Relocate and adjust DWIN E3V2

Marlin/Configuration_adv.h

@@ -1304,11 +1304,14 @@
   //#define LCD_SHOW_E_TOTAL
 #endif
 
-#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI)
-  //#define SHOW_REMAINING_TIME       // Display estimated time to completion
-  #if ENABLED(SHOW_REMAINING_TIME)
-    //#define USE_M73_REMAINING_TIME  // Use remaining time from M73 command instead of estimation
-    //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
+// LCD Print Progress options
+#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+  #if ANY(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
+    //#define SHOW_REMAINING_TIME         // Display estimated time to completion
+    #if ENABLED(SHOW_REMAINING_TIME)
+      //#define USE_M73_REMAINING_TIME    // Use remaining time from M73 command instead of estimation
+      //#define ROTATE_PROGRESS_DISPLAY   // Display (P)rogress, (E)lapsed, and (R)emaining time
+    #endif
   #endif
 
   #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI)

Marlin/src/MarlinCore.cpp

@@ -75,8 +75,8 @@
 #endif
 
 #if ENABLED(DWIN_CREALITY_LCD)
-  #include "lcd/dwin/e3v2/dwin.h"
-  #include "lcd/dwin/e3v2/rotary_encoder.h"
+  #include "lcd/e3v2/creality/dwin.h"
+  #include "lcd/e3v2/creality/rotary_encoder.h"
 #endif
 
 #if ENABLED(EXTENSIBLE_UI)
@@ -1310,11 +1310,7 @@ void setup() {
   // (because EEPROM code calls the UI).
 
   #if ENABLED(DWIN_CREALITY_LCD)
-    delay(800);   // Required delay (since boot?)
-    SERIAL_ECHOPGM("\nDWIN handshake ");
-    if (DWIN_Handshake()) SERIAL_ECHOLNPGM("ok."); else SERIAL_ECHOLNPGM("error.");
-    DWIN_Frame_SetDir(1); // Orientation 90°
-    DWIN_UpdateLCD();     // Show bootscreen (first image)
+    SETUP_RUN(DWIN_Startup());
   #else
     SETUP_RUN(ui.init());
     #if BOTH(HAS_WIRED_LCD, SHOW_BOOTSCREEN)

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -61,7 +61,7 @@
 #endif
 
 #if ENABLED(DWIN_CREALITY_LCD)
-  #include "../../../lcd/dwin/e3v2/dwin.h"
+  #include "../../../lcd/e3v2/creality/dwin.h"
 #endif
 
 #if HAS_MULTI_HOTEND

Marlin/src/gcode/calibrate/G28.cpp

@@ -47,7 +47,7 @@
 
 #include "../../lcd/marlinui.h"
 #if ENABLED(DWIN_CREALITY_LCD)
-  #include "../../lcd/dwin/e3v2/dwin.h"
+  #include "../../lcd/e3v2/creality/dwin.h"
 #endif
 
 #if ENABLED(EXTENSIBLE_UI)

Marlin/src/inc/Conditionals_LCD.h

@@ -482,10 +482,6 @@
 #endif
 
 // Aliases for LCD features
-#if EITHER(IS_ULTRA_LCD, EXTENSIBLE_UI)
-  #define HAS_DISPLAY 1
-#endif
-
 #if IS_ULTRA_LCD
   #define HAS_WIRED_LCD 1
   #if ENABLED(DOGLCD)
@@ -497,6 +493,10 @@
   #endif
 #endif
 
+#if EITHER(HAS_WIRED_LCD, EXTENSIBLE_UI)
+  #define HAS_DISPLAY 1
+#endif
+
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD, GLOBAL_STATUS_MESSAGE)
   #define HAS_STATUS_MESSAGE 1
 #endif

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -791,9 +791,10 @@ void MarlinUI::draw_status_screen() {
   //
 
   lcd.setCursor(0, 0);
-  _draw_axis_value(X_AXIS, ftostr4sign(LOGICAL_X_POSITION(current_position.x)), blink); lcd.write(' ');
-  _draw_axis_value(Y_AXIS, ftostr4sign(LOGICAL_Y_POSITION(current_position.y)), blink); lcd.write(' ');
-  _draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position.z)), blink);
+  const xyz_pos_t lpos = current_position.asLogical();
+  _draw_axis_value(X_AXIS, ftostr4sign(lpos.x), blink); lcd.write(' ');
+  _draw_axis_value(Y_AXIS, ftostr4sign(lpos.y), blink); lcd.write(' ');
+  _draw_axis_value(Z_AXIS, ftostr52sp(lpos.z), blink);
 
   #if HAS_LEVELING && !HAS_HEATED_BED
     lcd.write(planner.leveling_active || blink ? '_' : ' ');