Repository navigation
feat(dashboard): Issue #71 — Step 9 Dashboard に state.json KPI/フェーズ統合 - #82
Merged
Merged
Conversation
…ープ履歴を統合
- Start-ClaudeOS.ps1:
- Get-StateJsonDashboard ヘルパー関数を追加 (state.json → PSObject 変換)
- Write-BootDashboard に -Root パラメータを追加
- state.json 存在時: Goal & KPI / Execution Status / Token Budget /
Current Work / Last Loop を色分け表示
- state.json 不在時: 従来の Boot Summary のみ (後方互換を維持)
- tests/StartScripts.Tests.ps1:
- Step 9 Dashboard が state.json なしでも正常終了するテストを追加
- state.json の Goal title がダッシュボードに表示されるテストを追加
Closes #71
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
📝 WalkthroughWalkthrough
Changes
Sequence Diagram(s)sequenceDiagram
participant StartScript as Start-ClaudeOS.ps1
participant FS as FileSystem
participant Console as Console/Host
StartScript->>FS: Read `<Root>/state.json` via Get-StateJsonDashboard
alt file exists & valid JSON
FS-->>StartScript: Return parsed state object
StartScript->>Console: Print Boot Summary counts
StartScript->>Console: Conditionally render Goal & KPI
StartScript->>Console: Conditionally render Execution Status
StartScript->>Console: Conditionally render Token Budget, Current Work, Last Loop
else missing or invalid
FS-->>StartScript: Return $null or throw parse error
StartScript->>Console: Print Boot Summary counts only
StartScript->>Console: If parse error -> Write-Warning, still return summary
end
Estimated code review effort🎯 3 (Moderate) | ⏱️ ~20 minutes Poem
🚥 Pre-merge checks | ✅ 5✅ Passed checks (5 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing Touches🧪 Generate unit tests (beta)
Comment |
There was a problem hiding this comment.
Pull request overview
Start-ClaudeOS.ps1 の Step 9 Dashboard に state.json を統合し、Goal/KPI・実行状況・トークン予算などのセッション状態を TUI で表示できるようにする PR です。state.json が無い場合は従来の Boot Summary 表示を維持します。
Changes:
Start-ClaudeOS.ps1にstate.json読み込みヘルパーを追加し、Dashboard 表示を拡張Write-BootDashboardに-Rootパラメータを追加してstate.jsonを参照- Dashboard の
state.json有無に関する Pester テストを追加
Reviewed changes
Copilot reviewed 2 out of 2 changed files in this pull request and generated 6 comments.
| File | Description |
|---|---|
| scripts/main/Start-ClaudeOS.ps1 | Step 9 Dashboard で state.json を読み込み、Goal/KPI・Execution/Token 等を追加表示 |
| tests/StartScripts.Tests.ps1 | state.json なし/ありの Dashboard 出力を検証するテストを追加 |
Comment on lines
+263
to
+266
| $successTarget = if ($null -ne $kpi.success_rate_target) { '{0:P0}' -f $kpi.success_rate_target } else { 'n/a' } | ||
| $ciTarget = if ($null -ne $kpi.ci_pass_rate) { '{0:P0}' -f $kpi.ci_pass_rate } else { 'n/a' } | ||
| $openP1 = if ($null -ne $kpi.open_p1_issues) { $kpi.open_p1_issues } else { 'n/a' } | ||
| Write-Host (" KPI : success≥{0} CI≥{1} P1-issues={2}" -f $successTarget, $ciTarget, $openP1) -ForegroundColor Cyan |
Comment on lines
+290
to
+307
| if ($state.current_work) { | ||
| $work = $state.current_work | ||
| Write-Host '' | ||
| Write-Host ' ── Current Work ────────────────────────────' -ForegroundColor Magenta | ||
| if ($work.issue) { | ||
| Write-Host (" Issue #{0}: {1}" -f $work.issue, $work.title) -ForegroundColor White | ||
| } | ||
| if ($work.pr) { | ||
| Write-Host (" PR #{0} [{1}]" -f $work.pr, $work.branch) -ForegroundColor Cyan | ||
| } | ||
| } | ||
|
|
||
| if ($state.loop_history -and @($state.loop_history).Count -gt 0) { | ||
| $lastLoop = @($state.loop_history)[-1] | ||
| Write-Host '' | ||
| Write-Host ' ── Last Loop ───────────────────────────────' -ForegroundColor Magenta | ||
| Write-Host (" Loop {0} [{1}]: {2}" -f $lastLoop.loop, $lastLoop.phase, $lastLoop.outcome) -ForegroundColor DarkGray | ||
| } |
| $total = if ($null -ne $tok.total_budget) { $tok.total_budget } else { '?' } | ||
| Write-Host '' | ||
| Write-Host ' ── Token Budget ────────────────────────────' -ForegroundColor Magenta | ||
| Write-Host (" Used/Total: {0}/{1} Remaining: {2}%" -f $used, $total, $remaining) -ForegroundColor White |
Comment on lines
+224
to
+235
| function Get-StateJsonDashboard { | ||
| param([string]$Root) | ||
| $statePath = Join-Path $Root 'state.json' | ||
| if (-not (Test-Path $statePath)) { | ||
| return $null | ||
| } | ||
| try { | ||
| return Get-Content $statePath -Raw -Encoding UTF8 | ConvertFrom-Json | ||
| } | ||
| catch { | ||
| return $null | ||
| } |
Comment on lines
+229
to
+246
| $statePath = Join-Path $script:RepoRoot 'state.json' | ||
| $stateBackup = if (Test-Path $statePath) { Get-Content $statePath -Raw -Encoding UTF8 } else { $null } | ||
| try { | ||
| @{ | ||
| goal = @{ title = 'Dashboard UI Test Goal' } | ||
| kpi = @{ success_rate_target = 0.9; ci_pass_rate = 1.0; open_p1_issues = 0 } | ||
| execution = @{ phase = 'Verify'; elapsed_minutes = 10; remaining_minutes = 290 } | ||
| token = @{ used = 5; total_budget = 100; remaining = 95 } | ||
| } | ConvertTo-Json -Depth 5 | Set-Content -Path $statePath -Encoding UTF8 | ||
| $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String | ||
| $LASTEXITCODE | Should -Be 0 | ||
| $output | Should -Match 'Dashboard UI Test Goal' | ||
| $output | Should -Match 'Goal.*&.*KPI|Goal & KPI|Goal.*KPI' | ||
| } | ||
| finally { | ||
| if ($null -ne $stateBackup) { | ||
| Set-Content -Path $statePath -Value $stateBackup -Encoding UTF8 | ||
| } |
Comment on lines
+219
to
+225
| It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue #71)' { | ||
| $scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1' | ||
| $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String | ||
| $LASTEXITCODE | Should -Be 0 | ||
| $output | Should -Match '\[Step 9\].*Dashboard' | ||
| $output | Should -Match 'Boot Summary' | ||
| } |
- Write-BootDashboard で各プロパティを .PSObject.Properties.Name で検査してから アクセスするよう変更 (Set-StrictMode -Version Latest 対策) - 全体を try/catch でラップしてダッシュボード描画エラーが boot 終了コードに 影響しないよう保護 - テストの regex を簡潔化: 'Goal.*KPI' → 'Goal' Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 2
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In `@scripts/main/Start-ClaudeOS.ps1`:
- Around line 280-288: The output incorrectly appends a "%" to the remaining
token value; update the Write-Host call that prints Used/Total/Remaining so it
does not add a percent sign to $remaining (or alternatively compute an explicit
percentage from $used and $total before appending '%'). Locate the block that
checks $state.token and references $tok, $used, $remaining, $total and change
the format string ("Used/Total: {0}/{1} Remaining: {2}") to remove the literal
'%' after {2} (or replace {2} with a calculated percentage like
([math]::Round(($total - $used)/$total*100,0)) when you intend to show percent).
In `@tests/StartScripts.Tests.ps1`:
- Around line 219-225: The test block "Start-ClaudeOS.ps1 の Step 9 Dashboard が
state.json なしでも正常終了すること (Issue `#71`)" does not ensure state.json is absent;
update this It test to explicitly back up and remove any existing state.json
before invoking Start-ClaudeOS.ps1 and restore the original file after the test
(use a temp backup filename), so the fallback path is exercised; reference the
test's local variables ($scriptPath, $output) and ensure cleanup runs even on
failure (use Finally/try/finally pattern or AfterEach-equivalent) to guarantee
restoration.
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
Run ID: 2461d54c-46d3-494f-b205-c0e21895e29a
📒 Files selected for processing (2)
scripts/main/Start-ClaudeOS.ps1tests/StartScripts.Tests.ps1
📜 Review details
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (2)
- GitHub Check: Agent
- GitHub Check: test-and-validate
🧰 Additional context used
🧠 Learnings (2)
📓 Common learnings
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:37.774Z
Learning: Applies to Claude/templates/claude/**/state.json : Maintain state.json with goal, kpi, execution, and automation configuration as the single source of truth for autonomous development targets
📚 Learning: 2026-04-14T02:12:37.774Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:37.774Z
Learning: Applies to Claude/templates/claude/**/state.json : Maintain state.json with goal, kpi, execution, and automation configuration as the single source of truth for autonomous development targets
Applied to files:
scripts/main/Start-ClaudeOS.ps1
🪛 PSScriptAnalyzer (1.25.0)
tests/StartScripts.Tests.ps1
[warning] Missing BOM encoding for non-ASCII encoded file 'StartScripts.Tests.ps1'
(PSUseBOMForUnicodeEncodedFile)
scripts/main/Start-ClaudeOS.ps1
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
🔇 Additional comments (2)
scripts/main/Start-ClaudeOS.ps1 (1)
224-236:state.json読み込みのフェイルセーフは適切ですLine 227-235 で「未存在/JSON不正時は
$null」に寄せており、既存 Dashboard の後方互換を崩さない実装になっています。tests/StartScripts.Tests.ps1 (1)
230-250:try/finallyでの state.json 復元処理は良いですLine 230-250 のバックアップ/復元でテスト間の汚染を抑えられており、テストの独立性が保たれています。
Comment on lines
+280
to
+288
| if ($state.token) { | ||
| $tok = $state.token | ||
| $used = if ($null -ne $tok.used) { $tok.used } else { '?' } | ||
| $remaining = if ($null -ne $tok.remaining) { $tok.remaining } else { '?' } | ||
| $total = if ($null -ne $tok.total_budget) { $tok.total_budget } else { '?' } | ||
| Write-Host '' | ||
| Write-Host ' ── Token Budget ────────────────────────────' -ForegroundColor Magenta | ||
| Write-Host (" Used/Total: {0}/{1} Remaining: {2}%" -f $used, $total, $remaining) -ForegroundColor White | ||
| } |
There was a problem hiding this comment.
Token 残量の単位表示が誤解を招きます
Line 287 は remaining（残量の実数値）に % を付与しており、値の意味が変わって見えます。state.schema 上も token.remaining は整数なので、ここは単位なし（または別途割合を計算）にすべきです。
💡 修正案
- Write-Host (" Used/Total: {0}/{1} Remaining: {2}%" -f $used, $total, $remaining) -ForegroundColor White
+ Write-Host (" Used/Total: {0}/{1} Remaining: {2}" -f $used, $total, $remaining) -ForegroundColor White🧰 Tools
🪛 PSScriptAnalyzer (1.25.0)
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@scripts/main/Start-ClaudeOS.ps1` around lines 280 - 288, The output
incorrectly appends a "%" to the remaining token value; update the Write-Host
call that prints Used/Total/Remaining so it does not add a percent sign to
$remaining (or alternatively compute an explicit percentage from $used and
$total before appending '%'). Locate the block that checks $state.token and
references $tok, $used, $remaining, $total and change the format string
("Used/Total: {0}/{1} Remaining: {2}") to remove the literal '%' after {2} (or
replace {2} with a calculated percentage like ([math]::Round(($total -
$used)/$total*100,0)) when you intend to show percent).
Comment on lines
+219
to
+225
| It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue #71)' { | ||
| $scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1' | ||
| $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String | ||
| $LASTEXITCODE | Should -Be 0 | ||
| $output | Should -Match '\[Step 9\].*Dashboard' | ||
| $output | Should -Match 'Boot Summary' | ||
| } |
There was a problem hiding this comment.
state.json 不在テストが不在条件を保証できていません
Line 219-225 は state.json を明示的に退避/削除していないため、既存ファイルがある環境ではフォールバック経路を検証できません。テスト名と実検証内容がズレます。
💡 修正案
It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue `#71`)' {
$scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1'
- $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String
- $LASTEXITCODE | Should -Be 0
- $output | Should -Match '\[Step 9\].*Dashboard'
- $output | Should -Match 'Boot Summary'
+ $statePath = Join-Path $script:RepoRoot 'state.json'
+ $stateBackup = if (Test-Path $statePath) { Get-Content $statePath -Raw -Encoding UTF8 } else { $null }
+ try {
+ Remove-Item $statePath -Force -ErrorAction SilentlyContinue
+ $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String
+ $LASTEXITCODE | Should -Be 0
+ $output | Should -Match '\[Step 9\].*Dashboard'
+ $output | Should -Match 'Boot Summary'
+ $output | Should -Not -Match 'Goal & KPI'
+ }
+ finally {
+ if ($null -ne $stateBackup) {
+ Set-Content -Path $statePath -Value $stateBackup -Encoding UTF8
+ }
+ }
}📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
Suggested change
| It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue #71)' { | |
| $scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1' | |
| $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String | |
| $LASTEXITCODE | Should -Be 0 | |
| $output | Should -Match '\[Step 9\].*Dashboard' | |
| $output | Should -Match 'Boot Summary' | |
| } | |
| It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue `#71`)' { | |
| $scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1' | |
| $statePath = Join-Path $script:RepoRoot 'state.json' | |
| $stateBackup = if (Test-Path $statePath) { Get-Content $statePath -Raw -Encoding UTF8 } else { $null } | |
| try { | |
| Remove-Item $statePath -Force -ErrorAction SilentlyContinue | |
| $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String | |
| $LASTEXITCODE | Should -Be 0 | |
| $output | Should -Match '\[Step 9\].*Dashboard' | |
| $output | Should -Match 'Boot Summary' | |
| $output | Should -Not -Match 'Goal & KPI' | |
| } | |
| finally { | |
| if ($null -ne $stateBackup) { | |
| Set-Content -Path $statePath -Value $stateBackup -Encoding UTF8 | |
| } | |
| } | |
| } |
🧰 Tools
🪛 PSScriptAnalyzer (1.25.0)
[warning] Missing BOM encoding for non-ASCII encoded file 'StartScripts.Tests.ps1'
(PSUseBOMForUnicodeEncodedFile)
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@tests/StartScripts.Tests.ps1` around lines 219 - 225, The test block
"Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue `#71`)"
does not ensure state.json is absent; update this It test to explicitly back up
and remove any existing state.json before invoking Start-ClaudeOS.ps1 and
restore the original file after the test (use a temp backup filename), so the
fallback path is exercised; reference the test's local variables ($scriptPath,
$output) and ensure cleanup runs even on failure (use Finally/try/finally
pattern or AfterEach-equivalent) to guarantee restoration.
There was a problem hiding this comment.
♻️ Duplicate comments (2)
scripts/main/Start-ClaudeOS.ps1 (1)
285-294:⚠️ Potential issue | 🟠 MajorToken Budget の Remaining に
%を付けると値の意味が変わります
remainingは残量の実数として扱っているため、%サフィックスは誤解を招きます。表示を実数のままにするか、割合を別計算して別項目で出してください。修正例
- Write-Host (" Used/Total: {0}/{1} Remaining: {2}%" -f $used, $total, $remaining) -ForegroundColor White + Write-Host (" Used/Total: {0}/{1} Remaining: {2}" -f $used, $total, $remaining) -ForegroundColor White🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@scripts/main/Start-ClaudeOS.ps1` around lines 285 - 294, The Remaining value is shown with a '%' suffix but $tok.remaining is a raw quantity, so update the display in Start-ClaudeOS.ps1 (the block referencing $state.token, $tok, $remaining) to remove the percent sign and show the raw remaining value, or alternatively compute a proper percentage (e.g., remaining/total) and display that as a separate "Remaining (%)" field; modify the Write-Host call that formats "Used/Total: {0}/{1} Remaining: {2}%" to either drop the "%" from the Remaining placeholder or add an extra formatted field for the computed percentage using $tok.remaining and $tok.total_budget.tests/StartScripts.Tests.ps1 (1)
219-225:⚠️ Potential issue | 🟠 Major
state.json不在テストが不在条件を保証できていませんこのままだとリポジトリ直下に既存
state.jsonがある環境で、フォールバック経路を検証できません。テスト内で明示的に退避・削除し、finallyで復元してください。修正例
It 'Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue `#71`)' { $scriptPath = Join-Path $script:RepoRoot 'scripts\main\Start-ClaudeOS.ps1' - $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String - $LASTEXITCODE | Should -Be 0 - $output | Should -Match '\[Step 9\].*Dashboard' - $output | Should -Match 'Boot Summary' + $statePath = Join-Path $script:RepoRoot 'state.json' + $stateBackup = if (Test-Path $statePath) { Get-Content $statePath -Raw -Encoding UTF8 } else { $null } + try { + Remove-Item $statePath -Force -ErrorAction SilentlyContinue + $output = & $script:PowerShellExe -NoProfile -File $scriptPath -NonInteractive 2>&1 | Out-String + $LASTEXITCODE | Should -Be 0 + $output | Should -Match '\[Step 9\].*Dashboard' + $output | Should -Match 'Boot Summary' + $output | Should -Not -Match 'Goal & KPI' + } + finally { + if ($null -ne $stateBackup) { + Set-Content -Path $statePath -Value $stateBackup -Encoding UTF8 + } + } }🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@tests/StartScripts.Tests.ps1` around lines 219 - 225, The test "Start-ClaudeOS.ps1 の Step 9 Dashboard が state.json なしでも正常終了すること (Issue `#71`)" does not ensure state.json is absent; update the test to explicitly detect and move/rename any existing state.json under $script:RepoRoot (or $scriptPath's expected directory) before invoking Start-ClaudeOS.ps1, then delete the moved file so the script runs without state.json, and finally restore the original file in a finally/clean-up block so the environment is returned to its prior state; reference the test block name and the $script:RepoRoot/$scriptPath variables to locate where to add the backup/remove/restore logic.
🧹 Nitpick comments (1)
scripts/main/Start-ClaudeOS.ps1 (1)
230-235: state.json パース失敗時は警告を出した方が運用しやすいです現在は失敗理由が消えるため、
state.json破損時の切り分けが難しくなります。軽い WARN 出力を追加するのを推奨します。Based on learnings: state.json must contain project goals, KPI targets, execution time limits, and serve as the single source of truth.
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@scripts/main/Start-ClaudeOS.ps1` around lines 230 - 235, When parsing state.json fails in the try/catch around Get-Content $statePath | ConvertFrom-Json, add a warning log in the catch block that includes the $statePath and the caught error details ($_ or $_.Exception.Message) so operators can triage corrupted state files; keep returning $null after logging. Target the catch adjacent to Get-Content/ConvertFrom-Json and use a lightweight warning (e.g., Write-Warning or the script's existing logging helper) rather than terminating execution.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Duplicate comments:
In `@scripts/main/Start-ClaudeOS.ps1`:
- Around line 285-294: The Remaining value is shown with a '%' suffix but
$tok.remaining is a raw quantity, so update the display in Start-ClaudeOS.ps1
(the block referencing $state.token, $tok, $remaining) to remove the percent
sign and show the raw remaining value, or alternatively compute a proper
percentage (e.g., remaining/total) and display that as a separate "Remaining
(%)" field; modify the Write-Host call that formats "Used/Total: {0}/{1}
Remaining: {2}%" to either drop the "%" from the Remaining placeholder or add an
extra formatted field for the computed percentage using $tok.remaining and
$tok.total_budget.
In `@tests/StartScripts.Tests.ps1`:
- Around line 219-225: The test "Start-ClaudeOS.ps1 の Step 9 Dashboard が
state.json なしでも正常終了すること (Issue `#71`)" does not ensure state.json is absent;
update the test to explicitly detect and move/rename any existing state.json
under $script:RepoRoot (or $scriptPath's expected directory) before invoking
Start-ClaudeOS.ps1, then delete the moved file so the script runs without
state.json, and finally restore the original file in a finally/clean-up block so
the environment is returned to its prior state; reference the test block name
and the $script:RepoRoot/$scriptPath variables to locate where to add the
backup/remove/restore logic.
---
Nitpick comments:
In `@scripts/main/Start-ClaudeOS.ps1`:
- Around line 230-235: When parsing state.json fails in the try/catch around
Get-Content $statePath | ConvertFrom-Json, add a warning log in the catch block
that includes the $statePath and the caught error details ($_ or
$_.Exception.Message) so operators can triage corrupted state files; keep
returning $null after logging. Target the catch adjacent to
Get-Content/ConvertFrom-Json and use a lightweight warning (e.g., Write-Warning
or the script's existing logging helper) rather than terminating execution.
ℹ️ Review info
⚙️ Run configuration
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
Run ID: f66d9276-70d1-4bb8-bfca-1b4c8570ed3f
📒 Files selected for processing (2)
scripts/main/Start-ClaudeOS.ps1tests/StartScripts.Tests.ps1
📜 Review details
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)
- GitHub Check: test-and-validate
🧰 Additional context used
🧠 Learnings (8)
📓 Common learnings
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:37.774Z
Learning: Applies to Claude/templates/claude/**/state.json : Maintain state.json with goal, kpi, execution, and automation configuration as the single source of truth for autonomous development targets
📚 Learning: 2026-04-14T02:12:37.774Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:37.774Z
Learning: Applies to Claude/templates/claude/**/state.json : Maintain state.json with goal, kpi, execution, and automation configuration as the single source of truth for autonomous development targets
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:45:17.067Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-14T02:45:17.067Z
Learning: Applies to state.json : state.json must contain project goals, KPI targets, execution time limits, and automation settings. This file serves as the single source of truth for Goal Driven System operations. Structure must include: goal.title, kpi.success_rate_target, execution.max_duration_minutes, and automation flags.
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:45:17.067Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-14T02:45:17.067Z
Learning: Enforce Goal Driven System: state.json is the single source of truth for project goals. Issues are tools to achieve goals, not ends themselves. Auto-generate Issues when KPI targets are not met. Suppress P3 issues if P1 issues remain unsolved.
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:12:37.774Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:37.774Z
Learning: Use Goal Driven System with state.json as the single objective reference - generate issues as means to achieve goals, auto-generate issues when KPI is unmet, and suppress large changes when goals are undefined
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:12:54.820Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.820Z
Learning: Applies to state.json : Store remaining time management in state.json to track time budget across execution phases
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:45:17.067Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-14T02:45:17.067Z
Learning: Apply strict token budgeting across phases: Monitor 10%, Development 35%, Verify 20%, Improvement 10%, Debug 15%, IssueFactory 5%, Release 5%. Respond to consumption rates: at 70% stop Improvement, at 85% prioritize Verify, at 95% enable safe shutdown.
Applied to files:
scripts/main/Start-ClaudeOS.ps1
📚 Learning: 2026-04-14T02:13:12.468Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.468Z
Learning: Skip Improve phase when token usage reaches 70%; run Verify only at 85%; halt immediately at 95%
Applied to files:
scripts/main/Start-ClaudeOS.ps1
🪛 PSScriptAnalyzer (1.25.0)
tests/StartScripts.Tests.ps1
[warning] Missing BOM encoding for non-ASCII encoded file 'StartScripts.Tests.ps1'
(PSUseBOMForUnicodeEncodedFile)
scripts/main/Start-ClaudeOS.ps1
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
[warning] Missing BOM encoding for non-ASCII encoded file 'Start-ClaudeOS.ps1'
(PSUseBOMForUnicodeEncodedFile)
🔇 Additional comments (2)
scripts/main/Start-ClaudeOS.ps1 (1)
224-236: state.json 読み込みのフェイルセーフ実装は適切ですファイル不存在や JSON 例外時に
$nullへフォールバックする実装で、ブート全体を止めない設計になっている点は良いです。tests/StartScripts.Tests.ps1 (1)
227-251:state.jsonありケースのテスト隔離は適切です
try/finallyで復元/削除しており、テスト間汚染を防げています。
This was referenced Apr 14, 2026
Kensan196948G
added a commit
that referenced
this pull request
Apr 14, 2026
v2.9.0 セクションを `[v2.9.0-dev] - 2026-04-08` から `[v2.9.0] - 2026-04-14 (STABLE)` に更新し、 ClaudeOS v7.5 の全成果 (Boot Sequence Step 3/7/9 完全実装、CodeRabbit 統合、 /team-onboarding、ループ時間最適化、Issue Sync 修正) を反映。 新規に `[v3.0.0] - Unreleased` セクションを追加し、Phase 4 残タスク (セキュリティ監査 / E2E テスト / リリースタグ) と Go/No-Go 基準を明文化。 - テスト数: 304 → 311 件に更新 - 追加 PR: #77, #79, #80, #81, #82, #83, #84, #86, #87, #88, #89 Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Kensan196948G
added a commit
that referenced
this pull request
Apr 14, 2026
v2.9.0 セクションを `[v2.9.0-dev] - 2026-04-08` から `[v2.9.0] - 2026-04-14 (STABLE)` に更新し、 ClaudeOS v7.5 の全成果 (Boot Sequence Step 3/7/9 完全実装、CodeRabbit 統合、 /team-onboarding、ループ時間最適化、Issue Sync 修正) を反映。 新規に `[v3.0.0] - Unreleased` セクションを追加し、Phase 4 残タスク (セキュリティ監査 / E2E テスト / リリースタグ) と Go/No-Go 基準を明文化。 - テスト数: 304 → 311 件に更新 - 追加 PR: #77, #79, #80, #81, #82, #83, #84, #86, #87, #88, #89 Co-authored-by: 有藤 健太郎 <k-aritoh@mirai-const.co.jp> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
Start-ClaudeOS.ps1Step 9 (Dashboard) にstate.json統合を実装 (Option A: PowerShell TUI 強化)Get-StateJsonDashboardヘルパー関数で state.json を安全に読み込みWrite-BootDashboardに-Rootパラメータを追加し、以下を表示:state.json不在時は従来の Boot Summary のみ表示（後方互換を維持）設計判断
Option A (PowerShell TUI 強化) を採用:
Write-BootDashboardの自然な拡張Test plan
state.jsonなしでLASTEXITCODE 0— PASSstate.jsonの Goal title がダッシュボードに表示される — PASSBoot Summaryの OK/SKIP/FAIL カウントが正しく表示される — PASS影響範囲
scripts/main/Start-ClaudeOS.ps1— Step 9 Dashboard 拡張tests/StartScripts.Tests.ps1— Dashboard テスト 2 件追加残課題
current_work.description表示は次フェーズ検討Closes #71
🤖 Generated with Claude Code
Summary by CodeRabbit
リリースノート
新機能
テスト