lake_sand3d(IM,Model%nlevsoil_clm_lake))
        allocate(Sfcprop%lake_is_salty(IM))
        allocate(Sfcprop%lake_cannot_freeze(IM))
        allocate(Sfcprop%clm_lake_initialized(IM))
 
        Sfcprop%lake_t2m = clear_val
        Sfcprop%lake_q2m = clear_val
        Sfcprop%lake_albedo = clear_val
-       Sfcprop%lake_z3d = clear_val
-       Sfcprop%lake_dz3d = clear_val
-       Sfcprop%lake_soil_watsat3d = clear_val
-       Sfcprop%lake_csol3d = clear_val
-       Sfcprop%lake_soil_tkmg3d = clear_val
-       Sfcprop%lake_soil_tkdry3d = clear_val
-       Sfcprop%lake_soil_tksatu3d = clear_val
+       Sfcprop%input_lakedepth = clear_val
        Sfcprop%lake_h2osno2d = clear_val
        Sfcprop%lake_sndpth2d = clear_val
        Sfcprop%lake_snl2d = clear_val
@@ -2770,8 +2751,6 @@ subroutine sfcprop_create (Sfcprop, IM, Model)
        Sfcprop%lake_icefrac3d = clear_val
        Sfcprop%lake_rho0 = -111
        Sfcprop%lake_ht = -111
-       Sfcprop%lake_clay3d = clear_val
-       Sfcprop%lake_sand3d = clear_val
        Sfcprop%lake_is_salty = zero
        Sfcprop%lake_cannot_freeze = zero
        Sfcprop%clm_lake_initialized = zero
@@ -3829,9 +3808,12 @@ subroutine control_initialize (Model, nlunit, fn_nml, me, master, &
     integer              :: ichoice_s       = 3 !< flag for closure of C3/GF shallow convection
 
 !-- chem nml variables for RRFS-SD
+    real(kind=kind_phys) :: dust_drylimit_factor  = 1.0
+    real(kind=kind_phys) :: dust_moist_correction = 1.0
     real(kind=kind_phys) :: dust_alpha = 0.
     real(kind=kind_phys) :: dust_gamma = 0.
     real(kind=kind_phys) :: wetdep_ls_alpha = 0.
+    integer :: dust_moist_opt = 1         ! fecan :1  else shao
     integer :: seas_opt = 2
     integer :: dust_opt = 5
     integer :: drydep_opt  = 1
@@ -3995,6 +3977,7 @@ subroutine control_initialize (Model, nlunit, fn_nml, me, master, &
                           !--- aerosol scavenging factors ('name:value' string array)
                                fscav_aero,                                                  &
                           !--- RRFS-SD namelist
+                               dust_drylimit_factor, dust_moist_correction, dust_moist_opt, &
                                dust_alpha, dust_gamma, wetdep_ls_alpha,                     &
                                seas_opt, dust_opt, drydep_opt, coarsepm_settling,           &
                                wetdep_ls_opt, smoke_forecast, aero_ind_fdb, aero_dir_fdb,   &
@@ -4214,6 +4197,9 @@ subroutine control_initialize (Model, nlunit, fn_nml, me, master, &
 
 !--- RRFS-SD
     Model%rrfs_sd           = rrfs_sd
+    Model%dust_drylimit_factor = dust_drylimit_factor
+    Model%dust_moist_correction = dust_moist_correction
+    Model%dust_moist_opt    = dust_moist_opt
     Model%dust_alpha        = dust_alpha
     Model%dust_gamma        = dust_gamma
     Model%wetdep_ls_alpha   = wetdep_ls_alpha
@@ -6314,6 +6300,9 @@ subroutine control_print(Model)
       if(model%rrfs_sd) then
         print *, ' '
         print *, 'smoke parameters'
+        print *, 'dust_drylimit_factor: ',Model%dust_drylimit_factor
+        print *, 'dust_moist_correction: ',Model%dust_moist_correction
+        print *, 'dust_moist_opt   : ',Model%dust_moist_opt
         print *, 'dust_alpha       : ',Model%dust_alpha
         print *, 'dust_gamma       : ',Model%dust_gamma
         print *, 'wetdep_ls_alpha  : ',Model%wetdep_ls_alpha

ccpp/data/GFS_typedefs.meta

@@ -2034,59 +2034,11 @@
   type = real
   kind = kind_phys
   active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_z3d]
-  standard_name = depth_of_lake_interface_layers
-  long_name = depth of lake interface layers
-  units = fraction
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_dz3d]
-  standard_name = thickness_of_lake_layers
-  long_name = thickness of lake layers
-  units = fraction
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_soil_watsat3d]
-  standard_name = saturated_volumetric_soil_water_in_lake_model
-  long_name = saturated volumetric soil water in lake model
-  units = m
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_csol3d]
-  standard_name = soil_heat_capacity_in_lake_model
-  long_name = soil heat capacity in lake model
-  units = m
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_soil_tkmg3d]
-  standard_name = soil_mineral_thermal_conductivity_in_lake_model
-  long_name = soil mineral thermal conductivity in lake model
+[input_lakedepth]
+  standard_name = lake_depth_before_correction
+  long_name = lake depth_before_correction
   units = m
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_soil_tkdry3d]
-  standard_name = dry_soil_thermal_conductivity_in_lake_model
-  long_name = dry soil thermal conductivity in lake model
-  units = m
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
-  type = real
-  kind = kind_phys
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_soil_tksatu3d]
-  standard_name = saturated_soil_thermal_conductivity_in_lake_model
-  long_name = saturated soil thermal conductivity in lake model
-  units = m
-  dimensions = (horizontal_loop_extent, lake_vertical_dimension_for_clm_lake_model)
+  dimensions = (horizontal_loop_extent)
   type = real
   kind = kind_phys
   active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
@@ -2218,20 +2170,6 @@
   type = real
   kind = kind_phys
   active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_clay3d]
-  standard_name = clm_lake_percent_clay
-  long_name = percent clay in clm lake model
-  units = percent
-  dimensions = (horizontal_loop_extent,soil_vertical_dimension_for_clm_lake_model)
-  type = integer
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
-[lake_sand3d]
-  standard_name = clm_lake_percent_sand
-  long_name = percent sand in clm lake model
-  units = percent
-  dimensions = (horizontal_loop_extent,soil_vertical_dimension_for_clm_lake_model)
-  type = integer
-  active = (control_for_lake_model_selection == 2 .and. control_for_lake_model_execution_method > 0)
 [lake_is_salty]
   standard_name = clm_lake_is_salty
   long_name = lake at this point is salty (1) or not (0)
@@ -6462,6 +6400,29 @@
   type = real
   kind = kind_phys
   active = (do_smoke_coupling)
+[dust_moist_correction]
+  standard_name = dust_moist_correction_fengsha_dust_scheme
+  long_name = moisture correction term for fengsha dust emission
+  units = none
+  dimensions = ()
+  type = real
+  kind = kind_phys
+  active = (do_smoke_coupling)
+[dust_drylimit_factor]
+  standard_name = dust_drylimit_factor_fengsha_dust_scheme
+  long_name = moisture correction term for drylimit in fengsha dust emission
+  units = none
+  dimensions = ()
+  type = real
+  kind = kind_phys
+  active = (do_smoke_coupling)
+[dust_moist_opt]
+  standard_name = control_for_dust_soil_moisture_option
+  long_name = smoke dust moisture parameterization 1 - fecan 2 - shao
+  units = index
+  dimensions = ()
+  type = integer
+  active = (do_smoke_coupling)
 [dust_alpha]
   standard_name = alpha_fengsha_dust_scheme
   long_name = alpha paramter for fengsha dust scheme

ccpp/driver/GFS_diagnostics.F90

@@ -4061,6 +4061,50 @@ subroutine GFS_externaldiag_populate (ExtDiag, Model, Statein, Stateout, Sfcprop
       ExtDiag(idx)%data(nb)%var2 => sfcprop(nb)%wetness(:)
     enddo
 
+    idx = idx + 1
+    ExtDiag(idx)%axes = 2
+    ExtDiag(idx)%name = 'nirbmdi'
+    ExtDiag(idx)%desc = 'sfc nir beam sw downward flux'
+    ExtDiag(idx)%unit = 'W/m**2'
+    ExtDiag(idx)%mod_name = 'gfs_sfc'
+    allocate (ExtDiag(idx)%data(nblks))
+    do nb = 1,nblks
+      ExtDiag(idx)%data(nb)%var2 => Coupling(nb)%nirbmdi(:)
+    enddo
+
+    idx = idx + 1
+    ExtDiag(idx)%axes = 2
+    ExtDiag(idx)%name = 'nirdfdi'
+    ExtDiag(idx)%desc = 'sfc nir diff sw downward flux'
+    ExtDiag(idx)%unit = 'W/m**2'
+    ExtDiag(idx)%mod_name = 'gfs_sfc'
+    allocate (ExtDiag(idx)%data(nblks))
+    do nb = 1,nblks
+      ExtDiag(idx)%data(nb)%var2 => Coupling(nb)%nirdfdi(:)
+    enddo
+
+    idx = idx + 1
+    ExtDiag(idx)%axes = 2
+    ExtDiag(idx)%name = 'visbmdi'
+    ExtDiag(idx)%desc = 'sfc uv+vis beam sw downward flux'
+    ExtDiag(idx)%unit = 'W/m**2'
+    ExtDiag(idx)%mod_name = 'gfs_sfc'
+    allocate (ExtDiag(idx)%data(nblks))
+    do nb = 1,nblks
+      ExtDiag(idx)%data(nb)%var2 => Coupling(nb)%visbmdi(:)
+    enddo
+
+    idx = idx + 1
+    ExtDiag(idx)%axes = 2
+    ExtDiag(idx)%name = 'visdfdi'
+    ExtDiag(idx)%desc = ' sfc uv+vis diff sw downward flux'
+    ExtDiag(idx)%unit = 'W/m**2'
+    ExtDiag(idx)%mod_name = 'gfs_sfc'
+    allocate (ExtDiag(idx)%data(nblks))
+    do nb = 1,nblks
+      ExtDiag(idx)%data(nb)%var2 => Coupling(nb)%visdfdi(:)
+    enddo
+
   if (Model%rdlai) then
     idx = idx + 1
     ExtDiag(idx)%axes = 2
@@ -5086,42 +5130,6 @@ subroutine clm_lake_externaldiag_populate(ExtDiag, Model, Sfcprop, idx, cn_one,
 
     integer :: nk, idx0, iblk
 
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_z3d, 'lake_z3d', 'lake_depth_on_interface_levels', 'm')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_clay3d, 'lake_clay3d', 'percent clay on soil levels in clm lake model', '%')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_sand3d, 'lake_sand3d', 'percent sand on soil levels in clm lake model', '%')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_dz3d, 'lake_dz3d', 'lake level thickness', 'm')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_soil_watsat3d, 'lake_soil_watsat3d', 'saturated volumetric soil water', 'm3 m-3')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_csol3d, 'lake_csol3d', 'soil heat capacity', 'J m-3 K-1')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_soil_tkmg3d, 'lake_soil_tkmg3d', 'soil thermal conductivity, minerals', 'W m-1 K-1')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_soil_tkdry3d, 'lake_soil_tkdry3d', 'soil thermal conductivity, dry soil', 'W m-1 K-1')
-    enddo
-
-    do iblk=1,nblks
-      call link_all_levels(Sfcprop(iblk)%lake_soil_tksatu3d, 'lake_soil_tksatu3d', 'soil thermal conductivity, saturated soil', 'W m-1 K-1')
-    enddo
-
     do iblk=1,nblks
       call link_all_levels(Sfcprop(iblk)%lake_snow_z3d, 'lake_snow_z3d', 'lake snow level depth', 'm')
     enddo

ccpp/suites/suite_FV3_GFS_v17_p8_c3.xml

@@ -13,13 +13,15 @@
   <group name="radiation">
     <subcycle loop="1">
       <scheme>GFS_suite_interstitial_rad_reset</scheme>
+      <scheme>sgscloud_radpre</scheme>
       <scheme>GFS_rrtmg_pre</scheme>
       <scheme>GFS_radiation_surface</scheme>
       <scheme>rad_sw_pre</scheme>
       <scheme>rrtmg_sw</scheme>
       <scheme>rrtmg_sw_post</scheme>
       <scheme>rrtmg_lw_pre</scheme>
       <scheme>rrtmg_lw</scheme>
+      <scheme>sgscloud_radpost</scheme>
       <scheme>rrtmg_lw_post</scheme>
       <scheme>GFS_rrtmg_post</scheme>
     </subcycle>