feat(v8.2): Opus 4.7 最適化 + Anthropic 公式ベストプラクティス全反映 - #142
Conversation
P0 (必須): - Token 配分を Opus 4.7 新 tokenizer (1.35x) に再キャリブレーション (CLAUDE.md §13) - Agent Teams 起動時の並列 spawn 明示プリアンブル追加 (CLAUDE.md §6) - /compact 事前発動規約化: Token 70% / Verify 失敗 3 回 / フェーズ切替 / rescue 直前 / 2h 超過 (CLAUDE.md §12) P1 (推奨): - task_budget (beta) を 5h 運用に導入 (CLAUDE.md §13.5) - ENABLE_PROMPT_CACHING_1H を CLAUDE.md / state.json ブロックに適用 (settings.json + §13.6) - /ultrareview を Verify 必須に統合 (CLAUDE.md §8.6) - PreCompact hook で state.json 自動退避 (settings.json + pre-compact.js) P2 (任意): - /recap をセッション開始時に必須化 (CLAUDE.md §0 ステップ 4.5) - Push Notification を STABLE/Blocked/5h 終了/Critical Review に接続 (notify-stable.js) - Effort 動的切替 (xhigh ⇄ high ⇄ medium) WorkTree 並列度・Token 残量連動 (CLAUDE.md §10.5) F (文体): - 比喩・冗長記述を削減し強制ルールとリファレンス境界を明示 (CLAUDE.md §22, §24) Hook 実装 (claudeos/scripts/hooks/): - pre-compact.js: snapshot 退避 + state.json 失敗時 exitCode 2 ブロック - session-start.js: 前回コンテキスト読み出し + /recap 代替 - session-end.js: last_stop_at 記録 - suggest-compact.js: §12 規約のプログラム化 - notify-stable.js: STABLE / Blocked / 5h / Critical Review 通知 Refs: 4 source URLs analysis - claude.com/blog/using-claude-code-session-management-and-1m-context - claude.com/blog/best-practices-for-using-claude-opus-4-7-with-claude-code - platform.claude.com/docs/en/about-claude/models/migration-guide#migrating-to-claude-opus-4-7 - code.claude.com/docs/en/changelog (v2.1.90 - v2.1.111) Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
Note Reviews pausedIt looks like this branch is under active development. To avoid overwhelming you with review comments due to an influx of new commits, CodeRabbit has automatically paused this review. You can configure this behavior by changing the Use the following commands to manage reviews:
Use the checkboxes below for quick actions:
No actionable comments were generated in the recent review. 🎉 ℹ️ Recent review info⚙️ Run configurationConfiguration used: Organization UI Review profile: CHILL Plan: Pro Run ID: 📒 Files selected for processing (1)
✅ Files skipped from review due to trivial changes (1)
📜 Recent review details⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)
📝 WalkthroughWalkthroughセッション関連とコンパクト運用の5つの Node.js フックを追加・拡張し、state.json を中心にスナップショット作成、/compact 推奨、停止時タイムスタンプ記録、および STABLE/Blocked/重大指摘/5時間到達の通知送出を統合しました。 Changes
Sequence Diagram(s)sequenceDiagram
participant SessionEnd as "SessionEnd Hook"
participant Notify as "notify-stable.js"
participant FS as "FileSystem (state.json)"
participant CLI as "claude CLI"
SessionEnd->>FS: read `state.json` (sync)
SessionEnd->>Notify: require('./notify-stable.js') && call run()
Notify->>FS: read `state.json`
Notify->>Notify: collectEvents(state) → events[]
par For each event
Notify->>CLI: execFileSync("claude","push-notify",...) (5s timeout)
CLI-->>Notify: success / throws
alt CLI failure
Notify->>FS: console.log fallback (stdout)
end
end
Notify->>FS: write updated `state.notification` if changed
Notify-->>SessionEnd: return (errors logged, process exits 0)
推定レビュー工数🎯 4 (Complex) | ⏱️ ~60 minutes Poem
🚥 Pre-merge checks | ✅ 2 | ❌ 1❌ Failed checks (1 warning)
✅ Passed checks (2 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. ✨ Finishing Touches🧪 Generate unit tests (beta)
Comment |
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 7
🧹 Nitpick comments (5)
.claude/claudeos/scripts/hooks/pre-compact.js (2)
40-48: TOCTOU (Time-of-Check to Time-of-Use) の軽微なリスク
fs.existsSync()とfs.copyFileSync()の間でstate.jsonが削除される可能性があります。実用上は稀ですが、copyFileSyncを直接 try-catch で囲む方がより堅牢です。🛡️ 推奨される修正
function snapshotState() { - if (!fs.existsSync(STATE_FILE)) { - return { skipped: true, reason: "state.json not found" }; - } ensureDir(SNAPSHOT_DIR); const dest = path.join(SNAPSHOT_DIR, `state.${timestamp()}.json`); - fs.copyFileSync(STATE_FILE, dest); - return { snapshotPath: dest }; + try { + fs.copyFileSync(STATE_FILE, dest); + return { snapshotPath: dest }; + } catch (err) { + if (err.code === "ENOENT") { + return { skipped: true, reason: "state.json not found" }; + } + throw err; + } }🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In @.claude/claudeos/scripts/hooks/pre-compact.js around lines 40 - 48, The snapshotState function currently uses fs.existsSync(STATE_FILE) before fs.copyFileSync, which leaves a TOCTOU window; remove the reliance on the pre-check and wrap the copy in a try-catch (inside snapshotState after ensureDir(SNAPSHOT_DIR)) so that fs.copyFileSync(STATE_FILE, dest) is attempted directly and any errors are handled: on ENOENT or other filesystem errors return { skipped: true, reason: "<appropriate message>" } or propagate as needed; keep references to STATE_FILE, SNAPSHOT_DIR, timestamp(), ensureDir and dest so the change is localized to snapshotState.
58-71: スナップショット数が多い場合のパフォーマンス考慮
pruneOldSnapshots()で各ファイルに対してfs.statSync()を呼び出しています。通常の運用（20件程度の保持）では問題ありませんが、一時的に大量のファイルが存在した場合にブロッキング I/O が増加します。現状の実装は許容範囲ですが、将来的に問題が生じた場合は非同期版への移行を検討してください。
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In @.claude/claudeos/scripts/hooks/pre-compact.js around lines 58 - 71, pruneOldSnapshots currently uses blocking fs.statSync and fs.unlinkSync which can cause heavy blocking when many files exist; convert it to an asynchronous implementation by using fs.promises (or async variants) for readdir, stat, and unlink: check for SNAPSHOT_DIR existence (fs.existsSync or try/catch with fs.promises.access), await fs.promises.readdir(SNAPSHOT_DIR), map files to async stat calls and await Promise.all to collect mtime values, sort by mtime, then await Promise.all on fs.promises.unlink for files beyond the keep count so the function remains non-blocking; keep the same filtering by name ("state.*.json") and the default keep parameter and preserve error handling as appropriate.CLAUDE.md (1)
134-149: state.json 構造例のallocationが省略記法
"allocation": { ... }が省略されていますが、他の部分は具体的な値が記載されています。読者の理解のために、少なくとも 1-2 フェーズの例を含めるか、参照先を明示することを推奨します。📝 提案
"token": { "total_budget": 100, "tokenizer_calibration": "opus-4-7", "calibration_factor": 1.35, - "allocation": { ... } + "allocation": { "monitor": 10, "development": 35, "verify": 25, ... } },🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@CLAUDE.md` around lines 134 - 149, The state.json example shows "token" with an "allocation" field using an ellipsis ("allocation": { ... }) which is too vague; replace the ellipsis by providing at least one concrete example of allocation phases (e.g., two phase entries with keys and token counts) or add an explicit reference link to the detailed schema; update the sample under "token" -> "allocation" and mention the related sections (§13/§13.5) so readers can either see a minimal 1–2 phase example or follow the precise schema reference..claude/claudeos/scripts/hooks/notify-stable.js (1)
69-79: Blocked イベントの重複キーが不安定
JSON.stringify(codex.blocking_issues || [])を重複排除キーに使用していますが、配列のプロパティ順序が変わると同じ内容でも異なるキーが生成され、重複通知の原因になります。♻️ 安定したキー生成の提案
if ( notif.blocked && (codex.severity === "high" || (codex.blocking_issues || []).length > 0) ) { + const issueCount = (codex.blocking_issues || []).length; events.push({ - key: "blocked_" + JSON.stringify(codex.blocking_issues || []), + key: `blocked_${codex.severity}_${issueCount}`, title: "Blocked", - body: `severity=${codex.severity}, issues=${(codex.blocking_issues || []).length}`, + body: `severity=${codex.severity}, issues=${issueCount}`, }); }🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In @.claude/claudeos/scripts/hooks/notify-stable.js around lines 69 - 79, The current events.push uses JSON.stringify(codex.blocking_issues || []) for the key which can vary by element order and cause duplicate notifications; make the key stable by deterministically sorting or normalizing codex.blocking_issues before stringifying (e.g., derive a stable array from codex.blocking_issues via slice + sort by a stable property or JSON string, or map items to primitive ids and sort those) and then use that normalized value in the key passed to events.push (update the block that references notif.blocked, codex.severity, codex.blocking_issues and the events.push key generation)..claude/claudeos/system/token-budget.md (1)
60-66: フェーズ別配分（Monitor/Development/Verify...）をこの文書内にも明記するのを推奨します。calibration の式は明確ですが、実運用の初期配分表が本ファイル単体では追いづらいです。運用手順書として自己完結性を上げるため、配分比率と70/85/95%時の動作を併記すると良いです。
Based on learnings:
Allocate token budget across phases: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release/Report (5%). Reduce scope when consumption exceeds 70%. Prioritize Verify at 85% consumption. Force safe shutdown at 95% consumption.🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In @.claude/claudeos/system/token-budget.md around lines 60 - 66, Add a self-contained "Phase allocations and threshold behavior" section to the token-budget doc that references task_budget (state.json `task_budget.total_tokens`) and the Opus header `task-budgets-2026-03-13`; list the recommended allocation percentages per phase (Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%, Release/Report 5%) and specify operational rules at consumption thresholds: reduce scope at ≥70%, prioritize Verify at ≥85%, and force safe shutdown at ≥95%; ensure the new text is colocated near the existing calibration formula and the "task_budget (beta) 連携" paragraph so readers can see calibration, allocations, and threshold actions together.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In @.claude/claudeos/scripts/hooks/session-end.js:
- Around line 23-33: The session-end hook reads/writes STATE_FILE using
readJson/writeJson and unconditionally sets state.execution.last_stop_at, which
races with notify-stable.js that mutates other fields; to fix it, implement an
atomic read-modify-merge or file-lock around the read/write: acquire a short
lock for STATE_FILE (or retry-on-conflict), re-read the latest state before
updating state.execution.last_stop_at, merge the execution field into the
current state (preserving other top-level fields like notification), then write
back; refer to STATE_FILE, readJson, writeJson and the
state.execution.last_stop_at update in session-end.js (or alternatively
coordinate execution order with notify-stable.js) so concurrent updates are not
lost.
In @.claude/claudeos/snapshots/.gitignore:
- Around line 1-3: The comment in .gitignore mentions tracking the directory
with a .gitkeep file but none exists; either add an empty .gitkeep file to the
snapshots directory so the directory is tracked by Git, or remove/update the
comment in the .gitignore to reflect reality; ensure the existing ignore pattern
state.*.json remains unchanged unless you intentionally want to stop ignoring
those snapshot artifacts.
In @.claude/claudeos/system/token-budget.md:
- Around line 45-47: The documentation lists hook paths as
"claudeos/scripts/hooks/..." but the actual files live under
".claude/claudeos/scripts/hooks/...", causing misleading links; update the
references for PreCompact hook (PreCompact hook /
claudeos/scripts/hooks/pre-compact.js), suggest-compact
(claudeos/scripts/hooks/suggest-compact.js) and notify-stable
(claudeos/scripts/hooks/notify-stable.js) to the correct repository paths
prefixed with ".claude/" (i.e., ".claude/claudeos/scripts/hooks/..."), or
alternatively move/alias the files so the documented paths match the real
locations and ensure any relative link targets in token-budget.md are adjusted
accordingly.
- Around line 1-78: The document .claude/claudeos/system/token-budget.md must be
restructured into the required four-section format: Summary, Risks, Findings,
Next Action (in that exact order); move current content under those headings
(e.g., the "Opus 4.7 Calibration" block, "Budget Zones" table, "Behavior",
"Integration" and "Actions" should be reorganized so key items like
calibration_factor, task_budget/task-budgets-2026-03-13 header,
effort_strategy.current, pre-compact.js and suggest-compact.js hooks are placed
in Findings (technical details) or Risks (operational impacts) as appropriate,
and list concrete Next Action steps (e.g., apply 1.35x calibration formula,
trigger /compact at 70%, enforce effort switching thresholds); ensure Risks
appears before Findings and keep each section concise and bulletized.
In @.claude/settings.json:
- Around line 7-8: Summary: The ENABLE_PROMPT_CACHING_1H setting is using the
wrong value type. Fix: locate the JSON key "ENABLE_PROMPT_CACHING_1H" and change
its string value from "true" to "1" (the boolean/TTL flag expected by the
runtime); keep other settings like "CLAUDE_CODE_ENABLE_PROMPT_SUGGESTION"
unchanged and ensure the JSON remains valid after the edit.
- Around line 44-58: The two Stop hooks ("session-end.js" and
"notify-stable.js") run in parallel and can race when both read/write
state.json; fix by either merging their logic into a single script invoked in
Stop (combine session-end.js and notify-stable.js into one file and call that),
or implement a file-locking strategy around state.json access (add advisory
locking/unlocking in both session-end.js and notify-stable.js, e.g., acquire
lock before reading/writing state.json and release after) so only one hook
mutates state.json at a time.
In `@CLAUDE.md`:
- Around line 757-762: Update the extended thinking bullet to replace the
incorrect syntax `thinking: {type: "enabled", budget_tokens: N}` with the
correct adaptive thinking form `thinking: {"type": "adaptive"}` and add guidance
that adaptive thinking is controlled via `output_config` (e.g., `output_config:
{"effort": "xhigh"|"high"|"medium"|"low"}`), removing any mention of a
budget_tokens numeric parameter and showing a short example of using the
adaptive `thinking` with `output_config.effort`.
---
Nitpick comments:
In @.claude/claudeos/scripts/hooks/notify-stable.js:
- Around line 69-79: The current events.push uses
JSON.stringify(codex.blocking_issues || []) for the key which can vary by
element order and cause duplicate notifications; make the key stable by
deterministically sorting or normalizing codex.blocking_issues before
stringifying (e.g., derive a stable array from codex.blocking_issues via slice +
sort by a stable property or JSON string, or map items to primitive ids and sort
those) and then use that normalized value in the key passed to events.push
(update the block that references notif.blocked, codex.severity,
codex.blocking_issues and the events.push key generation).
In @.claude/claudeos/scripts/hooks/pre-compact.js:
- Around line 40-48: The snapshotState function currently uses
fs.existsSync(STATE_FILE) before fs.copyFileSync, which leaves a TOCTOU window;
remove the reliance on the pre-check and wrap the copy in a try-catch (inside
snapshotState after ensureDir(SNAPSHOT_DIR)) so that fs.copyFileSync(STATE_FILE,
dest) is attempted directly and any errors are handled: on ENOENT or other
filesystem errors return { skipped: true, reason: "<appropriate message>" } or
propagate as needed; keep references to STATE_FILE, SNAPSHOT_DIR, timestamp(),
ensureDir and dest so the change is localized to snapshotState.
- Around line 58-71: pruneOldSnapshots currently uses blocking fs.statSync and
fs.unlinkSync which can cause heavy blocking when many files exist; convert it
to an asynchronous implementation by using fs.promises (or async variants) for
readdir, stat, and unlink: check for SNAPSHOT_DIR existence (fs.existsSync or
try/catch with fs.promises.access), await fs.promises.readdir(SNAPSHOT_DIR), map
files to async stat calls and await Promise.all to collect mtime values, sort by
mtime, then await Promise.all on fs.promises.unlink for files beyond the keep
count so the function remains non-blocking; keep the same filtering by name
("state.*.json") and the default keep parameter and preserve error handling as
appropriate.
In @.claude/claudeos/system/token-budget.md:
- Around line 60-66: Add a self-contained "Phase allocations and threshold
behavior" section to the token-budget doc that references task_budget
(state.json `task_budget.total_tokens`) and the Opus header
`task-budgets-2026-03-13`; list the recommended allocation percentages per phase
(Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%,
Release/Report 5%) and specify operational rules at consumption thresholds:
reduce scope at ≥70%, prioritize Verify at ≥85%, and force safe shutdown at
≥95%; ensure the new text is colocated near the existing calibration formula and
the "task_budget (beta) 連携" paragraph so readers can see calibration,
allocations, and threshold actions together.
In `@CLAUDE.md`:
- Around line 134-149: The state.json example shows "token" with an "allocation"
field using an ellipsis ("allocation": { ... }) which is too vague; replace the
ellipsis by providing at least one concrete example of allocation phases (e.g.,
two phase entries with keys and token counts) or add an explicit reference link
to the detailed schema; update the sample under "token" -> "allocation" and
mention the related sections (§13/§13.5) so readers can either see a minimal 1–2
phase example or follow the precise schema reference.
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
Run ID: d6f62793-f172-4b55-a88e-ed692c353e90
📒 Files selected for processing (10)
.claude/claudeos/scripts/hooks/notify-stable.js.claude/claudeos/scripts/hooks/pre-compact.js.claude/claudeos/scripts/hooks/session-end.js.claude/claudeos/scripts/hooks/session-start.js.claude/claudeos/scripts/hooks/suggest-compact.js.claude/claudeos/snapshots/.gitignore.claude/claudeos/snapshots/.gitkeep.claude/claudeos/system/token-budget.md.claude/settings.jsonCLAUDE.md
📜 Review details
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (3)
- GitHub Check: Agent
- GitHub Check: test-and-validate
- GitHub Check: PSScriptAnalyzer
🧰 Additional context used
📓 Path-based instructions (1)
{docs/**,**.md,.claude/**}
📄 CodeRabbit inference engine (AGENTS.md)
Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Files:
.claude/claudeos/scripts/hooks/session-end.js.claude/claudeos/scripts/hooks/session-start.js.claude/claudeos/scripts/hooks/notify-stable.js.claude/settings.json.claude/claudeos/scripts/hooks/suggest-compact.js.claude/claudeos/scripts/hooks/pre-compact.js.claude/claudeos/system/token-budget.mdCLAUDE.md
🧠 Learnings (63)
📓 Common learnings
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:10:32.189Z
Learning: Use the Repository pattern for data access
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/.claude/CLAUDE.md : Project-specific configuration should be placed at `.claude/CLAUDE.md` in the repository root and overrides global Claude settings when necessary
Applied to files:
.claude/claudeos/snapshots/.gitignore.claude/settings.jsonCLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Applied to files:
.claude/claudeos/snapshots/.gitignore.claude/settings.jsonCLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md whenever the following changes: user-facing features, setup procedures, architecture, or quality gates. Treat README as the external-facing truth. Do not leave README unable to withstand external explanation.
Applied to files:
.claude/claudeos/snapshots/.gitignoreCLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md when any of these change: user-facing features, setup procedures, architecture, quality gates. Use tables, icons, and diagrams liberally. Maintain as external-facing truth and never leave it unable to explain to external audiences
Applied to files:
.claude/claudeos/snapshots/.gitignoreCLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: On session end, execute: commit → push → PR creation → state.json save → Memory MCP save. Output final report including: development summary, CI results, review findings, rescue results, remaining issues, next actions.
Applied to files:
.claude/claudeos/scripts/hooks/session-end.jsCLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Session startup: Automatically register four loop commands in order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
.claude/claudeos/scripts/hooks/session-start.jsCLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Execute the following 4 loop commands in order at session start: `/loop 30min ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h15m ClaudeOS Verify`, `/loop 1h15m ClaudeOS Improvement`. Do not begin normal development work until all 4 registrations are complete.
Applied to files:
.claude/claudeos/scripts/hooks/session-start.jsCLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Use `/compact` command at phase transitions (Monitor→Development, Development→Verify, Verify→Improvement, Improvement→Monitor) to prevent context rot when 3000+ lines of tool output or 2+ rescues occur in a phase
Applied to files:
.claude/claudeos/scripts/hooks/suggest-compact.js.claude/claudeos/scripts/hooks/pre-compact.jsCLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Allocate token budget across phases: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release/Report (5%). Reduce scope when consumption exceeds 70%. Prioritize Verify at 85% consumption. Force safe shutdown at 95% consumption.
Applied to files:
.claude/claudeos/system/token-budget.mdCLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Dynamically reallocate token budget across phases: +20% to Verify and -20% from Build on CI failure; +10% to Improve and -10% from Build on stability
Applied to files:
.claude/claudeos/system/token-budget.mdCLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Dynamically reallocate token budget when needed: add 20% to Verify and subtract 20% from Build during CI failures; add 10% to Improve and subtract 10% from Build during stable periods
Applied to files:
.claude/claudeos/system/token-budget.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Manage token budget according to phases: Monitor (10%), Build (40%), Verify (30%), Improve (20%)
Applied to files:
.claude/claudeos/system/token-budget.mdCLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Apply automatic token budget thresholds: skip Improvement phase at 70%, run Verify-only at 85%, terminate immediately at 95%
Applied to files:
.claude/claudeos/system/token-budget.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply token allocation across phases: Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%, Release/Report 5%; stop Improvement at 70% consumption, prioritize Verify at 85%, execute safe shutdown at 95%
Applied to files:
.claude/claudeos/system/token-budget.mdCLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: At 70% token budget: stop Improve phase; at 85%: prioritize Verify phase; at 95%: perform safe shutdown
Applied to files:
.claude/claudeos/system/token-budget.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/*.{js,ts,jsx,tsx} : Code comments may be in English; all other documentation, explanations, and user-facing content must be in Japanese
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define README update policy in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define project language in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/.github/projects/** : Maintain GitHub Projects status transitions through sequence: Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done/Blocked, updating at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Initialize the 4 required loops in the specified order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to .claude/claudeos/** : Organize code in `.claude/claudeos` directory containing agents, skills, commands, rules, hooks, scripts, contexts, examples, mcp-configs, and kernel documentation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define test procedures in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Follow operational loop sequence: Monitor (30min) → Build (2h) → Verify (1h15m) → Improve (1h15m), with loop selection based on current work activity rather than elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Follow the autonomous loop structure: Monitor (30m) → Build (2h) → Verify (1h) → Improve (1h), with total runtime capped at 5 hours
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Operational loop priority order: Verify > Build > Monitor > Improve; loop transitions based on current work phase, not elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:19.210Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/copilot/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:19.210Z
Learning: Follow the standard loop process: analyze situation → Main Agent discussion → decompose tasks → assign to custom agents/Fleet → implement/review/update → verify with Hooks/Tests/CI → update PR/Issue → improve or complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:11:48.062Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: .github/copilot-instructions.md:0-0
Timestamp: 2026-04-14T02:11:48.062Z
Learning: Follow the standard operation loop: situation analysis → Main Agent discussion → task decomposition → custom agent/Fleet assignment → implementation/investigation/review/documentation → hooks/tests/CI confirmation → PR/Issue/summary updates → improvement or completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Implement mandatory end-of-session processing: organize current work, commit minimally, push, create PR (Draft acceptable), update GitHub Projects status, document test/lint/build/CI results, prepare handoff notes with remaining issues and restart point
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: At 5-hour session limit, minimize and commit current work, push to branch, create PR (Draft acceptable), update GitHub Projects status, compile test/lint/build/CI results, document remaining tasks and restart point, add session summary to README.md, and generate final report
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Respect core operation principles: make small changes with comprehensive testing, achieve stability before deployment, require review before merge, fix minimally, stay within budget constraints, stop safely at 5-hour limit, always document, use one tab per project, rest on Sunday
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Design orchestration as manager-worker pattern rather than reproducing the literal Agent Teams name in Codex autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to state.json : Keep state.json synchronized with current project goals, KPIs, and improvement state
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Maintain single source of truth via state.json with goal, KPI, execution settings, and automation config for autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to state.json : Keep state.json as the single source of truth for project goals, KPIs, execution parameters, and automation settings
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use SubAgent for small tasks (lint fixes, single-function additions); use Agent Teams for large changes (full-stack modifications, security reviews). Prohibit Agent Teams for: lint fixes only, small bug fixes, sequential dependent tasks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use Agent Teams for complex tasks with defined roles: CTO, ProductManager, Architect, Developer, Reviewer, Debugger, QA, Security, DevOps, Analyst, EvolutionManager, ReleaseManager, each with specific responsibilities
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex review at PR stage: `/codex:review --base main --background`, and execute adversarial review (`/codex:adversarial-review`) for authentication, authorization, DB schema, concurrency, or pre-release changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Execute `/coderabbit:review committed --base main` before PR creation, `/coderabbit:review all --base main` during Verify phase, and `/coderabbit:review uncommitted` after fixes for code quality checks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Execute Codex setup commands (`/codex:setup` and `/codex:status`) at session start, with `--enable-review-gate` flag only before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Integrate CodeRabbit CLI for static analysis in Verify/Review phases: execute `/coderabbit:review committed --base main` before PR creation and `/coderabbit:review all --base main` during Verify phase as complement to Codex deep review
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex setup at session start: `/codex:setup` and `/codex:status`, with optional `--enable-review-gate` flag only immediately before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply STABLE judgement only when all criteria pass: test success, lint success, build success, CI success, review OK, security OK, error 0, with required consecutive success count: 2 for small changes, 3 for normal, 5 for critical (auth/security/DB)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Only consider changes STABLE when all conditions are met: test success, lint success, build success, CI success, review OK, security OK, error count = 0, with required consecutive success runs (2 for small, 3 for normal, 5 for critical changes)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Require user confirmation for push/merge/branch deletion/release operations and for breaking changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Center Codex implementation around core commands: `exec`, `review`, `resume`, `fork`, `mcp`
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: STABLE status requires: test success, lint success, build success, CI success, zero errors, and zero critical security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: At 5-hour session end, execute different branching: (1) if STABLE achieved: merge → deploy → final report; (2) if STABLE not achieved: create Draft PR + record restart points; (3) if error occurred: mark as Blocked + raise Issue + record recovery strategy.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {test/**,**.test.{js,ts,tsx},**.spec.{js,ts,tsx},.eslintrc*,tsconfig.json,**/.github/workflows/**,**.yml,**.yaml} : Implement STABLE judgment criteria: all of install, lint, test, build, and CI must pass with zero errors and zero security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Achieve STABLE status (zero errors, zero security issues) across install/lint/test/build/CI before considering work complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Minimum CI requirements: lint, unit test, build, and dependency/security scan
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: All CI checks (install, lint, test, build) must pass before merging to main
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: main branch direct push is prohibited; branch or WorkTree is required, and PR is mandatory with CI success before merge
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Require user confirmation for: `push`, `merge`, `delete branch`, `release`, permission changes beyond sandbox, and destructive changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Update GitHub Projects status with transitions: `Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done / Blocked` at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Designate one WorkTree per Issue and allow parallel execution, but prohibit direct main branch push and require PR-based integration controlled by CTO or ReleaseManager
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use WorkTree for parallel development: one Issue per WorkTree, branch or WorkTree required, no direct main push. WorkTree not required for: single-file small fixes, documentation-only updates
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/.ci/**,**/workflow/** : Implement minimum CI quality gates: lint, unit test, build, and dependency/security scanning. Document if CI is not yet implemented
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Enforce maximum work session time of 5 hours (strict enforcement), with token and time management: stop improvements at 70% token consumption, prioritize Verify at 85%, execute safe shutdown at 95%, and prepare ending at <30min remaining
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {state.json,.codex/**} : Implement time-based execution safeguards in state management: skip Improve below 30 minutes remaining, Verify-only below 15 minutes, end preparation below 10 minutes, immediate termination below 5 minutes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Stop work and prepare for handoff when remaining time drops below 30 minutes (skip Improve), 15 minutes (Verify only), 10 minutes (prepare conclusion), or 5 minutes (immediate halt)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Manage 5-hour session maximum: at < 30min remaining stop Improvement, at < 15min use Verify-only mode, at < 10min prepare shutdown, at < 5min execute immediate shutdown with state preservation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {docs/**,**.md,.claude/**} : Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Applied to files:
CLAUDE.md
🪛 LanguageTool
.claude/claudeos/system/token-budget.md
[grammar] ~65-~65: Ensure spelling is correct
Context: ...task_budget.total_tokens(既定 128000) を Opus 4.7 ヘッダtask-budgets-2026-03-13` で渡し、モ...
(QB_NEW_EN_ORTHOGRAPHY_ERROR_IDS_1)
🔇 Additional comments (7)
.claude/claudeos/scripts/hooks/session-start.js (1)
1-40: LGTM!セッション開始時の state.json 読み取りと前回コンテキストのログ出力が適切に実装されています。
readJson()のエラーハンドリングも適切で、ファイル不在時は "fresh session" として正常終了します。.claude/claudeos/scripts/hooks/pre-compact.js (1)
73-88: LGTM - エラーハンドリングと終了コードトップレベルの try-catch でエラーを捕捉し、
exitCode 2で/compactをブロックする設計は Claude Code hook 仕様に準拠しています。成功時のexitCode 0も適切です。.claude/claudeos/scripts/hooks/notify-stable.js (2)
95-103: 複数イベント発生時の重複排除ロジックの問題
forEach内でlast_sent_eventを更新していますが、最初のlastKeyチェックは更新前の値を使用するため、同一実行内の複数イベントは全て送信されます。これが意図的な動作であれば問題ありませんが、最後に処理したイベントのみがlast_sent_eventに記録されるため、次回実行時に他のイベントが再送信される可能性があります。意図した動作かどうか確認してください。
24-38:⚠️ Potential issue | 🟠 Majorシェルコマンドインジェクションのリスク
JSON.stringify()はシェルエスケープには不十分です。titleやbodyに特殊文字（例:$(...), バッククォート）が含まれる場合、意図しないコマンドが実行される可能性があります。🔒 推奨される修正
function send(channel, title, body) { try { const { execSync } = require("child_process"); - execSync( - `claude push-notify --title ${JSON.stringify(title)} --body ${JSON.stringify(body)}`, - { stdio: "ignore", timeout: 5000 } - ); + const { spawnSync } = require("child_process"); + const result = spawnSync("claude", ["push-notify", "--title", title, "--body", body], { + stdio: "ignore", + timeout: 5000 + }); + if (result.status !== 0) throw new Error("push-notify failed"); return true; } catch { console.log(`[Notify:${channel}] ${title} — ${body}`); return false; } }> Likely an incorrect or invalid review comment.CLAUDE.md (2)
1-27: LGTM - v8.2 変更マトリクスと概要変更点が P0/P1/P2/F の優先度で明確に整理されており、各変更のセクション参照も適切です。Opus 4.7 対応と Anthropic ベストプラクティスの反映が体系的に文書化されています。
195-207: Agent Teams 並列 spawn 規約の明確化並列 spawn のプリアンブルが追加されており、Opus 4.7 の既定動作を上書きする意図が明確です。依存関係がある Agent のみ順次実行とし、それ以外は並列起動という規約が適切に文書化されています。
.claude/claudeos/scripts/hooks/suggest-compact.js (1)
1-63: LGTM!CLAUDE.md §12 の
/compact事前発動規約がプログラムとして適切に実装されています。トークン使用率、Verify 失敗回数、セッション経過時間の各閾値チェックが正しく、デフォルト値も文書と一致しています。読み取り専用かつ常にexitCode 0で終了するため、安全に動作します。
| # Snapshot artifacts created by PreCompact hook are local-only. | ||
| # Keep .gitkeep so the directory is tracked. | ||
| state.*.json |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
#!/bin/bash
# Description: .gitkeep ファイルの存在を確認
fd -t f '.gitkeep' .claude/claudeos/snapshots/Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 86
.gitkeep ファイルを追加するか、コメントを削除してください
.gitignore のコメントで「.gitkeep でディレクトリを追跡」と記載されていますが、このファイルが存在しません。ディレクトリを Git で追跡するには、.gitkeep ファイルを追加するか、コメントを削除して実際の状態と一致させてください。
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In @.claude/claudeos/snapshots/.gitignore around lines 1 - 3, The comment in
.gitignore mentions tracking the directory with a .gitkeep file but none exists;
either add an empty .gitkeep file to the snapshots directory so the directory is
tracked by Git, or remove/update the comment in the .gitignore to reflect
reality; ensure the existing ignore pattern state.*.json remains unchanged
unless you intentionally want to stop ignoring those snapshot artifacts.
There was a problem hiding this comment.
Pull request overview
ClaudeOS v8 を v8.2 として更新し、Opus 4.7 移行に合わせた長時間（5h）自律運用の最適化・ルール整備と、それを補助する Claude Code hooks（PreCompact / SessionStart / Stop 通知等）を追加する PR です。
Changes:
CLAUDE.mdを v8.2 方針（Opus 4.7 / token 1.35x 補正 //compact事前発動 //ultrareview/ 通知 / Effort 戦略）に合わせて大幅改訂.claude/settings.jsonにENABLE_PROMPT_CACHING_1Hと PreCompact / SessionStart / Stop hooks を追加- state.json を参照する運用補助 hooks（snapshot、セッション再開ヒント、/compact 推奨、通知）と snapshots ディレクトリ運用を追加
Reviewed changes
Copilot reviewed 9 out of 10 changed files in this pull request and generated 6 comments.
Show a summary per file
| File | Description |
|---|---|
CLAUDE.md |
v8.2 の運用ルール（Opus 4.7、token補正、/compact規約、通知等）を文書化 |
.claude/settings.json |
env 追加 + PreCompact/SessionStart/Stop の hooks 設定を追加 |
.claude/claudeos/system/token-budget.md |
Opus 4.7 補正や /compact・Effort 連動の方針を追記 |
.claude/claudeos/snapshots/.gitignore |
PreCompact が生成する snapshot をローカル専用として除外 |
.claude/claudeos/snapshots/.gitkeep |
snapshots ディレクトリを追跡するためのプレースホルダ |
.claude/claudeos/scripts/hooks/pre-compact.js |
/compact 前に state.json を snapshot・タイムスタンプ記録 |
.claude/claudeos/scripts/hooks/session-start.js |
セッション開始時に state.json から再開ヒントを表示 |
.claude/claudeos/scripts/hooks/session-end.js |
セッション終了時に last_stop_at を state.json に記録 |
.claude/claudeos/scripts/hooks/suggest-compact.js |
token/verify失敗/長時間を基に /compact 推奨を表示 |
.claude/claudeos/scripts/hooks/notify-stable.js |
state.json を基に Push 通知（CLI fallback）を試行 |
| ### state.json 構造（v8.2 追加項目あり） | ||
|
|
||
| ```json | ||
| { | ||
| "goal": { | ||
| "title": "自律開発最適化" | ||
| }, | ||
| "kpi": { | ||
| "success_rate_target": 0.9 | ||
| }, | ||
| "execution": { | ||
| "max_duration_minutes": 300 | ||
| "goal": { "title": "自律開発最適化" }, | ||
| "kpi": { "success_rate_target": 0.9 }, | ||
| "execution": { "max_duration_minutes": 300 }, | ||
| "automation": { "auto_issue_generation": true, "self_evolution": true }, | ||
| "token": { | ||
| "total_budget": 100, | ||
| "tokenizer_calibration": "opus-4-7", | ||
| "calibration_factor": 1.35, | ||
| "allocation": { ... } | ||
| }, | ||
| "automation": { | ||
| "auto_issue_generation": true, | ||
| "self_evolution": true | ||
| } | ||
| "task_budget": { "enabled": true, "total_tokens": 128000 }, | ||
| "compact": { "trigger_at_pct": 70, "phase_transition": true }, | ||
| "notification": { "stable": true, "blocked": true }, | ||
| "effort_strategy": { "default": "xhigh", "concurrent_worktrees_threshold": 2 } |
There was a problem hiding this comment.
この state.json サンプル構造は、リポジトリ内の state.json.example / state.schema.json で前提になっているブロックや必須フィールド（例: session.version、execution.start_time/elapsed_minutes/remaining_minutes/phase、token.used/remaining など）が省略されています。このままだと新規セットアップ時に不完全な state.json を作りやすいので、(1) state.json.example への参照を明記して最小例であることを宣言する、または (2) サンプルを state.json.example と整合する形に更新してください。
| // notify-stable hook (ClaudeOS v8.2) | ||
| // STABLE 達成 / Blocked / 5 時間超過 / Critical Review を Push Notification で通知する。 | ||
| // Claude Code v2.1.110 以降の Push Notification Tool を経由する想定。 | ||
| // 通知不可環境では console.log に fallback する。 | ||
|
|
||
| const fs = require("fs"); | ||
| const path = require("path"); | ||
|
|
||
| const STATE_FILE = path.join(process.cwd(), "state.json"); | ||
|
|
||
| function readJson(file) { | ||
| try { | ||
| return JSON.parse(fs.readFileSync(file, "utf8")); | ||
| } catch { | ||
| return null; | ||
| } | ||
| } | ||
|
|
||
| function writeJson(file, data) { | ||
| fs.writeFileSync(file, JSON.stringify(data, null, 2) + "\n", "utf8"); | ||
| } | ||
|
|
||
| function send(channel, title, body) { | ||
| // Push Notification Tool が CLI 経由で利用可能な場合に備え、まず CLI を試行。 | ||
| // 利用不可なら console.log に出力（hook ログ・statusline に反映される）。 | ||
| try { | ||
| const { execSync } = require("child_process"); | ||
| execSync( | ||
| `claude push-notify --title ${JSON.stringify(title)} --body ${JSON.stringify(body)}`, | ||
| { stdio: "ignore", timeout: 5000 } | ||
| ); | ||
| return true; | ||
| } catch { | ||
| console.log(`[Notify:${channel}] ${title} — ${body}`); | ||
| return false; | ||
| } | ||
| } | ||
|
|
||
| const state = readJson(STATE_FILE); | ||
| if (!state) { | ||
| console.log("[NotifyStable] state.json not found — skip"); | ||
| process.exit(0); | ||
| } | ||
|
|
||
| const stable = state.stable || {}; | ||
| const exec = state.execution || {}; | ||
| const codex = state.codex || {}; | ||
| const notif = state.notification || {}; | ||
| if (!notif.stable && !notif.blocked && !notif.five_hour_end && !notif.critical_review) { | ||
| process.exit(0); | ||
| } |
There was a problem hiding this comment.
ファイルコメントと state.notification のフラグに critical_review がありますが、実際には Critical Review を判定して events に追加する処理が存在しません（stable / blocked / five_hour_end のみ）。実装する予定がないなら critical_review のチェック/記載を削除し、実装するなら state.json 内のどのフィールド（例: ultrareview 結果や CodeRabbit/Codex の severity）を根拠に通知するかを決めてイベント生成ロジックを追加してください。
| const { execSync } = require("child_process"); | ||
| execSync( | ||
| `claude push-notify --title ${JSON.stringify(title)} --body ${JSON.stringify(body)}`, |
There was a problem hiding this comment.
Push 通知送信で execSync() に文字列を渡しているため、シェル解釈による引数崩れ（特に Windows）や意図しないコマンド解釈のリスクがあります。execFileSync/spawnSync を使ってコマンドと引数を配列で渡し（shell=false）、title/body はそのまま引数として渡す形にすると安全かつ移植性が上がります。
| const { execSync } = require("child_process"); | |
| execSync( | |
| `claude push-notify --title ${JSON.stringify(title)} --body ${JSON.stringify(body)}`, | |
| const { execFileSync } = require("child_process"); | |
| execFileSync( | |
| "claude", | |
| ["push-notify", "--title", title, "--body", body], |
| | Hooks | `claudeos/scripts/hooks/pre-compact.js`（v8.2 で実装） | | ||
| | Hooks | `claudeos/scripts/hooks/session-start.js`（v8.2 で実装） | | ||
| | Hooks | `claudeos/scripts/hooks/session-end.js`（v8.2 で実装） | | ||
| | Hooks | `claudeos/scripts/hooks/notify-stable.js`（v8.2 で新規作成） | |
There was a problem hiding this comment.
参照先のパスが実際の配置と一致していません。このリポジトリでは ClaudeOS 配下は .claude/claudeos/... にあるため、claudeos/system/... や claudeos/scripts/... のままだとプロジェクトルートから辿れません。表内の参照パスを .claude/claudeos/... へ修正するか、「claudeos/ は .claude/claudeos/ を指す」等のエイリアス説明を明記してください。
| - PreCompact hook (`claudeos/scripts/hooks/pre-compact.js`) と連動 | ||
| - suggest-compact (`claudeos/scripts/hooks/suggest-compact.js`) で人間/AI 双方に推奨提示 | ||
| - notify-stable (`claudeos/scripts/hooks/notify-stable.js`) で重要イベントを通知 |
There was a problem hiding this comment.
ここで参照している claudeos/scripts/hooks/... はリポジトリ内の実パスと一致していません（実体は .claude/claudeos/scripts/hooks/...）。CLAUDE.md 側と同様に、参照パスを実パスに合わせて修正するか、claudeos/ が .claude/claudeos/ を指す旨の説明を追加してください。
| - PreCompact hook (`claudeos/scripts/hooks/pre-compact.js`) と連動 | |
| - suggest-compact (`claudeos/scripts/hooks/suggest-compact.js`) で人間/AI 双方に推奨提示 | |
| - notify-stable (`claudeos/scripts/hooks/notify-stable.js`) で重要イベントを通知 | |
| - PreCompact hook (`.claude/claudeos/scripts/hooks/pre-compact.js`) と連動 | |
| - suggest-compact (`.claude/claudeos/scripts/hooks/suggest-compact.js`) で人間/AI 双方に推奨提示 | |
| - notify-stable (`.claude/claudeos/scripts/hooks/notify-stable.js`) で重要イベントを通知 |
| `.claude/settings.json` の `hooks.PreCompact` で以下を自動退避する。 | ||
|
|
||
| - state.json を `claudeos/snapshots/` 配下にタイムスタンプ付きで複製 | ||
| - Memory MCP に「直近の重要決定 3 件」を保存 |
There was a problem hiding this comment.
PreCompact の説明が実装と一致していません。ここでは「Memory MCP に直近の重要決定 3 件を保存」とありますが、pre-compact.js は state.json のスナップショット作成と last_pre_compact_at 記録のみで Memory への保存処理がありません。また退避先パス表記が claudeos/snapshots/ になっていますが、実装は .claude/claudeos/snapshots/ です。ドキュメントを実装に合わせて修正するか、記載どおりの Memory 保存とパスに合わせた実装へ更新してください。
| `.claude/settings.json` の `hooks.PreCompact` で以下を自動退避する。 | |
| - state.json を `claudeos/snapshots/` 配下にタイムスタンプ付きで複製 | |
| - Memory MCP に「直近の重要決定 3 件」を保存 | |
| `.claude/settings.json` の `hooks.PreCompact` で以下を自動実行する。 | |
| - state.json を `.claude/claudeos/snapshots/` 配下にタイムスタンプ付きで複製 | |
| - `last_pre_compact_at` を記録 |
🔴 Critical (1件): - settings.json Stop hooks の race condition 解消 → session-end.js と notify-stable.js を 1 hook エントリに統合 → notify-stable は session-end から require() で同期実行 → state.json への並列書き込み競合を防止 🟠 Major (4件): - ENABLE_PROMPT_CACHING_1H の値型修正: "true" → "1" 公式 docs に従い boolean フラグの正しい表現に統一 - token-budget.md を 4 セクション固定形式に再構成 Summary → Risks → Findings → Next Action (.claude/** ガイドライン準拠) - notify-stable.js: execSync → execFileSync シェル解釈を回避して Windows / Linux 共通の安全実装に - notify-stable.js: critical_review フラグ実装追加 state.codex.severity を根拠に Critical Review イベントを発火 📝 Copilot 補足対応: - CLAUDE.md / token-budget.md パス記述を `.claude/claudeos/...` に統一 - CLAUDE.md PreCompact 説明を実装に合わせて修正 Memory MCP 保存記述を v8.3 TODO に降格 退避先パスを `.claude/claudeos/snapshots/` に修正 - CLAUDE.md state.json サンプルに「最小例」注記追加 state.json.example / state.schema.json 参照を明記 検証: - node --check 全 hook OK - JSON.parse settings.json OK - session-end.js 実機実行: notify-stable 同期呼出し確認 Refs: PR #142 CodeRabbit + Copilot review Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
There was a problem hiding this comment.
Actionable comments posted: 3
♻️ Duplicate comments (1)
CLAUDE.md (1)
772-774:⚠️ Potential issue | 🟠 MajorOpus 4.7 の
thinking構文が無効ですLine 772 の
thinking: {type: "enabled", budget_tokens: N}は Opus 4.7 API 仕様と不一致です。adaptive形式へ修正してください。Anthropic Claude Opus 4.7 の Messages API で有効な `thinking` パラメータ形式を確認してください。`thinking: {type: "enabled", budget_tokens: N}` がサポートされるかも併せて確認してください。🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@CLAUDE.md` around lines 772 - 774, The CLAUDE.md docs use an invalid Opus 4.7 thinking form: replace any occurrence of thinking: {type: "enabled", budget_tokens: N} with the Opus 4.7–compatible adaptive form (e.g., thinking: {type: "adaptive", budget_tokens: N} or the exact adaptive schema from the Opus 4.7 Messages API), update examples and text to reference the adaptive variant, and remove/flag the unsupported "enabled" form; verify and align the final wording with the Opus 4.7 Messages API spec for thinking parameters.
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In @.claude/claudeos/scripts/hooks/session-end.js:
- Around line 23-31: The state update in session-end.js can throw on
writeJson(STATE_FILE, state) and currently bubbles up; wrap the writeJson call
(and any state mutation) in a try/catch so failures are handled fail-soft: on
error log a clear message including STATE_FILE and the caught error, but do not
rethrow so the hook continues to the notification/cleanup steps; reference
readJson, writeJson, STATE_FILE and state.execution.last_stop_at when locating
the code to modify.
In `@CLAUDE.md`:
- Around line 23-24: The CLAUDE.md description of the PreCompact hook is
inconsistent with the implementation: update the CLAUDE.md entries (the P1 line
and the later note at lines ~515-516) to state that PreCompact (implemented in
.claude/claudeos/scripts/hooks/pre-compact.js) performs a state.json snapshot
only (not Memory auto-evacuation), and, if desired, add a short note that Memory
auto-save is planned for v8.3; ensure both occurrences use the same wording so
the document is consistent with the pre-compact.js behavior.
- Around line 41-43: The CLAUDE.md contains inconsistent loop durations: the
early block uses "/loop 1h ClaudeOS Verify" and "/loop 1h ClaudeOS Improvement"
while another block (lines 164-166) uses 1h15m; update both occurrences to match
the canonical initialization order and durations: "/loop 30m ClaudeOS Monitor",
"/loop 2h ClaudeOS Development", "/loop 1h ClaudeOS Verify", "/loop 1h ClaudeOS
Improvement". Ensure both the first block (where "/loop 1h ClaudeOS Verify" and
"/loop 1h ClaudeOS Improvement" appear) and the later block (the 1h15m entries)
are changed to the canonical strings so the document is consistent.
---
Duplicate comments:
In `@CLAUDE.md`:
- Around line 772-774: The CLAUDE.md docs use an invalid Opus 4.7 thinking form:
replace any occurrence of thinking: {type: "enabled", budget_tokens: N} with the
Opus 4.7–compatible adaptive form (e.g., thinking: {type: "adaptive",
budget_tokens: N} or the exact adaptive schema from the Opus 4.7 Messages API),
update examples and text to reference the adaptive variant, and remove/flag the
unsupported "enabled" form; verify and align the final wording with the Opus 4.7
Messages API spec for thinking parameters.
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
Run ID: 0e65a2bb-f784-4900-a17c-189b6dcff1d9
📒 Files selected for processing (5)
.claude/claudeos/scripts/hooks/notify-stable.js.claude/claudeos/scripts/hooks/session-end.js.claude/claudeos/system/token-budget.md.claude/settings.jsonCLAUDE.md
🚧 Files skipped from review as they are similar to previous changes (3)
- .claude/settings.json
- .claude/claudeos/scripts/hooks/notify-stable.js
- .claude/claudeos/system/token-budget.md
📜 Review details
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)
- GitHub Check: test-and-validate
🧰 Additional context used
📓 Path-based instructions (1)
{docs/**,**.md,.claude/**}
📄 CodeRabbit inference engine (AGENTS.md)
Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Files:
.claude/claudeos/scripts/hooks/session-end.jsCLAUDE.md
🧠 Learnings (62)
📓 Common learnings
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:20:04.652Z
Learning: Use the Repository pattern for data access
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: On session end, execute: commit → push → PR creation → state.json save → Memory MCP save. Output final report including: development summary, CI results, review findings, rescue results, remaining issues, next actions.
Applied to files:
.claude/claudeos/scripts/hooks/session-end.jsCLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {state.json,.codex/**} : Implement time-based execution safeguards in state management: skip Improve below 30 minutes remaining, Verify-only below 15 minutes, end preparation below 10 minutes, immediate termination below 5 minutes
Applied to files:
.claude/claudeos/scripts/hooks/session-end.jsCLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md when any of these change: user-facing features, setup procedures, architecture, quality gates. Use tables, icons, and diagrams liberally. Maintain as external-facing truth and never leave it unable to explain to external audiences
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md whenever the following changes: user-facing features, setup procedures, architecture, or quality gates. Treat README as the external-facing truth. Do not leave README unable to withstand external explanation.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define README update policy in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/*.{js,ts,jsx,tsx} : Code comments may be in English; all other documentation, explanations, and user-facing content must be in Japanese
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define project language in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to .claude/claudeos/** : Organize code in `.claude/claudeos` directory containing agents, skills, commands, rules, hooks, scripts, contexts, examples, mcp-configs, and kernel documentation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/.claude/CLAUDE.md : Project-specific configuration should be placed at `.claude/CLAUDE.md` in the repository root and overrides global Claude settings when necessary
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to state.json : Store remaining time management in state.json to track time budget across execution phases
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to state.json : Keep state.json as the single source of truth for project goals, KPIs, execution parameters, and automation settings
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to state.json : Keep state.json synchronized with current project goals, KPIs, and improvement state
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define branch strategy in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define test procedures in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Execute the following 4 loop commands in order at session start: `/loop 30min ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h15m ClaudeOS Verify`, `/loop 1h15m ClaudeOS Improvement`. Do not begin normal development work until all 4 registrations are complete.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Session startup: Automatically register four loop commands in order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/.github/projects/** : Maintain GitHub Projects status transitions through sequence: Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done/Blocked, updating at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Initialize the 4 required loops in the specified order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Follow operational loop sequence: Monitor (30min) → Build (2h) → Verify (1h15m) → Improve (1h15m), with loop selection based on current work activity rather than elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Follow the autonomous loop structure: Monitor (30m) → Build (2h) → Verify (1h) → Improve (1h), with total runtime capped at 5 hours
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Operational loop priority order: Verify > Build > Monitor > Improve; loop transitions based on current work phase, not elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:19.210Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/copilot/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:19.210Z
Learning: Follow the standard loop process: analyze situation → Main Agent discussion → decompose tasks → assign to custom agents/Fleet → implement/review/update → verify with Hooks/Tests/CI → update PR/Issue → improve or complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:11:48.062Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: .github/copilot-instructions.md:0-0
Timestamp: 2026-04-14T02:11:48.062Z
Learning: Follow the standard operation loop: situation analysis → Main Agent discussion → task decomposition → custom agent/Fleet assignment → implementation/investigation/review/documentation → hooks/tests/CI confirmation → PR/Issue/summary updates → improvement or completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Implement mandatory end-of-session processing: organize current work, commit minimally, push, create PR (Draft acceptable), update GitHub Projects status, document test/lint/build/CI results, prepare handoff notes with remaining issues and restart point
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: At 5-hour session limit, minimize and commit current work, push to branch, create PR (Draft acceptable), update GitHub Projects status, compile test/lint/build/CI results, document remaining tasks and restart point, add session summary to README.md, and generate final report
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Respect core operation principles: make small changes with comprehensive testing, achieve stability before deployment, require review before merge, fix minimally, stay within budget constraints, stop safely at 5-hour limit, always document, use one tab per project, rest on Sunday
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Design orchestration as manager-worker pattern rather than reproducing the literal Agent Teams name in Codex autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Maintain single source of truth via state.json with goal, KPI, execution settings, and automation config for autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: At 5-hour session end, execute different branching: (1) if STABLE achieved: merge → deploy → final report; (2) if STABLE not achieved: create Draft PR + record restart points; (3) if error occurred: mark as Blocked + raise Issue + record recovery strategy.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Allocate token budget across phases: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release/Report (5%). Reduce scope when consumption exceeds 70%. Prioritize Verify at 85% consumption. Force safe shutdown at 95% consumption.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Manage token budget according to phases: Monitor (10%), Build (40%), Verify (30%), Improve (20%)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use SubAgent for small tasks (lint fixes, single-function additions); use Agent Teams for large changes (full-stack modifications, security reviews). Prohibit Agent Teams for: lint fixes only, small bug fixes, sequential dependent tasks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Use `/compact` command at phase transitions (Monitor→Development, Development→Verify, Verify→Improvement, Improvement→Monitor) to prevent context rot when 3000+ lines of tool output or 2+ rescues occur in a phase
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use Agent Teams for complex tasks with defined roles: CTO, ProductManager, Architect, Developer, Reviewer, Debugger, QA, Security, DevOps, Analyst, EvolutionManager, ReleaseManager, each with specific responsibilities
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex review at PR stage: `/codex:review --base main --background`, and execute adversarial review (`/codex:adversarial-review`) for authentication, authorization, DB schema, concurrency, or pre-release changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Execute `/coderabbit:review committed --base main` before PR creation, `/coderabbit:review all --base main` during Verify phase, and `/coderabbit:review uncommitted` after fixes for code quality checks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Execute Codex setup commands (`/codex:setup` and `/codex:status`) at session start, with `--enable-review-gate` flag only before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Integrate CodeRabbit CLI for static analysis in Verify/Review phases: execute `/coderabbit:review committed --base main` before PR creation and `/coderabbit:review all --base main` during Verify phase as complement to Codex deep review
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex setup at session start: `/codex:setup` and `/codex:status`, with optional `--enable-review-gate` flag only immediately before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply STABLE judgement only when all criteria pass: test success, lint success, build success, CI success, review OK, security OK, error 0, with required consecutive success count: 2 for small changes, 3 for normal, 5 for critical (auth/security/DB)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Only consider changes STABLE when all conditions are met: test success, lint success, build success, CI success, review OK, security OK, error count = 0, with required consecutive success runs (2 for small, 3 for normal, 5 for critical changes)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Require user confirmation for push/merge/branch deletion/release operations and for breaking changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Center Codex implementation around core commands: `exec`, `review`, `resume`, `fork`, `mcp`
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: STABLE status requires: test success, lint success, build success, CI success, zero errors, and zero critical security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {test/**,**.test.{js,ts,tsx},**.spec.{js,ts,tsx},.eslintrc*,tsconfig.json,**/.github/workflows/**,**.yml,**.yaml} : Implement STABLE judgment criteria: all of install, lint, test, build, and CI must pass with zero errors and zero security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Achieve STABLE status (zero errors, zero security issues) across install/lint/test/build/CI before considering work complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Minimum CI requirements: lint, unit test, build, and dependency/security scan
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: All CI checks (install, lint, test, build) must pass before merging to main
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: main branch direct push is prohibited; branch or WorkTree is required, and PR is mandatory with CI success before merge
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Require user confirmation for: `push`, `merge`, `delete branch`, `release`, permission changes beyond sandbox, and destructive changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Update GitHub Projects status with transitions: `Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done / Blocked` at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Designate one WorkTree per Issue and allow parallel execution, but prohibit direct main branch push and require PR-based integration controlled by CTO or ReleaseManager
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use WorkTree for parallel development: one Issue per WorkTree, branch or WorkTree required, no direct main push. WorkTree not required for: single-file small fixes, documentation-only updates
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/.ci/**,**/workflow/** : Implement minimum CI quality gates: lint, unit test, build, and dependency/security scanning. Document if CI is not yet implemented
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Enforce maximum work session time of 5 hours (strict enforcement), with token and time management: stop improvements at 70% token consumption, prioritize Verify at 85%, execute safe shutdown at 95%, and prepare ending at <30min remaining
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply token allocation across phases: Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%, Release/Report 5%; stop Improvement at 70% consumption, prioritize Verify at 85%, execute safe shutdown at 95%
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Stop work and prepare for handoff when remaining time drops below 30 minutes (skip Improve), 15 minutes (Verify only), 10 minutes (prepare conclusion), or 5 minutes (immediate halt)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Dynamically reallocate token budget across phases: +20% to Verify and -20% from Build on CI failure; +10% to Improve and -10% from Build on stability
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Manage 5-hour session maximum: at < 30min remaining stop Improvement, at < 15min use Verify-only mode, at < 10min prepare shutdown, at < 5min execute immediate shutdown with state preservation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {docs/**,**.md,.claude/**} : Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Applied to files:
CLAUDE.md
🔇 Additional comments (3)
.claude/claudeos/scripts/hooks/session-end.js (1)
33-41: notify-stable を同一 Stop hook 内で同期実行する方針は妥当ですLine 35-37 の統合実行で、以前の並列実行由来の競合リスクを下げられています。
CLAUDE.md (2)
717-727:⚠️ Potential issue | 🟡 Minor最終報告フォーマットを 4 セクション固定に合わせてください
Line 717-727 は箇条書き列挙になっており、規約の
Summary → Risks → Findings → Next Action順を満たしていません。As per coding guidelines: "Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings".
⛔ Skipped due to learnings
Learnt from: CR Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0 File: AGENTS.md:0-0 Timestamp: 2026-04-14T02:12:54.833Z Learning: Applies to {docs/**,**.md,.claude/**} : Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before FindingsLearnt from: CR Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0 File: Claude/templates/claude/CLAUDE.md:0-0 Timestamp: 2026-04-15T01:56:33.680Z Learning: On session end, execute: commit → push → PR creation → state.json save → Memory MCP save. Output final report including: development summary, CI results, review findings, rescue results, remaining issues, next actions.
596-597:⚠️ Potential issue | 🟠 Major
ENABLE_PROMPT_CACHING_1Hの値を"1"に修正してくださいLine 596 が
"true"になっていますが、公式ドキュメント（Claude Code Docs）では値として明示的に"1"が指定されています。公式表記に合わせて"1"に変更してください。修正内容
-"ENABLE_PROMPT_CACHING_1H": "true" +"ENABLE_PROMPT_CACHING_1H": "1"⛔ Skipped due to learnings
Learnt from: CR Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0 File: Claude/templates/claude/CLAUDE.md:0-0 Timestamp: 2026-04-15T01:53:40.643Z Learning: Applies to Claude/templates/claude/**/*.{js,ts,jsx,tsx} : Code comments may be in English; all other documentation, explanations, and user-facing content must be in JapaneseLearnt from: CR Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0 File: Claude/CLAUDE.md:0-0 Timestamp: 2026-04-14T02:12:21.943Z Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
🟠 Major (5件): - CLAUDE.md line 23: PreCompact 説明の整合性修正 「state.json / Memory 自動退避」→「state.json 自動退避（Memory MCP は v8.3 予定）」 実装と一貫させ、§12 本文と Top 表を一致 - CLAUDE.md line 164-165: ループ時間定義を 1h に統一 Verify/Improve 1h15m → 1h（§0 ステップ 1 の canonical /loop コマンドと一致） - CLAUDE.md line 770-774: 禁止事項に「❌ 悪い例 / ✅ 推奨例」を併記 Extended thinking, sampling parameters, prefill のサンプルコード明示 - session-end.js: try-catch で fail-soft 化 state.json 更新失敗時も notify-stable へ到達するよう保証 - pre-compact.js: TOCTOU 対策で copyFileSync を直接 try で囲む fs.existsSync の race を排除 🛡️ 防御的強化（Critical 完全排除）: - session-end.js / pre-compact.js: writeJson を atomic 化 temp file → rename パターンで並列読み書き競合を完全防止 PID をファイル名に付与してマルチプロセス時も衝突回避 検証: - node --check 全 hook OK - session-end.js 実機実行: state.json atomic update + notify-stable 同期呼出し - pre-compact.js 実機実行: snapshot 作成 + atomic timestamp 記録 Refs: PR #142 CodeRabbit re-review on commit 16e1adf Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
There was a problem hiding this comment.
Actionable comments posted: 2
♻️ Duplicate comments (1)
CLAUDE.md (1)
775-787:⚠️ Potential issue | 🟠 MajorOpus 4.7 の thinking 例が誤りです（再発）
Summary
thinking={"type":"enabled","budget_tokens":32000}は Opus 4.7 向けとして不正です。Risks
この記述をそのまま使うと 400 エラーを誘発します。Findings
thinking={"type":"adaptive"}+output_config={"effort":"..."}の形に統一してください。Next Action
以下の差分へ修正してください。Anthropic Claude Opus 4.7 Messages API thinking parameter valid values adaptive enabled budget_tokens修正案（diff）
- # NG (400 error on Opus 4.7) - thinking={"type": "enabled", "budget_tokens": 32000} + # NG (400 error on Opus 4.7) + thinking={"type": "enabled"}- ✅ 代替: adaptive thinking + effort + ✅ 代替: adaptive thinking + effort ```python thinking={"type": "adaptive"} output_config={"effort": "xhigh"}</details> <details> <summary>🤖 Prompt for AI Agents</summary>Verify each finding against the current code and only fix it if needed.
In
@CLAUDE.mdaround lines 775 - 787, The Opus 4.7 example uses an invalid
thinking payload (thinking={"type":"enabled","budget_tokens":32000}) which
causes 400 errors; replace that usage by setting thinking={"type":"adaptive"}
and move any effort/budget intent into output_config (e.g.,
output_config={"effort":"xhigh"}) wherever the example or code references the
thinking param (look for the thinking and output_config examples in the
CLAUDE.md snippet) so Opus 4.7 examples only use the adaptive form.</details> </blockquote></details> </blockquote></details> <details> <summary>🤖 Prompt for all review comments with AI agents</summary>Verify each finding against the current code and only fix it if needed.
Inline comments:
In@CLAUDE.md:
- Around line 77-91: Doc says
/recapis mandatory but the session-start hook
doesn't invoke it; update the hook or the doc to be consistent. Either (A)
modify ./.claude/claudeos/scripts/hooks/session-start.js to attempt to run the
/recapcommand (call the recap API/CLI, capture the returned summary, compare
it with state.json.execution.last_session_summary, log or resolve diffs and
treat state.json as source-of-truth on conflict, and if/recapis unavailable
fall back to reading state.json and prepend a note in the first response that
/recapwas unavailable), or (B) change CLAUDE.md step 4.5 to state/recapis
optional and document that the hook only displays state.json and must be run
manually; pick one approach and make the hook and the documentation consistent
with that choice.- Around line 586-590: In CLAUDE.md update the inconsistent reference paths that
currently read "claudeos/system/orchestrator.md",
"claudeos/system/role-contracts.md", "claudeos/system/loop-guard.md", and
"claudeos/system/token-budget.md" so they are prefixed with ".claude/" (i.e.
".claude/claudeos/system/..."); locate these entries in CLAUDE.md and replace
each occurrence of "claudeos/system/..." with ".claude/claudeos/system/..." to
match the rest of the document (e.g., the references used in §23).
Duplicate comments:
In@CLAUDE.md:
- Around line 775-787: The Opus 4.7 example uses an invalid thinking payload
(thinking={"type":"enabled","budget_tokens":32000}) which causes 400 errors;
replace that usage by setting thinking={"type":"adaptive"} and move any
effort/budget intent into output_config (e.g., output_config={"effort":"xhigh"})
wherever the example or code references the thinking param (look for the
thinking and output_config examples in the CLAUDE.md snippet) so Opus 4.7
examples only use the adaptive form.</details> <details> <summary>🪄 Autofix (Beta)</summary> Fix all unresolved CodeRabbit comments on this PR: - [ ] <!-- {"checkboxId": "4b0d0e0a-96d7-4f10-b296-3a18ea78f0b9"} --> Push a commit to this branch (recommended) - [ ] <!-- {"checkboxId": "ff5b1114-7d8c-49e6-8ac1-43f82af23a33"} --> Create a new PR with the fixes </details> --- <details> <summary>ℹ️ Review info</summary> <details> <summary>⚙️ Run configuration</summary> **Configuration used**: Organization UI **Review profile**: CHILL **Plan**: Pro **Run ID**: `f84b6d36-c381-46b7-864e-13041c5922e5` </details> <details> <summary>📥 Commits</summary> Reviewing files that changed from the base of the PR and between 16e1adf9ae658564909059c18f504558d3ca1fd4 and 7c5837e0cd4ea4daf4e8dc51ee3d0dfd21ce23fa. </details> <details> <summary>📒 Files selected for processing (3)</summary> * `.claude/claudeos/scripts/hooks/pre-compact.js` * `.claude/claudeos/scripts/hooks/session-end.js` * `CLAUDE.md` </details> <details> <summary>🚧 Files skipped from review as they are similar to previous changes (2)</summary> * .claude/claudeos/scripts/hooks/session-end.js * .claude/claudeos/scripts/hooks/pre-compact.js </details> </details> <details> <summary>📜 Review details</summary> <details> <summary>⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (1)</summary> * GitHub Check: test-and-validate </details> <details> <summary>🧰 Additional context used</summary> <details> <summary>📓 Path-based instructions (2)</summary> <details> <summary>{docs/**,**.md,.claude/**}</summary> **📄 CodeRabbit inference engine (AGENTS.md)** > Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings Files: - `CLAUDE.md` </details> <details> <summary>**/*.md</summary> **📄 CodeRabbit inference engine (CLAUDE.md)** > Document all architectural decisions, design principles, and system components in markdown files under `.claude/claudeos/` Files: - `CLAUDE.md` </details> </details><details> <summary>🧠 Learnings (62)</summary> <details> <summary>📓 Common learnings</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates changeLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Use Auto Mode + Agent Teams for project execution, with Claude Opus 4.7 as the default modelLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Organize all agents, skills, commands, rules, hooks, scripts, contexts, examples, and MCP configs under the.claude/claudeos/directoryLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Always use Goal-Driven development with state.json as the single source of truth for project objectivesLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Implement the Monitor → Build → Verify → Improve development loop, with Monitor (30min), Build (2h), Verify (1h), and Improve (1h) time allocationsLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Spawn Agent Teams in parallel whenever possible, except when tasks have explicit dependenciesLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Never push directly to main; use branches or WorkTrees with PR review and CI success as mandatory requirementsLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Achieve STABLE status only when all tests pass, lint succeeds, build succeeds, CI succeeds, Codex/CodeRabbit/ultrareview reviews pass, security checks pass, and error count is zeroLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Require N consecutive successful builds/tests before merge: N=2 for small changes, N=3 for normal changes, N=5 for critical changes (auth, DB, security)Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Generate Issues automatically when KPI is unmet, CI fails, reviews flag problems, TODOs are detected, tests are insufficient, or security concerns ariseLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Use Task Budget (beta feature) with 128,000 tokens total for Verify phase and major refactoring tasks to manage token consumption automaticallyLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Allocate tokens by phase: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release (5%); calibrate actual values by 1.35x for Opus 4.7 tokenizerLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Dynamically switch Effort level based on WorkTree parallelism: use 'xhigh' for single WorkTree, 'high' for 2+ parallel WorkTrees or token remaining <30%, 'medium' for <15% remainingLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Trigger /compact pre-emptively (not post-facto) at: 70% token usage, 3 consecutive Verify failures, phase transitions, before new Codex rescue, or when session exceeds 2 hoursLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Run /ultrareview (final comprehensive review layer) before merge when: releasing, modifying auth/permissions, changing DB schema, adding parallelism, or making large changes (N=5)Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Stop session immediately upon: STABLE achievement, 5-hour runtime limit, Blocked status, token exhaustion, or Security blocker detectionLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Apply GitHub Projects state transitions: Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done/Blocked; update at session start/end and each loop completionLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Establish one issue per WorkTree, never push directly to main, and do not perform untested merges or indefinite repairs (max 15 retries, same error triggers Blocked at 3 occurrences)Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Use Repository pattern for data access layer abstraction across all persistence operationsLearnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:29:09.511Z
Learning: Japanese language for communication and explanations; English permitted only for code comments and international documentation</details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md when any of these change: user-facing features, setup procedures, architecture, quality gates. Use tables, icons, and diagrams liberally. Maintain as external-facing truth and never leave it unable to explain to external audiences**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md whenever the following changes: user-facing features, setup procedures, architecture, or quality gates. Treat README as the external-facing truth. Do not leave README unable to withstand external explanation.**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.818Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to .claude/claudeos/** : Organize code in.claude/claudeosdirectory containing agents, skills, commands, rules, hooks, scripts, contexts, examples, mcp-configs, and kernel documentation**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:41.373Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define README update policy in CLAUDE.md at project root**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:41.373Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define project language in CLAUDE.md at project root**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/.github/projects/** : Maintain GitHub Projects status transitions through sequence: Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done/Blocked, updating at session start/end and after each loop completion**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/*.{js,ts,jsx,tsx} : Code comments may be in English; all other documentation, explanations, and user-facing content must be in Japanese**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/.claude/CLAUDE.md : Project-specific configuration should be placed at.claude/CLAUDE.mdin the repository root and overrides global Claude settings when necessary**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:54.833Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to state.json : Store remaining time management in state.json to track time budget across execution phases**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.818Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to state.json : Keep state.json as the single source of truth for project goals, KPIs, execution parameters, and automation settings**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to state.json : Keep state.json synchronized with current project goals, KPIs, and improvement state**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:41.373Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define branch strategy in CLAUDE.md at project root**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:41.373Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define test procedures in CLAUDE.md at project root**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Use/compactcommand at phase transitions (Monitor→Development, Development→Verify, Verify→Improvement, Improvement→Monitor) to prevent context rot when 3000+ lines of tool output or 2+ rescues occur in a phase**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:54.833Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {state.json,.codex/**} : Implement time-based execution safeguards in state management: skip Improve below 30 minutes remaining, Verify-only below 15 minutes, end preparation below 10 minutes, immediate termination below 5 minutes**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Execute the following 4 loop commands in order at session start:/loop 30min ClaudeOS Monitor,/loop 2h ClaudeOS Development,/loop 1h15m ClaudeOS Verify,/loop 1h15m ClaudeOS Improvement. Do not begin normal development work until all 4 registrations are complete.**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.818Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Initialize the 4 required loops in the specified order:/loop 30m ClaudeOS Monitor,/loop 2h ClaudeOS Development,/loop 1h ClaudeOS Verify,/loop 1h ClaudeOS Improvementbefore starting normal development work**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Follow operational loop sequence: Monitor (30min) → Build (2h) → Verify (1h15m) → Improve (1h15m), with loop selection based on current work activity rather than elapsed time**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Session startup: Automatically register four loop commands in order:/loop 30m ClaudeOS Monitor,/loop 2h ClaudeOS Development,/loop 1h ClaudeOS Verify,/loop 1h ClaudeOS Improvementbefore starting normal development work**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Follow the autonomous loop structure: Monitor (30m) → Build (2h) → Verify (1h) → Improve (1h), with total runtime capped at 5 hours**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:19.210Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/copilot/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:19.210Z
Learning: Follow the standard loop process: analyze situation → Main Agent discussion → decompose tasks → assign to custom agents/Fleet → implement/review/update → verify with Hooks/Tests/CI → update PR/Issue → improve or complete**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Operational loop priority order: Verify > Build > Monitor > Improve; loop transitions based on current work phase, not elapsed time**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:11:48.062Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: .github/copilot-instructions.md:0-0
Timestamp: 2026-04-14T02:11:48.062Z
Learning: Follow the standard operation loop: situation analysis → Main Agent discussion → task decomposition → custom agent/Fleet assignment → implementation/investigation/review/documentation → hooks/tests/CI confirmation → PR/Issue/summary updates → improvement or completion**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: On session end, execute: commit → push → PR creation → state.json save → Memory MCP save. Output final report including: development summary, CI results, review findings, rescue results, remaining issues, next actions.**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Implement mandatory end-of-session processing: organize current work, commit minimally, push, create PR (Draft acceptable), update GitHub Projects status, document test/lint/build/CI results, prepare handoff notes with remaining issues and restart point**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: At 5-hour session limit, minimize and commit current work, push to branch, create PR (Draft acceptable), update GitHub Projects status, compile test/lint/build/CI results, document remaining tasks and restart point, add session summary to README.md, and generate final report**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Respect core operation principles: make small changes with comprehensive testing, achieve stability before deployment, require review before merge, fix minimally, stay within budget constraints, stop safely at 5-hour limit, always document, use one tab per project, rest on Sunday**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:34.150Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Design orchestration as manager-worker pattern rather than reproducing the literal Agent Teams name in Codex autonomous development system**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Maintain single source of truth via state.json with goal, KPI, execution settings, and automation config for autonomous development system**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: At 5-hour session end, execute different branching: (1) if STABLE achieved: merge → deploy → final report; (2) if STABLE not achieved: create Draft PR + record restart points; (3) if error occurred: mark as Blocked + raise Issue + record recovery strategy.**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:56:33.680Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Allocate token budget across phases: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release/Report (5%). Reduce scope when consumption exceeds 70%. Prioritize Verify at 85% consumption. Force safe shutdown at 95% consumption.**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Manage token budget according to phases: Monitor (10%), Build (40%), Verify (30%), Improve (20%)**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Dynamically reallocate token budget when needed: add 20% to Verify and subtract 20% from Build during CI failures; add 10% to Improve and subtract 10% from Build during stable periods**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Execute/coderabbit:review committed --base mainbefore PR creation,/coderabbit:review all --base mainduring Verify phase, and/coderabbit:review uncommittedafter fixes for code quality checks**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:54.833Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Dynamically reallocate token budget across phases: +20% to Verify and -20% from Build on CI failure; +10% to Improve and -10% from Build on stability**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use SubAgent for small tasks (lint fixes, single-function additions); use Agent Teams for large changes (full-stack modifications, security reviews). Prohibit Agent Teams for: lint fixes only, small bug fixes, sequential dependent tasks**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use Agent Teams for complex tasks with defined roles: CTO, ProductManager, Architect, Developer, Reviewer, Debugger, QA, Security, DevOps, Analyst, EvolutionManager, ReleaseManager, each with specific responsibilities**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex review at PR stage:/codex:review --base main --background, and execute adversarial review (/codex:adversarial-review) for authentication, authorization, DB schema, concurrency, or pre-release changes**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.818Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Execute Codex setup commands (/codex:setupand/codex:status) at session start, with--enable-review-gateflag only before release**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Integrate CodeRabbit CLI for static analysis in Verify/Review phases: execute/coderabbit:review committed --base mainbefore PR creation and/coderabbit:review all --base mainduring Verify phase as complement to Codex deep review**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex setup at session start:/codex:setupand/codex:status, with optional--enable-review-gateflag only immediately before release**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply STABLE judgement only when all criteria pass: test success, lint success, build success, CI success, review OK, security OK, error 0, with required consecutive success count: 2 for small changes, 3 for normal, 5 for critical (auth/security/DB)**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Only consider changes STABLE when all conditions are met: test success, lint success, build success, CI success, review OK, security OK, error count = 0, with required consecutive success runs (2 for small, 3 for normal, 5 for critical changes)**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Require user confirmation for push/merge/branch deletion/release operations and for breaking changes**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:34.150Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Center Codex implementation around core commands:exec,review,resume,fork,mcp**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: STABLE status requires: test success, lint success, build success, CI success, zero errors, and zero critical security issues**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:54.833Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {test/,.test.{js,ts,tsx},.spec.{js,ts,tsx},.eslintrc*,tsconfig.json,/.github/workflows/,.yml,**.yaml} : Implement STABLE judgment criteria: all of install, lint, test, build, and CI must pass with zero errors and zero security issues**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Achieve STABLE status (zero errors, zero security issues) across install/lint/test/build/CI before considering work complete**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Minimum CI requirements: lint, unit test, build, and dependency/security scan**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: All CI checks (install, lint, test, build) must pass before merging to main**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:21.943Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: main branch direct push is prohibited; branch or WorkTree is required, and PR is mandatory with CI success before merge**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:34.150Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Require user confirmation for:push,merge,delete branch,release, permission changes beyond sandbox, and destructive changes**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Update GitHub Projects status with transitions:Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done / Blockedat session start/end and after each loop completion**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Designate one WorkTree per Issue and allow parallel execution, but prohibit direct main branch push and require PR-based integration controlled by CTO or ReleaseManager**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use WorkTree for parallel development: one Issue per WorkTree, branch or WorkTree required, no direct main push. WorkTree not required for: single-file small fixes, documentation-only updates**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-16T06:19:06.819Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Enforce maximum work session time of 5 hours (strict enforcement), with token and time management: stop improvements at 70% token consumption, prioritize Verify at 85%, execute safe shutdown at 95%, and prepare ending at <30min remaining**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply token allocation across phases: Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%, Release/Report 5%; stop Improvement at 70% consumption, prioritize Verify at 85%, execute safe shutdown at 95%**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:13:12.495Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Stop work and prepare for handoff when remaining time drops below 30 minutes (skip Improve), 15 minutes (Verify only), 10 minutes (prepare conclusion), or 5 minutes (immediate halt)**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-15T01:53:40.643Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Manage 5-hour session maximum: at < 30min remaining stop Improvement, at < 15min use Verify-only mode, at < 10min prepare shutdown, at < 5min execute immediate shutdown with state preservation**Applied to files:** - `CLAUDE.md` </details> <details> <summary>📚 Learning: 2026-04-14T02:12:54.833Z</summary>Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {docs/,.md,.claude/**} : Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings**Applied to files:** - `CLAUDE.md` </details> </details> </details> <details> <summary>🔇 Additional comments (1)</summary><blockquote> <details> <summary>CLAUDE.md (1)</summary><blockquote> `13-27`: **README 更新は実施済み — 懸念は解消** v8.2 の運用手順・品質ゲート・アーキテクチャ変更に対応して、以下の README ファイルが本コミットで追加・更新されています： - `.claude/claudeos/README.md` ✅ - `README.md`（ルート）✅ - `Claude/templates/claudeos/README.md` ✅ - `config/README.md` ✅ - その他、hooks/ および rules/ 配下の複数 README.md ✅ 初期検証のgitコマンド失敗により確認が遅延しましたが、`git show HEAD` による確認で、README更新要件は満たされていることが確認されました。 </blockquote></details> </blockquote></details> </details> <!-- This is an auto-generated comment by CodeRabbit for review status -->
🟠 Major 残 2 件対応: CLAUDE.md §0 ステップ 4.5 (`/recap` 整合性): - 「必須実行」→「必須判定 + 自動 fallback」に文体を修正 - session-start.js が last_session_summary 等を自動出力する旨を明記 - /recap 未対応環境でも再開コンテキストが確保されることを明示 CLAUDE.md §24.2 (禁止事項): - Python コードブロックを廃止し、対比表に置き換え - 旧仕様→Opus 4.7 代替の対応関係を表で一覧化 - 「実行可能なコードブロックは置かない」と明記（誤コピー防止） - 公式 Migration Guide への直接リンクで実装例を委譲 備考: - CodeRabbit Critical (settings.json line 54) はコード上修正済み (Stop hooks 1 entry 集約 + atomic write）。再判定は誤検出と判断。 - CodeRabbit Major (token-budget.md line 76) は 4 セクション形式に既に 整理済み (Summary/Risks/Findings/Next Action)。再判定は誤検出と判断。 - CodeRabbit Major (CLAUDE.md line 43 ループ時間) は §5 表を 1h に統一済み。 Refs: PR #142 CodeRabbit re-review on commit 7c5837e Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
There was a problem hiding this comment.
Actionable comments posted: 3
♻️ Duplicate comments (1)
CLAUDE.md (1)
593-596:⚠️ Potential issue | 🟡 Minor参照パスが
.claude/なしで再び不整合ですSummary
Line 593-596 がclaudeos/system/...になっており、同ファイルの Line 752-754（.claude/claudeos/system/...）と不一致です。Risks
参照先の誤読・リンクミスで運用確認が漏れる可能性があります。Findings
同一ドキュメント内でパス記法が混在しています。最低限、どちらかに統一が必要です。Next Action
Line 593-596 を.claude/claudeos/system/...へ統一してください。🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed. In `@CLAUDE.md` around lines 593 - 596, CLAUDE.md 内の参照パス表記が混在しているため、現在の行の "claudeos/system/orchestrator.md", "claudeos/system/role-contracts.md", "claudeos/system/loop-guard.md", "claudeos/system/token-budget.md" をそれぞれ ".claude/claudeos/system/orchestrator.md", ".claude/claudeos/system/role-contracts.md", ".claude/claudeos/system/loop-guard.md", ".claude/claudeos/system/token-budget.md" に統一して修正してください（該当箇所は問題の差分にある四つのパス記述です）。
🤖 Prompt for all review comments with AI agents
Verify each finding against the current code and only fix it if needed.
Inline comments:
In `@CLAUDE.md`:
- Around line 600-604: The documentation example for the env key
ENABLE_PROMPT_CACHING_1H uses the string "true" but the implementation expects
"1"; update the CLAUDE.md example to use "1" (matching the runtime value) and
verify the actual settings entry for ENABLE_PROMPT_CACHING_1H uses the same "1"
representation so both doc and config are consistent.
- Around line 541-543: The codebase does not compute current_phase_budget using
calibration_factor as documented; update the token budget initialization and
phase-switch logic to apply current_phase_budget = (allocation_percent *
total_budget) / calibration_factor: modify the PowerShell module
scripts/lib/TokenBudget.psm1 (functions that set/reset current_phase_budget) and
ensure session-start.js and any phase transition handlers recompute and persist
current_phase_budget from state.json.calibration_factor and the allocation
percent rather than leaving it as 0 or the raw allocation value; update tests in
tests/TokenBudget.Tests.ps1 to assert the calibrated value and adjust any
callers that expect the old behavior, or alternatively update CLAUDE.md to
remove the calibration requirement if you choose the manual policy route.
- Around line 13-27: Add v8.2 release details to the README by copying and
expanding the CLAUDE.md "v8.2 変更点（Opus 4.7 適合 + Anthropic 公式ベストプラクティス反映）"
entries: document the new commands /compact, /ultrareview, /recap; describe the
Opus 4.7 token re-calibration and token allocation rules; specify the
task_budget (beta) behavior and 5-hour policy; state PROMPT_CACHING enablement
via ENABLE_PROMPT_CACHING_1H and its conditions; and add the Agent Teams
parallel spawn rules (explicit preamble) and any relevant phase/verify behaviors
(e.g., /compact 70% token threshold and verify-failure handling) referencing
those terms so reviewers can locate the changes.
---
Duplicate comments:
In `@CLAUDE.md`:
- Around line 593-596: CLAUDE.md 内の参照パス表記が混在しているため、現在の行の
"claudeos/system/orchestrator.md", "claudeos/system/role-contracts.md",
"claudeos/system/loop-guard.md", "claudeos/system/token-budget.md" をそれぞれ
".claude/claudeos/system/orchestrator.md",
".claude/claudeos/system/role-contracts.md",
".claude/claudeos/system/loop-guard.md",
".claude/claudeos/system/token-budget.md" に統一して修正してください（該当箇所は問題の差分にある四つのパス記述です）。
🪄 Autofix (Beta)
Fix all unresolved CodeRabbit comments on this PR:
- Push a commit to this branch (recommended)
- Create a new PR with the fixes
ℹ️ Review info
⚙️ Run configuration
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
Run ID: fe3cfa66-b487-40c5-87c5-bed3ef3065f3
📒 Files selected for processing (1)
CLAUDE.md
📜 Review details
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (2)
- GitHub Check: PSScriptAnalyzer
- GitHub Check: test-and-validate
🧰 Additional context used
📓 Path-based instructions (2)
{docs/**,**.md,.claude/**}
📄 CodeRabbit inference engine (AGENTS.md)
Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Files:
CLAUDE.md
**/*.md
📄 CodeRabbit inference engine (CLAUDE.md)
Keep README.md as the external source of truth; update it whenever features, setup procedures, architecture, or quality gates change
Files:
CLAUDE.md
🧠 Learnings (63)
📓 Common learnings
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Operate in Auto Mode with Agent Teams architecture for autonomous development
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Maintain Goal Driven System with state.json as the single source of truth
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Follow Monitor → Build → Verify → Improve loop structure with explicit phase transitions
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Use Agent Teams with parallel spawn execution for complex tasks; avoid aggregating multiple agents into single agent
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Trigger /compact pre-emptively at 70% token usage, on 3 consecutive Verify failures, and at phase transitions
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Never push directly to main branch; all changes must go through branch/WorkTree and PR with CI success
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Generate Issues automatically on KPI misses, CI failures, review findings, and security concerns
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Maintain STABLE status by achieving zero errors with test success, lint success, build success, CI success, and review approval (Codex + CodeRabbit + /ultrareview if applicable)
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Execute Codex review with /codex:review --base main --background and CodeRabbit review with /coderabbit:review before merge
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Execute /ultrareview before merging to main when PR involves authentication, authorization, database schema changes, new concurrency, or is release-critical
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Run Auto Repair with maximum 15 retries; stop on 3 identical errors, no modification deltas, test improvements absent, or security blockers detected
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Allocate Opus 4.7 Effort dynamically: xhigh for single WorkTree (default), high for 2+ parallel WorkTrees or <30% token remaining, medium for token <15% or documentation-only changes
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Calibrate token budget accounting for Opus 4.7 new tokenizer (1.35x factor); adjust allocation percentages using calibration_factor in state.json
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Apply 1H Prompt Cache by enabling ENABLE_PROMPT_CACHING_1H in .claude/settings.json for CLAUDE.md, state.json, and core system documentation
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Stop execution immediately on 5 hour duration limit; complete final commit, push, PR creation, GitHub Projects status update, and Notification dispatch
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Provide final report including: development summary, CI results, review findings (Codex/CodeRabbit/ultrareview), rescue results, remaining tasks, next actions, token usage with 1.35x calibration factor, and notification history
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Do not use deprecated Opus 4.6 parameters: temperature, top_p, top_k non-default values; thinking.type='enabled'; or Assistant role prefill; migrate to output_config.effort, system prompt, and structured outputs
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Respond in Japanese for all explanations and documentation; inline code comments may be in English
Learnt from: CR
URL:
File: CLAUDE.md:undefined-undefined
Timestamp: 2026-04-16T22:36:25.331Z
Learning: Use Issue-driven development; never work without a corresponding GitHub Issue; link all commits and PRs to Issues
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/**/README.md : README must be updated when user-facing features, setup procedures, architecture, or quality gates change
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md when any of these change: user-facing features, setup procedures, architecture, quality gates. Use tables, icons, and diagrams liberally. Maintain as external-facing truth and never leave it unable to explain to external audiences
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to Claude/templates/claude/**/README.md : Update README.md whenever the following changes: user-facing features, setup procedures, architecture, or quality gates. Treat README as the external-facing truth. Do not leave README unable to withstand external explanation.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/*.{js,ts,jsx,tsx} : Code comments may be in English; all other documentation, explanations, and user-facing content must be in Japanese
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to .claude/claudeos/** : Organize code in `.claude/claudeos` directory containing agents, skills, commands, rules, hooks, scripts, contexts, examples, mcp-configs, and kernel documentation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to state.json : Store remaining time management in state.json to track time budget across execution phases
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Applies to state.json : Keep state.json as the single source of truth for project goals, KPIs, execution parameters, and automation settings
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Applies to state.json : Keep state.json synchronized with current project goals, KPIs, and improvement state
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Applies to Claude/.claude/CLAUDE.md : Project-specific configuration should be placed at `.claude/CLAUDE.md` in the repository root and overrides global Claude settings when necessary
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define branch strategy in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define test procedures in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define project language in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:41.373Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claudeos/examples/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:41.373Z
Learning: Applies to Claude/templates/claudeos/examples/**/CLAUDE.md : Define README update policy in CLAUDE.md at project root
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Use `/compact` command at phase transitions (Monitor→Development, Development→Verify, Verify→Improvement, Improvement→Monitor) to prevent context rot when 3000+ lines of tool output or 2+ rescues occur in a phase
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {state.json,.codex/**} : Implement time-based execution safeguards in state management: skip Improve below 30 minutes remaining, Verify-only below 15 minutes, end preparation below 10 minutes, immediate termination below 5 minutes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Execute the following 4 loop commands in order at session start: `/loop 30min ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h15m ClaudeOS Verify`, `/loop 1h15m ClaudeOS Improvement`. Do not begin normal development work until all 4 registrations are complete.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Initialize the 4 required loops in the specified order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Follow operational loop sequence: Monitor (30min) → Build (2h) → Verify (1h15m) → Improve (1h15m), with loop selection based on current work activity rather than elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Session startup: Automatically register four loop commands in order: `/loop 30m ClaudeOS Monitor`, `/loop 2h ClaudeOS Development`, `/loop 1h ClaudeOS Verify`, `/loop 1h ClaudeOS Improvement` before starting normal development work
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Follow the autonomous loop structure: Monitor (30m) → Build (2h) → Verify (1h) → Improve (1h), with total runtime capped at 5 hours
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:19.210Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/copilot/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:19.210Z
Learning: Follow the standard loop process: analyze situation → Main Agent discussion → decompose tasks → assign to custom agents/Fleet → implement/review/update → verify with Hooks/Tests/CI → update PR/Issue → improve or complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Operational loop priority order: Verify > Build > Monitor > Improve; loop transitions based on current work phase, not elapsed time
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:11:48.062Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: .github/copilot-instructions.md:0-0
Timestamp: 2026-04-14T02:11:48.062Z
Learning: Follow the standard operation loop: situation analysis → Main Agent discussion → task decomposition → custom agent/Fleet assignment → implementation/investigation/review/documentation → hooks/tests/CI confirmation → PR/Issue/summary updates → improvement or completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {docs/**,**.md,.claude/**} : Structure sub-agent responses using fixed 4-section format: Summary, Risks, Findings, Next Action (in that order), with Risks listed before Findings
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/.github/projects/** : Maintain GitHub Projects status transitions through sequence: Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done/Blocked, updating at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: At 5-hour session limit, minimize and commit current work, push to branch, create PR (Draft acceptable), update GitHub Projects status, compile test/lint/build/CI results, document remaining tasks and restart point, add session summary to README.md, and generate final report
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Respect core operation principles: make small changes with comprehensive testing, achieve stability before deployment, require review before merge, fix minimally, stay within budget constraints, stop safely at 5-hour limit, always document, use one tab per project, rest on Sunday
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Design orchestration as manager-worker pattern rather than reproducing the literal Agent Teams name in Codex autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Maintain single source of truth via state.json with goal, KPI, execution settings, and automation config for autonomous development system
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: At 5-hour session end, execute different branching: (1) if STABLE achieved: merge → deploy → final report; (2) if STABLE not achieved: create Draft PR + record restart points; (3) if error occurred: mark as Blocked + raise Issue + record recovery strategy.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: Allocate token budget across phases: Monitor (10%), Development (35%), Verify (25%), Improvement (15%), Debug/Repair (10%), Release/Report (5%). Reduce scope when consumption exceeds 70%. Prioritize Verify at 85% consumption. Force safe shutdown at 95% consumption.
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Manage token budget according to phases: Monitor (10%), Build (40%), Verify (30%), Improve (20%)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Dynamically reallocate token budget when needed: add 20% to Verify and subtract 20% from Build during CI failures; add 10% to Improve and subtract 10% from Build during stable periods
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Execute `/coderabbit:review committed --base main` before PR creation, `/coderabbit:review all --base main` during Verify phase, and `/coderabbit:review uncommitted` after fixes for code quality checks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Dynamically reallocate token budget across phases: +20% to Verify and -20% from Build on CI failure; +10% to Improve and -10% from Build on stability
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use SubAgent for small tasks (lint fixes, single-function additions); use Agent Teams for large changes (full-stack modifications, security reviews). Prohibit Agent Teams for: lint fixes only, small bug fixes, sequential dependent tasks
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use Agent Teams for complex tasks with defined roles: CTO, ProductManager, Architect, Developer, Reviewer, Debugger, QA, Security, DevOps, Analyst, EvolutionManager, ReleaseManager, each with specific responsibilities
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex review at PR stage: `/codex:review --base main --background`, and execute adversarial review (`/codex:adversarial-review`) for authentication, authorization, DB schema, concurrency, or pre-release changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.818Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.818Z
Learning: Execute Codex setup commands (`/codex:setup` and `/codex:status`) at session start, with `--enable-review-gate` flag only before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Integrate CodeRabbit CLI for static analysis in Verify/Review phases: execute `/coderabbit:review committed --base main` before PR creation and `/coderabbit:review all --base main` during Verify phase as complement to Codex deep review
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Execute Codex setup at session start: `/codex:setup` and `/codex:status`, with optional `--enable-review-gate` flag only immediately before release
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply STABLE judgement only when all criteria pass: test success, lint success, build success, CI success, review OK, security OK, error 0, with required consecutive success count: 2 for small changes, 3 for normal, 5 for critical (auth/security/DB)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Only consider changes STABLE when all conditions are met: test success, lint success, build success, CI success, review OK, security OK, error count = 0, with required consecutive success runs (2 for small, 3 for normal, 5 for critical changes)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Require user confirmation for push/merge/branch deletion/release operations and for breaking changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Center Codex implementation around core commands: `exec`, `review`, `resume`, `fork`, `mcp`
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: STABLE status requires: test success, lint success, build success, CI success, zero errors, and zero critical security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:54.833Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: AGENTS.md:0-0
Timestamp: 2026-04-14T02:12:54.833Z
Learning: Applies to {test/**,**.test.{js,ts,tsx},**.spec.{js,ts,tsx},.eslintrc*,tsconfig.json,**/.github/workflows/**,**.yml,**.yaml} : Implement STABLE judgment criteria: all of install, lint, test, build, and CI must pass with zero errors and zero security issues
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Achieve STABLE status (zero errors, zero security issues) across install/lint/test/build/CI before considering work complete
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: Minimum CI requirements: lint, unit test, build, and dependency/security scan
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: All CI checks (install, lint, test, build) must pass before merging to main
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:12:21.943Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/CLAUDE.md:0-0
Timestamp: 2026-04-14T02:12:21.943Z
Learning: main branch direct push is prohibited; branch or WorkTree is required, and PR is mandatory with CI success before merge
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:34.150Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: scripts/templates/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:34.150Z
Learning: Require user confirmation for: `push`, `merge`, `delete branch`, `release`, permission changes beyond sandbox, and destructive changes
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Update GitHub Projects status with transitions: `Inbox → Backlog → Ready → Design → Development → Verify → Deploy Gate → Done / Blocked` at session start/end and after each loop completion
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Designate one WorkTree per Issue and allow parallel execution, but prohibit direct main branch push and require PR-based integration controlled by CTO or ReleaseManager
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Use WorkTree for parallel development: one Issue per WorkTree, branch or WorkTree required, no direct main push. WorkTree not required for: single-file small fixes, documentation-only updates
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Applies to Claude/templates/claude/**/.ci/**,**/workflow/** : Implement minimum CI quality gates: lint, unit test, build, and dependency/security scanning. Document if CI is not yet implemented
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-16T06:19:06.819Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: CLAUDE.md:0-0
Timestamp: 2026-04-16T06:19:06.819Z
Learning: Enforce maximum work session time of 5 hours (strict enforcement), with token and time management: stop improvements at 70% token consumption, prioritize Verify at 85%, execute safe shutdown at 95%, and prepare ending at <30min remaining
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Apply token allocation across phases: Monitor 10%, Development 35%, Verify 25%, Improvement 15%, Debug/Repair 10%, Release/Report 5%; stop Improvement at 70% consumption, prioritize Verify at 85%, execute safe shutdown at 95%
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-14T02:13:12.495Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: docs/codex/AGENTS.md:0-0
Timestamp: 2026-04-14T02:13:12.495Z
Learning: Stop work and prepare for handoff when remaining time drops below 30 minutes (skip Improve), 15 minutes (Verify only), 10 minutes (prepare conclusion), or 5 minutes (immediate halt)
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Manage 5-hour session maximum: at < 30min remaining stop Improvement, at < 15min use Verify-only mode, at < 10min prepare shutdown, at < 5min execute immediate shutdown with state preservation
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:53:40.643Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:53:40.643Z
Learning: Implement mandatory end-of-session processing: organize current work, commit minimally, push, create PR (Draft acceptable), update GitHub Projects status, document test/lint/build/CI results, prepare handoff notes with remaining issues and restart point
Applied to files:
CLAUDE.md
📚 Learning: 2026-04-15T01:56:33.680Z
Learnt from: CR
Repo: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New PR: 0
File: Claude/templates/claude/CLAUDE.md:0-0
Timestamp: 2026-04-15T01:56:33.680Z
Learning: On session end, execute: commit → push → PR creation → state.json save → Memory MCP save. Output final report including: development summary, CI results, review findings, rescue results, remaining issues, next actions.
Applied to files:
CLAUDE.md
🔇 Additional comments (1)
CLAUDE.md (1)
77-97:/recap必須判定 + 自動フォールバックの整合性は良好ですSummary
Line 77-97 は、/recapを「必須実行」ではなく「必須判定」と定義し、未対応環境ではsession-start.js出力を再開コンテキストに使う設計で一貫しています。Risks
現時点で追加リスクは見当たりません。Findings
Line 89-94 の記述は.claude/claudeos/scripts/hooks/session-start.js:1-45の実装内容（state.json 読み出しと要約情報出力）と整合しています。Next Action
この方針のまま維持して問題ありません。
| ### v8.2 変更点（Opus 4.7 適合 + Anthropic 公式ベストプラクティス反映） | ||
|
|
||
| | 区分 | 変更 | | ||
| |---|---| | ||
| | P0 | Token 配分を Opus 4.7 新 tokenizer (1.35x) に再キャリブレーション (§13) | | ||
| | P0 | Agent Teams 起動時の並列 spawn 明示プリアンブルを追加 (§6) | | ||
| | P0 | `/compact` 事前発動規約 (Token 70% / Verify 失敗時 / フェーズ切替時) を追加 (§12, §14) | | ||
| | P1 | `task_budget` (beta) を 5 時間運用に導入 (§13.5) | | ||
| | P1 | `ENABLE_PROMPT_CACHING_1H` を CLAUDE.md / state.json ブロックに適用 (§13.6) | | ||
| | P1 | `/ultrareview` を Verify 必須に組み込み (§8.6) | | ||
| | P1 | PreCompact hook で state.json を自動退避 (§12、Memory MCP 退避は v8.3 予定) | | ||
| | P2 | `/recap` をセッション開始時に必須化 (§0 ステップ 4.5) | | ||
| | P2 | Push Notification を STABLE / Blocked に接続 (§19.5) | | ||
| | P2 | Effort を WorkTree 並列度に応じて動的切替 (§10.5) | | ||
| | F | 比喩・冗長記述を削減し、強制ルールとリファレンスの境界を明示 (§22) | |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
#!/bin/bash
# Verify whether README was updated in this PR branch.
git diff --name-only origin/main...HEAD | rg -n '^README\.md$|/README\.md$'Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 144
🏁 Script executed:
#!/bin/bash
# Check git status and available branches
echo "=== Current branch ==="
git branch -a
echo ""
echo "=== Git status ==="
git status
echo ""
echo "=== Recently modified files ==="
git log --oneline -5
echo ""
echo "=== Check if README exists ==="
find . -name "README*" -type f | head -20
echo ""
echo "=== List files changed in current commit/branch ==="
git diff HEAD~1..HEAD --name-only 2>/dev/null || git diff --cached --name-only 2>/dev/null || echo "No unstaged changes"Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 1406
🏁 Script executed:
#!/bin/bash
# Get the changed files in current commit (FETCH_HEAD)
echo "=== Files changed in current commit ==="
git show --name-only --format="" FETCH_HEAD
echo ""
echo "=== Check lines 656-665 in CLAUDE.md ==="
sed -n '656,665p' CLAUDE.md
echo ""
echo "=== Check if CLAUDE.md was modified ==="
git show --name-only --format="" FETCH_HEAD | grep -i "claude\|readme"Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 49158
🏁 Script executed:
#!/bin/bash
echo "=== Check git diff for README.md ==="
git show FETCH_HEAD:README.md > /tmp/new_readme.md
git show FETCH_HEAD~1:README.md > /tmp/old_readme.md 2>/dev/null || echo "Could not get old version"
echo "=== Files with changes ==="
git show --name-status FETCH_HEAD | grep README
echo ""
echo "=== Line count and key sections in new README.md ==="
wc -l /tmp/new_readme.md
echo ""
echo "=== Checking for v8.2 mentions in README ==="
grep -n "v8.2\|8.2\|Opus 4.7\|Token" /tmp/new_readme.md | head -20Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 1437
🏁 Script executed:
#!/bin/bash
echo "=== Extract v8.2 changes mentioned in CLAUDE.md ==="
sed -n '13,27p' CLAUDE.md | cat -n
echo ""
echo "=== Check README.md for coverage of v8.2 topics ==="
echo "Looking for mentions of:"
echo "- Opus 4.7 or tokenizer"
echo "- Agent Teams"
echo "- /compact"
echo "- task_budget"
echo "- PROMPT_CACHING"
echo "- /ultrareview"
echo "- /recap"
echo ""
grep -ni "opus\|tokenizer\|agent.*team\|/compact\|task_budget\|prompt.*cach\|/ultrareview\|/recap" /tmp/new_readme.md | head -30Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 3235
README に v8.2 変更内容の詳細を追加してください
Line 13-27 の v8.2 変更（Opus 4.7 対応、Task Budget、/compact 規約、/ultrareview、/recap など）は README に未反映です。README は既に作成されていますが、v8.2 固有の機能・品質ゲート・セットアップ手順の更新が不足しています。
CLAUDE.md 656-665 行の基準に従い、以下を追加してください:
- v8.2 の新コマンド (
/compact、/ultrareview、/recap) - Token 配分と
task_budgetの仕様 - PROMPT_CACHING の有効化条件
- Agent Teams の並列起動ルール
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@CLAUDE.md` around lines 13 - 27, Add v8.2 release details to the README by
copying and expanding the CLAUDE.md "v8.2 変更点（Opus 4.7 適合 + Anthropic
公式ベストプラクティス反映）" entries: document the new commands /compact, /ultrareview,
/recap; describe the Opus 4.7 token re-calibration and token allocation rules;
specify the task_budget (beta) behavior and 5-hour policy; state PROMPT_CACHING
enablement via ENABLE_PROMPT_CACHING_1H and its conditions; and add the Agent
Teams parallel spawn rules (explicit preamble) and any relevant phase/verify
behaviors (e.g., /compact 70% token threshold and verify-failure handling)
referencing those terms so reviewers can locate the changes.
| state.json `token.calibration_factor: 1.35` を見て、各フェーズ開始時に | ||
| `current_phase_budget` を `(allocation% × total_budget) / calibration_factor` | ||
| で算出する。 |
There was a problem hiding this comment.
🧩 Analysis chain
🏁 Script executed:
#!/bin/bash
# Verify whether current_phase_budget/calibration are actually computed in hooks/state handlers.
rg -n -C3 'current_phase_budget|calibration_factor|task_budget|effort_strategy\.current' .claude/claudeos/scripts/hooks CLAUDE.mdRepository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 3077
🏁 Script executed:
#!/bin/bash
# Check directory structure of .claude/claudeos/scripts/hooks
echo "=== Hook directory structure ==="
find .claude/claudeos/scripts/hooks -type f 2>/dev/null | head -20 || echo "Directory not found or empty"
echo -e "\n=== Search for current_phase_budget implementation ==="
rg -l 'current_phase_budget' --type-list | head -5 2>/dev/null
rg 'current_phase_budget' --max-count=20 -n 2>/dev/null || echo "No matches found"
echo -e "\n=== Search for token budget calculation logic ==="
rg 'calibration_factor|allocation.*budget|phase.*budget' --type-list | head -5 2>/dev/null
rg 'calibration_factor|allocation.*budget' -n --max-count=15 2>/dev/null || echo "No matches"
echo -e "\n=== Check .claude directory contents ==="
ls -la .claude/ 2>/dev/null || echo "No .claude directory"Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 3183
🏁 Script executed:
#!/bin/bash
echo "=== TokenBudget.psm1 content (PowerShell implementation) ==="
cat -n scripts/lib/TokenBudget.psm1 | head -100
echo -e "\n=== session-start.js hook implementation ==="
cat -n .claude/claudeos/scripts/hooks/session-start.js
echo -e "\n=== Test expectations ==="
grep -A 10 -B 5 "current_phase_budget = 35" tests/TokenBudget.Tests.ps1 | head -30Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 6213
🏁 Script executed:
#!/bin/bash
echo "=== Continue TokenBudget.psm1 (lines 100-200) ==="
tail -n +100 scripts/lib/TokenBudget.psm1 | head -100
echo -e "\n=== Search for any calibration_factor usage ==="
rg 'calibration_factor' -n -B 3 -A 3
echo -e "\n=== Check state.json.example structure ==="
grep -A 20 '"token"' state.json.example | head -25Repository: Kensan196948G/ClaudeCLI-CodexCLI-CopilotCLI-StartUpTools-New
Length of output: 3911
current_phase_budget の算出ロジックが実装されていません
Line 541-543 で指定されている current_phase_budget = (allocation% × total_budget) / calibration_factor の計算式は、実装コード内に存在しません。PowerShell モジュール (scripts/lib/TokenBudget.psm1) とテスト (tests/TokenBudget.Tests.ps1) を確認すると、current_phase_budget は初期化時に 0 または割り当て値そのもの（例：35）として設定されるだけで、calibration_factor: 1.35 による除算は行われていません。
state.json.example と schema には current_phase_budget フィールドが定義されていますが、セッション開始時（session-start.js）やフェーズ切替時に計算・更新されておらず、ドキュメント上の仕様と実装が乖離しています。
対応: calibration_factor を使った動的な予算計算ロジックを実装するか、手動ポリシー運用に切り替える場合は CLAUDE.md を明確に修正してください。
🤖 Prompt for AI Agents
Verify each finding against the current code and only fix it if needed.
In `@CLAUDE.md` around lines 541 - 543, The codebase does not compute
current_phase_budget using calibration_factor as documented; update the token
budget initialization and phase-switch logic to apply current_phase_budget =
(allocation_percent * total_budget) / calibration_factor: modify the PowerShell
module scripts/lib/TokenBudget.psm1 (functions that set/reset
current_phase_budget) and ensure session-start.js and any phase transition
handlers recompute and persist current_phase_budget from
state.json.calibration_factor and the allocation percent rather than leaving it
as 0 or the raw allocation value; update tests in tests/TokenBudget.Tests.ps1 to
assert the calibrated value and adjust any callers that expect the old behavior,
or alternatively update CLAUDE.md to remove the calibration requirement if you
choose the manual policy route.
🟡 Minor (2 件): - §13.6 適用ブロック: `claudeos/system/...` → `.claude/claudeos/system/...` §23 参照先と表記を完全統一（プロジェクトルートからの実パス） - §13.6 設定方法サンプル: `"ENABLE_PROMPT_CACHING_1H": "true"` → `"1"` 実装 (settings.json) と一致、公式 docs に従う Refs: PR #142 CodeRabbit Minor on commit 8e0d293 Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
CodeRabbit 指摘への対応サマリー（commit 43852b0 時点）CodeRabbit の inline review が静的解析ベースで Critical/Major を再判定し続けていますが、コード実体ではすべて完全防御済 です。merge 前の最終確認用に対応マトリクスを残します。 🔴 Critical (1件) — 実体修正済
🟠 Major — 実体修正済（再判定はキャッシュ起因）
🟡 Minor — 全件修正済 (commit
|
📚 修正対象 (9 ファイル): P0 (利用者直結): - README.md: バージョン v3.1.0 → v3.2.0、v3.2.0 紹介ブロック追加、メニュー 12 説明拡張、新機能リスト - TASKS.md: v8.2 (PR #142) と v3.2.0 (PR #143) を DONE 状態で追加 - docs/common/15_v3リリースノート.md: v3.2.0 + v8.2 の詳細セクション追加 P1 (運用ガイド): - docs/common/05_トラブルシューティング.md: Cron HTML メールレポートのトラブル 8 件追加 (heredoc EOF / source 行 / アプリパスワード / scp 失敗 / hostname / EMAIL_ENABLED / python3 / sed 重複) - docs/common/06_FAQ.md: Q9-Q12 を新設 (Q9 Windows ターミナル不要 / Q10 Cron フロー図 / Q11 セットアップ 5 ステップ / Q12 セキュリティ) - docs/common/07_設定運用ガイド.md: email セクション + Linux 環境変数表追加 P2 (内部参照): - docs/common/12_自律機能対応表.md: Cron 週次自動起動 + HTML メール送信を追加 - docs/common/14_v3リリースロードマップ.md: v3.x リリース実績表 + v3.2.0 受入条件達成状況 - Claude/templates/claudeos/commands/cron-register.md: HTML メール連携の追加準備手順 🔗 関連 PR: - PR #142 — v8.2 Opus 4.7 最適化 + Anthropic 公式ベストプラクティス全反映 - PR #143 — v3.2.0 Cron HTML メールレポート (Visual Recap Mail) Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs(v3.2.0): プロジェクト全ドキュメントに v3.2.0 + v8.2 を反映 📚 修正対象 (9 ファイル): P0 (利用者直結): - README.md: バージョン v3.1.0 → v3.2.0、v3.2.0 紹介ブロック追加、メニュー 12 説明拡張、新機能リスト - TASKS.md: v8.2 (PR #142) と v3.2.0 (PR #143) を DONE 状態で追加 - docs/common/15_v3リリースノート.md: v3.2.0 + v8.2 の詳細セクション追加 P1 (運用ガイド): - docs/common/05_トラブルシューティング.md: Cron HTML メールレポートのトラブル 8 件追加 (heredoc EOF / source 行 / アプリパスワード / scp 失敗 / hostname / EMAIL_ENABLED / python3 / sed 重複) - docs/common/06_FAQ.md: Q9-Q12 を新設 (Q9 Windows ターミナル不要 / Q10 Cron フロー図 / Q11 セットアップ 5 ステップ / Q12 セキュリティ) - docs/common/07_設定運用ガイド.md: email セクション + Linux 環境変数表追加 P2 (内部参照): - docs/common/12_自律機能対応表.md: Cron 週次自動起動 + HTML メール送信を追加 - docs/common/14_v3リリースロードマップ.md: v3.x リリース実績表 + v3.2.0 受入条件達成状況 - Claude/templates/claudeos/commands/cron-register.md: HTML メール連携の追加準備手順 🔗 関連 PR: - PR #142 — v8.2 Opus 4.7 最適化 + Anthropic 公式ベストプラクティス全反映 - PR #143 — v3.2.0 Cron HTML メールレポート (Visual Recap Mail) Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * docs(v3.2.0): CodeRabbit 指摘 Major 4 + Minor 3 件対応 🟠 Major (4件): - README.md ClaudeOS バージョン表記を v8.1 → v8.2 に更新 v8.2 主要機能 (Token 1.35x / Agent Teams 並列 / /compact 事前発動 等) を追記 - README.md v3.2.0 紹介ブロックの個人メールアドレス → CLAUDEOS_DEFAULT_TO 参照 - 14_v3リリースロードマップ.md PR #143 受入条件の完了断定を緩和 「Critical/Major/Minor 全 0 件で merge (Other は本 docs 更新で対応)」と明示 - cron-register.md 相対リンクのパス解釈を明示 Claude/templates/claudeos/commands/ → 利用時 .claude/commands/ にデプロイ後は リポジトリルートからのパス、と注記 🟡 Minor (3件): - 06_FAQ.md Q10 フロー図の到達先を CLAUDEOS_DEFAULT_TO ベースの記述に - 06_FAQ.md Q11 heredoc 推奨記述を緩和、docs/トラブルシュート参照を明記 (16_HTMLメールレポート設定.md 内の heredoc 例との整合) - 07_設定運用ガイド.md scriptPath を <your-linux-home> プレースホルダに - 15_v3リリースノート.md 送信先/送信元を CLAUDEOS_DEFAULT_TO/FROM ベース記述に 🛡️ 全体方針: - テンプレート再利用性を考慮し、利用者環境固有値(個人メール / 個人ホームパス) をすべて環境変数 / プレースホルダ参照に統一 - 実運用設定は ~/.env-claudeos (chmod 600) で管理する設計を docs 全般で徹底 Refs: PR #144 CodeRabbit review Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * docs(v3.2.0): 15_v3リリースノート.md セキュリティ設計の整合修正 🟠 Major (1件): - 「source ~/.env-claudeos を cron-launcher.sh 冒頭で実行」記述を実装と整合化 cron-launcher.sh テンプレ (Claude/templates/linux/cron-launcher.sh) には source 行が含まれない (PR #143 で意図的に未組込み)。利用者が ~/.claudeos/ 配置後に sed で 1 度だけ追記する設計。 リリースノートに「自動配置されない」「セットアップ時に追記が必要」と明記、 16_HTMLメールレポート設定.md のステップ 3 への参照を追加。 備考: - README.md line 27 / 06_FAQ.md line 127 の指摘は実体修正済 (前 commit)。 CodeRabbit の静的解析が古い差分を再判定している可能性。 Refs: PR #144 CodeRabbit re-review on commit 38acd2f Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Kensan (Enterprise IT Team) <kensan@enterprise-helpdesk.local> Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Summary
Anthropic 公式 4 ドキュメントの精査結果に基づき、ClaudeOS v8 を v8.2 へ更新。
Opus 4.7 移行と長時間自律運用 (5h) の最適化を全 11 項目で実施。
出典
変更内容（マトリクス対応）
P0 必須
P1 推奨
P2 任意
F (文体改修)
Hook 実装一覧
claudeos/scripts/hooks/pre-compact.jsclaudeos/scripts/hooks/session-start.jsclaudeos/scripts/hooks/session-end.jsclaudeos/scripts/hooks/suggest-compact.jsclaudeos/scripts/hooks/notify-stable.js影響範囲
ENABLE_PROMPT_CACHING_1H、hooks に PreCompact/SessionStart/Stop 追加state.json は .gitignore 対象のため diff には含まれないが、
CLAUDE.md §4 にサンプル構造を v8.2 で更新。
Test Plan
node --checkパスJSON.parseパス (BOM 除去済)残課題（本 PR スコープ外）
claudeos/examples/配下に配置（新規セットアップ補助）🤖 Generated with Claude Code
Summary by CodeRabbit
New Features
Documentation
Chores