MarlinFirmware · thinkyhead · Jan 4, 2020 · Dec 27, 2019 · Dec 27, 2019 · Jan 1, 2020
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -1957,6 +1957,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
@@ -110,7 +110,7 @@
   #define IS_RRD_SC
   #define IS_U8GLIB_SSD1306
 
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
   #define MINIPANEL
 

diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
@@ -259,7 +259,7 @@
 #elif ENABLED(MKS_LCD12864B)
   #define _LCD_CONTRAST_MIN  120
   #define _LCD_CONTRAST_INIT 205
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
   #define _LCD_CONTRAST_MIN  120
   #define _LCD_CONTRAST_INIT 195
 #elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)

diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
@@ -1866,7 +1866,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   + (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(IS_RRD_FG_SC)) \
   + (ENABLED(ULTRA_LCD) && DISABLED(IS_ULTRA_LCD)) \
   + (ENABLED(U8GLIB_SSD1306) && DISABLED(IS_U8GLIB_SSD1306)) \
-  + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \
+  + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864, ENDER2_STOCKDISPLAY)) \
   + (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(IS_RRW_KEYPAD)) \
   + (ENABLED(EXTENSIBLE_UI) && DISABLED(IS_EXTUI)) \
   + (ENABLED(ULTIPANEL) && DISABLED(IS_ULTIPANEL)) \
@@ -1895,6 +1895,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   + ENABLED(LCD_FOR_MELZI) \
   + ENABLED(ULTI_CONTROLLER) \
   + ENABLED(MKS_MINI_12864) \
+  + ENABLED(ENDER2_STOCKDISPLAY) \
   + ENABLED(FYSETC_MINI_12864_X_X) \
   + ENABLED(FYSETC_MINI_12864_1_2) \
   + ENABLED(FYSETC_MINI_12864_2_0) \

diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
@@ -118,7 +118,7 @@ static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
 static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
   U8G_ESC_ADR(0),             // instruction mode
   U8G_ESC_CS(1),              // enable chip
-  #if ENABLED(MKS_MINI_12864)
+  #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
     UC1701_START_LINE(0),     // set display start line to 0
     UC1701_ADC_REVERSE(0),    // ADC set to reverse
     UC1701_OUT_MODE(1),       // common output mode

diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.h b/Marlin/src/lcd/dogm/ultralcd_DOGM.h
@@ -147,7 +147,7 @@
 
   #define U8G_CLASS U8GLIB_MINI12864_2X_HAL                     // 4 stripes
 
-#elif ENABLED(MKS_MINI_12864)
+#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
   // The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
   // Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with

diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h
@@ -529,7 +529,7 @@
       #define SD_DETECT_PIN     49
       #define KILL_PIN          41
 
-    #elif ENABLED(MKS_MINI_12864)   // Added in Marlin 1.1.6
+    #elif ENABLED(MKS_MINI_12864)
 
       #define DOGLCD_A0         27
       #define DOGLCD_CS         25

diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
@@ -90,7 +90,7 @@
 // requires jumpers on the SKR V1.1 board as documented here:
 // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
 #ifndef SDCARD_CONNECTION
-  #if ENABLED(MKS_MINI_12864)
+  #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
     #define SDCARD_CONNECTION LCD
   #else
     #define SDCARD_CONNECTION ONBOARD

diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
@@ -271,11 +271,35 @@
     #else // !FYSETC_MINI_12864
 
       #if ENABLED(MKS_MINI_12864)
+
         #define DOGLCD_CS    P1_21
         #define DOGLCD_A0    P1_22
         #define DOGLCD_SCK   P0_15
         #define DOGLCD_MOSI  P0_18
+
+      #elif ENABLED(ENDER2_STOCKDISPLAY)
+
+        /**
+         * Creality Ender-2 display pinout
+         *                   _____
+         *               5V | · · | GND
+         *     (MOSI) P1_23 | · · | P1_22 (LCD_CS)
+         *   (LCD_A0) P1_21 | · · | P1_20 (BTN_EN2)
+         *      RESET P1.19 | · · | P1_18 (BTN_EN1)
+         *  (BTN_ENC) P0_28 | · · | P1_30 (SCK)
+         *                   -----
+         *                    EXP1
+         */
+
+        #define BTN_EN1      P1_18
+        #define BTN_EN2      P1_20
+        #define BTN_ENC      P0_28
+        #define DOGLCD_CS    P1_22
+        #define DOGLCD_A0    P1_21
+        #define DOGLCD_SCK   P1_30
+        #define DOGLCD_MOSI  P1_23
         #define FORCE_SOFT_SPI
+        #define LCD_BACKLIGHT_PIN -1
       #endif
 
       #if ENABLED(ULTIPANEL)

diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
@@ -35,9 +35,9 @@
 
 #include "pins_MELZI.h"
 
-// For the stock CR-10 use the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-//   option for the display in Configuration.h
-
+//
+// For the stock CR-10 enable CR10_STOCKDISPLAY in Configuration.h
+//
 #undef LCD_SDSS
 #undef LED_PIN
 #undef LCD_PINS_RS

diff --git a/Marlin/src/pins/stm32/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32/pins_BTT_SKR_E3_DIP.h
@@ -185,7 +185,7 @@
     #define LCD_PINS_ENABLE PB7
     #define LCD_PINS_D4    PB9
 
-  #elif ENABLED(MKS_MINI_12864)
+  #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
     /** Creality Ender-2 display pinout
      *                   _____

diff --git a/Marlin/src/pins/stm32/pins_BTT_SKR_MINI_E3.h b/Marlin/src/pins/stm32/pins_BTT_SKR_MINI_E3.h
@@ -138,7 +138,7 @@
     #define LCD_PINS_D7    PB5
     #define ADC_KEYPAD_PIN PA1    // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
 
-  #elif ENABLED(MKS_MINI_12864)
+  #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
 
     /** Creality Ender-2 display pinout
      *                   _____
@@ -163,7 +163,7 @@
 
   #else
 
-    #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
+    #error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BIGTREE_SKR_MINI_E3."
 
   #endif
 

diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN_PRO.h
@@ -251,7 +251,7 @@
     #define DOGLCD_SCK     PB13
     #define DOGLCD_MOSI    PB15
 
-  #else // !MKS_MINI_12864
+  #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY
 
     #define LCD_PINS_D4    PF14
     #if ENABLED(ULTIPANEL)
@@ -260,7 +260,7 @@
       #define LCD_PINS_D7  PF13
     #endif
 
-  #endif // !MKS_MINI_12864
+  #endif // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY
 #endif
 
 #ifndef ST7920_DELAY_1

diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1957,6 +1957,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1989,6 +1989,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1958,6 +1958,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1958,6 +1958,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1977,6 +1977,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -2037,6 +2037,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -2036,6 +2036,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1957,6 +1957,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1968,6 +1968,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1959,6 +1959,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1959,6 +1959,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -2074,6 +2074,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -1985,6 +1985,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
@@ -1968,6 +1968,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
@@ -1960,6 +1960,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
@@ -1969,6 +1969,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
@@ -1967,6 +1967,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //

diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
@@ -1958,6 +1958,11 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// Ender-2 OEM display, a variant of the MKS_MINI_12864
+//
+//#define ENDER2_STOCKDISPLAY
+
 //
 // ANET and Tronxy Graphical Controller
 //