Geodesy

Geodesy is a Julia package for working with points in various world and local coordinate systems. The primary feature of Geodesy is to define and perform coordinate transformations in a convenient and safe framework, leveraging the CoordinateTransformations package. Transformations are accurate and efficient and implemented in native Julia code (with many functions being ported from Charles Karney's GeographicLib C++ library), and some common geodetic datums are provided for convenience.

This package is currently in maintenance mode and new features are not being developed. We endeavour to fix any bugs that are reported.

Quick start

Lets define a 3D point by its latitude, longitude and altitude (LLA):

x_lla = LLA(-27.468937, 153.023628, 0.0) # City Hall, Brisbane, Australia

This can be converted to a Cartesian Earth-Centered-Earth-Fixed (ECEF) coordinate simply by calling the constructor

x_ecef = ECEF(x_lla, wgs84)

Here we have used the WGS-84 ellipsoid to calculate the transformation, but other datums such as osgb36, nad27 and grs80 are provided. All transformations use the CoordinateTransformations' interface, and the above is short for

x_ecef = ECEFfromLLA(wgs84)(x_lla)

where ECEFfromLLA is a type inheriting from CoordinateTransformations' Transformation. (Similar names XfromY exist for each of the coordinate types.)

Often, points are measured or required in a local frame, such as the north-east-up coordinates with respect to a given origin. The ENU type represents points in this coordinate system and we may transform between ENU and globally referenced coordinates using ENUfromLLA, etc.

origin_lla = LLA(-27.468937, 153.023628, 0.0) # City Hall, Brisbane, Australia
point_lla = LLA(-27.465933, 153.025900, 0.0)  # Central Station, Brisbane, Australia

# Define the transformation and execute it
trans = ENUfromLLA(origin_lla, wgs84)
point_enu = trans(point_lla)

# Equivalently
point_enu = ENU(point_lla, origin_lla, wgs84)

Similarly, we could convert to UTM/UPS coordinates, and two types are provided for this - UTM stores 3D coordinates x, y, and z in an unspecified zone, while UTMZ includes the zone number and hemisphere bool (where true = northern, false = southern). To get the canonical zone for your coordinates, simply use:

x_utmz = UTMZ(x_lla, wgs84)

If you are transforming a large number of points to or from a given zone, it may be more effective to define the transformation explicitly and use the lighter UTM storage type.

points_lla::Vector{LLA{Float64}}
utm_from_lla = UTMfromLLA(56, false, wgs84) # Zone 56-South
points_utm = map(utm_from_lla, points_lla) # A new vector of UTM coordinates

Geodesy becomes particularly powerful when you chain together transformations. For example, you can define a single transformation from your data on disk in UTM coordinates to a local frame in ENU coordinates. Internally, this will perform UTM (+ zone) → LLA → ECEF → ENU via composing transformations with ∘ into a ComposedTransformation:

julia> origin = LLA(-27.468937, 153.023628, 0.0) # City Hall, Brisbane, Australia
LLA(lat=-27.468937°, lon=153.023628°, alt=0.0)

julia> trans = ENUfromUTMZ(origin, wgs84)
(ENUfromECEF(ECEF(-5.046925124630393e6, 2.5689157252069353e6, -2.924416653602336e6), lat=-27.468937°, lon=153.023628°) ∘ (ECEFfromLLA(wgs84) ∘ LLAfromUTMZ(wgs84)))

This transformation can then be composed with rotations and translations in CoordinateTransformations (or your own custom-defined AbstractTransformation to define further reference frames. For example, in this way, a point measured by a scanner on a moving vehicle at a particular time may be globally georeferenced with a single call to the Transformation!

Finally, the Cartesian distance between world points can be calculated via automatic transformation to a Cartesian frame:

x_lla = LLA(-27.468937, 153.023628, 0.0) # City Hall, Brisbane, Australia
y_lla = LLA(-27.465933, 153.025900, 0.0) # Central Station, Brisbane, Australia
euclidean_distance(x_lla, y_lla)                   # 401.54 meters

(assuming the wgs84 datum, which can be configured in distance(x, y, datum)).

Alternatives

• CoordRefSystems.jl - Native Julia implementation with built-in support for units, widely tested against the PROJ C library.
• MapMaths.jl - Native Julia implementation with support for the WGS84 datum and local coordinates.
• Proj.jl - Julia wrapper for the PROJ C library, which provides a wide range of coordinate system transformations and projections.

Basic Terminology

This section describes some terminology and concepts that are relevant to Geodesy.jl, attempting to define Geodesy-specific jargon where possible. For a longer, less technical discussion with more historical context, ICSM's Fundamentals of Mapping page is highly recommended.

Coordinate Reference Systems and Spatial Reference Identifiers

A position on the Earth can be given by some numerical coordinate values, but those don't mean much without more information. The extra information is called the Coordinate Reference System or CRS (also known as a Spatial Reference System or SRS). A CRS tells you two main things:

• The measurement procedure: which real world objects were used to define the frame of reference or datum of the measurement?
• The coordinate system: how do coordinate numerical values relate to the reference frame defined by the datum?

The full specification of a CRS can be complex, so a short label called a Spatial Reference IDentifier or SRID is usually used instead. For example, EPSG:4326 is one way to refer to the 2D WGS84 latitude and longitude you'd get from a mobile phone GPS device. An SRID is of the form AUTHORITY:CODE, where the code is a number and the authority is the name of an organization maintaining a list of codes with associated CRS information. There are services where you can look up a CRS, for example, http://epsg.io is a convenient interface to the SRIDs maintained by the European Petroleum Survey Group (EPSG) authority. Likewise, http://spatialreference.org is an open registry to which anyone can contribute.

When maintaining a spatial database, it's typical to define an internal list of SRIDs (effectively making your organization the authority), and a mapping from these to CRS information. A link back to a definitive SRID from an external authority should also be included where possible.

Datums

In spatial measurement and positioning, a datum is a set of reference objects with given coordinates, relative to which other objects may be positioned. For example, in traditional surveying a datum might comprise a pair of pegs in the ground, separated by a carefully measured distance. When surveying the position of an unknown but nearby point, the angle back to the original datum objects can be measured using a theodolite. After this, the relative position of the new point can be computed using simple triangulation. Repeating this trick with any of the now three known points, an entire triangulation network of surveyed objects can be extended outward. Any point surveyed relative to the network is said to be measured in the datum of the original objects. Datums are often named with an acronym, for example OSGB36 is the Ordnance Survey of Great Britain, 1936.

In the era of satellite geodesy, coordinates are determined for an object by timing signals from a satellite constellation (eg, the GPS satellites) and computing position relative to those satellites. Where is the datum here? At first glance the situation seems quite different from the traditional setup described above. However, the satellite positions as a function of time (ephemerides, in the jargon) must themselves be defined relative to some frame. This is done by continuously observing the satellites from a set of highly stable ground stations equipped with GPS receivers. It is the full set of these ground stations and their assigned coordinates which form the datum.

Let's inspect the flow of positional information in both cases:

• For traditional surveying,

  datum object positions -> triangulation network -> newly surveyed point
  

• For satellite geodesy,

  datum object positions -> satellite ephemerides -> newly surveyed point
  

We see that the basic nature of a datum is precisely the same regardless of whether we're doing a traditional survey or using a GPS receiver.

Terrestrial reference systems and frames

Coordinates for new points are measured by transferring coordinates from the datum objects, as described above. However, how do we decide on coordinates for the datum objects themselves? This is purely a matter of convention, consistency and measurement.

For example, the International Terrestrial Reference System (ITRS) is a reference system that rotates with the Earth so that the average velocity of the crust is zero. That is, in this reference system the only crust movement is geophysical. Roughly speaking, the defining conventions for the ITRS are:

• Space is modeled as a three-dimensional Euclidean affine space.
• The origin is at the center of mass of the Earth (it is geocentric).
• The z-axis is the axis of rotation of the Earth.
• The scale is set to 1 SI meter.
• The x-axis is orthogonal to the z-axis and aligns with the international reference meridian through Greenwich.
• The y-axis is set to the cross product of the z and x axes, forming a right handed coordinate frame.
• Various rates of change of the above must also be specified, for example, the scale should stay constant in time.

The precise conventions are defined in chapter 4 of the IERS conventions published by the International Earth Rotation and Reference Service (IERS). These conventions define an ideal reference system, but they're useless without physical measurements that give coordinates for a set of real world datum objects. The process of measuring and computing coordinates for datum objects is called realizing the reference system and the result is called a reference frame. For example, the International Terrestrial Reference Frame of 2014 (ITRF2014) realizes the ITRS conventions using raw measurement data gathered in the 25 years prior to 2014.

To measure and compute coordinates, several space geodesy techniques are used to gather raw measurement data; currently the IERS includes VLBI (very long baseline interferometry) of distant astronomical radio sources, SLR (satellite laser ranging), GPS (global positioning system) and DORIS (gosh these acronyms are tiring). The raw data is not in the form of positions, but must be condensed down in a large scale fitting problem, ideally by requiring physical and statistical consistency of all measurements, tying measurements at different sites together with physical models.

Coordinate systems

In geometry, a coordinate system is a system which uses one or more numbers, or coordinates to uniquely determine the position of a point in a mathematical space such as Euclidean space. For example, in geodesy a point is commonly referred to using geodetic latitude, longitude and height relative to a given reference ellipsoid; this is called a geodetic coordinate system.

An ellipsoid is chosen because it's a reasonable model for the shape of the Earth and its gravitational field without being overly complex; it has only a few parameters, and a simple mathematical form. The term spheroid is also used because the ellipsoids in use today are rotationally symmetric around the pole. Note that there's several ways to define latitude on an ellipsoid. The most natural for geodesy is geodetic latitude, used by default because it's physically accessible in any location as a good approximation to the angle between the gravity vector and the equatorial plane. (This type of latitude is not an angle measured at the centre of the ellipsoid, which may be surprising if you're used to spherical coordinates!)

There are usually several useful coordinate systems for the same space. As well as the geodetic coordinates mentioned above, it's common to see

• The x,y,z components in an Earth-Centred Cartesian coordinate system rotating with the Earth. This is conventionally called an Earth-Centred Earth-Fixed (ECEF) coordinate system. This is a natural coordinate system in which to define coordinates for the datum objects defining a terrestrial reference frame.
• The east,north and up ENU components of a Cartesian coordinate frame at a particular point on the ellipsoid. This coordinate system is useful as a local frame for navigation.
• Easting,northing and vertical components of a projected coordinate system or map projection. There's an entire zoo of these, designed to represent the curved surface of an ellipsoid with a flat map.

Different coordinates systems provide different coordinates for the same point, so it's obviously important to specify exactly which coordinate system you're using. In particular, you should specify which ellipsoid parameters are in use if you deal with latitude and longitude, as in principle you could have more than one ellipsoid. This is a point of confusion, because a datum in geodesy also comes with a reference ellipsoid as a very strong matter of convention (thus being called a geodetic datum).

With its conventional ellipsoid, a geodetic datum also defines a conventional geodetic coordinate system, thus bringing together concepts which are interconnected but conceptually distinct. To emphasize:

• A coordinate system is a mathematical abstraction allowing us to manipulate geometric quantities using numeric and algebraic techniques. By itself, mathematical geometry is pure abstraction without a connection to the physical world.
• A datum is a set of physical objects with associated coordinates, thereby defining a reference frame in a way which is physically accessible. A datum is the bridge which connects physical reality to the abstract ideal of mathematical geometry, via the algebraic mechanism of a coordinate system.

The API

Coordinate types

Geodesy provides several in-built coordinate storage types for convenience and safety. The philosophy is to avoid carrying around raw data in generic containers like Vectors with no concept of what coordinate system it is in.

LLA{T} - latitude, longitude and altitude

The global LLA type stores data in a lat-lon-alt order, where latitude and longitude are expected in degrees (not radians). A keyword constructor, LLA(lat=x, lon=y, alt=z), is also provided to help with having to remember the storage order.

LatLon{T} - latitude and longitude

The 2D LatLon type stores data in a lat-lon order, where latitude and longitude are expected in degrees (not radians). A keyword constructor, LatLon(lat=x, lon=y), is also provided. LatLon is currently the only supported 2D coordinate.

ECEF{T} - Earth-centered, Earth-fixed

The global ECEF type stores Cartesian coordinates x, y, z, according to the usual convention. Being a Cartesian frame, ECEF is a subtype of StaticArrays' StaticVector and they can be added and subtracted with themselves and other vectors.

UTM{T} - universal transverse-Mercator

The UTM type encodes the easting x, northing y and height z of a UTM coordinate in an unspecified zone. This data type is also used to encode universal polar-stereographic (UPS) coordinates (where the zone is 0).

UTMZ{T} - universal transverse-Mercator + zone

In addition to the easting x, northing y and height z, the global UTMZ type also encodes the UTM zone and hemisphere, where zone is a UInt8 and hemisphere is a Bool for compact storage. The northern hemisphere is denoted as true, and the southern as false. Zone 0 corresponds to the UPS projection about the corresponding pole, otherwise zone is an integer between 1 and 60.

ENU{T} - east-north-up

The ENU type is a local Cartesian coordinate that encodes a point's distance towards east e, towards north n and upwards u with respect to an unspecified origin. Like ECEF, ENU is also a subtype of StaticVector.

Geodetic Datums

Geodetic datums are modelled as subtypes of the abstract type Datum. The associated ellipsoid may be obtained by calling the ellipsoid() function, for example, ellipsoid(NAD83()).

There are several pre-defined datums. Worldwide datums include

• WGS84 - standard GPS datum for moderate precision work (representing both the latest frame realization, or if time is supplied a discontinuous dynamic datum where time looks up the frame implementation date in the broadcast ephemerides.)
• WGS84{GpsWeek} - specific realizations of the WGS84 frame.
• ITRF{Year} - Realizations of the International Terrestrial Reference System for high precision surveying.

National datums include

• OSGB36 - Ordnance Survey of Great Britain of 1936.
• NAD27, NAD83 - North American Datums of 1927 and 1983, respectively
• GDA94 - Geocentric Datum of Australia, 1994.

Datums may also be passed to coordinate transformation constructors such as transverse-Mercator and polar-stereographic projections in which case the associated ellipsoid will be extracted to form the transformation. For datums without extra parameters (everything except ITRF and WGS84{Week}) there is a standard instance defined to reduce the amount of brackets you have to type. For example, LLAfromECEF(NAD83()) and LLAfromECEF(nad83) are equivalent.

Transformations and conversions

Geodesy provides two interfaces changing coordinate systems.

"Transformations" are based on CoordinateTransformations interface for defining AbstractTransformations and allow the user to apply them by calling them, invert them with inv() and compose them with compose() or ∘. The transformations cache any possible pre-calculations for efficiency when the same transformation is applied to many points.

"Conversions" are based on type-constructors, obeying simple syntax like LLA(ecef, datum). The datum or other information is always necessary, as no assumptions are made by Geodesy for safety and consistency reasons. Similarly, Base.convert is not defined because, without assumptions, it would require additional information. The main drawback of this approach is that some calculations may not be pre-cached (for instance, the origin of an ENU transformation).

Between LLA and ECEF

The LLAfromECEF and ECEFfromLLA transformations require an ellipsoidal datum to perform the conversion. The exact transformation is performed in both directions, using a port the ECEF → LLA transformation from GeographicLib.

Note that in some cases where points are very close to the centre of the ellipsoid, multiple equivalent LLA points are valid solutions to the transformation problem. Here, as in GeographicLib, the point with the greatest altitude is chosen.

Between LLA and UTM/UTMZ

The LLAfromUTM(Z) and UTM(Z)fromLLA transformations also require an ellipsoidal datum to perform the conversion. The transformation retains a cache of the parameters used in the transformation, which in the case of the transverse-Mercator projection leads to a significant saving.

In all cases zone 0 corresponds to the UPS coordinate system, and the polar-stereographic projection of GeographicLib has been ported to Julia to perform the transformation.

An approximate, 6th-order expansion is used by default for the transverse-Mercator projection and its inverse (though orders 4-8 are defined). The algorithm is a native Julia port of that used in GeographicLib, and is accurate to nanometers for up to several UTM zones away from the reference meridian. However, the series expansion diverges at ±90° from the reference meridian. While the UTMZ-methods will automatically choose the canonical zone and hemisphere for the input, extreme care must be taken to choose an appropriate zone for the UTM methods. (In the future, we implement the exact UTM transformation as a fallback — contributions welcome!)

There is also UTMfromUTMZ and UTMZfromUTM transformations that are helpful for converting between these two formats and putting data into the same UTM zone.

To and from local ENU frames

The ECEFfromENU and ENUfromECEF transformations define the transformation around a specific origin. Both the origin coordinates as an ECEF as well as its corresponding latitude and longitude are stored in the transformation for maximal efficiency when performing multiple transforms. The transformation can be inverted with inv to perform the reverse transformation with respect to the same origin.

Web Mercator support

We support the Web Mercator / Pseudo Mercator projection with the WebMercatorfromLLA and LLAfromWebMercator transformations for interoperability with many web mapping systems. The scaling of the northing and easting is defined to be meters at the Equator, the same as how proj handles this (see https://proj.org/operations/projections/webmerc.html ).

If you need to deal with web mapping tile coordinate systems (zoom levels and pixel coordinates, etc) these could be added by composing another transformation on top of the web mercator projection defined in this package.

Composed transformations

Many other methods are defined as convenience constructors for composed transformations, to go between any two of the coordinate types defined here. These include:

• ECEFfromUTMZ(datum) = ECEFfromLLA(datum) ∘ LLAfromUTMZ(datum)
• UTMZfromECEF(datum) = UTMZfromLLA(datum) ∘ LLAfromECEF(datum)
• UTMfromECEF(zone, hemisphere, datum) = UTMfromLLA(zone, hemisphere, datum) ∘ LLAfromECEF(datum)
• ECEFfromUTM(zone, hemisphere, datum) = ECEFfromLLA(datum) ∘ LLAfromUTM(zone, hemisphere, datum)
• ENUfromLLA(origin, datum) = ENUfromECEF(origin, datum) ∘ ECEFfromLLA(datum)
• LLAfromENU(origin, datum) = LLAfromECEF(datum) ∘ ECEFfromENU(origin, datum)
• ECEFfromUTMZ(datum) = ECEFfromLLA(datum) ∘ LLAfromUTMZ(datum)
• ENUfromUTMZ(origin, datum) = ENUfromLLA(origin, datum) ∘ LLAfromUTMZ(datum
• UTMZfromENU(origin, datum) = UTMZfromLLA(datum) ∘ LLAfromENU(origin, datum)
• UTMfromENU(origin, zone, hemisphere, datum) = UTMfromLLA(zone, hemisphere, datum) ∘ LLAfromENU(origin, datum)
• ENUfromUTM(origin, zone, hemisphere, datum) = ENUfromLLA(origin, datum) ∘ LLAfromUTM(zone, hemisphere, datum)

Constructor-based transforms for these are also provided, such as UTMZ(ecef, datum) which converts to LLA as an intermediary, as above. When converting multiple points to or from the same ENU reference frame, it is recommended to use the transformation-based approach for efficiency. However, the other constructor-based conversions should be similar in speed to their transformation counterparts.

Distance

Currently, the only defined distance measure is the straight-line or Euclidean distance, euclidean_distance(x, y, [datum = wgs84]), which works for all combinations of types for x and y - except that the UTM zone and hemisphere must also be provided for UTM types, as in euclidean_distance(utm1, utm2, zone, hemisphere, [datum = wgs84]) (the Cartesian distance for UTM types is not approximated, but achieved via conversion to ECEF).

This is the only function currently in Geodesy which takes a default datum, and should be relatively accurate for close points where Euclidean distances are most important. Future work may focus on geodesics and related calculations (contributions welcome!).