-
Notifications
You must be signed in to change notification settings - Fork 30
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
10.12 compatibility #42
Comments
good job. Thanks for your information. If both touchpad/keyboard and internal camera don't work properly, then it could be something wrong with USB |
Synaptics. No, from what I'm reading FN keys and trackpad prefpane doesn't work because of modification in system code in 10.12. Rehabman is working on update of VoodooPS2, but in the meantime I'm trying to set up ApplePS2SmartTouchPad kext. It's working way better, with already some of FN functionality implemented. |
can you share the ApplePS2SmartTouchPad kext? i was also looking for a viable replacement for VoodooPS2. |
http://forum.osxlatitude.com/index.php?/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/ 2016-09-20 10:40 GMT+02:00 Risha Sringa Changmai [email protected]:
|
ok, will wait for the voodooPS2. anyway 10.12 coming out today.will do a fresh install when its out |
installed 10.12 release from yesterday. up and running well.smooth. audio and everything works. with some glitches -
EDIT: VoodooPS2 I was using in El Capitan works if I keep it in the clover kext folder. but if I install it. it stops working |
Both point were working for me. W dniu środa, 21 września 2016 Risha Sringa Changmai <
Pozdrawiam, |
can you check if any application cracks working, coz none of them working on my end get I get this if I open any of the cracks - System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_CRASH (SIGKILL) Termination Reason: EXEC, [0xc] This UPX compressed binary contains an invalid Mach-O header and cannot be loaded.` |
Hey guys, how do you make the sound work? |
using the patched Kext or the dummy hack? |
Dummy hda. Check the one that i've been posting here in the past. It's in W dniu sobota, 1 października 2016 Kaijun Chen [email protected]
Pozdrawiam, |
i used AppleHDA patcher. works like a charm |
@michaelspeed |
@Majkwin ok, i just re-patched the kext with the new AppleHDA Patcher and generated the new DummyHDA, now it works. |
Any updates? Are some of You currently using Sierra? |
🙋 and i found a temporary solution for corrupt trackpad preference: other problems plz check: https://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/ |
do you guys get a "could not load Display preferrence panel" in settings with HD4400? |
@michaelspeed yes. check the second link i posted. and a thread inside it also described this problem: https://www.tonymacx86.com/threads/display-prefpane-cant-load-found-the-problem-and-solution.203955/ If you are same lazy as me, and don't wanna do further research, just copy:
into the EDID section in Clover Configurator and Enable Inject EDID just like this: |
no worry, Clover Configurator will trim the spaces between the codes automatically! |
thanx will give it a try. i have been banned from tonnymacx86 for using app cracks |
confirmend working thanx |
did anyone try 10.12.1 ? i m hearing it breaks the compatibility a lot? |
i have a strange bug here, when watching youtube it plays ok, but when i start to play form other sites the it freezes, not even the mouse moves. its like KP. i cannot see any logs for it, but definitely feels like KP. any solutions. Flash is installed and upgraded. |
I've just installed Sierra (clean) on my i7 variant, and everything works. I face the following issues:
On a side note, I'm on BIOS v2.30, and have flashed the ME files in the body of the post. |
@Ace73 Only Sierra has such issues? @michaelspeed i also have some kind of this issue, but it's not reproducible actually, it just happens randomly(not that often, once every 1/2 month?). Especially while watching YouTube, or running Flash player. |
@michaelspeed or because that you injected the EDID? rollback and see if it is fixed? |
confirm about shutdown not working! i only shutdown once a week. |
@michaelspeed i haven't shut the laptop down for a while. I will also test if EDID affect shutdown. Maybe we can't just simply copy the EDID from other model. |
yes but the EDID is definitely working. the display preference is working |
@Majkwin Can you be more specific which fn keys don't work? I have installed the newest VoodooPS2Controller by RehabMan (Link: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller) from 2016-12-08 and it works like a charm on Mac OS X 10.12. I can use fn keys for brightness and volume control, inclusive disable sound. However, the touchpad settings in system preferences doesn't work, too. Edited: After 2 restarts i can edit the touchpad settings in system preferences, too. So i hope this solves your issue 1. |
After the installation i get the posted Install Log and it restarts to Clover and i startet the Installation again. But its allways the same installation procedure and not a different step then the first installation. Now i tried the Now i try to restore from a TimeMachine Backup |
It looks identical, but trust me, the second install is different and legit.
After second install, boot to internal from USB Clover... and it should
complete the install and get to the desktop.
Here's hoping anyway (PS. It only shows the log if there was an error).
…On 20 April 2017 at 21:37, hehljo ***@***.***> wrote:
After the installation i get the posted Install Log and it restarts to
Clover and i startet the Installation again. But its allways the same
installation procedure and not a different step then the first installation.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroZ8hUMxwiBa9D7YE1YxJ_XF19PpXks5rx0N4gaJpZM4J8hNj>
.
|
Thanks for all your help. |
Hooray... don't forget that BIOS flash from EFI shell, otherwise machine
will not shutdown :-(
…On 21 April 2017 at 16:36, hehljo ***@***.***> wrote:
Thanks for all your help.
I get it to work with a TimeMachine Restore :)
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroaPLAU_9_MjcJJAIsVbeJUTo8Jmvks5ryE5ogaJpZM4J8hNj>
.
|
The most works fine. Only thing is the Touchpad which i'm experimenting with. Only the leftclick works on the Hardware Button of the Touchpad. No Touch functionality and no right click. |
I used VoodooPS2Controller.kext, I have left click, right click on
hardware... click and double-finger drag, right-click on tap is hard, as
sensitivity is too low... I disabled with FN-key and use wireless mouse
with micro-dongle... :-)
…On 21 April 2017 at 23:24, hehljo ***@***.***> wrote:
The most works fine.
Shutdown reboot and all that stuff works.
I'm using a TP-LINK nano Wlan Stick with the divers directly from TP-LINK.
Only thing is the Touchpad which i'm experimenting with. Only the
leftclick works on the Hardware Button of the Touchpad. No Touch
functionality and no right click.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroXjGphrY4IjRnGfjtwmb0iYlL8A2ks5ryK4mgaJpZM4J8hNj>
.
|
The last try i looked into Touchpad options and it doesn't recognized my Touchpad.# Again, thanks for your help with your EFI folder without it would be a lot of work for me!! |
np, glad to hear it's working!
…On 22 April 2017 at 01:20, hehljo ***@***.***> wrote:
The last try i looked into Touchpad options and it doesn't recognized my
Touchpad.#
Now after another try of installing the VoodooPS2Controller all works fine
:)
Again, thanks for your help with your EFI folder without it would be a lot
of work for me!!
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroVlMTu5c8xrV7olJ5ibeRI-T5W5pks5ryMkhgaJpZM4J8hNj>
.
|
Does 10.12.4 has any usb sleep issue? |
I have not had any sleep issue with V5-573 (i7-4500u) need to use keyboard
to wake laptop tho (I have not experimented with lid-wake, as I know the
only solution I have seen disables Lid-Sleep, which can lead to overheating
if you happen to put your laptop in the laptop bag while still running
(this happened on my previous HackBook Pro (HP Pavilion). The laptop was
almost too hot to touch when I removed it from the bag 10min later -- lucky
I noticed, or it could have been damaged. Just stick with lid-sleep, and
wake with the keyboard!
NOTE: I have thoroughly tested it when newly installed, but I have no need
to put laptop to sleep, so don't currently use it... I will test it again
when I can...
…On 4 May 2017 at 14:29, notly ***@***.***> wrote:
Does 10.12.4 has any usb sleep issue?
I have suffered this...
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcrofHL6BpsGxJPEFsW_KGihwKLG5T6ks5r2VQ2gaJpZM4J8hNj>
.
|
the laptop usb devices(inner keyboard + touchpad is ok), bug outter usb is not work from sleep. |
Hmmm, I will have to test this when I get home... I believe my USB3.0
(rear) port works after sleep... and I use a wireless USB dongle in
left-hand USB port, and have had no issue with that... let me check...
…On 4 May 2017 at 15:02, notly ***@***.***> wrote:
the laptop usb devices(inner keyboard + touchpad is ok), bug outter usb is
not work from sleep.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroUdSRdxSMgUTNbFiAQdXNo_RI3OAks5r2Vv1gaJpZM4J8hNj>
.
|
Hmmm, a quick test concludes that all my USB ports work fine after wake...
I can give you my EFI folder if you want?
…On 4 May 2017 at 15:04, Craig Cooper ***@***.***> wrote:
Hmmm, I will have to test this when I get home... I believe my USB3.0
(rear) port works after sleep... and I use a wireless USB dongle in
left-hand USB port, and have had no issue with that... let me check...
On 4 May 2017 at 15:02, notly ***@***.***> wrote:
> the laptop usb devices(inner keyboard + touchpad is ok), bug outter usb
> is not work from sleep.
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AZcroUdSRdxSMgUTNbFiAQdXNo_RI3OAks5r2Vv1gaJpZM4J8hNj>
> .
>
|
https://github.com/V5OSX/kexts that's all kexts i have install. maybe i will try FakePCIID_XHCIMux.kext (Maybe fix USB Sleep issue) |
This is all I have:
FakePCIID_Intel_HD_Graphics.kext
FakePCIID.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC.kext
IntelGraphicsFixup.kext
Lilu.kext
RealtekRTL8111.kext
USBInjectAll.kext
so there shouldn't be any need?!
…On 4 May 2017 at 15:09, notly ***@***.***> wrote:
https://github.com/V5OSX/kexts that's all kexts i have install. maybe i
will try FakePCIID_XHCIMux.kext (Maybe fix USB Sleep issue)
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroX9JFbvPRA8Ya8R01X6qJILG1JuQks5r2V1ugaJpZM4J8hNj>
.
|
i will check the log after sleep; but after work hah |
I am using VoodooPS2Controller.kext, but it is in /S/L/E along with
IntelBacklight.kext (patched).
…On 4 May 2017 at 15:10, Craig Cooper ***@***.***> wrote:
This is all I have:
FakePCIID_Intel_HD_Graphics.kext
FakePCIID.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC.kext
IntelGraphicsFixup.kext
Lilu.kext
RealtekRTL8111.kext
USBInjectAll.kext
so there shouldn't be any need?!
On 4 May 2017 at 15:09, notly ***@***.***> wrote:
> https://github.com/V5OSX/kexts that's all kexts i have install. maybe i
> will try FakePCIID_XHCIMux.kext (Maybe fix USB Sleep issue)
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AZcroX9JFbvPRA8Ya8R01X6qJILG1JuQks5r2V1ugaJpZM4J8hNj>
> .
>
|
K, it is a requirement for USB3.0 so it doesn't interfere with USB2.0 (and
other hardware)
…On 4 May 2017 at 15:11, notly ***@***.***> wrote:
i will check the log after sleep; but after work hah
myabe USBInjectAll.kext worked. try after home;
👍 @michaelspeed <https://github.com/michaelspeed>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroQeHXfZtI5iCcoSRGfGVoRPfD5SKks5r2V4MgaJpZM4J8hNj>
.
|
I am using ElanTouchPad(ElanTouchPad): ApplePS2SmartTouchPad.kext link - update :Version v4.6.5 (10 - 12 - 2016) (work in progress, available to try from attachments). cause elan touchpad |
OK, I did not require that...
My WiFi just shutdown, but I do not think it was related to Sleep...
someone is working on DSLAM outside :-/
…On 4 May 2017 at 15:14, notly ***@***.***> wrote:
I am using ElanTouchPad(ElanTouchPad): ApplePS2SmartTouchPad.kext link -
update :Version v4.6.5 (10 - 12 - 2016) (work in progress, available to try
from attachments). cause elan touchpad
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcrofvClzZINBx7joteShLofb_4c4yFks5r2V7NgaJpZM4J8hNj>
.
|
@michaelspeed USBInjectAll.kext will fix usb sleep issue.... wifi maybe BCM43228 802.11n Wireless will work well... |
Hi! I have the i3 model, 573g-326z, and I successfully installed Yosemite but now i want to update to Sierra and I have some issues. When I boot from the usb burned with the installer of Sierra 10.12.4 it give me kernel panic after the Apple logo, no log, nothing in verbose mode, what can I do? I'm using the clover folder provided by macmeister1967 in this discussion |
My Clover folder is for the 573 only, it is missing the NVIDIA DSDT/SSDT
patches so graciously provided by Kaijun. Take a look at the dedicated DSDT
patching section linked on the main page for ideas on getting this
working...
NOTE: I do NOT have HDMI audio working yet :-(
…On 7 July 2017 at 00:07, Marco De Santis ***@***.***> wrote:
Hi! I have the i3 model, 573g-326z, and I successfully installed Yosemite
but now i want to update to Sierra and I have some issues. When I boot from
the usb burned with the installer of Sierra 10.12.4 it give me kernel panic
after the Apple logo, no log, nothing in verbose mode, what can I do? I'm
using the clover folder provided by macmeister1967 in this discussion
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcroUEqT80hQEZBxInw3x8ttxojko0nks5sLOoWgaJpZM4J8hNj>
.
|
Okay thanks for the fast reply ;), I will try soon @macmeister1967 |
I have the same problem as hehljo: I don't manage to install Sierra. I am quite experienced with hackintosh on this computer: I installed 10.9 and 10.11. I still manage to install 10.11 but not 10.12. Using a USB stick to start the installer, I get a garbled screen in UEFI mode (as for the 10.9 and 10.11 installers). In Legacy mode, the installer won't start: in verbose mode, I just see a non-blinking cursor for about 10 seconds, after which the computer restarts. When I try a direct install of 10.12 from 10.11, the first part seems to work fine and the computer restarts after counting down its 30 seconds but Clover doesn't show the installer as boot option, so I cannot boot into the installer to finish the second part of the process. Do I need to have BIOS v2.30? I haven't found a way to update the BIOS without Windows. Does anybody has an idea how to solve this? I don't think hehljo did. Any help would be appreciated! |
Install Lilu.kext and IntelGraphicsFixup.kext
;-)
…On 10 August 2017 at 06:12, sughero007 ***@***.***> wrote:
I have the same problem as hehljo: I don't manage to install Sierra. I am
quite experienced with hackintosh on this computer: I installed 10.9 and
10.11. I still manage to install 10.11 but not 10.12. Using a USB stick to
start the installer, I get a garbled screen in UEFI mode (as for the 10.9
and 10.11 installers). In Legacy mode, the installer won't start: in
verbose mode, I just see a non-blinking cursor for about 10 seconds, after
which the computer restarts. When I try a direct install of 10.12 from
10.11, the first part seems to work fine and the computer restarts after
counting down its 30 seconds but Clover doesn't show the installer as boot
option, so I cannot boot into the installer to finish the second part of
the process.
Do I need to have BIOS v2.30? I haven't found a way to update the BIOS
without Windows.
Does anybody has an idea how to solve this? I don't think hehljo did. Any
help would be appreciated!
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZcrodR00lL-QWAtaRZKlOQbXWVZTe3_ks5sWhLKgaJpZM4J8hNj>
.
|
You update BIOS from UEFI using an EFI file... it should be included.
Without this, the laptop will not shutdown...
…On 10 August 2017 at 12:01, Craig Cooper ***@***.***> wrote:
Install Lilu.kext and IntelGraphicsFixup.kext
;-)
On 10 August 2017 at 06:12, sughero007 ***@***.***> wrote:
> I have the same problem as hehljo: I don't manage to install Sierra. I am
> quite experienced with hackintosh on this computer: I installed 10.9 and
> 10.11. I still manage to install 10.11 but not 10.12. Using a USB stick to
> start the installer, I get a garbled screen in UEFI mode (as for the 10.9
> and 10.11 installers). In Legacy mode, the installer won't start: in
> verbose mode, I just see a non-blinking cursor for about 10 seconds, after
> which the computer restarts. When I try a direct install of 10.12 from
> 10.11, the first part seems to work fine and the computer restarts after
> counting down its 30 seconds but Clover doesn't show the installer as boot
> option, so I cannot boot into the installer to finish the second part of
> the process.
>
> Do I need to have BIOS v2.30? I haven't found a way to update the BIOS
> without Windows.
>
> Does anybody has an idea how to solve this? I don't think hehljo did. Any
> help would be appreciated!
>
> —
> You are receiving this because you were mentioned.
> Reply to this email directly, view it on GitHub
> <#42 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AZcrodR00lL-QWAtaRZKlOQbXWVZTe3_ks5sWhLKgaJpZM4J8hNj>
> .
>
|
I'll check my files, I may still have a copy... I am using V5-573 NON-G
tho...
…On 10 August 2017 at 12:02, Craig Cooper ***@***.***> wrote:
You update BIOS from UEFI using an EFI file... it should be included.
Without this, the laptop will not shutdown...
On 10 August 2017 at 12:01, Craig Cooper ***@***.***> wrote:
> Install Lilu.kext and IntelGraphicsFixup.kext
>
> ;-)
>
> On 10 August 2017 at 06:12, sughero007 ***@***.***> wrote:
>
>> I have the same problem as hehljo: I don't manage to install Sierra. I
>> am quite experienced with hackintosh on this computer: I installed 10.9 and
>> 10.11. I still manage to install 10.11 but not 10.12. Using a USB stick to
>> start the installer, I get a garbled screen in UEFI mode (as for the 10.9
>> and 10.11 installers). In Legacy mode, the installer won't start: in
>> verbose mode, I just see a non-blinking cursor for about 10 seconds, after
>> which the computer restarts. When I try a direct install of 10.12 from
>> 10.11, the first part seems to work fine and the computer restarts after
>> counting down its 30 seconds but Clover doesn't show the installer as boot
>> option, so I cannot boot into the installer to finish the second part of
>> the process.
>>
>> Do I need to have BIOS v2.30? I haven't found a way to update the BIOS
>> without Windows.
>>
>> Does anybody has an idea how to solve this? I don't think hehljo did.
>> Any help would be appreciated!
>>
>> —
>> You are receiving this because you were mentioned.
>> Reply to this email directly, view it on GitHub
>> <#42 (comment)>,
>> or mute the thread
>> <https://github.com/notifications/unsubscribe-auth/AZcrodR00lL-QWAtaRZKlOQbXWVZTe3_ks5sWhLKgaJpZM4J8hNj>
>> .
>>
>
>
|
Hi guys, thanks for your continuous contributions, actually i bought a new Macintosh and haven't played with this laptop for a long time. |
Thanks for your support. I'll have a look into it. My model is 573G. Kexts
will not make an option visible in clover, but maybe you mean to install
this in the USB stick to allow booting the installer in Legacy mode? Or do
you mean in UEFI mode without getting the screen garbled?
…On Thu, Aug 10, 2017 at 4:21 AM, Kaijun Chen ***@***.***> wrote:
Hi guys, thanks for your continuous contributions, actually i bought a new
Macintosh and haven't played with this laptop for a long time.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#42 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AC6-WD7oEDzfSNc4ftZf9BNrpy7As9chks5sWmkcgaJpZM4J8hNj>
.
|
Hello guys!
I've installed 10.12 GM on my 573g with i5 and basically it's working in 95%. Known issues:
Beside that, I didn't notice any bugs yet...
The text was updated successfully, but these errors were encountered: