LAN Auto-Negotiation fails (LED blinks orange) on Gigabit Switch #12
Comments
|
I've just tried it with the upgraded beta Debian7 NAND image, did an apt-get upgrade, but still the same behaviour. |
|
Strange. It should not do that. I don't have a gigabit switch handy to check myself. But you could force the ethernet speed to 100 perhaps. Or disable autonegotiation and see if that works. If you have wifi, please download ethtool using apt-get install ethtool Then use ethtool to disable autonegotiation. You could also force it to 10/100Mb perhaps. root@ci20-1277: Source Hope this helps. |
|
Hi ZubairLK, thanks for your answer. Force to 10 Mbits FD & HD: Force to 100 Mbits FD & HD: Autoneg still does not work, obviously. Cheers, |
|
Hi AcidicX, Would it be possible for you to try a different cable/gigabit router. I just tried a gigabit switch with cat 5,5e and 6 cables. They all worked. Autonegotiated and everything.. ZubairLK |
|
Right, cables are not the issue (tried that already) - but with a GbE switch, it worked, autonegotiated without problem, even with other 1000M-cards on the switch. Problem seems to be router + ci20. The funny part is - the switch is now connected to my router and autoneg still works. However, the router works flawlessly with a direct connection to a RBPi Model B, autoneg to 100M. I'll try a B+ soon enough, but I guess this will also work. Therefore I'm pretty sure it's not the router that has the issue... |
|
tracing such corner issues can be a really wild goose chase.. :) Glag you have a working setup now. I'll close the issue.. |
|
well... I wouldn't call it 'working setup'. I have to put a (otherwise useless) switch between the ci20 and the router... I would appreciate a follow up. It's also probably not the only GbE router that will have the issue with the ci20. |
|
I don't know if you still have this problem. I had a severe case of it a couple of years ago in an embedded development. 10Mb Ethernet is essentially a 'differential digital' connection, i.e Manchester encoded 1's and 0's. 100Mb and upwards are 'more analog' in their nature, and depend on a PLL to use the 4B/5B encoding. Static or similar disruption to the PHY interface can destroy the analog interface but leave the digital (i.e. 10Mb) interface working. Auto-negotiation takes place at 10Mb which is more-or-less always guaranteed to work. As far as the PHY is concerned, it believes it has the capability to run at 100Mb. So during auto-negotiation it will advertise it has that capability to do so. At the end of auto-negotiation it will switch to 100Mb and then become 'deaf'. Forcing 10Mb ensures the working interface i.e. the 10Mb one is the only one that is used.The only fix for this is replacing the Ethernet chip or the C120! We debugged this (i.e. we worked out what was happening) by using a debugger in the Ethernet driver to read back the PHY registers before, during and after auto-negotiation. As you seem to have 100Mb working but not 1Gb, it would seem likely a similar problem is in play. 1G uses all four pairs, 100Mb only uses two pairs. It seems probable you have either 'lost' the PHY receiver on one of the other two pairs, or a transformer winding or miid-point bias capacitor have been lost, resulting in wildly incorrect common-mode voltages. |
|
@quantumaardvark I don't think this is the case. If it would be a faulty connection, it would not work on any GbE switches, right? |
|
It would only be a faulty connection it it failed to work on ALL GbE switches. If the other switches you have work with auto-negotiation but are only 10/100Mb, then the negotiation will work with those. If on the other hand you have it working with other routers at 1Gb then it is more likely to be a marginal tolerance issue due to PHY damage. Your comments on the failure mode still indicate it is PHY damage on the CI20. The switch must have a better tolerance and/or be better balanced than the router. Seeing as all of these board-level products are susceptible to static damage though handling, I'd still favour the explanation of the PHY being 'walking wounded' in this respect. Your only solution is to fix the data rate advertised in the negotiation as suggested by ZubairLK. FWIW, I haven't had any problems at 1GbE... yet! |
|
OK... well, as I have no other ci20 board available and therefore can't check it by method of elimination, I'll mail to support and see what they make of it. |
|
One of our hardware guys had a look at the Ethernet layout and tweaked them a bit I think for the next round of manufacturing.. As quantum mentions, it looks like a marginal case. We tried a 1GbE router here on a board and auto-negotiation worked. |
|
@ZubairLK I emailed to support (bit of an odyssey, really... but fine now thanks to Ian), and I just received another ci20 to verify. The new ci20 displays the same behaviour. I've tried with Android and Debian Wheezy and Jessie, but they use the same kernel anyway. So it seems this is a firmware or board layout related issue and not a hardware failure (@quantumaardvark). I'll keep the issue updated when further debugging brings any news or when I can test one of the newer board layouts. |
|
Could you check using kernel 3.18 perhaps? The dm9000 driver isn't too different I think. But maybe. |
|
I guess I need to compile 3.18 myself or is there a pre-built binary somewhere to find? Haven't seen anything on the Google group. http://elinux.org/CI20_upstream does not mention anything either...? |
|
From #ci20.. bootargs change between 3.18 and 3.0.8.. Its written under rootfs parameter changes.. |
pcercuei
referenced
this issue
in OpenDingux/linux
May 16, 2018
syzbot caught an infinite recursion in nsh_gso_segment().
Problem here is that we need to make sure the NSH header is of
reasonable length.
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by syz-executor0/10189:
#0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
#1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
MIPS#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
MIPS#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
MIPS#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ MIPS#26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
__lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
rcu_read_lock include/linux/rcupdate.h:632 [inline]
skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
__skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
skb_gso_segment include/linux/netdevice.h:4025 [inline]
validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
qdisc_restart net/sched/sch_generic.c:399 [inline]
__qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
__dev_xmit_skb net/core/dev.c:3243 [inline]
__dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
packet_snd net/packet/af_packet.c:2951 [inline]
packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
__sys_sendto+0x3d7/0x670 net/socket.c:1789
__do_sys_sendto net/socket.c:1801 [inline]
__se_sys_sendto net/socket.c:1797 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jiri Benc <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Jiri Benc <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
nemunaire
pushed a commit
to nemunaire/CI20_linux
that referenced
this issue
Jun 6, 2018
[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 MIPS#1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 MIPS#2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 MIPS#3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef MIPS#4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] MIPS#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 MIPS#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 MIPS#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] MIPS#8 [ffff880078447da8] mount_bdev at ffffffff81202570 MIPS#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] MIPS#10 [ffff880078447e28] mount_fs at ffffffff81202d09 MIPS#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f MIPS#12 [ffff880078447ea8] do_mount at ffffffff81220fee MIPS#13 [ffff880078447f28] sys_mount at ffffffff812218d6 MIPS#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 MIPS#1 [ffff880078417900] schedule at ffffffff8168dc59 MIPS#2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 MIPS#3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 MIPS#4 [ffff8800784179d0] down_read at ffffffff8168cde0 MIPS#5 [ffff8800784179e8] get_super at ffffffff81201cc7 MIPS#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de MIPS#7 [ffff880078417a40] flush_disk at ffffffff8123a94b MIPS#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 MIPS#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] MIPS#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] MIPS#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 MIPS#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 MIPS#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b MIPS#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 MIPS#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf MIPS#16 [ffff880078417d00] do_last at ffffffff8120d53d MIPS#17 [ffff880078417db0] path_openat at ffffffff8120e6b2 MIPS#18 [ffff880078417e48] do_filp_open at ffffffff8121082b MIPS#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 MIPS#20 [ffff880078417f70] sys_open at ffffffff811fde4e MIPS#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Jul 24, 2018
Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 MIPS#16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 MIPS#17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 MIPS#18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 MIPS#19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- MIPS#20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame MIPS#21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd MIPS#22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 MIPS#23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 MIPS#24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 MIPS#25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 MIPS#26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa MIPS#27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca MIPS#28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 MIPS#29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb MIPS#30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <[email protected]> # v4.17+ Signed-off-by: Chuck Anderson <[email protected]> Signed-off-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
gabrielesvelto
pushed a commit
to gabrielesvelto/CI20_linux
that referenced
this issue
Nov 23, 2018
commit a007734 upstream. The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [MIPS#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 MIPS#12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118) [ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148) [ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: <[email protected]> Signed-off-by: Andreas Kemnade <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
gabrielesvelto
pushed a commit
to gabrielesvelto/CI20_linux
that referenced
this issue
Jan 1, 2019
[ Upstream commit c5a94f4 ] It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 MIPS#1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed MIPS#2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 MIPS#3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e MIPS#4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] MIPS#5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] MIPS#6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] MIPS#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] MIPS#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 MIPS#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] MIPS#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 MIPS#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa MIPS#12 [ffff881ff43eff18] sys_read at ffffffff811fda62 MIPS#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Feb 3, 2019
Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr handlers that call ipmi_free_recv_msg() directly. This will essentially kfree(msg), leading to use-after-free. This does not happen in the ipmi_devintf module, which will queue the message and run ipmi_free_recv_msg() later. BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0 Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018 Call Trace: dump_stack+0x92/0xeb print_address_description+0x73/0x290 kasan_report+0x258/0x380 deliver_response+0x12f/0x1b0 ? ipmi_free_recv_msg+0x50/0x50 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 ... Allocated by task 9885: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x116/0x290 ipmi_alloc_recv_msg+0x28/0x70 i_ipmi_request+0xb4a/0x1640 ipmi_request_settime+0x1b8/0x1e0 ... Freed by task 27: __kasan_slab_free+0x12e/0x180 kfree+0xe9/0x280 deliver_response+0x122/0x1b0 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 tasklet_action_common.isra.19+0xc4/0x250 __do_softirq+0x11f/0x51f Fixes: e86ee2d ("ipmi: Rework locking and shutdown for hot remove") Cc: [email protected] # 4.18 Signed-off-by: Fred Klassen <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Feb 24, 2019
commit 479d6b3 upstream. Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr handlers that call ipmi_free_recv_msg() directly. This will essentially kfree(msg), leading to use-after-free. This does not happen in the ipmi_devintf module, which will queue the message and run ipmi_free_recv_msg() later. BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0 Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018 Call Trace: dump_stack+0x92/0xeb print_address_description+0x73/0x290 kasan_report+0x258/0x380 deliver_response+0x12f/0x1b0 ? ipmi_free_recv_msg+0x50/0x50 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 ... Allocated by task 9885: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x116/0x290 ipmi_alloc_recv_msg+0x28/0x70 i_ipmi_request+0xb4a/0x1640 ipmi_request_settime+0x1b8/0x1e0 ... Freed by task 27: __kasan_slab_free+0x12e/0x180 kfree+0xe9/0x280 deliver_response+0x122/0x1b0 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 tasklet_action_common.isra.19+0xc4/0x250 __do_softirq+0x11f/0x51f Fixes: e86ee2d ("ipmi: Rework locking and shutdown for hot remove") Cc: [email protected] # 4.18 Signed-off-by: Fred Klassen <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
May 6, 2019
The spinlock in the raw3270_view structure is used by con3270, tty3270 and fs3270 in different ways. For con3270 the lock can be acquired in irq context, for tty3270 and fs3270 the highest context is bh. Lockdep sees the view->lock as a single class and if the 3270 driver is used for the console the following message is generated: WARNING: inconsistent lock state 5.1.0-rc3-05157-g5c168033979d #12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330 Introduce a lockdep subclass for the view lock to distinguish bh from irq locks. Signed-off-by: Martin Schwidefsky <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
May 6, 2019
By calling maps__insert() we assume to get 2 references on the map, which we relese within maps__remove call. However if there's already same map name, we currently don't bump the reference and can crash, like: Program received signal SIGABRT, Aborted. 0x00007ffff75e60f5 in raise () from /lib64/libc.so.6 (gdb) bt #0 0x00007ffff75e60f5 in raise () from /lib64/libc.so.6 #1 0x00007ffff75d0895 in abort () from /lib64/libc.so.6 #2 0x00007ffff75d0769 in __assert_fail_base.cold () from /lib64/libc.so.6 #3 0x00007ffff75de596 in __assert_fail () from /lib64/libc.so.6 #4 0x00000000004fc006 in refcount_sub_and_test (i=1, r=0x1224e88) at tools/include/linux/refcount.h:131 #5 refcount_dec_and_test (r=0x1224e88) at tools/include/linux/refcount.h:148 #6 map__put (map=0x1224df0) at util/map.c:299 #7 0x00000000004fdb95 in __maps__remove (map=0x1224df0, maps=0xb17d80) at util/map.c:953 #8 maps__remove (maps=0xb17d80, map=0x1224df0) at util/map.c:959 #9 0x00000000004f7d8a in map_groups__remove (map=<optimized out>, mg=<optimized out>) at util/map_groups.h:65 #10 machine__process_ksymbol_unregister (sample=<optimized out>, event=0x7ffff7279670, machine=<optimized out>) at util/machine.c:728 #11 machine__process_ksymbol (machine=<optimized out>, event=0x7ffff7279670, sample=<optimized out>) at util/machine.c:741 #12 0x00000000004fffbb in perf_session__deliver_event (session=0xb11390, event=0x7ffff7279670, tool=0x7fffffffc7b0, file_offset=13936) at util/session.c:1362 #13 0x00000000005039bb in do_flush (show_progress=false, oe=0xb17e80) at util/ordered-events.c:243 #14 __ordered_events__flush (oe=0xb17e80, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:322 #15 0x00000000005005e4 in perf_session__process_user_event (session=session@entry=0xb11390, event=event@entry=0x7ffff72a4af8, ... Add the map to the list and getting the reference event if we find the map with same name. Signed-off-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Eric Saint-Etienne <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Fixes: 1e62856 ("perf symbols: Fix slowness due to -ffunction-section") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 31, 2020
When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 MIPS#16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d MIPS#17 [ffffc9002219fc90] schedule at ffffffff81a3e219 MIPS#18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 MIPS#19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 MIPS#20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc MIPS#21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c MIPS#22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 MIPS#23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: --- a/tools/trace.py +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 31, 2020
Before ------ | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | | [ECR ]: 0x00090000 => | [EFA ]: 0x00000000 | [ERET ]: 0x2004aa6c | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | [STAT32]: 0x80080a82 [IE U ] | BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 After ----- | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c | STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18 | BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18 Signed-off-by: Vineet Gupta <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 17, 2020
…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 MIPS#16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 MIPS#17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 MIPS#18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Sumanth Korikkar <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 17, 2020
We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg doesn't have any reclaimable memory. It can be easily reproduced as below: watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204] CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12 Call Trace: shrink_lruvec+0x49f/0x640 shrink_node+0x2a6/0x6f0 do_try_to_free_pages+0xe9/0x3e0 try_to_free_mem_cgroup_pages+0xef/0x1f0 try_charge+0x2c1/0x750 mem_cgroup_charge+0xd7/0x240 __add_to_page_cache_locked+0x2fd/0x370 add_to_page_cache_lru+0x4a/0xc0 pagecache_get_page+0x10b/0x2f0 filemap_fault+0x661/0xad0 ext4_filemap_fault+0x2c/0x40 __do_fault+0x4d/0xf9 handle_mm_fault+0x1080/0x1790 It only happens on our 1-vcpu instances, because there's no chance for oom reaper to run to reclaim the to-be-killed process. Add a cond_resched() at the upper shrink_node_memcgs() to solve this issue, this will mean that we will get a scheduling point for each memcg in the reclaimed hierarchy without any dependency on the reclaimable memory in that memcg thus making it more predictable. Suggested-by: Michal Hocko <[email protected]> Signed-off-by: Xunlei Pang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Chris Down <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Johannes Weiner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
With CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, a system would try to probe, unregister and probe again a driver. When ghes_edac is attempted to be loaded on a system which is not on the safe platforms list, ghes_edac_register() would return early. The unregister counterpart ghes_edac_unregister() would still attempt to unregister and exit early at the refcount test, leading to the refcount underflow below. In order to not do *anything* on the unregister path too, reuse the force_load parameter and check it on that path too, before fumbling with the refcount. ghes_edac: ghes_edac_register: entry ghes_edac: ghes_edac_register: return -ENODEV ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 10 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xb9/0x100 Modules linked in: CPU: 10 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #12 Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018 RIP: 0010:refcount_warn_saturate+0xb9/0x100 Code: 82 e8 fb 8f 4d 00 90 0f 0b 90 90 c3 80 3d 55 4c f5 00 00 75 88 c6 05 4c 4c f5 00 01 90 48 c7 c7 d0 8a 10 82 e8 d8 8f 4d 00 90 <0f> 0b 90 90 c3 80 3d 30 4c f5 00 00 0f 85 61 ff ff ff c6 05 23 4c RSP: 0018:ffffc90000037d58 EFLAGS: 00010292 RAX: 0000000000000026 RBX: ffff88840b8da000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff8216b24f RDI: 00000000ffffffff RBP: ffff88840c662e00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88840ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000800002211000 CR4: 00000000003506e0 Call Trace: ghes_edac_unregister ghes_remove platform_drv_remove really_probe driver_probe_device device_driver_attach __driver_attach ? device_driver_attach ? device_driver_attach bus_for_each_dev bus_add_driver driver_register ? bert_init ghes_init do_one_initcall ? rcu_read_lock_sched_held kernel_init_freeable ? rest_init kernel_init ret_from_fork ... ghes_edac: ghes_edac_unregister: FALSE, refcount: -1073741824 Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
The aliases were never released causing the following leaks:
Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
#0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
#1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
#2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
#3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
#4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
#5 0x56332c76a09b in run_test tests/builtin-test.c:410
#6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
#7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
#8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
#9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 956a783 ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <[email protected]>
Reviewed-by: John Garry <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
MIPS#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
MIPS#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
MIPS#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
The test_generic_metric() missed to release entries in the pctx. Asan
reported following leak (and more):
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
#2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
#3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
#4 0x55f7e7341667 in expr__add_ref util/expr.c:120
#5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
#6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
#7 0x55f7e712390b in compute_single tests/parse-metric.c:128
#8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
#9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
#10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
#11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
#12 0x55f7e70be09b in run_test tests/builtin-test.c:410
#13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
MIPS#16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
MIPS#17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
MIPS#18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
MIPS#19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
MIPS#20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 6d432c4 ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail. Also it can fail in the middle like in
resolve_metric() even for single metric.
In those cases, the intermediate list and ids will be leaked like:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
#2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
#3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
#4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
#5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
#6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
#7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
#8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
#9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
#10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
#11 0x55f7e70be09b in run_test tests/builtin-test.c:410
#12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
#13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
#14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
#15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
MIPS#16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
MIPS#17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
MIPS#18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
MIPS#19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 24, 2020
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Nov 28, 2020
This fix is for a failure that occurred in the DWARF unwind perf test.
Stack unwinders may probe memory when looking for frames.
Memory sanitizer will poison and track uninitialized memory on the
stack, and on the heap if the value is copied to the heap.
This can lead to false memory sanitizer failures for the use of an
uninitialized value.
Avoid this problem by removing the poison on the copied stack.
The full msan failure with track origins looks like:
==2168==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22
#1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13
#2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
MIPS#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#24 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10
#1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13
#2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18
#3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
MIPS#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
MIPS#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
MIPS#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
MIPS#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
MIPS#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
MIPS#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
MIPS#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
MIPS#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#25 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2
#2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9
#3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6
#4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
MIPS#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
MIPS#17 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events'
#0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445
SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: [email protected]
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandeep Dasgupta <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Dec 7, 2020
crq->msgs could be NULL if the previous reset did not complete after freeing crq->msgs. Check for NULL before dereferencing them. Snippet of call trace: ... ibmvnic 30000003 env3 (unregistering): Releasing sub-CRQ ibmvnic 30000003 env3 (unregistering): Releasing CRQ BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0000000000c1a30 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(E-) rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag tun raw_diag inet_diag unix_diag bridge af_packet_diag netlink_diag stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ibmvnic] CPU: 20 PID: 8426 Comm: kworker/20:0 Tainted: G E 5.10.0-rc1+ #12 Workqueue: events __ibmvnic_reset [ibmvnic] NIP: c0000000000c1a30 LR: c008000001b00c18 CTR: 0000000000000400 REGS: c00000000d05b7a0 TRAP: 0380 Tainted: G E (5.10.0-rc1+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002480 XER: 20040000 CFAR: c0000000000c19ec IRQMASK: 0 GPR00: 0000000000000400 c00000000d05ba30 c008000001b17c00 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000001e2 GPR08: 000000000001f400 ffffffffffffd950 0000000000000000 c008000001b0b280 GPR12: c0000000000c19c8 c00000001ec72e00 c00000000019a778 c00000002647b440 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000006 0000000000000001 0000000000000003 0000000000000002 GPR24: 0000000000001000 c008000001b0d570 0000000000000005 c00000007ab5d550 GPR28: c00000007ab5c000 c000000032fcf848 c00000007ab5cc00 c000000032fcf800 NIP [c0000000000c1a30] memset+0x68/0x104 LR [c008000001b00c18] ibmvnic_reset_crq+0x70/0x110 [ibmvnic] Call Trace: [c00000000d05ba30] [0000000000000800] 0x800 (unreliable) [c00000000d05bab0] [c008000001b0a930] do_reset.isra.40+0x224/0x634 [ibmvnic] [c00000000d05bb80] [c008000001b08574] __ibmvnic_reset+0x17c/0x3c0 [ibmvnic] [c00000000d05bc50] [c00000000018d9ac] process_one_work+0x2cc/0x800 [c00000000d05bd20] [c00000000018df58] worker_thread+0x78/0x520 [c00000000d05bdb0] [c00000000019a934] kthread+0x1c4/0x1d0 [c00000000d05be20] [c00000000000d5d0] ret_from_kernel_thread+0x5c/0x6c Fixes: 032c5e8 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Dec 7, 2020
Prior to sanitizing the GGTT, the only operations allowed in intel_display_init_nogem() are those to reserve the preallocated (and active) regions in the GGTT leftover from the BIOS. Trying to allocate a GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset) may then conflict with other preallocated regions that have not yet been protected. Move the initial modesetting from the end of init_nogem to the beginning of init so that any vma pinning (either framebuffers or DSB, for example), is after the GGTT is ready to handle it. This will prevent the DSB object from being destroyed too early: [ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345 [ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12 [ 53.449409] Call Trace: [ 53.449418] dump_stack+0x9a/0xcc [ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449565] print_address_description.constprop.0+0x3e/0x60 [ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449857] kasan_report.cold+0x1f/0x37 [ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] [ 53.450281] ? static_obj+0x69/0x80 [ 53.450289] ? lockdep_init_map_waits+0xa9/0x310 [ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915] [ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915] [ 53.450720] i915_gem_init+0x75/0x2d0 [i915] [ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915] [ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915] [ 53.451006] ? check_chain_key+0x1e7/0x2e0 [ 53.451025] ? __pm_runtime_resume+0x58/0xb0 [ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.451285] ? i915_pci_remove+0x40/0x40 [i915] [ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230 [ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50 [ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130 [ 53.451315] ? preempt_count_sub+0xf/0xb0 [ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50 [ 53.451335] pci_device_probe+0xf9/0x190 [ 53.451350] really_probe+0x17f/0x5b0 [ 53.451365] driver_probe_device+0x13a/0x1c0 [ 53.451376] device_driver_attach+0x82/0x90 [ 53.451386] ? device_driver_attach+0x90/0x90 [ 53.451391] __driver_attach+0xab/0x190 [ 53.451401] ? device_driver_attach+0x90/0x90 [ 53.451407] bus_for_each_dev+0xe4/0x140 [ 53.451414] ? subsys_dev_iter_exit+0x10/0x10 [ 53.451423] ? __list_add_valid+0x2b/0xa0 [ 53.451440] bus_add_driver+0x227/0x2e0 [ 53.451454] driver_register+0xd3/0x150 [ 53.451585] i915_init+0x92/0xac [i915] [ 53.451592] ? 0xffffffffa0a20000 [ 53.451598] do_one_initcall+0xb6/0x3b0 [ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0 [ 53.451634] ? kasan_unpoison_shadow+0x33/0x40 [ 53.451649] do_init_module+0xf8/0x350 [ 53.451662] load_module+0x43de/0x47f0 [ 53.451716] ? module_frob_arch_sections+0x20/0x20 [ 53.451731] ? rw_verify_area+0x5f/0x130 [ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0 [ 53.451785] __do_sys_finit_module+0x10d/0x1a0 [ 53.451792] ? __ia32_sys_init_module+0x40/0x40 [ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0 [ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 53.451835] ? mark_held_locks+0x24/0x90 [ 53.451856] do_syscall_64+0x33/0x80 [ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.451868] RIP: 0033:0x7fde09b4470d [ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48 [ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d [ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f [ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded [ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150 [ 53.451957] Allocated by task 345: [ 53.451995] kasan_save_stack+0x1b/0x40 [ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.452006] kmem_cache_alloc+0x1cd/0x8d0 [ 53.452146] i915_vma_instance+0x126/0xb70 [i915] [ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915] [ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915] [ 53.452588] intel_atomic_commit+0x183/0x690 [i915] [ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915] [ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915] [ 53.452995] i915_driver_probe+0x8af/0x1210 [i915] [ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.453125] pci_device_probe+0xf9/0x190 [ 53.453131] really_probe+0x17f/0x5b0 [ 53.453136] driver_probe_device+0x13a/0x1c0 [ 53.453142] device_driver_attach+0x82/0x90 [ 53.453148] __driver_attach+0xab/0x190 [ 53.453153] bus_for_each_dev+0xe4/0x140 [ 53.453158] bus_add_driver+0x227/0x2e0 [ 53.453164] driver_register+0xd3/0x150 [ 53.453286] i915_init+0x92/0xac [i915] [ 53.453292] do_one_initcall+0xb6/0x3b0 [ 53.453297] do_init_module+0xf8/0x350 [ 53.453302] load_module+0x43de/0x47f0 [ 53.453307] __do_sys_finit_module+0x10d/0x1a0 [ 53.453312] do_syscall_64+0x33/0x80 [ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.453345] Freed by task 82: [ 53.453379] kasan_save_stack+0x1b/0x40 [ 53.453384] kasan_set_track+0x1c/0x30 [ 53.453389] kasan_set_free_info+0x1b/0x30 [ 53.453394] __kasan_slab_free+0x112/0x160 [ 53.453399] kmem_cache_free+0xb2/0x3f0 [ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915] [ 53.453542] process_one_work+0x519/0x9f0 [ 53.453547] worker_thread+0x75/0x5c0 [ 53.453552] kthread+0x1da/0x230 [ 53.453557] ret_from_fork+0x22/0x30 [ 53.453584] The buggy address belongs to the object at ffff88811b1e8040 which belongs to the cache i915_vma of size 968 [ 53.453692] The buggy address is located 48 bytes inside of 968-byte region [ffff88811b1e8040, ffff88811b1e8408) [ 53.453792] The buggy address belongs to the page: [ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8 [ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0 [ 53.453853] flags: 0x8000000000010200(slab|head) [ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340 [ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000 [ 53.453870] page dumped because: kasan: bad access detected [ 53.453895] Memory state around the buggy address: [ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb [ 53.454146] ^ [ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454347] ================================================================== [ 53.454414] Disabling lock debugging due to kernel taint [ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12 [ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915] [ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8 [ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286 [ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f [ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160 [ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000 [ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0 [ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160 [ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000 [ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0 [ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.454700] Call Trace: [ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] Reported-by: Matthew Auld <[email protected]> Fixes: afeda4f ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Chris Wilson <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Lucas De Marchi <[email protected]> Tested-by: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b3bf99d) Signed-off-by: Rodrigo Vivi <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 8, 2021
Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 MIPS#16 do_syscall_64 at ffffffffa4a052eb MIPS#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes MIPS#16 normal_work_helper at ffffffffc03b706c MIPS#17 process_one_work at ffffffffa4aba4e4 MIPS#18 worker_thread at ffffffffa4aba6fd MIPS#19 kthread at ffffffffa4ac0a3d MIPS#20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the pci device is disabled. The caller, lanai_init_one(), then tries to run atm_dev_deregister(). This will subsequently call lanai_dev_close() and use the already released MMIO area. To fix this issue, set the lanai->base to NULL if open fail, and test the flag in lanai_dev_close(). [ 8.324153] lanai: lanai_start() failed, err=19 [ 8.324819] lanai(itf 0): shutting down interface [ 8.325211] BUG: unable to handle page fault for address: ffffc90000180024 [ 8.325781] #PF: supervisor write access in kernel mode [ 8.326215] #PF: error_code(0x0002) - not-present page [ 8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0 [ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI [ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12 [ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.333077] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.334932] Call Trace: [ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm] [ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai] [ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai] [ 8.335831] local_pci_probe+0x6f/0xb0 [ 8.336039] pci_device_probe+0x171/0x240 [ 8.336255] ? pci_device_remove+0xe0/0xe0 [ 8.336475] ? kernfs_create_link+0xb6/0x110 [ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 8.336983] really_probe+0x161/0x420 [ 8.337181] driver_probe_device+0x6d/0xd0 [ 8.337401] device_driver_attach+0x82/0x90 [ 8.337626] ? device_driver_attach+0x90/0x90 [ 8.337859] __driver_attach+0x60/0x100 [ 8.338065] ? device_driver_attach+0x90/0x90 [ 8.338298] bus_for_each_dev+0xe1/0x140 [ 8.338511] ? subsys_dev_iter_exit+0x10/0x10 [ 8.338745] ? klist_node_init+0x61/0x80 [ 8.338956] bus_add_driver+0x254/0x2a0 [ 8.339164] driver_register+0xd3/0x150 [ 8.339370] ? 0xffffffffc0028000 [ 8.339550] do_one_initcall+0x84/0x250 [ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0 [ 8.340329] ? unpoison_range+0xf/0x30 [ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.340806] ? unpoison_range+0xf/0x30 [ 8.341014] ? unpoison_range+0xf/0x30 [ 8.341217] do_init_module+0xf8/0x350 [ 8.341419] load_module+0x3fe6/0x4340 [ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0 [ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 8.342101] ? module_frob_arch_sections+0x20/0x20 [ 8.342358] ? __do_sys_finit_module+0x108/0x170 [ 8.342604] __do_sys_finit_module+0x108/0x170 [ 8.342841] ? __ia32_sys_init_module+0x40/0x40 [ 8.343083] ? file_open_root+0x200/0x200 [ 8.343298] ? do_sys_open+0x85/0xe0 [ 8.343491] ? filp_open+0x50/0x50 [ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130 [ 8.343935] do_syscall_64+0x33/0x40 [ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.344401] RIP: 0033:0x7f08eb887cf7 [ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7 [ 8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003 [ 8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0 [ 8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001 [ 8.347836] Modules linked in: lanai(+) atm [ 8.348065] CR2: ffffc90000180024 [ 8.348244] ---[ end trace 7fdc1c668f2003e5 ]--- [ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai] [ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80 [ 8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246 [ 8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a [ 8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000 [ 8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa [ 8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4 [ 8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88 [ 8.351918] FS: 00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0 [ 8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
# perf test -v 4
4: Read samples using the mmap interface :
--- start ---
test child forked, pid 139782
mmap size 528384B
=================================================================
==139782==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55
#6 0x564ba1e278fb in run_test tests/builtin-test.c:428
#7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458
#8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679
#9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825
#10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Read samples using the mmap interface: FAILED!
failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 24
24: Number of exit events of a simple workload :
--- start ---
test child forked, pid 145915
mmap size 528384B
=================================================================
==145915==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63
#3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74
#4 0x561cf4d798fb in run_test tests/builtin-test.c:428
#5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458
#6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679
#7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825
#8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Number of exit events of a simple workload: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 25
25: Software clock events period values :
--- start ---
test child forked, pid 149154
mmap size 528384B
mmap size 528384B
=================================================================
==149154==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63
#3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65
#4 0x56260d26d8fb in run_test tests/builtin-test.c:428
#5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458
#6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679
#7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825
#8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Software clock events period values : FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
Note that this test still has memory leaks in DSOs so it still fails
even after this change. I'll take a look at that too.
# perf test -v 26
26: Object code reading :
--- start ---
test child forked, pid 154184
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
Parsing event 'cycles'
mmap size 528384B
...
=================================================================
==154184==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
#2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
#3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
#4 0x55ad9b845b7e in map__new util/map.c:176
#5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
#6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
#7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
#8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
#9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
#10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
#11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
#12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
#13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
#14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
#15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
MIPS#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
MIPS#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
MIPS#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
MIPS#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
MIPS#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Object code reading: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
$ perf test -v 28
28: Use a dummy software event to keep tracking:
--- start ---
test child forked, pid 156810
mmap size 528384B
=================================================================
==156810==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
#6 0x55cc625e38fb in run_test tests/builtin-test.c:428
#7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
#8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
#9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
#10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Use a dummy software event to keep tracking: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.
$ perf test -v 35
35: Track with sched_switch :
--- start ---
test child forked, pid 159287
Using CPUID GenuineIntel-6-8E-C
mmap size 528384B
1295 events recorded
=================================================================
==159287==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
#6 0x5652f56e18fb in run_test tests/builtin-test.c:428
#7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
#8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
#9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
#10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Track with sched_switch: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
It missed to call perf_thread_map__put() after using the map.
$ perf test -v 43
43: Synthesize thread map :
--- start ---
test child forked, pid 162640
=================================================================
==162640==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
#3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
#4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
#5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
#6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
#7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
#8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Synthesize thread map: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
It should be released after printing the map.
$ perf test -v 52
52: Print cpu map :
--- start ---
test child forked, pid 172233
=================================================================
==172233==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 156 byte(s) in 1 object(s) allocated from:
#0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
#4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
#5 0x55e63afff8fb in run_test tests/builtin-test.c:428
#6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
#7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
#8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
#9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
test child finished with 1
---- end ----
Print cpu map: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
It should release the maps at the end.
$ perf test -v 71
71: Convert perf time to TSC :
--- start ---
test child forked, pid 178744
mmap size 528384B
1st event perf time 59207256505278 tsc 13187166645142
rdtsc time 59207256542151 tsc 13187166723020
2nd event perf time 59207256543749 tsc 13187166726393
=================================================================
==178744==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
#6 0x55b6209828fb in run_test tests/builtin-test.c:428
#7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
#8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
#9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
#10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Convert perf time to TSC: FAILED!
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Mar 16, 2021
I got a segfault when using -r option with event groups. The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.
While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug. You can see it with
the address sanitizer like below:
$ perf stat -r 100 -e '{cycles,instructions}' true
=================================================================
==693052==ERROR: AddressSanitizer: heap-use-after-free on
address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
WRITE of size 8 at 0x6080000003d0 thread T0
#0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
#1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
#2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
#3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
#4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
#5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
#6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
#7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
#8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
#9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)
Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run. Fix it by resetting the hash.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Apr 3, 2021
Crypto engine (CAAM) on LS1046A platform is configured HW-coherent, mark accordingly the DT node. As reported by Greg and Sascha, and explained by Robin, lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, e.g. on v5.11: > kernel BUG at drivers/crypto/caam/jr.c:247! > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP > Modules linked in: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.11.0-20210225-3-00039-g434215968816-dirty #12 > Hardware name: TQ TQMLS1046A SoM on Arkona AT1130 (C300) board (DT) > pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) > pc : caam_jr_dequeue+0x98/0x57c > lr : caam_jr_dequeue+0x98/0x57c > sp : ffff800010003d50 > x29: ffff800010003d50 x28: ffff8000118d4000 > x27: ffff8000118d4328 x26: 00000000000001f0 > x25: ffff0008022be480 x24: ffff0008022c6410 > x23: 00000000000001f1 x22: ffff8000118d4329 > x21: 0000000000004d80 x20: 00000000000001f1 > x19: 0000000000000001 x18: 0000000000000020 > x17: 0000000000000000 x16: 0000000000000015 > x15: ffff800011690230 x14: 2e2e2e2e2e2e2e2e > x13: 2e2e2e2e2e2e2020 x12: 3030303030303030 > x11: ffff800011700a38 x10: 00000000fffff000 > x9 : ffff8000100ada30 x8 : ffff8000116a8a38 > x7 : 0000000000000001 x6 : 0000000000000000 > x5 : 0000000000000000 x4 : 0000000000000000 > x3 : 00000000ffffffff x2 : 0000000000000000 > x1 : 0000000000000000 x0 : 0000000000001800 > Call trace: > caam_jr_dequeue+0x98/0x57c > tasklet_action_common.constprop.0+0x164/0x18c > tasklet_action+0x44/0x54 > __do_softirq+0x160/0x454 > __irq_exit_rcu+0x164/0x16c > irq_exit+0x1c/0x30 > __handle_domain_irq+0xc0/0x13c > gic_handle_irq+0x5c/0xf0 > el1_irq+0xb4/0x180 > arch_cpu_idle+0x18/0x30 > default_idle_call+0x3c/0x1c0 > do_idle+0x23c/0x274 > cpu_startup_entry+0x34/0x70 > rest_init+0xdc/0xec > arch_call_rest_init+0x1c/0x28 > start_kernel+0x4ac/0x4e4 > Code: 91392021 912c2000 d377d8c6 97f24d96 (d4210000) Cc: <[email protected]> # v4.10+ Fixes: 8126d88 ("arm64: dts: add QorIQ LS1046A SoC support") Link: https://lore.kernel.org/linux-crypto/[email protected] Reported-by: Greg Ungerer <[email protected]> Reported-by: Sascha Hauer <[email protected]> Tested-by: Sascha Hauer <[email protected]> Signed-off-by: Horia Geantă <[email protected]> Acked-by: Greg Ungerer <[email protected]> Acked-by: Li Yang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Apr 3, 2021
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
MIPS#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
MIPS#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
MIPS#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
MIPS#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
MIPS#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
MIPS#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
MIPS#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
MIPS#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Apr 12, 2021
The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [[email protected]: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
pcercuei
referenced
this issue
in OpenDingux/linux
Aug 23, 2021
Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes on one of his systems: kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xc008000004073278 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ... CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12 Workqueue: events control_work_handler [virtio_console] NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0 REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+) MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf ... NIP fill_queue+0xf0/0x210 [virtio_console] LR fill_queue+0xf0/0x210 [virtio_console] Call Trace: fill_queue+0xb4/0x210 [virtio_console] (unreliable) add_port+0x1a8/0x470 [virtio_console] control_work_handler+0xbc/0x1e8 [virtio_console] process_one_work+0x290/0x590 worker_thread+0x88/0x620 kthread+0x194/0x1a0 ret_from_kernel_thread+0x5c/0x64 Jordan, Fabiano & Murilo were able to reproduce and identify that the problem is caused by the call to module_enable_ro() in do_init_module(), which happens after the module's init function has already been called. Our current implementation of change_page_attr() is not safe against concurrent accesses, because it invalidates the PTE before flushing the TLB and then installing the new PTE. That leaves a window in time where there is no valid PTE for the page, if another CPU tries to access the page at that time we see something like the fault above. We can't simply switch to set_pte_at()/flush TLB, because our hash MMU code doesn't handle a set_pte_at() of a valid PTE. See [1]. But we do have pte_update(), which replaces the old PTE with the new, meaning there's no window where the PTE is invalid. And the hash MMU version hash__pte_update() deals with synchronising the hash page table correctly. [1]: https://lore.kernel.org/linuxppc-dev/[email protected]/ Fixes: 1f9ad21 ("powerpc/mm: Implement set_memory() routines") Reported-by: Laurent Vivier <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Reviewed-by: Murilo Opsfelder Araújo <[email protected]> Tested-by: Laurent Vivier <[email protected]> Signed-off-by: Fabiano Rosas <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
pcercuei
referenced
this issue
in OpenDingux/linux
Sep 21, 2021
It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 MIPS#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 MIPS#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 MIPS#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi there,
when connected to a gigabit router (in this case a Netgear WNDR 3700 v2), the auto-negotiation fails and the LAN port only blinks orange (indicating wrong speed). Auto-negotiation works fine with the same router and a RBPi (also 10/100 Mbit card).
I can get a connection when I use a crossover cable and connect it to my Linux PC with a static 10 or 100 Mbit/s speed (set via mii-tool on the PC). Auto-negotiation however also fails with the crossover cable (PC has a gigabit ethernet card).
I have not tried it on a 100 Mbit/s switch/router yet.
// edit:
It did not work with the stock image, and still does not work after running apt-get upgrade.
The text was updated successfully, but these errors were encountered: