Skip to content

[1.1.x] Shorter Z raise between multiple probes #11233

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
thinkyhead merged 2 commits into from
Jul 13, 2018
Merged

[1.1.x] Shorter Z raise between multiple probes #11233

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
54adf6f
Shorter Z up move between multiple probing attempts
nightgryphon Jul 9, 2018
8f11019
Add Z_CLEARANCE_MULTI_PROBE to example configs
thinkyhead Jul 12, 2018
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion Marlin/Conditionals_LCD.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -496,7 +496,7 @@
* Set flags for enabled probes
*/
#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY))
#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))

#if !HAS_BED_PROBE
// Clear probe pin settings when no probe is selected
Expand Down
20 changes: 13 additions & 7 deletions Marlin/Conditionals_post.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -1233,13 +1233,19 @@
#define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
#endif
#endif
#ifndef Z_CLEARANCE_BETWEEN_PROBES
#define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT
#endif
#if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT
#define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
#else
#define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT

#if PROBE_SELECTED
#ifndef Z_CLEARANCE_BETWEEN_PROBES
#define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT
#endif
#if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT
#define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
#else
#define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
#endif
#ifndef Z_CLEARANCE_MULTI_PROBE
#define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES
#endif
#endif

// Updated G92 behavior shifts the workspace
Expand Down
1 change: 1 addition & 0 deletions Marlin/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
4 changes: 2 additions & 2 deletions Marlin/Marlin_main.cpp
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -2294,7 +2294,7 @@ void clean_up_after_endstop_or_probe_move() {
#endif

// move up to make clearance for the probe
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST));

#else

Expand Down Expand Up @@ -2328,7 +2328,7 @@ void clean_up_after_endstop_or_probe_move() {

#if MULTIPLE_PROBING > 2
probes_total += current_position[Z_AXIS];
if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
}
#endif

Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -799,6 +799,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/AliExpress/CL-260/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
2 changes: 2 additions & 0 deletions Marlin/example_configurations/Anet/A6/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -850,10 +850,12 @@
#if 1 // 0 for less clearance
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done
#else
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 3 // Z position after probing is done
#endif

Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Anet/A8/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -786,6 +786,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 10 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 10 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/BQ/Hephestos/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -767,6 +767,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -777,6 +777,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/BQ/WITBOX/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -767,6 +767,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Cartesio/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -778,6 +778,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/CR-10/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -789,6 +789,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 10 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/CR-10S/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/CR-10mini/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -798,6 +798,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/CR-8/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -789,6 +789,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/Ender-2/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -783,6 +783,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/Ender-3/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -783,6 +783,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Creality/Ender-4/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -789,6 +789,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Felix/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -761,6 +761,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Felix/DUAL/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -761,6 +761,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -785,6 +785,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 3 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/GT2560/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -794,6 +794,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 6 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -795,6 +795,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -794,6 +794,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Infitary/i3-M508/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -783,6 +783,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/JGAurora/A5/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -791,6 +791,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Malyan/M150/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -803,6 +803,7 @@
*/
//#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
//#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Micromake/C1/basic/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -783,6 +783,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -783,6 +783,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -819,6 +819,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/RigidBot/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -777,6 +777,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/SCARA/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -792,6 +792,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Sanguinololu/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -810,6 +810,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/TinyBoy2/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -830,6 +830,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Tronxy/X1/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
5 changes: 3 additions & 2 deletions Marlin/example_configurations/Tronxy/X3A/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -777,9 +777,10 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping

Expand Down
1 change: 1 addition & 0 deletions Marlin/example_configurations/Tronxy/X5S/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -779,6 +779,7 @@
*/
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done

#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
Expand Down
Loading