use common safeboot flags (#19282) #352
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Jason2866
added a commit
that referenced
this pull request
Aug 16, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 16, 2023
* Improvements to thermostat debug output (arendst#19279) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add section safeboot_flags in platform_tasmota32.ini (arendst#19281) This will make it easier to ignore a bunch of libraries in order to speed up builds without polluting the ENV sections too much. Usage: [env:my_safeboot_env] lib_ignore = ${safeboot_flags.lib_ignore} * use common safeboot flags (arendst#19282) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * fix IRAM_ATTR specified both in function declaration and definition (arendst#19286) * Improvements to PID controller driver (arendst#19285) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add: display PID status and key info on web output * fix: remove extraneous comments that included unused code fragments * add: local sensor handling improvements add: define a local sensor name add: define the local sensor measurement parameter add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs add: include interval since which sensor data was last updated fix: properly update the maximum interval time so missing sensor data is properly alerted * Update xdrv_49_pid.ino * Typo architceture → architecture (arendst#19288) * avoid unnecessary compiling of specific libraries in lib32_div for most builds (arendst#19293) * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * ESP32: pass flashmode at build time to macro definition (arendst#19299) * pass flashmode at build time to macro definition * fix 8266 builds * fix: properly detect device is offline after maximum misses reached (arendst#19298) * fix c6 env * Update changelogs * [DS18x20] Enhance use of aliases (arendst#19026) * [DS18x20] Enhance use of aliases `defineDS18x20_USE_ID_AS_NAME`: Always show part of the address, even for one sensor `#define DS18x20_USE_ID_ALIAS`: The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name * [DS18x20] change to calloc() * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix OneWire for IDF5.1 and C2/C6 (arendst#19303) * fix OneWire for IDF5.1 and C2/C6 * Use Onewire in arduino30 builds * use SOC specific defines for C2,C3 and C6 * Removes software based no load threshold. (arendst#19302) Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels. * Update changelogs * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * Creates a place to put the customer boards (arendst#19309) * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * Add commands to allow setting of timeprop parameters (arendst#19310) * add: commands to set timeprop settings * Update my_user_config.h * fix: properly generated json response to commands * Sync dev with release v13.1 * Update platformio_tasmota32.ini (arendst#19313) --------- Co-authored-by: Paul Blacknell <[email protected]> Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Дилян Палаузов <[email protected]> Co-authored-by: Theo Arends <[email protected]> Co-authored-by: SteWers <[email protected]> Co-authored-by: Christian Baars <[email protected]> Co-authored-by: paulusbrand <[email protected]> Co-authored-by: Martin <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 18, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * latest C6/C2 wip (arendst#19344) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * fix s3 compile * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * override ignore for Arduino 3.0 (arendst#19349) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * use more than pixel * deactivate Addlog storm --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * latest C6/C2 wip (arendst#19344) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * fix s3 compile * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * override ignore for Arduino 3.0 (arendst#19349) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * use more than pixel * deactivate Addlog storm --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * Fix esp8266 Neopixel compile --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * latest C6/C2 wip (arendst#19344) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * fix s3 compile * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * override ignore for Arduino 3.0 (arendst#19349) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) Co-authored-by: Christian Baars <[email protected]> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * use more than pixel * deactivate Addlog storm --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * Fix esp8266 Neopixel compile --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]> * silly bug --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Jason2866
added a commit
that referenced
this pull request
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * latest C6/C2 wip (arendst#19344) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- * fix s3 compile * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * override ignore for Arduino 3.0 (arendst#19349) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (arendst#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- * use more than pixel * deactivate Addlog storm --------- * Fix esp8266 Neopixel compile --------- * silly bug --------- Co-authored-by: Christian Baars <[email protected]> Co-authored-by: Christian Baars <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description:
Related issue (if applicable): fixes #
Checklist:
NOTE: The code change must pass CI tests. Your PR cannot be merged unless tests pass