MAX31865 enhancements

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -74,7 +74,8 @@ void spiBegin() {
       #elif defined(PRR0)
         PRR0
       #endif
-        , PRSPI);
+      , PRSPI
+    );
 
     SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
     SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);

Marlin/src/HAL/AVR/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/DUE/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/ESP32/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/LINUX/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/SAMD51/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/TEENSY31_32/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/TEENSY35_36/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/TEENSY40_41/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/shared/Delay.h

@@ -92,6 +92,12 @@ void calibrate_delay_loop();
 
   #define DELAY_CYCLES(X) do { SmartDelay<IS_CONSTEXPR(X), IS_CONSTEXPR(X) ? X : 0> _smrtdly_X(X); } while(0)
 
+  #if GCC_VERSION <= 70000
+    #define DELAY_CYCLES_VAR(X) DelayCycleFnc(X)
+  #else
+    #define DELAY_CYCLES_VAR DELAY_CYCLES
+  #endif
+
   // For delay in microseconds, no smart delay selection is required, directly call the delay function
   // Teensy compiler is too old and does not accept smart delay compile-time / run-time selection correctly
   #define DELAY_US(x) DelayCycleFnc((x) * ((F_CPU) / 1000000UL))
@@ -200,9 +206,12 @@ void calibrate_delay_loop();
 #endif
 
 #if ENABLED(DELAY_NS_ROUND_DOWN)
-  #define DELAY_NS(x) DELAY_CYCLES((x) * ((F_CPU) / 1000000UL) / 1000UL)          // floor
+  #define _NS_TO_CYCLES(x) ( (x) * ((F_CPU) / 1000000UL)        / 1000UL) // floor
 #elif ENABLED(DELAY_NS_ROUND_CLOSEST)
-  #define DELAY_NS(x) DELAY_CYCLES(((x) * ((F_CPU) / 1000000UL) + 500) / 1000UL)  // round
+  #define _NS_TO_CYCLES(x) (((x) * ((F_CPU) / 1000000UL) + 500) / 1000UL) // round
 #else
-  #define DELAY_NS(x) DELAY_CYCLES(((x) * ((F_CPU) / 1000000UL) + 999) / 1000UL)  // "ceil"
+  #define _NS_TO_CYCLES(x) (((x) * ((F_CPU) / 1000000UL) + 999) / 1000UL) // "ceil"
 #endif
+
+#define DELAY_NS(x)         DELAY_CYCLES(_NS_TO_CYCLES(x))
+#define DELAY_NS_VAR(x) DELAY_CYCLES_VAR(_NS_TO_CYCLES(x))

Marlin/src/HAL/shared/Marduino.h

@@ -39,7 +39,7 @@
 #define DISABLED(V...) DO(DIS,&&,V)
 
 #undef _BV
-#define _BV(b) (1UL << (b))
+#define _BV(b) (1 << (b))
 #ifndef SBI
   #define SBI(A,B) (A |= _BV(B))
 #endif