Add missing generic repeat method

Project.toml

@@ -1,6 +1,6 @@
 name = "ChainRules"
 uuid = "082447d4-558c-5d27-93f4-14fc19e9eca2"
-version = "1.8.1"
+version = "1.9"
 
 [deps]
 ChainRulesCore = "d360d2e6-b24c-11e9-a2a3-2a2ae2dbcce4"

src/rulesets/Base/array.jl

@@ -68,54 +68,39 @@ end
 #####
 ##### `repeat`
 #####
-
 function rrule(::typeof(repeat), xs::AbstractArray; inner=ntuple(_->1, ndims(xs)), outer=ntuple(_->1, ndims(xs)))
 
+    project_Xs = ProjectTo(xs)
+    S = size(xs)
     function repeat_pullback(ȳ)
         dY = unthunk(ȳ)
         Δ′ = zero(xs)
-        S = size(xs)
-
         # Loop through each element of Δ, calculate source dimensions, accumulate into Δ′
         for (dest_idx, val) in pairs(IndexCartesian(), dY)
             # First, round dest_idx[dim] to nearest gridpoint defined by inner[dim], then
             # wrap around based on original size S.
             src_idx = [mod1(div(dest_idx[dim] - 1, inner[dim]) + 1, S[dim]) for dim in 1:length(S)]
             Δ′[src_idx...] += val
         end
-        return (NoTangent(), Δ′)
+        x̄ = project_Xs(Δ′)
+        return (NoTangent(), x̄)
     end
 
     return repeat(xs; inner = inner, outer = outer), repeat_pullback
 end
 
-function rrule(::typeof(repeat), xs::AbstractVector, m::Integer)
+function rrule(::typeof(repeat), xs::AbstractArray, counts::Integer...)
 
-    d1 = size(xs, 1)
+    project_Xs = ProjectTo(xs)
+    S = size(xs)
     function repeat_pullback(ȳ)
-        Δ′ = dropdims(sum(reshape(ȳ, d1, :); dims=2); dims=2)
-        return (NoTangent(), Δ′, NoTangent())
-    end
-
-    return repeat(xs, m), repeat_pullback
-end
-
-function rrule(::typeof(repeat), xs::AbstractVecOrMat, m::Integer, n::Integer)
-    d1, d2 = size(xs, 1), size(xs, 2)
-    function repeat_pullback(ȳ)
-        ȳ′ = reshape(ȳ, d1, m, d2, n)
-        return NoTangent(), reshape(sum(ȳ′; dims=(2,4)), (d1, d2)), NoTangent(), NoTangent()
+        dY = unthunk(ȳ)
+        size2ndims = ntuple(d -> isodd(d) ? get(S, 1+d÷2, 1) : get(counts, d÷2, 1), 2*ndims(dY))
+        reduced = sum(reshape(dY, size2ndims); dims = ntuple(d -> 2d, ndims(dY)))
+        x̄ = project_Xs(reshape(reduced, S))
+        return (NoTangent(), x̄, map(_->NoTangent(), counts)...)
     end
-
-    return repeat(xs, m, n), repeat_pullback
-end
-
-function rrule(T::typeof(repeat), xs::AbstractVecOrMat, m::Integer)
-
-    # Workaround use of positional default (i.e. repeat(xs, m, n = 1)))
-    y, full_pb = rrule(T, xs, m, 1)
-    repeat_pullback(ȳ) = full_pb(ȳ)[1:3]
-    return y, repeat_pullback
+    return repeat(xs, counts...), repeat_pullback
 end
 
 #####

test/rulesets/Base/array.jl

@@ -43,27 +43,35 @@ end
 end
 
 @testset "repeat" begin
+
     test_rrule(repeat, rand(4, ))
-    test_rrule(repeat, rand(4, ), 2)
     test_rrule(repeat, rand(4, 5))
     test_rrule(repeat, rand(4, 5); fkwargs = (outer=(1,2),))
     test_rrule(repeat, rand(4, 5); fkwargs = (inner=(1,2), outer=(1,3)))
 
+    test_rrule(repeat, rand(4, ), 2; check_inferred=VERSION>=v"1.6")
+    test_rrule(repeat, rand(4, 5), 2; check_inferred=VERSION>=v"1.6")
+    test_rrule(repeat, rand(4, 5), 2, 3; check_inferred=VERSION>=v"1.6")
+    test_rrule(repeat, rand(1,2,3), 2,3,4; check_inferred=VERSION>v"1.6")
+    test_rrule(repeat, rand(0,2,3), 2,0,4; check_inferred=VERSION>v"1.6")
+    test_rrule(repeat, rand(1,1,1,1), 2,3,4,5; check_inferred=VERSION>v"1.6")
+
+
     if VERSION>=v"1.6"
-        # repeat([1 2; 3 4], inner=(2,4), outer=(1,1,1,3)) fails for v<1.6
+        # These are cases where repeat itself fails in earlier versions
         test_rrule(repeat, rand(4, 5); fkwargs = (inner=(2,4), outer=(1,1,1,3)))
-    end
-    test_rrule(repeat, rand(4, 5), 2; check_inferred=VERSION>=v"1.5")
-    test_rrule(repeat, rand(4, 5), 2, 3)
+        test_rrule(repeat, rand(1,2,3), 2,3)
+        test_rrule(repeat, rand(1,2,3), 2,3,4,2)
+        test_rrule(repeat, fill(1.0), 2)
+        test_rrule(repeat, fill(1.0), 2, 3)
 
-    # zero-arrays: broken
-    @test_broken rrule(repeat, fill(1.0), 2) !== nothing
-    @test_broken rrule(repeat, fill(1.0), 2, 3) !== nothing
+        # These fail for other v1.0 related issues (add!!)
+        # v"1.0": fill(1.0) + fill(1.0) != fill(2.0)
+        # v"1.6: fill(1.0) + fill(1.0) == fill(2.0) # Expected
+        test_rrule(repeat, fill(1.0); fkwargs = (inner=2,))
+        test_rrule(repeat, fill(1.0); fkwargs = (inner=2, outer=3,))
 
-    # These dispatch but probably needs
-    # https://github.com/JuliaDiff/FiniteDifferences.jl/issues/179
-    # test_rrule(repeat, fill(1.0); fkwargs = (inner=2,))
-    # test_rrule(repeat, fill(1.0); fkwargs = (inner=2, outer=3,))
+    end
 
     @test rrule(repeat, [1,2,3], 4)[2](ones(12))[2] == [4,4,4]
     @test rrule(repeat, [1,2,3], outer=4)[2](ones(12))[2] == [4,4,4]